Merge pull request #237 from mrfaptastic/dev

Better CI checks

README.md

@@ -17,7 +17,7 @@ __[BUILD](/doc/BuildOptions.md) | [EXAMPLES](/examples/README.md)__ | [![Platfor
   * [2. Wiring ESP32 with the LED Matrix Panel](#2-wiring-esp32-with-the-led-matrix-panel)
   * [3. Run a Test Sketch](#3-run-a-test-sketch)
 - [More Information](#more-information)
-  * [Build-time options](#build-time-options)
+  * [Build-time options](#doc/BuildOptions.md)
   * [Memory constraints](#memory-constraints)
   * [Can I use with a larger panel (i.e. 64x64px square panel)?](#can-i-use-with-a-larger-panel-ie-64x64px-square-panel)
   * [Can I chain panels?](#can-i-chain-panels)

examples/PIO_TestPatterns/README.md

@@ -2,6 +2,8 @@
 
 Simple solid colors, gradients and test line patterns, could be used to test matrices for proper operation, flickering and estimate fillrate timings.
 
+It is also used in CI test builds to check different build flags scenarios.
+
 Should be build and uploaded as a [platformio](https://platformio.org/) project
 
 

examples/PIO_TestPatterns/platformio.ini

@@ -1,29 +1,76 @@
 [platformio]
-default_envs = esp32
+;default_envs = esp32
+description = HUB75 ESP32 I2S DMA test patterns example
+;src_dir = src
 
 [env]
 framework = arduino
 platform = espressif32
-board_build.filesystem = littlefs
 board = wemos_d1_mini32
 lib_deps =
-    FastLED
+    fastled/FastLED
+    https://github.com/mrfaptastic/ESP32-HUB75-MatrixPanel-I2S-DMA.git
 build_flags =
-;   -DSERIAL_DEBUG=1
+upload_speed = 460800
-upload_speed = 921600
 monitor_speed = 115200
 monitor_filters = esp32_exception_decoder
 
 [env:esp32]
 build_flags =
     ${env.build_flags}
-    ;-DUSE_FASTLINES
+    -DTEST_FASTLINES
-    -DNO_GFX
 lib_deps =
     ${env.lib_deps}
-;   use dev version of the lib
+    Wire
-    https://github.com/mrfaptastic/ESP32-HUB75-MatrixPanel-I2S-DMA.git
+    adafruit/Adafruit BusIO
+    adafruit/Adafruit GFX Library
 
+[env:debug]
+build_flags =
+    ${env.build_flags}
+    -DTEST_FASTLINES
+    -DSERIAL_DEBUG
+lib_deps =
+    ${env.lib_deps}
+    Wire
+    adafruit/Adafruit BusIO
+    adafruit/Adafruit GFX Library
+
+; build without GFX functions
+[env:minimal]
+build_flags =
+    ${env.build_flags}
+    -DNO_GFX
+    -DNO_FAST_FUNCTIONS
+    -DNO_CIE1931
+lib_deps =
+    ${env.lib_deps}
+
+; Virtual Panel test
+[env:vpane]
+build_flags =
+    ${env.build_flags}
+    -DNO_FAST_FUNCTIONS
+    -DVIRTUAL_PANE
+lib_deps =
+    ${env.lib_deps}
+    Wire
+    adafruit/Adafruit BusIO
+    adafruit/Adafruit GFX Library
+
+; Virtual Panel test
+[env:vpane_minimal]
+build_flags =
+    ${env.build_flags}
+    -DVIRTUAL_PANE
+    -DNO_GFX
+    -DNO_FAST_FUNCTIONS
+    -DNO_CIE1931
+lib_deps =
+    ${env.lib_deps}
+    Wire
+    adafruit/Adafruit BusIO
+    adafruit/Adafruit GFX Library
 
 ; PIO CI can't handle IDF git modules properly (yet)
 ;[env:idfarduino]

examples/PIO_TestPatterns/src/main.cpp

@@ -11,8 +11,11 @@
 */
 #include <Arduino.h>
 #include "xtensa/core-macros.h"
+#ifdef VIRTUAL_PANE
+#include <ESP32-VirtualMatrixPanel-I2S-DMA.h>
+#else
 #include <ESP32-HUB75-MatrixPanel-I2S-DMA.h>
-
+#endif
 #include "main.h"
 
 // HUB75E pinout
@@ -44,25 +47,38 @@
 */
 
 // Configure for your panel(s) as appropriate!
+#define PIN_E 32
 #define PANEL_WIDTH 64
 #define PANEL_HEIGHT 64         // Panel height of 64 will required PIN_E to be defined.
-#define PANELS_NUMBER 2         // Number of chained panels, if just a single panel, obviously set to 1
+
-#define PIN_E 32
+#ifdef VIRTUAL_PANE
+ #define PANELS_NUMBER 4         // Number of chained panels, if just a single panel, obviously set to 1
+#else
+ #define PANELS_NUMBER 2         // Number of chained panels, if just a single panel, obviously set to 1
+#endif
 
 #define PANE_WIDTH PANEL_WIDTH * PANELS_NUMBER
 #define PANE_HEIGHT PANEL_HEIGHT
-
-
-// patten change delay
-#define PATTERN_DELAY 2000
-
 #define NUM_LEDS PANE_WIDTH*PANE_HEIGHT
 
-// do tests using fast-line methods
+#ifdef VIRTUAL_PANE
-#define USE_FASTLINES
+ #define NUM_ROWS 2 // Number of rows of chained INDIVIDUAL PANELS
+ #define NUM_COLS 2 // Number of INDIVIDUAL PANELS per ROW
+ #define PANEL_CHAIN NUM_ROWS*NUM_COLS    // total number of panels chained one to another
+ // Change this to your needs, for details on VirtualPanel pls read the PDF!
+ #define SERPENT true
+ #define TOPDOWN false
+#endif
 
 
+#ifdef VIRTUAL_PANE
+VirtualMatrixPanel *matrix = nullptr;
+MatrixPanel_I2S_DMA *chain = nullptr;
+#else
 MatrixPanel_I2S_DMA *matrix = nullptr;
+#endif
+// patten change delay
+#define PATTERN_DELAY 2000
 
 uint16_t time_counter = 0, cycles = 0, fps = 0;
 unsigned long fps_timer;
@@ -77,6 +93,8 @@ uint32_t ccount1, ccount2;
 uint8_t color1 = 0, color2 = 0, color3 = 0;
 uint16_t x,y;
 
+const char *str = "* ESP32 I2S DMA *";
+
 void setup(){
 
   Serial.begin(BAUD_RATE);
@@ -89,23 +107,31 @@ void setup(){
   mxconfig.gpio.e = PIN_E;
   mxconfig.driver = HUB75_I2S_CFG::FM6126A;   // for panels using FM6126A chips
 
+#ifndef VIRTUAL_PANE
   matrix = new MatrixPanel_I2S_DMA(mxconfig);
-
   matrix->begin();
   matrix->setBrightness8(255);
-
+#else
-  // longer latch blanking could help to eliminate ghosting in some cases
+  chain = new MatrixPanel_I2S_DMA(mxconfig);
-  //matrix->setLatBlanking(2);
+  chain->begin();
+  chain->setBrightness8(255);
+  // create VirtualDisplay object based on our newly created dma_display object
+  matrix = new VirtualMatrixPanel((*chain), NUM_ROWS, NUM_COLS, PANEL_WIDTH, PANEL_HEIGHT, SERPENT, TOPDOWN);
+#endif
 
   ledbuff = (CRGB *)malloc(NUM_LEDS * sizeof(CRGB));  // allocate buffer for some tests
   buffclear(ledbuff);
 }
 
-
+uint8_t wheelval = 0;
 void loop(){
 
   Serial.printf("Cycle: %d\n", ++cycles);
 
+#ifndef NO_GFX
+  drawText(wheelval++);
+#endif
+
   Serial.print("Estimating clearScreen() - ");
   ccount1 = XTHAL_GET_CCOUNT();
   matrix->clearScreen();
@@ -126,7 +152,7 @@ void loop(){
   delay(5000);
 */
 
-
+#ifndef VIRTUAL_PANE
   // simple solid colors
   Serial.println("Fill screen: RED");
   matrix->fillScreenRGB888(255, 0, 0);
@@ -137,7 +163,7 @@ void loop(){
   Serial.println("Fill screen: BLUE");
   matrix->fillScreenRGB888(0, 0, 255);
   delay(PATTERN_DELAY);
-
+#endif
 
   for (uint8_t i=5; i; --i){
     Serial.print("Estimating single drawPixelRGB888(r, g, b) ticks: ");
@@ -157,6 +183,7 @@ void loop(){
   t2 = micros()-t1;
   Serial.printf("%lu us, %u ticks\n\n", t2, ccount1);
 
+#ifndef VIRTUAL_PANE
   // Bare fillscreen(r, g, b)
   Serial.print("Estimating fillscreenRGB888(r, g, b) time: ");
   t1 = micros();
@@ -167,7 +194,7 @@ void loop(){
   s1+=t2;
   Serial.printf("%lu us, avg: %lu, ccnt: %d\n", t2, s1/cycles, ccount2);
   delay(PATTERN_DELAY);
-
+#endif
 
   Serial.print("Estimating full-screen fillrate with looped drawPixelRGB888(): ");
   y = PANE_HEIGHT;
@@ -214,7 +241,7 @@ void loop(){
   delay(PATTERN_DELAY);
 //
 
-#ifdef USE_FASTLINES
+#ifdef TEST_FASTLINES
   // Fillrate for fillRect() function
   Serial.print("Estimating fullscreen fillrate with fillRect() time: ");
   t1 = micros();
@@ -266,7 +293,7 @@ void loop(){
   Serial.printf("%lu us, %u ticks\n", t2, ccount1);
   delay(PATTERN_DELAY);
 
-#ifdef USE_FASTLINES
+#ifdef TEST_FASTLINES
   Serial.println("Estimating V-lines with vlineDMA(): ");  //
   matrix->fillScreen(0);
   color2 = random8();
@@ -320,7 +347,7 @@ void loop(){
   Serial.printf("%lu us, %u ticks\n", t2, ccount1);
   delay(PATTERN_DELAY);
 
-#ifdef USE_FASTLINES
+#ifdef TEST_FASTLINES
   Serial.println("Estimating H-lines with hlineDMA(): ");
   matrix->fillScreen(0);
   color2 = random8();
@@ -396,3 +423,33 @@ uint16_t XY16( uint16_t x, uint16_t y)
     return 0;
   }
 }
+
+#ifdef NO_GFX
+void drawText(int colorWheelOffset){}
+#else
+void drawText(int colorWheelOffset){
+  // draw some text
+  matrix->setTextSize(1);     // size 1 == 8 pixels high
+  matrix->setTextWrap(false); // Don't wrap at end of line - will do ourselves
+
+  matrix->setCursor(5, 5);    // start at top left, with 5,5 pixel of spacing
+  uint8_t w = 0;
+
+  for (w=0; w<strlen(str); w++) {
+    matrix->setTextColor(colorWheel((w*32)+colorWheelOffset));
+    matrix->print(str[w]);
+  }
+}
+#endif
+
+uint16_t colorWheel(uint8_t pos) {
+  if(pos < 85) {
+    return matrix->color565(pos * 3, 255 - pos * 3, 0);
+  } else if(pos < 170) {
+    pos -= 85;
+    return matrix->color565(255 - pos * 3, 0, pos * 3);
+  } else {
+    pos -= 170;
+    return matrix->color565(0, pos * 3, 255 - pos * 3);
+  }
+}

examples/PIO_TestPatterns/src/main.h

@@ -6,3 +6,5 @@
 void buffclear(CRGB *buf);
 uint16_t XY16( uint16_t x, uint16_t y);
 void mxfill(CRGB *leds);
+uint16_t colorWheel(uint8_t pos);
+void drawText(int colorWheelOffset);