ScStw/ESP32-HUB75-MatrixPanel-DMA
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

New Year Updates

Browse source 
Move ISR I2S device check to a compile time option.
This commit is contained in:
mrfaptastic 2022-01-03 18:43:52 +00:00
parent 41e5901805
commit 62deac6c48
6 changed files with 196 additions and 519 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

300
ESP32-HUB75-MatrixPanel-I2S-DMA.cpp
View file

@ -3,18 +3,18 @@
#if defined(ESP32_SXXX) #if defined(ESP32_SXXX)
#pragma message "Compiling for ESP32-Sx MCUs" #pragma message "Compiling for ESP32-Sx MCUs"
#elif defined(ESP32_CXXX) #elif defined(ESP32_CXXX)
#pragma message "Compiling for ESP32-Cx MCUs" #pragma message "Compiling for ESP32-Cx MCUs"
#elif CONFIG_IDF_TARGET_ESP32 || defined(ESP32) #elif CONFIG_IDF_TARGET_ESP32 || defined(ESP32)
#pragma message "Compiling for original 520kB SRAM ESP32." #pragma message "Compiling for original (released 2016) 520kB SRAM ESP32."
#else #else
#error "Compiling for something unknown!" #error "Compiling for something unknown!"
#endif #endif
// Credits: Louis Beaudoin <https://github.com/pixelmatix/SmartMatrix/tree/teensylc> // Credits: Louis Beaudoin <https://github.com/pixelmatix/SmartMatrix/tree/teensylc>
// and Sprite_TM: https://www.esp32.com/viewtopic.php?f=17&t=3188 and https://www.esp32.com/viewtopic.php?f=13&t=3256 // and Sprite_TM: https://www.esp32.com/viewtopic.php?f=17&t=3188 and https://www.esp32.com/viewtopic.php?f=13&t=3256
/* /*
@ -89,7 +89,7 @@ bool MatrixPanel_I2S_DMA::allocateDMAmemory()
size_t _dma_linked_list_memory_required = 0; size_t _dma_linked_list_memory_required = 0;
size_t _total_dma_capable_memory_reserved = 0; size_t _total_dma_capable_memory_reserved = 0;
// 1. Calculate the amount of DMA capable memory that's actually available // 1. Calculate the amount of DMA capable memory that's actually available
#if SERIAL_DEBUG #if SERIAL_DEBUG
Serial.printf_P(PSTR("Panel Width: %d pixels.\r\n"), PIXELS_PER_ROW); Serial.printf_P(PSTR("Panel Width: %d pixels.\r\n"), PIXELS_PER_ROW);
Serial.printf_P(PSTR("Panel Height: %d pixels.\r\n"), m_cfg.mx_height); Serial.printf_P(PSTR("Panel Height: %d pixels.\r\n"), m_cfg.mx_height);
@ -100,11 +100,11 @@ bool MatrixPanel_I2S_DMA::allocateDMAmemory()
Serial.println(F("DMA memory blocks available before any malloc's: ")); Serial.println(F("DMA memory blocks available before any malloc's: "));
heap_caps_print_heap_info(MALLOC_CAP_DMA); heap_caps_print_heap_info(MALLOC_CAP_DMA);
Serial.println(F("******************************************************************")); Serial.println(F("******************************************************************"));
Serial.printf_P(PSTR("We're going to need %d bytes of SRAM just for the frame buffer(s).\r\n"), _frame_buffer_memory_required); Serial.printf_P(PSTR("We're going to need %d bytes of SRAM just for the frame buffer(s).\r\n"), _frame_buffer_memory_required);
Serial.printf_P(PSTR("The total amount of DMA capable SRAM memory is %d bytes.\r\n"), heap_caps_get_free_size(MALLOC_CAP_DMA)); Serial.printf_P(PSTR("The total amount of DMA capable SRAM memory is %d bytes.\r\n"), heap_caps_get_free_size(MALLOC_CAP_DMA));
Serial.printf_P(PSTR("Largest DMA capable SRAM memory block is %d bytes.\r\n"), heap_caps_get_largest_free_block(MALLOC_CAP_DMA)); Serial.printf_P(PSTR("Largest DMA capable SRAM memory block is %d bytes.\r\n"), heap_caps_get_largest_free_block(MALLOC_CAP_DMA));
Serial.println(F("******************************************************************")); Serial.println(F("******************************************************************"));
#endif #endif
@ -118,20 +118,20 @@ bool MatrixPanel_I2S_DMA::allocateDMAmemory()
return false; return false;
} }
// Alright, theoretically we should be OK, so let us do this, so // Alright, theoretically we should be OK, so let us do this, so
// lets allocate a chunk of memory for each row (a row could span multiple panels if chaining is in place) // lets allocate a chunk of memory for each row (a row could span multiple panels if chaining is in place)
dma_buff.rowBits.reserve(ROWS_PER_FRAME); dma_buff.rowBits.reserve(ROWS_PER_FRAME);
// iterate through number of rows // iterate through number of rows
for (int malloc_num =0; malloc_num < ROWS_PER_FRAME; ++malloc_num) for (int malloc_num =0; malloc_num < ROWS_PER_FRAME; ++malloc_num)
{ {
auto ptr = std::make_shared<rowBitStruct>(PIXELS_PER_ROW, PIXEL_COLOR_DEPTH_BITS, m_cfg.double_buff); auto ptr = std::make_shared<rowBitStruct>(PIXELS_PER_ROW, PIXEL_COLOR_DEPTH_BITS, m_cfg.double_buff);
if (ptr->data == nullptr){ if (ptr->data == nullptr){
#if SERIAL_DEBUG #if SERIAL_DEBUG
Serial.printf_P(PSTR("ERROR: Couldn't malloc rowBitStruct %d! Critical fail.\r\n"), malloc_num); Serial.printf_P(PSTR("ERROR: Couldn't malloc rowBitStruct %d! Critical fail.\r\n"), malloc_num);
#endif #endif
return false; return false;
// TODO: should we release all previous rowBitStructs here??? // TODO: should we release all previous rowBitStructs here???
} }
@ -141,7 +141,7 @@ bool MatrixPanel_I2S_DMA::allocateDMAmemory()
Serial.printf_P(PSTR("Malloc'ing %d bytes of memory @ address %ud for frame row %d.\r\n"), ptr->size()*_num_frame_buffers, (unsigned int)ptr->getDataPtr(), malloc_num); Serial.printf_P(PSTR("Malloc'ing %d bytes of memory @ address %ud for frame row %d.\r\n"), ptr->size()*_num_frame_buffers, (unsigned int)ptr->getDataPtr(), malloc_num);
#endif #endif
} }
_total_dma_capable_memory_reserved += _frame_buffer_memory_required; _total_dma_capable_memory_reserved += _frame_buffer_memory_required;
@ -203,7 +203,7 @@ bool MatrixPanel_I2S_DMA::allocateDMAmemory()
#if SERIAL_DEBUG #if SERIAL_DEBUG
Serial.printf_P(PSTR("lsbMsbTransitionBit of %d gives %d Hz refresh: \r\n"), lsbMsbTransitionBit, actualRefreshRate); Serial.printf_P(PSTR("lsbMsbTransitionBit of %d gives %d Hz refresh: \r\n"), lsbMsbTransitionBit, actualRefreshRate);
#endif #endif
if (actualRefreshRate > m_cfg.min_refresh_rate) if (actualRefreshRate > m_cfg.min_refresh_rate)
break; break;
@ -218,7 +218,7 @@ bool MatrixPanel_I2S_DMA::allocateDMAmemory()
Serial.printf_P(PSTR("Raised lsbMsbTransitionBit to %d/%d to meet minimum refresh rate\r\n"), lsbMsbTransitionBit, PIXEL_COLOR_DEPTH_BITS - 1); Serial.printf_P(PSTR("Raised lsbMsbTransitionBit to %d/%d to meet minimum refresh rate\r\n"), lsbMsbTransitionBit, PIXEL_COLOR_DEPTH_BITS - 1);
#endif #endif
#endif #endif
/*** /***
* Step 2a: lsbMsbTransition bit is now finalised - recalculate the DMA descriptor count required, which is used for * Step 2a: lsbMsbTransition bit is now finalised - recalculate the DMA descriptor count required, which is used for
@ -238,7 +238,7 @@ bool MatrixPanel_I2S_DMA::allocateDMAmemory()
#if SERIAL_DEBUG #if SERIAL_DEBUG
Serial.printf_P(PSTR("rowColorDepthStruct struct is too large, split DMA payload required. Adding %d DMA descriptors\n"), PIXEL_COLOR_DEPTH_BITS-1); Serial.printf_P(PSTR("rowColorDepthStruct struct is too large, split DMA payload required. Adding %d DMA descriptors\n"), PIXEL_COLOR_DEPTH_BITS-1);
#endif #endif
numDMAdescriptorsPerRow += PIXEL_COLOR_DEPTH_BITS-1; numDMAdescriptorsPerRow += PIXEL_COLOR_DEPTH_BITS-1;
// Note: If numDMAdescriptorsPerRow is even just one descriptor too large, DMA linked list will not correctly loop. // Note: If numDMAdescriptorsPerRow is even just one descriptor too large, DMA linked list will not correctly loop.
@ -251,8 +251,8 @@ bool MatrixPanel_I2S_DMA::allocateDMAmemory()
_dma_linked_list_memory_required = numDMAdescriptorsPerRow * ROWS_PER_FRAME * _num_frame_buffers * sizeof(lldesc_t); _dma_linked_list_memory_required = numDMAdescriptorsPerRow * ROWS_PER_FRAME * _num_frame_buffers * sizeof(lldesc_t);
#if SERIAL_DEBUG #if SERIAL_DEBUG
Serial.printf_P(PSTR("Descriptors for lsbMsbTransitionBit of %d/%d with %d frame rows require %d bytes of DMA RAM with %d numDMAdescriptorsPerRow.\r\n"), lsbMsbTransitionBit, PIXEL_COLOR_DEPTH_BITS - 1, ROWS_PER_FRAME, _dma_linked_list_memory_required, numDMAdescriptorsPerRow); Serial.printf_P(PSTR("Descriptors for lsbMsbTransitionBit of %d/%d with %d frame rows require %d bytes of DMA RAM with %d numDMAdescriptorsPerRow.\r\n"), lsbMsbTransitionBit, PIXEL_COLOR_DEPTH_BITS - 1, ROWS_PER_FRAME, _dma_linked_list_memory_required, numDMAdescriptorsPerRow);
#endif #endif
_total_dma_capable_memory_reserved += _dma_linked_list_memory_required; _total_dma_capable_memory_reserved += _dma_linked_list_memory_required;
@ -300,7 +300,7 @@ bool MatrixPanel_I2S_DMA::allocateDMAmemory()
#endif #endif
// Just os we know // Just os we know
initialized = true; initialized = true;
return true; return true;
@ -398,10 +398,10 @@ void MatrixPanel_I2S_DMA::configureDMA(const HUB75_I2S_CFG& _cfg)
#if SERIAL_DEBUG #if SERIAL_DEBUG
Serial.printf_P(PSTR("configureDMA(): Configured LL structure. %d DMA Linked List descriptors populated.\r\n"), current_dmadescriptor_offset); Serial.printf_P(PSTR("configureDMA(): Configured LL structure. %d DMA Linked List descriptors populated.\r\n"), current_dmadescriptor_offset);
if ( desccount != current_dmadescriptor_offset) if ( desccount != current_dmadescriptor_offset)
{ {
Serial.printf_P(PSTR("configureDMA(): ERROR! Expected descriptor count of %d != actual DMA descriptors of %d!\r\n"), desccount, current_dmadescriptor_offset); Serial.printf_P(PSTR("configureDMA(): ERROR! Expected descriptor count of %d != actual DMA descriptors of %d!\r\n"), desccount, current_dmadescriptor_offset);
} }
#endif #endif
//End markers for DMA LL //End markers for DMA LL
@ -429,7 +429,7 @@ void MatrixPanel_I2S_DMA::configureDMA(const HUB75_I2S_CFG& _cfg)
.desccount_b=desccount, .desccount_b=desccount,
.lldesc_b=dmadesc_b, .lldesc_b=dmadesc_b,
.clkphase=_cfg.clkphase, .clkphase=_cfg.clkphase,
.int_ena_out_eof=_cfg.double_buff .int_ena_out_eof=_cfg.double_buff
}; };
// Setup I2S // Setup I2S
@ -444,7 +444,7 @@ void MatrixPanel_I2S_DMA::configureDMA(const HUB75_I2S_CFG& _cfg)
/* There are 'bits' set in the frameStruct that we simply don't need to set every single time we change a pixel / DMA buffer co-ordinate. /* There are 'bits' set in the frameStruct that we simply don't need to set every single time we change a pixel / DMA buffer co-ordinate.
* For example, the bits that determine the address lines, we don't need to set these every time. Once they're in place, and assuming we * For example, the bits that determine the address lines, we don't need to set these every time. Once they're in place, and assuming we
* don't accidentally clear them, then we don't need to set them again. * don't accidentally clear them, then we don't need to set them again.
* So to save processing, we strip this logic out to the absolute bare minimum, which is toggling only the R,G,B pixels (bits) per co-ord. * So to save processing, we strip this logic out to the absolute bare minimum, which is toggling only the R,G,B pixels (bits) per co-ord.
* *
@ -477,32 +477,32 @@ void IRAM_ATTR MatrixPanel_I2S_DMA::updateMatrixDMABuffer(int16_t x_coord, int16
} }
/* LED Brightness Compensation. Because if we do a basic "red & mask" for example, /* LED Brightness Compensation. Because if we do a basic "red & mask" for example,
* we'll NEVER send the dimmest possible colour, due to binary skew. * we'll NEVER send the dimmest possible colour, due to binary skew.
* i.e. It's almost impossible for color_depth_idx of 0 to be sent out to the MATRIX unless the 'value' of a color is exactly '1' * i.e. It's almost impossible for color_depth_idx of 0 to be sent out to the MATRIX unless the 'value' of a color is exactly '1'
* https://ledshield.wordpress.com/2012/11/13/led-brightness-to-your-eye-gamma-correction-no/ * https://ledshield.wordpress.com/2012/11/13/led-brightness-to-your-eye-gamma-correction-no/
*/ */
#ifndef NO_CIE1931 #ifndef NO_CIE1931
red = lumConvTab[red]; red = lumConvTab[red];
green = lumConvTab[green]; green = lumConvTab[green];
blue = lumConvTab[blue]; blue = lumConvTab[blue];
#endif #endif
/* When using the drawPixel, we are obviously only changing the value of one x,y position, /* When using the drawPixel, we are obviously only changing the value of one x,y position,
* however, the two-scan panels paint TWO lines at the same time * however, the two-scan panels paint TWO lines at the same time
* and this reflects the parallel in-DMA-memory data structure of uint16_t's that are getting * and this reflects the parallel in-DMA-memory data structure of uint16_t's that are getting
* pumped out at high speed. * pumped out at high speed.
* *
* So we need to ensure we persist the bits (8 of them) of the uint16_t for the row we aren't changing. * So we need to ensure we persist the bits (8 of them) of the uint16_t for the row we aren't changing.
* *
* The DMA buffer order has also been reversed (refer to the last code in this function) * The DMA buffer order has also been reversed (refer to the last code in this function)
* so we have to check for this and check the correct position of the MATRIX_DATA_STORAGE_TYPE * so we have to check for this and check the correct position of the MATRIX_DATA_STORAGE_TYPE
* data. * data.
*/ */
#ifndef ESP32_SXXX #ifndef ESP32_SXXX
// We need to update the correct uint16_t in the rowBitStruct array, that gets sent out in parallel // We need to update the correct uint16_t in the rowBitStruct array, that gets sent out in parallel
// 16 bit parallel mode - Save the calculated value to the bitplane memory in reverse order to account for I2S Tx FIFO mode1 ordering // 16 bit parallel mode - Save the calculated value to the bitplane memory in reverse order to account for I2S Tx FIFO mode1 ordering
// Irrelevant for ESP32-S2 the way the FIFO ordering works is different - refer to page 679 of S2 technical reference manual // Irrelevant for ESP32-S2 the way the FIFO ordering works is different - refer to page 679 of S2 technical reference manual
x_coord & 1U ? --x_coord : ++x_coord; x_coord & 1U ? --x_coord : ++x_coord;
#endif #endif
@ -520,15 +520,15 @@ void IRAM_ATTR MatrixPanel_I2S_DMA::updateMatrixDMABuffer(int16_t x_coord, int16
do { do {
--color_depth_idx; --color_depth_idx;
// uint8_t mask = (1 << (color_depth_idx COLOR_DEPTH_LESS_THAN_8BIT_ADJUST)); // expect 24 bit color (8 bits per RGB subpixel) // uint8_t mask = (1 << (color_depth_idx COLOR_DEPTH_LESS_THAN_8BIT_ADJUST)); // expect 24 bit color (8 bits per RGB subpixel)
#if PIXEL_COLOR_DEPTH_BITS < 8 #if PIXEL_COLOR_DEPTH_BITS < 8
uint8_t mask = (1 << (color_depth_idx+MASK_OFFSET)); // expect 24 bit color (8 bits per RGB subpixel) uint8_t mask = (1 << (color_depth_idx+MASK_OFFSET)); // expect 24 bit color (8 bits per RGB subpixel)
#else #else
uint8_t mask = (1 << (color_depth_idx)); // expect 24 bit color (8 bits per RGB subpixel) uint8_t mask = (1 << (color_depth_idx)); // expect 24 bit color (8 bits per RGB subpixel)
#endif #endif
uint16_t RGB_output_bits = 0; uint16_t RGB_output_bits = 0;
/* Per the .h file, the order of the output RGB bits is: /* Per the .h file, the order of the output RGB bits is:
* BIT_B2, BIT_G2, BIT_R2, BIT_B1, BIT_G1, BIT_R1 */ * BIT_B2, BIT_G2, BIT_R2, BIT_B1, BIT_G1, BIT_R1 */
RGB_output_bits |= (bool)(blue & mask); // --B RGB_output_bits |= (bool)(blue & mask); // --B
RGB_output_bits <<= 1; RGB_output_bits <<= 1;
RGB_output_bits |= (bool)(green & mask); // -BG RGB_output_bits |= (bool)(green & mask); // -BG
@ -555,11 +555,11 @@ void MatrixPanel_I2S_DMA::updateMatrixDMABuffer(uint8_t red, uint8_t green, uint
{ {
if ( !initialized ) return; if ( !initialized ) return;
/* https://ledshield.wordpress.com/2012/11/13/led-brightness-to-your-eye-gamma-correction-no/ */ /* https://ledshield.wordpress.com/2012/11/13/led-brightness-to-your-eye-gamma-correction-no/ */
#ifndef NO_CIE1931 #ifndef NO_CIE1931
red = lumConvTab[red]; red = lumConvTab[red];
green = lumConvTab[green]; green = lumConvTab[green];
blue = lumConvTab[blue]; blue = lumConvTab[blue];
#endif #endif
for(uint8_t color_depth_idx=0; color_depth_idx<PIXEL_COLOR_DEPTH_BITS; color_depth_idx++) // color depth - 8 iterations for(uint8_t color_depth_idx=0; color_depth_idx<PIXEL_COLOR_DEPTH_BITS; color_depth_idx++) // color depth - 8 iterations
@ -567,21 +567,21 @@ void MatrixPanel_I2S_DMA::updateMatrixDMABuffer(uint8_t red, uint8_t green, uint
// let's precalculate RGB1 and RGB2 bits than flood it over the entire DMA buffer // let's precalculate RGB1 and RGB2 bits than flood it over the entire DMA buffer
uint16_t RGB_output_bits = 0; uint16_t RGB_output_bits = 0;
// uint8_t mask = (1 << color_depth_idx COLOR_DEPTH_LESS_THAN_8BIT_ADJUST); // 24 bit color // uint8_t mask = (1 << color_depth_idx COLOR_DEPTH_LESS_THAN_8BIT_ADJUST); // 24 bit color
#if PIXEL_COLOR_DEPTH_BITS < 8 #if PIXEL_COLOR_DEPTH_BITS < 8
uint8_t mask = (1 << (color_depth_idx+MASK_OFFSET)); // expect 24 bit color (8 bits per RGB subpixel) uint8_t mask = (1 << (color_depth_idx+MASK_OFFSET)); // expect 24 bit color (8 bits per RGB subpixel)
#else #else
uint8_t mask = (1 << (color_depth_idx)); // expect 24 bit color (8 bits per RGB subpixel) uint8_t mask = (1 << (color_depth_idx)); // expect 24 bit color (8 bits per RGB subpixel)
#endif #endif
/* Per the .h file, the order of the output RGB bits is: /* Per the .h file, the order of the output RGB bits is:
* BIT_B2, BIT_G2, BIT_R2, BIT_B1, BIT_G1, BIT_R1 */ * BIT_B2, BIT_G2, BIT_R2, BIT_B1, BIT_G1, BIT_R1 */
RGB_output_bits |= (bool)(blue & mask); // --B RGB_output_bits |= (bool)(blue & mask); // --B
RGB_output_bits <<= 1; RGB_output_bits <<= 1;
RGB_output_bits |= (bool)(green & mask); // -BG RGB_output_bits |= (bool)(green & mask); // -BG
RGB_output_bits <<= 1; RGB_output_bits <<= 1;
RGB_output_bits |= (bool)(red & mask); // BGR RGB_output_bits |= (bool)(red & mask); // BGR
// Duplicate and shift across so we have have 6 populated bits of RGB1 and RGB2 pin values suitable for DMA buffer // Duplicate and shift across so we have have 6 populated bits of RGB1 and RGB2 pin values suitable for DMA buffer
RGB_output_bits |= RGB_output_bits << BITS_RGB2_OFFSET; //BGRBGR RGB_output_bits |= RGB_output_bits << BITS_RGB2_OFFSET; //BGRBGR
//Serial.printf("Fill with: 0x%#06x\n", RGB_output_bits); //Serial.printf("Fill with: 0x%#06x\n", RGB_output_bits);
@ -636,13 +636,13 @@ void MatrixPanel_I2S_DMA::clearFrameBuffer(bool _buff_id){
do { do {
--x_pixel; --x_pixel;
if ( m_cfg.driver == HUB75_I2S_CFG::SM5266P) { if ( m_cfg.driver == HUB75_I2S_CFG::SM5266P) {
// modifications here for row shift register type SM5266P // modifications here for row shift register type SM5266P
// https://github.com/mrfaptastic/ESP32-HUB75-MatrixPanel-I2S-DMA/issues/164 // https://github.com/mrfaptastic/ESP32-HUB75-MatrixPanel-I2S-DMA/issues/164
row[x_pixel] = abcde & (0x18 << BITS_ADDR_OFFSET); // mask out the bottom 3 bits which are the clk di bk inputs row[x_pixel] = abcde & (0x18 << BITS_ADDR_OFFSET); // mask out the bottom 3 bits which are the clk di bk inputs
} else { } else {
row[x_pixel] = abcde; row[x_pixel] = abcde;
} }
} while(x_pixel!=dma_buff.rowBits[row_idx]->width); } while(x_pixel!=dma_buff.rowBits[row_idx]->width);
@ -652,51 +652,51 @@ void MatrixPanel_I2S_DMA::clearFrameBuffer(bool _buff_id){
do { do {
--x_pixel; --x_pixel;
if ( m_cfg.driver == HUB75_I2S_CFG::SM5266P) { if ( m_cfg.driver == HUB75_I2S_CFG::SM5266P) {
// modifications here for row shift register type SM5266P // modifications here for row shift register type SM5266P
// https://github.com/mrfaptastic/ESP32-HUB75-MatrixPanel-I2S-DMA/issues/164 // https://github.com/mrfaptastic/ESP32-HUB75-MatrixPanel-I2S-DMA/issues/164
row[x_pixel] = abcde & (0x18 << BITS_ADDR_OFFSET); // mask out the bottom 3 bits which are the clk di bk inputs row[x_pixel] = abcde & (0x18 << BITS_ADDR_OFFSET); // mask out the bottom 3 bits which are the clk di bk inputs
} else { } else {
row[x_pixel] = abcde; row[x_pixel] = abcde;
} }
//row[x_pixel] = abcde; //row[x_pixel] = abcde;
} while(x_pixel); } while(x_pixel);
// modifications here for row shift register type SM5266P // modifications here for row shift register type SM5266P
// https://github.com/mrfaptastic/ESP32-HUB75-MatrixPanel-I2S-DMA/issues/164 // https://github.com/mrfaptastic/ESP32-HUB75-MatrixPanel-I2S-DMA/issues/164
if ( m_cfg.driver == HUB75_I2S_CFG::SM5266P) { if ( m_cfg.driver == HUB75_I2S_CFG::SM5266P) {
uint16_t serialCount; uint16_t serialCount;
uint16_t latch; uint16_t latch;
x_pixel = dma_buff.rowBits[row_idx]->width - 16; // come back 8*2 pixels to allow for 8 writes x_pixel = dma_buff.rowBits[row_idx]->width - 16; // come back 8*2 pixels to allow for 8 writes
serialCount = 8; serialCount = 8;
do{ do{
serialCount--; serialCount--;
latch = row[x_pixel] | (((((ESP32_I2S_DMA_STORAGE_TYPE)row_idx) % 8) == serialCount) << 1) << BITS_ADDR_OFFSET; // data on 'B' latch = row[x_pixel] | (((((ESP32_I2S_DMA_STORAGE_TYPE)row_idx) % 8) == serialCount) << 1) << BITS_ADDR_OFFSET; // data on 'B'
row[x_pixel++] = latch| (0x05<< BITS_ADDR_OFFSET); // clock high on 'A'and BK high for update row[x_pixel++] = latch| (0x05<< BITS_ADDR_OFFSET); // clock high on 'A'and BK high for update
row[x_pixel++] = latch| (0x04<< BITS_ADDR_OFFSET); // clock low on 'A'and BK high for update row[x_pixel++] = latch| (0x04<< BITS_ADDR_OFFSET); // clock low on 'A'and BK high for update
} while (serialCount); } while (serialCount);
} // end SM5266P } // end SM5266P
// let's set LAT/OE control bits for specific pixels in each color_index subrows // let's set LAT/OE control bits for specific pixels in each color_index subrows
// Need to consider the original ESP32's (WROOM) DMA TX FIFO reordering of bytes... // Need to consider the original ESP32's (WROOM) DMA TX FIFO reordering of bytes...
uint8_t coloridx = dma_buff.rowBits[row_idx]->color_depth; uint8_t coloridx = dma_buff.rowBits[row_idx]->color_depth;
do { do {
--coloridx; --coloridx;
// switch pointer to a row for a specific color index // switch pointer to a row for a specific color index
row = dma_buff.rowBits[row_idx]->getDataPtr(coloridx, _buff_id); row = dma_buff.rowBits[row_idx]->getDataPtr(coloridx, _buff_id);
#ifdef ESP32_SXXX #ifdef ESP32_SXXX
// -1 works better on ESP32-S2 ? Because bytes get sent out in order... // -1 works better on ESP32-S2 ? Because bytes get sent out in order...
row[dma_buff.rowBits[row_idx]->width - 1] |= BIT_LAT; // -1 pixel to compensate array index starting at 0 row[dma_buff.rowBits[row_idx]->width - 1] |= BIT_LAT; // -1 pixel to compensate array index starting at 0
#else #else
// We need to update the correct uint16_t in the rowBitStruct array, that gets sent out in parallel // We need to update the correct uint16_t in the rowBitStruct array, that gets sent out in parallel
// 16 bit parallel mode - Save the calculated value to the bitplane memory in reverse order to account for I2S Tx FIFO mode1 ordering // 16 bit parallel mode - Save the calculated value to the bitplane memory in reverse order to account for I2S Tx FIFO mode1 ordering
// Irrelevant for ESP32-S2 the way the FIFO ordering works is different - refer to page 679 of S2 technical reference manual // Irrelevant for ESP32-S2 the way the FIFO ordering works is different - refer to page 679 of S2 technical reference manual
row[dma_buff.rowBits[row_idx]->width - 2] |= BIT_LAT; // -2 in the DMA array is actually -1 when it's reordered by TX FIFO row[dma_buff.rowBits[row_idx]->width - 2] |= BIT_LAT; // -2 in the DMA array is actually -1 when it's reordered by TX FIFO
#endif #endif
// need to disable OE before/after latch to hide row transition // need to disable OE before/after latch to hide row transition
// Should be one clock or more before latch, otherwise can get ghosting // Should be one clock or more before latch, otherwise can get ghosting
@ -704,21 +704,21 @@ void MatrixPanel_I2S_DMA::clearFrameBuffer(bool _buff_id){
do { do {
--_blank; --_blank;
#ifdef ESP32_SXXX #ifdef ESP32_SXXX
row[0 + _blank] |= BIT_OE; row[0 + _blank] |= BIT_OE;
row[dma_buff.rowBits[row_idx]->width - _blank - 1 ] |= BIT_OE; // (LAT pulse is (width-2) -1 pixel to compensate array index starting at 0 row[dma_buff.rowBits[row_idx]->width - _blank - 1 ] |= BIT_OE; // (LAT pulse is (width-2) -1 pixel to compensate array index starting at 0
#else #else
// Original ESP32 WROOM FIFO Ordering Sucks // Original ESP32 WROOM FIFO Ordering Sucks
uint8_t _blank_row_tx_fifo_tmp = 0 + _blank; uint8_t _blank_row_tx_fifo_tmp = 0 + _blank;
(_blank_row_tx_fifo_tmp & 1U) ? --_blank_row_tx_fifo_tmp : ++_blank_row_tx_fifo_tmp; (_blank_row_tx_fifo_tmp & 1U) ? --_blank_row_tx_fifo_tmp : ++_blank_row_tx_fifo_tmp;
row[_blank_row_tx_fifo_tmp] |= BIT_OE; row[_blank_row_tx_fifo_tmp] |= BIT_OE;
_blank_row_tx_fifo_tmp = dma_buff.rowBits[row_idx]->width - _blank - 1; // (LAT pulse is (width-2) -1 pixel to compensate array index starting at 0 _blank_row_tx_fifo_tmp = dma_buff.rowBits[row_idx]->width - _blank - 1; // (LAT pulse is (width-2) -1 pixel to compensate array index starting at 0
(_blank_row_tx_fifo_tmp & 1U) ? --_blank_row_tx_fifo_tmp : ++_blank_row_tx_fifo_tmp; (_blank_row_tx_fifo_tmp & 1U) ? --_blank_row_tx_fifo_tmp : ++_blank_row_tx_fifo_tmp;
row[_blank_row_tx_fifo_tmp] |= BIT_OE; row[_blank_row_tx_fifo_tmp] |= BIT_OE;
#endif #endif
} while (_blank); } while (_blank);
@ -759,23 +759,25 @@ void MatrixPanel_I2S_DMA::brtCtrlOE(int brt, const bool _buff_id){
do { do {
--x_coord; --x_coord;
// clear OE bit for all other pixels
row[x_coord] &= BITMASK_OE_CLEAR;
// Brightness control via OE toggle - disable matrix output at specified x_coord // Brightness control via OE toggle - disable matrix output at specified x_coord
if((coloridx > lsbMsbTransitionBit || !coloridx) && ((x_coord) >= brt)){ if((coloridx > lsbMsbTransitionBit || !coloridx) && ((x_coord) >= brt)){
row[x_coord] |= BIT_OE; // Disable output after this point. row[x_coord] |= BIT_OE; // Disable output after this point.
continue; continue;
} }
// special case for the bits *after* LSB through (lsbMsbTransitionBit) - OE is output after data is shifted, so need to set OE to fractional brightness // special case for the bits *after* LSB through (lsbMsbTransitionBit) - OE is output after data is shifted, so need to set OE to fractional brightness
if(coloridx && coloridx <= lsbMsbTransitionBit) { if(coloridx && coloridx <= lsbMsbTransitionBit) {
// divide brightness in half for each bit below lsbMsbTransitionBit // divide brightness in half for each bit below lsbMsbTransitionBit
int lsbBrightness = brt >> (lsbMsbTransitionBit - coloridx + 1); int lsbBrightness = brt >> (lsbMsbTransitionBit - coloridx + 1);
if((x_coord) >= lsbBrightness) { if((x_coord) >= lsbBrightness) {
row[x_coord] |= BIT_OE; // Disable output after this point. row[x_coord] |= BIT_OE; // Disable output after this point.
continue; continue;
} }
} }
// clear OE bit for all other pixels
row[x_coord] &= BITMASK_OE_CLEAR;
} while(x_coord); } while(x_coord);
// need to disable OE before/after latch to hide row transition // need to disable OE before/after latch to hide row transition
@ -784,14 +786,14 @@ void MatrixPanel_I2S_DMA::brtCtrlOE(int brt, const bool _buff_id){
do { do {
--_blank; --_blank;
#ifdef ESP32_SXXX #ifdef ESP32_SXXX
row[0 + _blank] |= BIT_OE; row[0 + _blank] |= BIT_OE;
#else #else
// Original ESP32 WROOM FIFO Ordering Sucks // Original ESP32 WROOM FIFO Ordering Sucks
uint8_t _blank_row_tx_fifo_tmp = 0 + _blank; uint8_t _blank_row_tx_fifo_tmp = 0 + _blank;
(_blank_row_tx_fifo_tmp & 1U) ? --_blank_row_tx_fifo_tmp : ++_blank_row_tx_fifo_tmp; (_blank_row_tx_fifo_tmp & 1U) ? --_blank_row_tx_fifo_tmp : ++_blank_row_tx_fifo_tmp;
row[_blank_row_tx_fifo_tmp] |= BIT_OE; row[_blank_row_tx_fifo_tmp] |= BIT_OE;
#endif #endif
//row[0 + _blank] |= BIT_OE; //row[0 + _blank] |= BIT_OE;
// no need, has been done already // no need, has been done already
@ -867,9 +869,9 @@ void MatrixPanel_I2S_DMA::hlineDMA(int16_t x_coord, int16_t y_coord, int16_t l,
/* LED Brightness Compensation */ /* LED Brightness Compensation */
#ifndef NO_CIE1931 #ifndef NO_CIE1931
red = lumConvTab[red]; red = lumConvTab[red];
green = lumConvTab[green]; green = lumConvTab[green];
blue = lumConvTab[blue]; blue = lumConvTab[blue];
#endif #endif
uint16_t _colorbitclear = BITMASK_RGB1_CLEAR, _colorbitoffset = 0; uint16_t _colorbitclear = BITMASK_RGB1_CLEAR, _colorbitoffset = 0;
@ -888,14 +890,14 @@ void MatrixPanel_I2S_DMA::hlineDMA(int16_t x_coord, int16_t y_coord, int16_t l,
// let's precalculate RGB1 and RGB2 bits than flood it over the entire DMA buffer // let's precalculate RGB1 and RGB2 bits than flood it over the entire DMA buffer
uint16_t RGB_output_bits = 0; uint16_t RGB_output_bits = 0;
// uint8_t mask = (1 << color_depth_idx COLOR_DEPTH_LESS_THAN_8BIT_ADJUST); // uint8_t mask = (1 << color_depth_idx COLOR_DEPTH_LESS_THAN_8BIT_ADJUST);
#if PIXEL_COLOR_DEPTH_BITS < 8 #if PIXEL_COLOR_DEPTH_BITS < 8
uint8_t mask = (1 << (color_depth_idx+MASK_OFFSET)); // expect 24 bit color (8 bits per RGB subpixel) uint8_t mask = (1 << (color_depth_idx+MASK_OFFSET)); // expect 24 bit color (8 bits per RGB subpixel)
#else #else
uint8_t mask = (1 << (color_depth_idx)); // expect 24 bit color (8 bits per RGB subpixel) uint8_t mask = (1 << (color_depth_idx)); // expect 24 bit color (8 bits per RGB subpixel)
#endif #endif
/* Per the .h file, the order of the output RGB bits is: /* Per the .h file, the order of the output RGB bits is:
* BIT_B2, BIT_G2, BIT_R2, BIT_B1, BIT_G1, BIT_R1 */ * BIT_B2, BIT_G2, BIT_R2, BIT_B1, BIT_G1, BIT_R1 */
RGB_output_bits |= (bool)(blue & mask); // --B RGB_output_bits |= (bool)(blue & mask); // --B
RGB_output_bits <<= 1; RGB_output_bits <<= 1;
RGB_output_bits |= (bool)(green & mask); // -BG RGB_output_bits |= (bool)(green & mask); // -BG
@ -949,9 +951,9 @@ void MatrixPanel_I2S_DMA::vlineDMA(int16_t x_coord, int16_t y_coord, int16_t l,
/* LED Brightness Compensation */ /* LED Brightness Compensation */
#ifndef NO_CIE1931 #ifndef NO_CIE1931
red = lumConvTab[red]; red = lumConvTab[red];
green = lumConvTab[green]; green = lumConvTab[green];
blue = lumConvTab[blue]; blue = lumConvTab[blue];
#endif #endif
#ifndef ESP32_SXXX #ifndef ESP32_SXXX
@ -965,15 +967,15 @@ void MatrixPanel_I2S_DMA::vlineDMA(int16_t x_coord, int16_t y_coord, int16_t l,
// let's precalculate RGB1 and RGB2 bits than flood it over the entire DMA buffer // let's precalculate RGB1 and RGB2 bits than flood it over the entire DMA buffer
// uint8_t mask = (1 << color_depth_idx COLOR_DEPTH_LESS_THAN_8BIT_ADJUST); // uint8_t mask = (1 << color_depth_idx COLOR_DEPTH_LESS_THAN_8BIT_ADJUST);
#if PIXEL_COLOR_DEPTH_BITS < 8 #if PIXEL_COLOR_DEPTH_BITS < 8
uint8_t mask = (1 << (color_depth_idx+MASK_OFFSET)); // expect 24 bit color (8 bits per RGB subpixel) uint8_t mask = (1 << (color_depth_idx+MASK_OFFSET)); // expect 24 bit color (8 bits per RGB subpixel)
#else #else
uint8_t mask = (1 << (color_depth_idx)); // expect 24 bit color (8 bits per RGB subpixel) uint8_t mask = (1 << (color_depth_idx)); // expect 24 bit color (8 bits per RGB subpixel)
#endif #endif
uint16_t RGB_output_bits = 0; uint16_t RGB_output_bits = 0;
/* Per the .h file, the order of the output RGB bits is: /* Per the .h file, the order of the output RGB bits is:
* BIT_B2, BIT_G2, BIT_R2, BIT_B1, BIT_G1, BIT_R1 */ * BIT_B2, BIT_G2, BIT_R2, BIT_B1, BIT_G1, BIT_R1 */
RGB_output_bits |= (bool)(blue & mask); // --B RGB_output_bits |= (bool)(blue & mask); // --B
RGB_output_bits <<= 1; RGB_output_bits <<= 1;
RGB_output_bits |= (bool)(green & mask); // -BG RGB_output_bits |= (bool)(green & mask); // -BG

1
ESP32-HUB75-MatrixPanel-I2S-DMA.h
View file

@ -132,7 +132,6 @@
#define ESP32_I2S_DMA_MODE I2S_PARALLEL_WIDTH_16 // From esp32_i2s_parallel_v2.h = 16 bits in parallel #define ESP32_I2S_DMA_MODE I2S_PARALLEL_WIDTH_16 // From esp32_i2s_parallel_v2.h = 16 bits in parallel
#define ESP32_I2S_DMA_STORAGE_TYPE uint16_t // DMA output of one uint16_t at a time. #define ESP32_I2S_DMA_STORAGE_TYPE uint16_t // DMA output of one uint16_t at a time.
#define CLKS_DURING_LATCH 0 // Not (yet) used. #define CLKS_DURING_LATCH 0 // Not (yet) used.
#define ESP32_I2S_DEVICE I2S_NUM_0
// Panel Upper half RGB (numbering according to order in DMA gpio_bus configuration) // Panel Upper half RGB (numbering according to order in DMA gpio_bus configuration)
#define BITS_RGB1_OFFSET 0 // Start point of RGB_X1 bits #define BITS_RGB1_OFFSET 0 // Start point of RGB_X1 bits

34
esp32_i2s_parallel_dma.c
View file

@ -22,7 +22,6 @@
#include <driver/gpio.h> #include <driver/gpio.h>
#include <driver/periph_ctrl.h> #include <driver/periph_ctrl.h>
#include <rom/gpio.h>
#include <soc/gpio_sig_map.h> #include <soc/gpio_sig_map.h>
// For I2S state management. // For I2S state management.
@ -47,41 +46,28 @@ volatile bool previousBufferFree = true;
static void IRAM_ATTR irq_hndlr(void* arg) { // if we use I2S1 (default) static void IRAM_ATTR irq_hndlr(void* arg) { // if we use I2S1 (default)
#ifdef ESP32_ORIG //i2s_port_t port = *((i2s_port_t*) arg);
if ( (*(i2s_port_t*)arg) == I2S_NUM_1 ) { // https://www.bogotobogo.com/cplusplus/pointers2_voidpointers_arrays.php /* Compiler pre-processor check. Saves a few cycles, no need to cast void ptr to i2s_port_t and then check 120 times second... */
//For I2S1 #if ESP32_I2S_DEVICE == I2S_NUM_0
SET_PERI_REG_BITS(I2S_INT_CLR_REG(1), I2S_OUT_EOF_INT_CLR_V, 1, I2S_OUT_EOF_INT_CLR_S); SET_PERI_REG_BITS(I2S_INT_CLR_REG(1), I2S_OUT_EOF_INT_CLR_V, 1, I2S_OUT_EOF_INT_CLR_S);
} else { #else
// For I2S0 // For I2S0
SET_PERI_REG_BITS(I2S_INT_CLR_REG(0), I2S_OUT_EOF_INT_CLR_V, 1, I2S_OUT_EOF_INT_CLR_S); SET_PERI_REG_BITS(I2S_INT_CLR_REG(0), I2S_OUT_EOF_INT_CLR_V, 1, I2S_OUT_EOF_INT_CLR_S);
}
#else
// Other ESP32 MCU's only have one I2S
SET_PERI_REG_BITS(I2S_INT_CLR_REG(0), I2S_OUT_EOF_INT_CLR_V, 1, I2S_OUT_EOF_INT_CLR_S);
#endif #endif
/*
if ( previousBufferOutputLoopCount == 1)
{
// at this point, the previously active buffer is free, go ahead and write to it
previousBufferFree = true;
////previousBufferOutputLoopCount = 0;
//i2s_parallel_set_previous_buffer_not_free();
}
else { previousBufferOutputLoopCount++; }
*/
previousBufferFree = true; previousBufferFree = true;
// if(shiftCompleteCallback) // we've defined a callback function ? /*
// shiftCompleteCallback(); if(shiftCompleteCallback) { // we've defined a callback function ?
shiftCompleteCallback();
}
*/
} // end irq_hndlr } // end irq_hndlr
// For peripheral setup and configuration // For peripheral setup and configuration
static inline int get_bus_width(i2s_parallel_cfg_bits_t width) { static inline int get_bus_width(i2s_parallel_cfg_bits_t width) {
switch(width) { switch(width) {
case I2S_PARALLEL_WIDTH_8: case I2S_PARALLEL_WIDTH_8:

3
esp32_i2s_parallel_dma.h
View file

@ -19,7 +19,8 @@ extern "C" {
#include <freertos/FreeRTOS.h> #include <freertos/FreeRTOS.h>
#include <driver/i2s.h> #include <driver/i2s.h>
#include <esp_err.h> #include <esp_err.h>
#include <rom/lldesc.h> #include <esp32/rom/lldesc.h>
#include <esp32/rom/gpio.h>
// Get MCU Type and Max CLK Hz for MCU // Get MCU Type and Max CLK Hz for MCU
#include <esp32_i2s_parallel_mcu_def.h> #include <esp32_i2s_parallel_mcu_def.h>

313
esp32_i2s_parallel_dma_cxxx.txt
View file

@ -1,313 +0,0 @@
/*
* ESP32_I2S_PARALLEL_DMA (Version 3)
*
* Author: Mrfaptastic @ https://github.com/mrfaptastic/
*
* Description: Multi-ESP32 product DMA setup functions for ESP32 C3/H2 RISC-V chips
*
* ESP32C series doesn't support LCD mode / parallel DMA!
*
*/
// Header
#include "esp32_i2s_parallel_dma.h"
#if defined(ESP32_CXXX)
#include <esp_err.h>
// Turn on and off a peripheral
#include <driver/periph_ctrl.h>
// GPIO
#include <soc/gpio_periph.h>
#include <hal/gpio_types.h>
#include <driver/gpio.h>
#include <driver/periph_ctrl.h>
#include <rom/gpio.h>
#include <soc/gpio_sig_map.h>
// DMA Linked List Struct
#include <soc/lldesc.h>
#include <soc/io_mux_reg.h>
// I2S
#include <soc/i2s_struct.h>
#include <soc/i2s_reg.h>
// GDMA
#include <soc/gdma_channel.h>
#include <soc/gdma_periph.h>
#include <soc/gdma_reg.h>
#include <soc/gdma_struct.h>
// For I2S state management.
static i2s_parallel_state_t *i2s_state = NULL;
// ESP32-S2,S3,C3 only has IS20
// Original ESP32 has two I2S's, but we'll stick with the lowest common denominator.
static i2s_dev_t* I2S = &I2S0; // Device to use for this library, change if you want.
callback shiftCompleteCallback;
void setShiftCompleteCallback(callback f) {
shiftCompleteCallback = f;
}
volatile bool previousBufferFree = true;
static void IRAM_ATTR gdma_irq_handler(void* arg) { // if we use I2S1 (default)
GDMA.intr[0].clr.out_eof = 1;
// at this point, the previously active buffer is free, go ahead and write to it
// previousBufferFree = true;
// if(shiftCompleteCallback) // we've defined a callback function ?
// shiftCompleteCallback();
// at this point, the previously active buffer is free, go ahead and write to it
previousBufferFree = true;
if(shiftCompleteCallback) // we've defined a callback function ?
shiftCompleteCallback();
} // end irq_hndlr
// For peripheral setup and configuration
static inline int get_bus_width(i2s_parallel_cfg_bits_t width) {
switch(width) {
case I2S_PARALLEL_WIDTH_8:
return 8;
case I2S_PARALLEL_WIDTH_16:
return 16;
case I2S_PARALLEL_WIDTH_24:
return 24;
default:
return -ESP_ERR_INVALID_ARG;
}
}
static void gpio_setup_out(int gpio, int sig) {
if(gpio < 0) {
return;
}
// Configure GPIO
// https://github.com/espressif/esp-idf/blob/d5f58ab13551cd883e8d8478ba367b6e4543ffec/examples/peripherals/gpio/generic_gpio/main/gpio_example_main.c
gpio_config_t io_conf = {};
io_conf.intr_type = GPIO_INTR_DISABLE;
io_conf.mode = GPIO_MODE_DEF_OUTPUT;
io_conf.pin_bit_mask = (1ULL << gpio);
io_conf.pull_down_en = 1;
io_conf.pull_up_en = 0;
gpio_config(&io_conf);
// Set IOMUX to GPIO
//gpio_iomux_out(gpio, sig, false); // ?? is sig right?
gpio_matrix_out(gpio, sig, false, false);
// Drive Strength to MAX
gpio_set_drive_capability((gpio_num_t)gpio, (gpio_drive_cap_t)3);
}
// DMA Linked List
// Size must be less than DMA_MAX - need to handle breaking long transfer into two descriptors before call
// DMA_MAX by the way is the maximum data packet size you can hold in one chunk
void link_dma_desc(volatile lldesc_t *dmadesc, volatile lldesc_t *prevdmadesc, void *memory, size_t size)
{
if(size > DMA_MAX) size = DMA_MAX;
dmadesc->size = size;
dmadesc->length = size;
dmadesc->buf = memory;
dmadesc->eof = 0;
dmadesc->sosf = 0;
dmadesc->owner = 1;
dmadesc->qe.stqe_next = 0; // will need to set this elsewhere
dmadesc->offset = 0;
// link previous to current
if(prevdmadesc)
prevdmadesc->qe.stqe_next = (lldesc_t*)dmadesc;
}
esp_err_t i2s_parallel_driver_install(i2s_port_t port, i2s_parallel_config_t* cfg) {
port = I2S_NUM_0; /// override.
if(port < I2S_NUM_0 || port >= I2S_NUM_MAX) {
return ESP_ERR_INVALID_ARG;
}
if(cfg->sample_width < I2S_PARALLEL_WIDTH_8 || cfg->sample_width >= I2S_PARALLEL_WIDTH_MAX) {
return ESP_ERR_INVALID_ARG;
}
if(cfg->sample_rate > I2S_PARALLEL_CLOCK_HZ || cfg->sample_rate < 1) {
return ESP_ERR_INVALID_ARG;
}
uint32_t clk_div_main = I2S_PARALLEL_CLOCK_HZ / cfg->sample_rate / i2s_parallel_get_memory_width(port, cfg->sample_width);
if(clk_div_main < 2 || clk_div_main > 0xFF) {
return ESP_ERR_INVALID_ARG;
}
// Setup GPIOs
int bus_width = get_bus_width(cfg->sample_width);
i2s_dev_t *i2s_dev = I2S; // There's only one I2S device on C3....
//Figure out which signal numbers to use for routing
//printf("Setting up parallel I2S bus at I2S%d\n", i2snum(dev));
int sig_data_base = I2SO_SD_OUT_IDX;
int sig_clk = I2SO_WS_OUT_IDX;
//Route the signals
for (int x=0; x < bus_width; x++) {
gpio_setup_out(cfg->gpio_bus[x], sig_data_base+x);
}
//ToDo: Clk/WS may need inversion?
gpio_setup_out(cfg->gpio_clk, sig_clk);
// Power on I2S1 (or 0)
periph_module_enable(PERIPH_I2S1_MODULE);
// Now it's apparently I2S0 !?
//i2s_dev_t *i2s_dev = &I2S0;
// Reset RX (not that we use it)
i2s_dev->rx_conf.val = 0;
i2s_dev->rx_conf.rx_reset=1; i2s_dev->rx_conf.rx_reset=0;
i2s_dev->rx_conf.rx_fifo_reset=1; i2s_dev->rx_conf.rx_fifo_reset=0;
// Reset TX (what we care about)
i2s_dev->tx_conf.val = 0;
i2s_dev->tx_conf.tx_reset=1; i2s_dev->tx_conf.tx_reset=0;
i2s_dev->tx_conf.tx_fifo_reset=1; i2s_dev->tx_conf.tx_fifo_reset=0;
i2s_dev->tx_conf.tx_chan_equal=1;
// Device setup
i2s_dev->tx_conf1.val = 0;
i2s_dev->tx_conf1.tx_bits_mod=16;//cfg->bits;
i2s_dev->rx_conf1.val = 0;
i2s_dev->rx_conf1.rx_bits_mod=16; //cfg->bits;
i2s_dev->tx_conf1.tx_bck_div_num=2;
i2s_dev->rx_conf1.rx_bck_div_num=2;
i2s_dev->tx_clkm_conf.val=0;
i2s_dev->tx_clkm_conf.tx_clk_sel=2; // 160mhz
// clock speed
i2s_dev->tx_clkm_conf.tx_clkm_div_num=160/16; // 10Mhz
//i2s_dev->tx_clkm_div_conf.val = 0; //
i2s_dev->tx_clkm_div_conf.tx_clkm_div_x = 0; // > ?
i2s_dev->tx_clkm_div_conf.tx_clkm_div_y = 0; //
i2s_dev->tx_clkm_div_conf.tx_clkm_div_yn1 = 0;
i2s_dev->tx_clkm_div_conf.tx_clkm_div_z = 0;
i2s_dev->tx_clkm_conf.tx_clk_active=1; // Start
//Allocate DMA descriptors
i2s_state = malloc(sizeof(i2s_parallel_state_t));
assert(i2s_state != NULL);
i2s_parallel_state_t *st= i2s_state;
st->desccount_a = cfg->desccount_a;
st->desccount_b = cfg->desccount_b;
st->dmadesc_a = cfg->lldesc_a;
st->dmadesc_b = cfg->lldesc_b;
// setup I2S Interrupt
// SET_PERI_REG_BITS(I2S_INT_ENA_REG(1), I2S_OUT_EOF_INT_ENA_V, 1, I2S_OUT_EOF_INT_ENA_S);
// allocate a level 1 interrupt: lowest priority, as ISR isn't urgent and may take a long time to complete
esp_intr_alloc(ETS_I2S1_INTR_SOURCE, (int)(ESP_INTR_FLAG_IRAM | ESP_INTR_FLAG_LEVEL1), gdma_irq_handler, NULL, NULL);
GDMA.intr[0].ena.out_eof = 1; //?
// Reset GDMA device
GDMA.channel[0].out.out_conf0.out_rst = 1; // REG_SET_BIT(DMA_OUT_CONF0_CH0_REG, DMA_OUT_RST_CH0);
GDMA.channel[0].out.out_conf0.out_rst = 0; // REG_CLR_BIT(DMA_OUT_CONF0_CH0_REG, DMA_OUT_RST_CH0);
// GDMA.channel[0].out.out_conf0.out_eof_mode = 1; ?
GDMA.misc_conf.ahbm_rst_inter = 1;
GDMA.misc_conf.ahbm_rst_inter = 0;
// Setup interrupt
// Setup outlink
GDMA.channel[0].out.out_link.addr = ((uint32_t)(&st->dmadesc_a[0]));// Set a value here
GDMA.channel[0].out.out_peri_sel.sel = SOC_GDMA_TRIG_PERIPH_I2S0; // 3 = I2S0
GDMA.channel[0].out.out_conf0.out_data_burst_en = 1;
GDMA.channel[0].out.out_conf0.outdscr_burst_en = 1;
GDMA.channel[0].out.out_link.start = 1;
while (!GDMA.intr->raw.out_eof) { } // check status
i2s_dev->tx_conf.tx_start = 1;
return ESP_OK;
}
esp_err_t i2s_parallel_stop_dma(i2s_port_t port) {
if(port < I2S_NUM_0 || port >= I2S_NUM_MAX) {
return ESP_ERR_INVALID_ARG;
}
// Not implemented
return ESP_OK;
}
esp_err_t i2s_parallel_send_dma(i2s_port_t port, lldesc_t* dma_descriptor) {
if(port < I2S_NUM_0 || port >= I2S_NUM_MAX) {
return ESP_ERR_INVALID_ARG;
}
// Not implemented
return ESP_OK;
}
i2s_dev_t* i2s_parallel_get_dev(i2s_port_t port) {
if(port < I2S_NUM_0 || port >= I2S_NUM_MAX) {
return NULL;
}
return I2S; // HARCODE THIS TO RETURN &I2S0
}
// Double buffering flipping
// Flip to a buffer: 0 for bufa, 1 for bufb
void i2s_parallel_flip_to_buffer(i2s_port_t port, int buffer_id) {
if (i2s_state == NULL) {
return; // :-()
}
lldesc_t *active_dma_chain;
if (buffer_id == 0) {
active_dma_chain=(lldesc_t*)&i2s_state->dmadesc_a[0];
} else {
active_dma_chain=(lldesc_t*)&i2s_state->dmadesc_b[0];
}
// setup linked list to refresh from new buffer (continuously) when the end of the current list has been reached
i2s_state->dmadesc_a[i2s_state->desccount_a-1].qe.stqe_next = active_dma_chain;
i2s_state->dmadesc_b[i2s_state->desccount_b-1].qe.stqe_next = active_dma_chain;
// we're still shifting out the buffer, so it shouldn't be written to yet.
previousBufferFree = false;
}
bool i2s_parallel_is_previous_buffer_free() {
return previousBufferFree;
}
// End ESP32 original / S2, S3 check
#endif

2
esp32_i2s_parallel_mcu_def.h
View file

@ -10,6 +10,7 @@
#if CONFIG_IDF_TARGET_ESP32S2 || CONFIG_IDF_TARGET_ESP32S3 #if CONFIG_IDF_TARGET_ESP32S2 || CONFIG_IDF_TARGET_ESP32S3
#define ESP32_SXXX 1 #define ESP32_SXXX 1
#define ESP32_I2S_DEVICE I2S_NUM_0
#define I2S_PARALLEL_CLOCK_HZ 160000000L #define I2S_PARALLEL_CLOCK_HZ 160000000L
#define DMA_MAX (4096-4) #define DMA_MAX (4096-4)
@ -18,6 +19,7 @@
// 2016 model that started it all, and this library. The best. // 2016 model that started it all, and this library. The best.
#define ESP32_ORIG 1 #define ESP32_ORIG 1
#define ESP32_I2S_DEVICE I2S_NUM_0
#define I2S_PARALLEL_CLOCK_HZ 80000000L #define I2S_PARALLEL_CLOCK_HZ 80000000L
#define DMA_MAX (4096-4) #define DMA_MAX (4096-4)