ESP32-HUB75-MatrixPanel-DMA/examples/BufferSwap/BufferSwap.ino

76 lines
1.7 KiB
Arduino
Raw Normal View History

#include <ESP32-RGB64x32MatrixPanel-I2S-DMA.h>
2020-07-30 00:29:42 +02:00
RGB64x32MatrixPanel_I2S_DMA display(true); // Note the TRUE -> Turns of secondary buffer
const byte row0 = 2+0*10;
const byte row1 = 2+1*10;
const byte row2 = 2+2*10;
void setup()
{
// put your setup code here, to run once:
delay(1000); Serial.begin(115200); delay(200);
Serial.println("...Starting Display");
display.begin(); // setup the display with no double buffering
display.setTextColor(display.color565(128, 128, 128));
// Buffer 0 test
display.fillScreen(display.color565(128, 0, 0));
display.setCursor(3, row0);
display.print(F("Buffer 0"));
display.setCursor(3, row1);
display.print(F(" Buffer 0"));
Serial.println("Wrote to to Buffer 0");
display.showDMABuffer();
delay(1500);
// Buffer 1 test
display.flipDMABuffer();
display.fillScreen(display.color565(0, 128, 0)); // shouldn't see this
display.setCursor(3, row0);
display.print(F("Buffer 1"));
display.setCursor(3, row2);
display.print(F(" Buffer 1"));
Serial.println("Wrote to to Buffer 1");
display.showDMABuffer();
delay(1500);
}
void loop() {
// Flip the back buffer
display.flipDMABuffer();
// Write: Set bottow row to black
for (int y=20;y<MATRIX_HEIGHT; y++)
for (int x=0;x<MATRIX_WIDTH; x++)
{
display.drawPixelRGB888( x, y, 0, 0, 0);
}
// Write: Set bottom row to blue (this is what should show)
for (int y=20;y<MATRIX_HEIGHT; y++)
for (int x=0;x<MATRIX_WIDTH; x++)
{
display.drawPixelRGB888( x, y, 0, 0, 64);
}
// Now show this back buffer
display.showDMABuffer();
delay(1000);
// Flip back buffer
display.flipDMABuffer();
// Show this buffer
display.showDMABuffer();
2019-01-12 18:22:13 +01:00
delay(1000);
}