ScStw/ESP32-HUB75-MatrixPanel-DMA
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

GO_FORPEED now 'FAST-mode'

Browse source 
- ability to change between fast/full refresh modes in runtime
 - optimized bitlogic/loops
 - brigtness control via uint8_t adjusted to matrix width
 - brightnes-control considers fastmode
 - clearScreen() always does full buffer refrash

Signed-off-by: Emil Muratov <gpm@hotplug.ru>
This commit is contained in:
Emil Muratov 2020-12-07 12:25:29 +03:00
parent 7d5f445629
commit 0d8fe4aeff
2 changed files with 187 additions and 271 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

343
ESP32-HUB75-MatrixPanel-I2S-DMA.cpp
View file

@ -112,7 +112,7 @@ bool MatrixPanel_I2S_DMA::allocateDMAmemory()
matrix_row_framebuffer_malloc[malloc_num] = (rowColorDepthStruct *)heap_caps_malloc( (sizeof(rowColorDepthStruct) * _num_frame_buffers) , MALLOC_CAP_DMA); matrix_row_framebuffer_malloc[malloc_num] = (rowColorDepthStruct *)heap_caps_malloc( (sizeof(rowColorDepthStruct) * _num_frame_buffers) , MALLOC_CAP_DMA);
// If the ESP crashes here, then we must have a horribly fragmented memory space, or trying to allocate a ludicrous resolution. // If the ESP crashes here, then we must have a horribly fragmented memory space, or trying to allocate a ludicrous resolution.
#if SERIAL_DEBUG #if SERIAL_DEBUG
Serial.printf("Malloc'ing %d bytes of memory @ address %d for frame row %d.\r\n", (sizeof(rowColorDepthStruct) * _num_frame_buffers), matrix_row_framebuffer_malloc[malloc_num], malloc_num); Serial.printf("Malloc'ing %d bytes of memory @ address %ud for frame row %d.\r\n", (sizeof(rowColorDepthStruct) * _num_frame_buffers), (unsigned int)matrix_row_framebuffer_malloc[malloc_num], malloc_num);
#endif #endif
if ( matrix_row_framebuffer_malloc[malloc_num] == NULL ) { if ( matrix_row_framebuffer_malloc[malloc_num] == NULL ) {
Serial.printf("ERROR: Couldn't malloc matrix_row_framebuffer %d! Critical fail.\r\n", malloc_num); Serial.printf("ERROR: Couldn't malloc matrix_row_framebuffer %d! Critical fail.\r\n", malloc_num);
@ -438,102 +438,18 @@ void MatrixPanel_I2S_DMA::configureDMA(int r1_pin, int g1_pin, int b1_pin, int
* *
* Note: If you change the brightness with setBrightness() you MUST then clearScreen() and repaint / flush the entire framebuffer. * Note: If you change the brightness with setBrightness() you MUST then clearScreen() and repaint / flush the entire framebuffer.
*/ */
//#define GO_FOR_SPEED 1
#ifdef GO_FOR_SPEED
/* Update a specific co-ordinate in the DMA buffer */
void MatrixPanel_I2S_DMA::updateMatrixDMABuffer(int16_t x_coord, int16_t y_coord, uint8_t red, uint8_t green, uint8_t blue)
{
// Check that the co-ordinates are within range, or it'll break everything big time.
// Valid co-ordinates are from 0 to (MATRIX_XXXX-1)
if ( x_coord < 0 || y_coord < 0 || x_coord >= MATRIX_WIDTH || y_coord >= MATRIX_HEIGHT) {
return;
}
// https://ledshield.wordpress.com/2012/11/13/led-brightness-to-your-eye-gamma-correction-no/
red = lumConvTab[red];
green = lumConvTab[green];
blue = lumConvTab[blue];
bool painting_top_frame = true;
if ( y_coord >= ROWS_PER_FRAME) // co-ords start at zero, y_coord = 15 = 16 (rows per frame)
{
y_coord -= ROWS_PER_FRAME; // Subtract the ROWS_PER_FRAME from the pixel co-ord to get the panel ROW (not really the 'y_coord' anymore)
painting_top_frame = false;
}
// We need to update the correct uint16_t in the rowBitStruct array, that gets sent out in parallel
// 16 bit parallel mode - Save the calculated value to the bitplane memory in reverse order to account for I2S Tx FIFO mode1 ordering
int rowBitStruct_x_coord_uint16_t_position = (x_coord % 2) ? (x_coord-1):(x_coord+1);
// Find the memory address for the malloc for this framebuffer row.
rowColorDepthStruct *fb_row_malloc_ptr = (rowColorDepthStruct *) matrix_row_framebuffer_malloc[y_coord];
for(int color_depth_idx=0; color_depth_idx<PIXEL_COLOR_DEPTH_BITS; color_depth_idx++) // color depth - 8 iterations
{
uint8_t mask = (1 << color_depth_idx); // PWM bit colour mask (max 8bits per pixel colour)
// The destination for the pixel bitstream
//rowBitStruct *p = &matrix_framebuffer_malloc_1[back_buffer_id].rowdata[y_coord].rowbits[color_depth_idx]; //matrixUpdateFrames location to write to uint16_t's
// Get the contents at this address, cast as a rowColorDepthStruct
//rowBitStruct *p = &fb_row_malloc_ptr[back_buffer_id].rowbits[color_depth_idx]; //matrixUpdateFrames location to write to uint16_t's
uint16_t &v = fb_row_malloc_ptr[back_buffer_id].rowbits[color_depth_idx].data[rowBitStruct_x_coord_uint16_t_position];
//int v=0; // the output bitstream
if (painting_top_frame) // Painting to pixel in the top half of the HUB75 panel use the R1, B1 and G1 pins
{
// Set the colour of the pixel of interest
// https://stackoverflow.com/questions/47981/how-do-you-set-clear-and-toggle-a-single-bit
if (red & mask) { v|=BIT_R1; } else { v &= ~(BIT_R1); }
if (green & mask) { v|=BIT_G1; } else { v &= ~(BIT_G1); }
if (blue & mask) { v|=BIT_B1; } else { v &= ~(BIT_B1); }
}
else
{ // Paint to a pixel in the bottom half
if (red & mask) { v|=BIT_R2; } else { v &= ~(BIT_R2); }
if (green & mask) { v|=BIT_G2; } else { v &= ~(BIT_G2); }
if (blue & mask) { v|=BIT_B2; } else { v &= ~(BIT_B2); }
} // paint
// 16 bit parallel mode
//Save the calculated value to the bitplane memory in reverse order to account for I2S Tx FIFO mode1 ordering
//p->data[rowBitStruct_x_coord_uint16_t_position] = v;
// NOTE: No need to do this as 'v' is now a reference directly to the frameStruct
} // color depth loop (8)
} // updateMatrixDMABuffer (specific co-ords change)
#else
/* Update a specific co-ordinate in the DMA buffer */ /* Update a specific co-ordinate in the DMA buffer */
/* Original version were we re-create the bitstream from scratch for each x,y co-ordinate / pixel changed. Slightly slower. */ /* Original version were we re-create the bitstream from scratch for each x,y co-ordinate / pixel changed. Slightly slower. */
void MatrixPanel_I2S_DMA::updateMatrixDMABuffer(int16_t x_coord, int16_t y_coord, uint8_t red, uint8_t green, uint8_t blue) void MatrixPanel_I2S_DMA::updateMatrixDMABuffer(int16_t x_coord, int16_t y_coord, uint8_t red, uint8_t green, uint8_t blue)
{ {
if ( !everything_OK ) { if ( !everything_OK ) {
#if SERIAL_DEBUG #if SERIAL_DEBUG
Serial.println("Cannot updateMatrixDMABuffer as setup failed!"); Serial.println("Cannot updateMatrixDMABuffer as setup failed!");
#endif #endif
return; return;
} }
/* LED Brightness Compensation. Because if we do a basic "red & mask" for example,
* we'll NEVER send the dimmest possible colour, due to binary skew.
i.e. It's almost impossible for color_depth_idx of 0 to be sent out to the MATRIX unless the 'value' of a color is exactly '1'
*/
red = lumConvTab[red];
green = lumConvTab[green];
blue = lumConvTab[blue];
/* 1) Check that the co-ordinates are within range, or it'll break everything big time. /* 1) Check that the co-ordinates are within range, or it'll break everything big time.
* Valid co-ordinates are from 0 to (MATRIX_XXXX-1) * Valid co-ordinates are from 0 to (MATRIX_XXXX-1)
*/ */
@ -541,6 +457,15 @@ void MatrixPanel_I2S_DMA::updateMatrixDMABuffer(int16_t x_coord, int16_t y_coord
return; return;
} }
/* LED Brightness Compensation. Because if we do a basic "red & mask" for example,
* we'll NEVER send the dimmest possible colour, due to binary skew.
* i.e. It's almost impossible for color_depth_idx of 0 to be sent out to the MATRIX unless the 'value' of a color is exactly '1'
* https://ledshield.wordpress.com/2012/11/13/led-brightness-to-your-eye-gamma-correction-no/
*/
red = lumConvTab[red];
green = lumConvTab[green];
blue = lumConvTab[blue];
/* When using the drawPixel, we are obviously only changing the value of one x,y position, /* When using the drawPixel, we are obviously only changing the value of one x,y position,
* however, the two-scan panels paint TWO lines at the same time * however, the two-scan panels paint TWO lines at the same time
* and this reflects the parallel in-DMA-memory data structure of uint16_t's that are getting * and this reflects the parallel in-DMA-memory data structure of uint16_t's that are getting
@ -553,58 +478,62 @@ void MatrixPanel_I2S_DMA::updateMatrixDMABuffer(int16_t x_coord, int16_t y_coord
* data. * data.
*/ */
bool painting_top_frame = true; bool painting_top_frame = true;
if ( y_coord >= ROWS_PER_FRAME) // co-ords start at zero, y_coord = 15 = 16 (rows per frame) if ( y_coord >= ROWS_PER_FRAME) // co-ords start at zero, y_coord = 15 => 16 (rows per frame)
{ {
y_coord -= ROWS_PER_FRAME; // Subtract the ROWS_PER_FRAME from the pixel co-ord to get the panel ROW (not really the 'y_coord' anymore) y_coord -= ROWS_PER_FRAME; // Subtract the ROWS_PER_FRAME from the pixel co-ord to get the panel ROW (not really the 'y_coord' anymore)
painting_top_frame = false; painting_top_frame = false;
} }
// We need to update the correct uint16_t in the rowBitStruct array, that gets sent out in parallel
int rowBitStruct_x_coord_uint16_t_position = (x_coord % 2) ? (x_coord-1):(x_coord+1);
for(int color_depth_idx=0; color_depth_idx<PIXEL_COLOR_DEPTH_BITS; color_depth_idx++) // color depth - 8 iterations
{
int mask = (1 << color_depth_idx); // 24 bit color
// The destination for the pixel bitstream
//rowBitStruct *p = &matrix_framebuffer_malloc_1[back_buffer_id].rowdata[y_coord].rowbits[color_depth_idx]; //matrixUpdateFrames location to write to uint16_t's
// Find the memory address for the malloc for this framebuffer row. // Find the memory address for the malloc for this framebuffer row.
rowColorDepthStruct *fb_row_malloc_ptr = (rowColorDepthStruct *) matrix_row_framebuffer_malloc[y_coord]; rowColorDepthStruct *fb_row_malloc_ptr = (rowColorDepthStruct *) matrix_row_framebuffer_malloc[y_coord];
// We need to update the correct uint16_t in the rowBitStruct array, that gets sent out in parallel
// 16 bit parallel mode - Save the calculated value to the bitplane memory in reverse order to account for I2S Tx FIFO mode1 ordering
uint16_t rowBitStruct_x_coord_uint16_t_position = (x_coord % 2) ? (x_coord-1):(x_coord+1);
for(uint8_t color_depth_idx=0; color_depth_idx<PIXEL_COLOR_DEPTH_BITS; color_depth_idx++) // color depth - 8 iterations
{
uint8_t mask = (1 << color_depth_idx); // 24 bit color
// Get the contents at this address, cast as a rowColorDepthStruct // Get the contents at this address, cast as a rowColorDepthStruct
rowBitStruct *p = &fb_row_malloc_ptr[back_buffer_id].rowbits[color_depth_idx]; //matrixUpdateFrames location to write to uint16_t's rowBitStruct *p = &fb_row_malloc_ptr[back_buffer_id].rowbits[color_depth_idx]; //matrixUpdateFrames location to write to uint16_t's
// We need to update the correct uint16_t in the rowBitStruct array, that gets sent out in parallel
uint16_t &v = p->data[rowBitStruct_x_coord_uint16_t_position]; // persist what we already have
if (painting_top_frame)
{ // Need to copy what the RGB status is for the bottom pixels
v &= BITSMASK_RGB1; // reset R1G1B1 bits
// Set the color of the pixel of interest
if (green & mask) { v|=BIT_G1; }
if (blue & mask) { v|=BIT_B1; }
if (red & mask) { v|=BIT_R1; }
// int v = p->data[rowBitStruct_x_coord_uint16_t_position]; // persist what we already have } else { // Do it the other way around
int v=0; // the output bitstream v &= BITSMASK_RGB2; // reset R2G2B2 bits
// Color to set
if (red & mask) { v|=BIT_R2; }
if (green & mask) { v|=BIT_G2; }
if (blue & mask) { v|=BIT_B2; }
} // paint
// if there is no latch to hold address, output ADDX lines directly to GPIO and latch data at end of cycle if (fastmode)
int gpioRowAddress = y_coord; continue;
// normally output current rows ADDX, special case for LSB, output previous row's ADDX (as previous row is being displayed for one latch cycle) // update address/control bits
if(color_depth_idx == 0) v &= BITSMASK_CTRL; // reset ABCDE,EO,LAT address bits
gpioRowAddress = y_coord-1; uint16_t _y = color_depth_idx ? y_coord : y_coord -1;
v|=_y<<8; // shift row coord to match ABCDE bits from 8 to 12 and set bitvector
if (gpioRowAddress & 0x01) v|=BIT_A; // 1
if (gpioRowAddress & 0x02) v|=BIT_B; // 2
if (gpioRowAddress & 0x04) v|=BIT_C; // 4
if (gpioRowAddress & 0x08) v|=BIT_D; // 8
if (gpioRowAddress & 0x10) v|=BIT_E; // 16
// need to disable OE after latch to hide row transition
if((x_coord) == 0 ) v|=BIT_OE;
// drive latch while shifting out last bit of RGB data // drive latch while shifting out last bit of RGB data
if((x_coord) == PIXELS_PER_ROW-1) v|=BIT_LAT; if((x_coord) == PIXELS_PER_ROW-1) v|=BIT_LAT;
// need to turn off OE one clock before latch, otherwise can get ghosting // need to disable OE after latch to hide row transition
if((x_coord)==PIXELS_PER_ROW-2) v|=BIT_OE; // OR one clock before latch, otherwise can get ghosting
if((x_coord) == 0 || (x_coord)==PIXELS_PER_ROW-2){ v|=BIT_OE; continue;}
// turn off OE after brightness value is reached when displaying MSBs if((color_depth_idx > lsbMsbTransitionBit || !color_depth_idx) && ((x_coord) >= brightness))
// MSBs always output normal brightness {v|=BIT_OE; continue;}// For Brightness
// LSB (!color_depth_idx) outputs normal brightness as MSB from previous row is being displayed
if((color_depth_idx > lsbMsbTransitionBit || !color_depth_idx) && ((x_coord) >= brightness)) v|=BIT_OE; // For Brightness
// special case for the bits *after* LSB through (lsbMsbTransitionBit) - OE is output after data is shifted, so need to set OE to fractional brightness // special case for the bits *after* LSB through (lsbMsbTransitionBit) - OE is output after data is shifted, so need to set OE to fractional brightness
if(color_depth_idx && color_depth_idx <= lsbMsbTransitionBit) { if(color_depth_idx && color_depth_idx <= lsbMsbTransitionBit) {
@ -612,7 +541,6 @@ void MatrixPanel_I2S_DMA::updateMatrixDMABuffer(int16_t x_coord, int16_t y_coord
int lsbBrightness = brightness >> (lsbMsbTransitionBit - color_depth_idx + 1); int lsbBrightness = brightness >> (lsbMsbTransitionBit - color_depth_idx + 1);
if((x_coord) >= lsbBrightness) v|=BIT_OE; // For Brightness if((x_coord) >= lsbBrightness) v|=BIT_OE; // For Brightness
} }
/* /*
// Development / testing code only. // Development / testing code only.
Serial.printf("r value of %d, color depth: %d, mask: %d\r\n", red, color_depth_idx, mask); Serial.printf("r value of %d, color depth: %d, mask: %d\r\n", red, color_depth_idx, mask);
@ -620,64 +548,10 @@ void MatrixPanel_I2S_DMA::updateMatrixDMABuffer(int16_t x_coord, int16_t y_coord
Serial.printf("val2pwm r value: %d\r\n", val2PWM(red)); Serial.printf("val2pwm r value: %d\r\n", val2PWM(red));
if (val2PWM(red) & mask) { Serial.println("Success - PWM"); v|=BIT_R2; } if (val2PWM(red) & mask) { Serial.println("Success - PWM"); v|=BIT_R2; }
*/ */
if (painting_top_frame)
{ // Need to copy what the RGB status is for the bottom pixels
// Set the color of the pixel of interest
if (green & mask) { v|=BIT_G1; }
if (blue & mask) { v|=BIT_B1; }
if (red & mask) { v|=BIT_R1; }
// Persist what was painted to the other half of the frame equiv. pixel
if (p->data[rowBitStruct_x_coord_uint16_t_position] & BIT_R2)
v|=BIT_R2;
if (p->data[rowBitStruct_x_coord_uint16_t_position] & BIT_G2)
v|=BIT_G2;
if (p->data[rowBitStruct_x_coord_uint16_t_position] & BIT_B2)
v|=BIT_B2;
}
else
{ // Do it the other way around
// Color to set
if (red & mask) { v|=BIT_R2; }
if (green & mask) { v|=BIT_G2; }
if (blue & mask) { v|=BIT_B2; }
// Copy / persist
if (p->data[rowBitStruct_x_coord_uint16_t_position] & BIT_R1)
v|=BIT_R1;
if (p->data[rowBitStruct_x_coord_uint16_t_position] & BIT_G1)
v|=BIT_G1;
if (p->data[rowBitStruct_x_coord_uint16_t_position] & BIT_B1)
v|=BIT_B1;
} // paint
// 16 bit parallel mode
//Save the calculated value to the bitplane memory in reverse order to account for I2S Tx FIFO mode1 ordering
/*
if(x_coord%2){
p->data[(x_coord)-1] = v;
} else {
p->data[(x_coord)+1] = v;
} // end reordering
*/
// 16 bit parallel mode
p->data[rowBitStruct_x_coord_uint16_t_position] = v;
} // color depth loop (8) } // color depth loop (8)
} // updateMatrixDMABuffer (specific co-ords change) } // updateMatrixDMABuffer (specific co-ords change)
#endif
/* Update the entire buffer with a single specific colour - quicker */ /* Update the entire buffer with a single specific colour - quicker */
@ -695,63 +569,59 @@ void MatrixPanel_I2S_DMA::updateMatrixDMABuffer(uint8_t red, uint8_t green, uint
green = lumConvTab[green]; green = lumConvTab[green];
blue = lumConvTab[blue]; blue = lumConvTab[blue];
for (unsigned int matrix_frame_parallel_row = 0; matrix_frame_parallel_row < ROWS_PER_FRAME; matrix_frame_parallel_row++) // half height - 16 iterations for(uint8_t color_depth_idx=0; color_depth_idx<PIXEL_COLOR_DEPTH_BITS; color_depth_idx++) // color depth - 8 iterations
{ {
for(int color_depth_idx=0; color_depth_idx<PIXEL_COLOR_DEPTH_BITS; color_depth_idx++) // color depth - 8 iterations // let's precalculate RGB1 and RGB2 bits than flood it over the entire DMA buffer
{ uint16_t RGBbitfield = 0;
uint16_t mask = (1 << color_depth_idx); // 24 bit color uint8_t mask = (1 << color_depth_idx); // 24 bit color
// The destination for the pixel bitstream RGBbitfield |= (bool)(blue & mask);
//rowBitStruct *p = &matrix_framebuffer_malloc_1[back_buffer_id].rowdata[matrix_frame_parallel_row].rowbits[color_depth_idx]; //matrixUpdateFrames location to write to uint16_t's RGBbitfield <<= 1;
RGBbitfield |= (bool)(green & mask);
RGBbitfield <<= 1;
RGBbitfield |= (bool)(red & mask);
RGBbitfield |= RGBbitfield << 3; // now we should have 6 bits of RGB suitable for DMA buffer
//Serial.printf("Fill with: 0x%#06x\n", RGBbitfield);
// iterate rows
for (uint16_t matrix_frame_parallel_row = 0; matrix_frame_parallel_row < ROWS_PER_FRAME; matrix_frame_parallel_row++) // half height - 16 iterations
{
rowColorDepthStruct *fb_row_malloc_ptr = (rowColorDepthStruct *) matrix_row_framebuffer_malloc[matrix_frame_parallel_row]; rowColorDepthStruct *fb_row_malloc_ptr = (rowColorDepthStruct *) matrix_row_framebuffer_malloc[matrix_frame_parallel_row];
//Serial.printf("Accessing fb address: %d\r\n", fb_row_malloc_ptr); //Serial.printf("Accessing fb address: %d\r\n", fb_row_malloc_ptr);
// The destination for the pixel bitstream
rowBitStruct *p = &fb_row_malloc_ptr[back_buffer_id].rowbits[color_depth_idx]; //matrixUpdateFrames location to write to uint16_t's rowBitStruct *p = &fb_row_malloc_ptr[back_buffer_id].rowbits[color_depth_idx]; //matrixUpdateFrames location to write to uint16_t's
for(int x_coord=0; x_coord < MATRIX_WIDTH; x_coord++) // row pixel width 64 iterations // iterate pixels in a row
{ if (fastmode){
for(uint16_t x_coord=0; x_coord < MATRIX_WIDTH; x_coord++){
uint16_t &v = p->data[(x_coord % 2) ? (x_coord-1):(x_coord+1)]; // take reference to bit vector
v &= BITSMASK_RGB12; // reset color bits
v |= RGBbitfield; // set new color bits
}
} else {
// Set ABCDE address bits vector
uint16_t _y = color_depth_idx ? matrix_frame_parallel_row : matrix_frame_parallel_row -1;
_y <<=8; // shift row y-coord to match ABCDE bits in vector from 8 to 12
int v=0; // the output bitstream for(uint16_t x_coord=0; x_coord < MATRIX_WIDTH; x_coord++){
uint16_t &v = p->data[(x_coord % 2) ? (x_coord-1):(x_coord+1)]; // persist what we already have
// if there is no latch to hold address, output ADDX lines directly to GPIO and latch data at end of cycle v = RGBbitfield; // set colot bits and reset all others
int gpioRowAddress = matrix_frame_parallel_row; v|=_y; // set ABCDE address bits for current row
// normally output current rows ADDX, special case for LSB, output previous row's ADDX (as previous row is being displayed for one latch cycle)
if(color_depth_idx == 0)
gpioRowAddress = matrix_frame_parallel_row-1;
if (gpioRowAddress & 0x01) v|=BIT_A; // 1
if (gpioRowAddress & 0x02) v|=BIT_B; // 2
if (gpioRowAddress & 0x04) v|=BIT_C; // 4
if (gpioRowAddress & 0x08) v|=BIT_D; // 8
if (gpioRowAddress & 0x10) v|=BIT_E; // 16
/* ORIG
// need to disable OE after latch to hide row transition
if((x_coord) == 0) v|=BIT_OE;
// drive latch while shifting out last bit of RGB data
if((x_coord) == PIXELS_PER_LATCH-1) v|=BIT_LAT;
// need to turn off OE one clock before latch, otherwise can get ghosting
if((x_coord)==PIXELS_PER_LATCH-1) v|=BIT_OE;
*/
// need to disable OE after latch to hide row transition
if((x_coord) == 0 ) v|=BIT_OE;
// drive latch while shifting out last bit of RGB data // drive latch while shifting out last bit of RGB data
if((x_coord) == PIXELS_PER_ROW-1) v|=BIT_LAT; if((x_coord) == PIXELS_PER_ROW-1) v|=BIT_LAT;
// need to turn off OE one clock before latch, otherwise can get ghosting // need to disable OE after latch to hide row transition
if((x_coord)==PIXELS_PER_ROW-2) v|=BIT_OE; // OR one clock before latch, otherwise can get ghosting
if(!x_coord || (x_coord)==PIXELS_PER_ROW-2){
v|=BIT_OE; continue;
}
// BRT OE
// turn off OE after brightness value is reached when displaying MSBs if((color_depth_idx > lsbMsbTransitionBit || !color_depth_idx) && ((x_coord) >= brightness)){
// MSBs always output normal brightness v|=BIT_OE; continue; // For Brightness control
// LSB (!color_depth_idx) outputs normal brightness as MSB from previous row is being displayed }
if((color_depth_idx > lsbMsbTransitionBit || !color_depth_idx) && ((x_coord) >= brightness)) v|=BIT_OE; // For Brightness
// special case for the bits *after* LSB through (lsbMsbTransitionBit) - OE is output after data is shifted, so need to set OE to fractional brightness // special case for the bits *after* LSB through (lsbMsbTransitionBit) - OE is output after data is shifted, so need to set OE to fractional brightness
if(color_depth_idx && color_depth_idx <= lsbMsbTransitionBit) { if(color_depth_idx && color_depth_idx <= lsbMsbTransitionBit) {
@ -759,24 +629,10 @@ void MatrixPanel_I2S_DMA::updateMatrixDMABuffer(uint8_t red, uint8_t green, uint
int lsbBrightness = brightness >> (lsbMsbTransitionBit - color_depth_idx + 1); int lsbBrightness = brightness >> (lsbMsbTransitionBit - color_depth_idx + 1);
if((x_coord) >= lsbBrightness) v|=BIT_OE; // For Brightness if((x_coord) >= lsbBrightness) v|=BIT_OE; // For Brightness
} }
} // end of x-iterator
// Top and bottom matrix MATRIX_ROWS_IN_PARALLEL half colours
if (green & mask) { v|=BIT_G1; v|=BIT_G2; }
if (blue & mask) { v|=BIT_B1; v|=BIT_B2; }
if (red & mask) { v|=BIT_R1; v|=BIT_R2; }
// 16 bit parallel mode
//Save the calculated value to the bitplane memory in reverse order to account for I2S Tx FIFO mode1 ordering
if(x_coord%2) {
p->data[(x_coord)-1] = v;
} else {
p->data[(x_coord)+1] = v;
} // end reordering
} // end x_coord iteration } // end x_coord iteration
} // colour depth loop (8)
} // end row iteration } // end row iteration
} // colour depth loop (8)
} // updateMatrixDMABuffer (full frame paint) } // updateMatrixDMABuffer (full frame paint)
/** /**
@ -791,7 +647,7 @@ void MatrixPanel_I2S_DMA::shiftDriver(const shift_driver _drv, const int dma_r1_
#if SERIAL_DEBUG #if SERIAL_DEBUG
Serial.println( F("MatrixPanel_I2S_DMA - initializing FM6124 driver...")); Serial.println( F("MatrixPanel_I2S_DMA - initializing FM6124 driver..."));
#endif #endif
bool REG1[16] = {0,0,0,0,0, 1,1,1,1,1,1, 0,0,0,0,0}; // this sets global matrix brighness power bool REG1[16] = {0,0,0,0,0, 1,1,1,1,1,1, 0,0,0,0,0}; // this sets global matrix brightness power
bool REG2[16] = {0,0,0,0,0, 0,0,0,0,1,0, 0,0,0,0,0}; // a single bit enables the matrix output bool REG2[16] = {0,0,0,0,0, 0,0,0,0,1,0, 0,0,0,0,0}; // a single bit enables the matrix output
for (uint8_t _pin:{dma_r1_pin, dma_r2_pin, dma_g1_pin, dma_g2_pin, dma_b1_pin, dma_b2_pin, dma_clk_pin, dma_lat_pin, dma_oe_pin}) for (uint8_t _pin:{dma_r1_pin, dma_r2_pin, dma_g1_pin, dma_g2_pin, dma_b1_pin, dma_b2_pin, dma_clk_pin, dma_lat_pin, dma_oe_pin})
@ -807,7 +663,7 @@ void MatrixPanel_I2S_DMA::shiftDriver(const shift_driver _drv, const int dma_r1_
for (uint8_t _pin:{dma_r1_pin, dma_r2_pin, dma_g1_pin, dma_g2_pin, dma_b1_pin, dma_b2_pin}) for (uint8_t _pin:{dma_r1_pin, dma_r2_pin, dma_g1_pin, dma_g2_pin, dma_b1_pin, dma_b2_pin})
digitalWrite(_pin, REG1[l%16]); // we have 16 bits shifters and write the same value all over the matrix array digitalWrite(_pin, REG1[l%16]); // we have 16 bits shifters and write the same value all over the matrix array
if (l > MATRIX_WIDTH - 12){ // pull the latch 12 clocks before the end of matrix so that REG1 starts counting to save the value if (l > MATRIX_WIDTH - 12){ // pull the latch 11 clocks before the end of matrix so that REG1 starts counting to save the value
digitalWrite(dma_lat_pin, HIGH); digitalWrite(dma_lat_pin, HIGH);
} }
digitalWrite(dma_clk_pin, HIGH); // 1-clock pulse digitalWrite(dma_clk_pin, HIGH); // 1-clock pulse
@ -823,7 +679,7 @@ void MatrixPanel_I2S_DMA::shiftDriver(const shift_driver _drv, const int dma_r1_
for (uint8_t _pin:{dma_r1_pin, dma_r2_pin, dma_g1_pin, dma_g2_pin, dma_b1_pin, dma_b2_pin}) for (uint8_t _pin:{dma_r1_pin, dma_r2_pin, dma_g1_pin, dma_g2_pin, dma_b1_pin, dma_b2_pin})
digitalWrite(_pin, REG2[l%16]); // we have 16 bits shifters and we write the same value all over the matrix array digitalWrite(_pin, REG2[l%16]); // we have 16 bits shifters and we write the same value all over the matrix array
if (l > MATRIX_WIDTH - 13){ // pull the latch 13 clocks before the end of matrix so that reg2 stars counting to save the value if (l > MATRIX_WIDTH - 13){ // pull the latch 12 clocks before the end of matrix so that reg2 stars counting to save the value
digitalWrite(dma_lat_pin, HIGH); digitalWrite(dma_lat_pin, HIGH);
} }
digitalWrite(dma_clk_pin, HIGH); // 1-clock pulse digitalWrite(dma_clk_pin, HIGH); // 1-clock pulse
@ -840,3 +696,16 @@ void MatrixPanel_I2S_DMA::shiftDriver(const shift_driver _drv, const int dma_r1_
break; break;
} }
} }
/**
* clear screen to black and reset service bits
*/
void MatrixPanel_I2S_DMA::clearScreen(){
if (fastmode) {
fastmode = false; // we always clear screen in 'slow' mode to update all bits in DMA buffer
updateMatrixDMABuffer(0, 0, 0);
fastmode = true; // restore fastmode
} else {
updateMatrixDMABuffer(0, 0, 0);
}
}

55
ESP32-HUB75-MatrixPanel-I2S-DMA.h
View file

@ -104,6 +104,11 @@
#define BIT_D (1<<11) #define BIT_D (1<<11)
#define BIT_E (1<<12) #define BIT_E (1<<12)
#define BITSMASK_RGB1 (0xfff8) // inverted bitmask for R1G1B1 bit in pixel vector
#define BITSMASK_RGB2 (0xffc7) // inverted bitmask for R2G2B2 bit in pixel vector
#define BITSMASK_RGB12 (0xffc0) // inverted bitmask for R1G1B1R2G2B2 bit in pixel vector
#define BITSMASK_CTRL (0xe03f) // inverted bitmask for control bits ABCDE,LAT,OE in pixel vector
// RGB Panel Constants / Calculated Values // RGB Panel Constants / Calculated Values
#define COLOR_CHANNELS_PER_PIXEL 3 #define COLOR_CHANNELS_PER_PIXEL 3
#define PIXELS_PER_ROW ((MATRIX_WIDTH * MATRIX_HEIGHT) / MATRIX_HEIGHT) // = 64 #define PIXELS_PER_ROW ((MATRIX_WIDTH * MATRIX_HEIGHT) / MATRIX_HEIGHT) // = 64
@ -114,8 +119,10 @@
/* Keep this as is. Do not change. */ /* Keep this as is. Do not change. */
#define ESP32_I2S_DMA_MODE I2S_PARALLEL_BITS_16 // Pump 16 bits out in parallel #define ESP32_I2S_DMA_MODE I2S_PARALLEL_BITS_16 // Pump 16 bits out in parallel
#define ESP32_I2S_DMA_STORAGE_TYPE uint16_t // one uint16_t at a time. #define ESP32_I2S_DMA_STORAGE_TYPE uint16_t // one uint16_t at a time.
#ifndef ESP32_I2S_CLOCK_SPEED
#define ESP32_I2S_CLOCK_SPEED (10000000UL) // @ 10Mhz
//#define ESP32_I2S_CLOCK_SPEED (20000000UL) // @ 20Mhz //#define ESP32_I2S_CLOCK_SPEED (20000000UL) // @ 20Mhz
#define ESP32_I2S_CLOCK_SPEED (10000000UL) // @ 10Mhz #endif
#define CLKS_DURING_LATCH 0 // Not used. #define CLKS_DURING_LATCH 0 // Not used.
/***************************************************************************************/ /***************************************************************************************/
@ -250,7 +257,7 @@ class MatrixPanel_I2S_DMA : public Adafruit_GFX {
// Draw pixels // Draw pixels
virtual void drawPixel(int16_t x, int16_t y, uint16_t color); // overwrite adafruit implementation virtual void drawPixel(int16_t x, int16_t y, uint16_t color); // overwrite adafruit implementation
virtual void fillScreen(uint16_t color); // overwrite adafruit implementation virtual void fillScreen(uint16_t color); // overwrite adafruit implementation
void clearScreen() { fillScreen(0); } void clearScreen();
void fillScreenRGB888(uint8_t r, uint8_t g, uint8_t b); void fillScreenRGB888(uint8_t r, uint8_t g, uint8_t b);
void drawPixelRGB565(int16_t x, int16_t y, uint16_t color); void drawPixelRGB565(int16_t x, int16_t y, uint16_t color);
void drawPixelRGB888(int16_t x, int16_t y, uint8_t r, uint8_t g, uint8_t b); void drawPixelRGB888(int16_t x, int16_t y, uint8_t r, uint8_t g, uint8_t b);
@ -296,11 +303,22 @@ class MatrixPanel_I2S_DMA : public Adafruit_GFX {
while(!i2s_parallel_is_previous_buffer_free()) {} while(!i2s_parallel_is_previous_buffer_free()) {}
} }
inline void setPanelBrightness(int &b)
inline void setPanelBrightness(int b)
{ {
// Change to set the brightness of the display, range of 1 to matrixWidth (i.e. 1 - 64) // Change to set the brightness of the display, range of 1 to matrixWidth (i.e. 1 - 64)
brightness = b; brightness = b;
if (fastmode) // in 'fast' mode we should always reset DMA buffer to update OE bits that controls brightness
clearScreen(); // and YES, it WILL flicker. you've been warned :)
}
/**
* this is just a wrapper to control brightness
* with an 8-bit value (0-255), very popular in FastLED-based sketches :)
* @param uint8_t b - 8-bit brightness value
*/
void setBrightness8(const uint8_t b)
{
setPanelBrightness(b * MATRIX_WIDTH / 256);
} }
inline void setMinRefreshRate(int rr) inline void setMinRefreshRate(int rr)
@ -308,6 +326,23 @@ class MatrixPanel_I2S_DMA : public Adafruit_GFX {
min_refresh_rate = rr; min_refresh_rate = rr;
} }
/**
* Controls fast-update mode, when only RGB bits are upated in DMA buffer
* @param mode bool - set/clear fastmode. Will take effect on newly updated pixels only
* @return fastmode status
*/
bool setFastMode(const bool mode){
fastmode = mode;
return fastmode;
};
/**
* Controls fast-update mode, when only RGB bits are upated in DMA buffer
* @param void - returns current fastmode status
*/
bool setFastMode(){return fastmode;};
int calculated_refresh_rate = 0; int calculated_refresh_rate = 0;
// ------- PRIVATE ------- // ------- PRIVATE -------
@ -332,6 +367,18 @@ class MatrixPanel_I2S_DMA : public Adafruit_GFX {
int min_refresh_rate = 99; // Probably best to leave as is unless you want to experiment. Framerate has an impact on brightness and also power draw - voltage ripple. int min_refresh_rate = 99; // Probably best to leave as is unless you want to experiment. Framerate has an impact on brightness and also power draw - voltage ripple.
int lsbMsbTransitionBit = 0; // For possible color depth calculations int lsbMsbTransitionBit = 0; // For possible color depth calculations
/**
* this var controls how DMA buffers are updated
* if set to false (default) - full recalculation performed, including address line bits, OE, LAT
* if set to true, only RGB1, RGB2 bits are updated.
* Could be toggled any time, see Notes regarding #define GO_FOR_SPEED 1 above
*/
#ifdef GO_FOR_SPEED
bool fastmode = true;
#else
bool fastmode = false;
#endif
/* Calculate the memory available for DMA use, do some other stuff, and allocate accordingly */ /* Calculate the memory available for DMA use, do some other stuff, and allocate accordingly */
bool allocateDMAmemory(); bool allocateDMAmemory();