From 5caea964241ed7c4cfe93e94f2eacf04a2639a62 Mon Sep 17 00:00:00 2001
From: mrfaptastic <12006953+mrfaptastic@users.noreply.github.com>
Date: Mon, 3 Aug 2020 14:11:50 +0100
Subject: [PATCH] Update README.md

---
 README.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/README.md b/README.md
index 0981624..50462ea 100644
--- a/README.md
+++ b/README.md
@@ -66,7 +66,7 @@ A [typical RGB panel available for purchase](https://www.aliexpress.com/item/256
 
 Yes you can. If you want to use with a 64x64 pixel panel (typically a HUB75*E* panel) you MUST configure a valid *E_PIN* to your ESP32 and connect it to the E pin of the HUB75 panel! Hence the 'E' in 'HUB75E'
 
-This library has only been tested with a 64 pixel (wide) and 32 (high) RGB panel.  Theoretically, if you want to chain two of these horizontally to make a 128x32 panel you can do so with the cable and then set the MATRIX_WIDTH to '128'. Refer to the [Chained Panels](examples/ChainedPanels/) example.
+This library has only been tested with a 64 pixel (wide) and 32 (high) RGB panel.  Theoretically, if you want to chain /n/ of these horizontally to make a (n*64)x32 panel you can do so with the cable and then set the MATRIX_WIDTH to '64*/n/'. Refer to the [Chained Panels](examples/ChainedPanels/) example.
 
 ## Ghosting