ESP32-HUB75-MatrixPanel-DMA/examples/GraphicsLayer/GraphicsLayer.ino

158 lines
4.7 KiB
Arduino
Raw Normal View History

2020-12-07 23:42:37 +01:00
/*
2020-12-07 23:44:56 +01:00
* An example that writes to a CRGB FastLED pixel buffer before being ultimately sent
* to the DMA Display.
*
* Faptastic 2020
*
* Note:
* * Layers use lots of RAM (3*WIDTH*HEIGHT bytes per layer to be precise), so use at your own risk.
* * Make sure LAYER_WIDTH and LAYER_HEIGHT are correctly configured in Layer.h !!!
2020-12-07 23:42:37 +01:00
*/
//#define USE_CUSTOM_PINS // uncomment to use custom pins, then provide below
#define A_PIN 26
#define B_PIN 4
#define C_PIN 27
#define D_PIN 2
#define E_PIN 21
#define R1_PIN 5
#define R2_PIN 19
#define G1_PIN 17
#define G2_PIN 16
#define B1_PIN 18
#define B2_PIN 25
#define CLK_PIN 14
#define LAT_PIN 15
#define OE_PIN 13
2020-12-07 23:44:56 +01:00
#include <FastLED.h> // FastLED needs to be installed.
#include "Layer.h" // Layer Library
#include "Fonts/FreeSansBold9pt7b.h" // include adafruit font
/*
* Below is an is the 'legacy' way of initialising the MatrixPanel_I2S_DMA class.
* i.e. MATRIX_WIDTH and MATRIX_HEIGHT are modified by compile-time directives.
* By default the library assumes a single 64x32 pixel panel is connected.
*
* Refer to the example '2_PatternPlasma' on the new / correct way to setup this library
* for different resolutions / panel chain lengths within the sketch 'setup()'.
*
*/
2020-12-07 23:44:56 +01:00
MatrixPanel_I2S_DMA dma_display; // Create HUB75 DMA object
// Create FastLED based graphic 'layers'
2020-12-07 23:44:56 +01:00
Layer bgLayer(dma_display); // Create background Layer
Layer textLayer(dma_display); // Create foreground Layer
2020-12-07 23:42:37 +01:00
2020-12-07 23:44:56 +01:00
int time_counter = 0;
int cycles = 0;
2020-12-07 23:42:37 +01:00
CRGBPalette16 currentPalette;
CRGB currentColor;
CRGB ColorFromCurrentPalette(uint8_t index = 0, uint8_t brightness = 255, TBlendType blendType = LINEARBLEND) {
return ColorFromPalette(currentPalette, index, brightness, blendType);
}
void setup() {
Serial.begin(115200);
Serial.println("*****************************************************");
Serial.println(" HELLO !");
Serial.println("*****************************************************");
#ifdef USE_CUSTOM_PINS
dma_display.begin(R1_PIN, G1_PIN, B1_PIN, R2_PIN, G2_PIN, B2_PIN, A_PIN, B_PIN, C_PIN, D_PIN, E_PIN, LAT_PIN, OE_PIN, CLK_PIN ); // setup the LED matrix
#else
dma_display.begin();
#endif
// fill the screen with 'black'
dma_display.fillScreen(dma_display.color444(0, 0, 0));
// Set current FastLED palette
currentPalette = RainbowColors_p;
2020-12-07 23:44:56 +01:00
// Allocate Background Layer
bgLayer.init();
bgLayer.clear();
bgLayer.setTransparency(false);
// Allocate Canvas Layer
textLayer.init();
textLayer.clear();
/* Step 1: Write some pixels to foreground Layer (use custom layer function)
* Only need to do this once as we're not changing it ever again in this example.
*/
textLayer.drawCentreText("COOL!", MIDDLE, &FreeSansBold9pt7b, CRGB(255,255,255));
textLayer.autoCenterX(); // because I don't trust AdaFruit to perfectly place the contents in the middle
2020-12-07 23:42:37 +01:00
}
2020-12-08 08:35:47 +01:00
int LayerCompositor_mode = 0;
2020-12-07 23:42:37 +01:00
void loop() {
for (int x = 0; x < dma_display.width(); x++) {
for (int y = 0; y < dma_display.height(); y++) {
int16_t v = 0;
uint8_t wibble = sin8(time_counter);
v += sin16(x * wibble * 3 + time_counter);
v += cos16(y * (128 - wibble) + time_counter);
v += sin16(y * x * cos8(-time_counter) / 8);
2020-12-07 23:44:56 +01:00
currentColor = ColorFromPalette(currentPalette, (v >> 8) + 127); //, brightness, currentBlendType);
/*
* Step 2: Write to Background layer! Don't show it on the screen just yet.
* Note: Layer class is designed for FastLED 'CRGB' data type.
*/
bgLayer.drawPixel(x, y, currentColor);
2020-12-07 23:42:37 +01:00
}
}
time_counter += 1;
cycles++;
if (cycles >= 2048) {
time_counter = 0;
cycles = 0;
}
2020-12-07 23:44:56 +01:00
/*
* Step 3: Merge foreground and background layers and send to the matrix panel!
* Use our special sauce LayerCompositor functions
*/
2020-12-08 08:35:47 +01:00
switch (LayerCompositor_mode)
{
case 0:
LayerCompositor::Siloette(dma_display, bgLayer, textLayer);
break;
case 1:
LayerCompositor::Stack(dma_display, bgLayer, textLayer);
break;
case 2:
LayerCompositor::Blend(dma_display, bgLayer, textLayer);
break;
}
EVERY_N_SECONDS(5) { // FastLED Macro
LayerCompositor_mode++;
dma_display.clearScreen();
if (LayerCompositor_mode > 2) LayerCompositor_mode = 0;
}
//
2020-12-07 23:44:56 +01:00
// LayerCompositor::Blend(dma_display, bgLayer, textLayer, 127);
2020-12-07 23:42:37 +01:00
2020-12-07 23:44:56 +01:00
} // end loop