ScStw/ESP32-HUB75-MatrixPanel-DMA
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Update README.md

Browse source
This commit is contained in:
mrfaptastic 2020-08-03 14:09:55 +01:00 committed by GitHub
parent 043c7c156e
commit 54d6e485b9
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
1 changed files with 0 additions and 7 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

7
README.md
View file

@ -68,13 +68,6 @@ Yes you can. If you want to use with a 64x64 pixel panel (typically a HUB75*E* p
This library has only been tested with a 64 pixel (wide) and 32 (high) RGB panel. Theoretically, if you want to chain two of these horizontally to make a 128x32 panel you can do so with the cable and then set the MATRIX_WIDTH to '128'. Refer to the [Chained Panels](examples/ChainedPanels/) example. This library has only been tested with a 64 pixel (wide) and 32 (high) RGB panel. Theoretically, if you want to chain two of these horizontally to make a 128x32 panel you can do so with the cable and then set the MATRIX_WIDTH to '128'. Refer to the [Chained Panels](examples/ChainedPanels/) example.
### New Feature
With version 1.1.0 of the library onwards, there is now a 'feature' to split the framebuffer over two memory 'blocks' (mallocs) to work around the fact that typically the ESP32 upon 'boot up' has 2 x ~100kb chunks of memory available to use (ideally we'd want one massive chunk, but for whatever reasons this isn't the case). This allows non-contiguous memory allocations to be joined-up potentially allowing for 512x64 resolution or greater (no guarantees however). This is enabled by default.
[Refer to this](SPLIT_MEMORY_MODE.md) for more details.
## Ghosting ## Ghosting
If you experience ghosting, you will need to reduce the brightness level, not all RGB Matrix Panels are the same - some seem to display ghosting artefacts at lower brightness levels. In the setup() function do something like: If you experience ghosting, you will need to reduce the brightness level, not all RGB Matrix Panels are the same - some seem to display ghosting artefacts at lower brightness levels. In the setup() function do something like: