This commit is contained in:
mrfaptastic 2023-03-18 20:12:45 +00:00
parent 9308b59445
commit 9d36abeeaf
6 changed files with 1299 additions and 1332 deletions

File diff suppressed because it is too large Load diff

File diff suppressed because it is too large Load diff

View file

@ -28,54 +28,28 @@ Modified heavily for the ESP32 HUB75 DMA library by:
#include <driver/periph_ctrl.h>
#include <soc/gpio_sig_map.h>
#include <Arduino.h> // Need to make sure thi is uncommented to get ESP_LOG output on (Arduino) Serial output!!!!
#include <Arduino.h> // Need to make sure this is uncommented to get ESP_LOG output on (Arduino) Serial output!!!!
#include <esp_err.h>
#include <esp_log.h>
// Get CPU freq function.
#include <soc/rtc.h>
/*
callback shiftCompleteCallback;
void setShiftCompleteCallback(callback f) {
shiftCompleteCallback = f;
volatile bool previousBufferFree = true;
// Todo: handle IS20? (this is hard coded for I2S1 only)
static void IRAM_ATTR i2s_isr(void* arg) {
REG_WRITE(I2S_INT_CLR_REG(1), (REG_READ(I2S_INT_RAW_REG(1)) & 0xffffffc0) | 0x3f);
// at this point, the previously active buffer is free, go ahead and write to it
previousBufferFree = true;
}
volatile int previousBufferOutputLoopCount = 0;
volatile bool previousBufferFree = true;
bool DRAM_ATTR i2s_parallel_is_previous_buffer_free() {
return previousBufferFree;
}
static void IRAM_ATTR irq_hndlr(void* arg) { // if we use I2S1 (default)
SET_PERI_REG_BITS(I2S_INT_CLR_REG(ESP32_I2S_DEVICE), I2S_OUT_EOF_INT_CLR_V, 1, I2S_OUT_EOF_INT_CLR_S);
previousBufferFree = true;
} // end irq_hndlr
*/
volatile int DRAM_ATTR active_dma_buffer_output_count = 0;
void IRAM_ATTR irq_hndlr(void* arg) {
// Clear flag so we can get retriggered
SET_PERI_REG_BITS(I2S_INT_CLR_REG(ESP32_I2S_DEVICE), I2S_OUT_EOF_INT_CLR_V, 1, I2S_OUT_EOF_INT_CLR_S);
active_dma_buffer_output_count++;
/*
if ( active_dma_buffer_output_count++ )
{
// Disable DMA chain EOF interrupt until next requested flipbuffer.
// Otherwise we're needlessly generating interrupts we don't care about.
//SET_PERI_REG_BITS(I2S_INT_ENA_REG(ESP32_I2S_DEVICE), I2S_OUT_EOF_INT_ENA_V, 0, I2S_OUT_EOF_INT_ENA_S);
active_dma_buffer_output_count = 0;
}
*/
} // end irq_hndlr
// Static
i2s_dev_t* getDev()
@ -221,22 +195,6 @@ static void IRAM_ATTR irq_hndlr(void* arg) { // if we use I2S1 (default)
ESP_LOGD("ESP32/S2", "Requested output clock frequency: %d Mhz", (freq/1000000));
// What is the current CPU frequency?
/*
rtc_cpu_freq_config_t conf;
rtc_clk_cpu_freq_get_config(&conf);
auto source_freq = conf.source_freq_mhz;
ESP_LOGD("ESP32/S2", "PLL (source) frequency: %d", source_freq);
ESP_LOGD("ESP32/S2", "CPU frequency: %d", conf.freq_mhz);
*/
/*
if(_div_num < 2 || _div_num > 16) {
return false;
}
*/
// Calculate clock divider for ESP32-S2
#if defined (CONFIG_IDF_TARGET_ESP32S2)
@ -303,7 +261,7 @@ static void IRAM_ATTR irq_hndlr(void* arg) { // if we use I2S1 (default)
#endif
output_freq = output_freq + 0; // work around arudino 'unused var' issue if debug isn't enabled.
output_freq = output_freq + 0; // work around arudino 'unused var' issue if debug isn't enabled.
ESP_LOGI("ESP32/S2", "Output frequency is %ld Mhz??", (output_freq/1000000/i2s_parallel_get_memory_width(ESP32_I2S_DEVICE, 16)));
@ -415,21 +373,12 @@ static void IRAM_ATTR irq_hndlr(void* arg) { // if we use I2S1 (default)
/* If we have double buffering, then allocate an interrupt service routine function
* that can be used for I2S0/I2S1 created interrupts.
*/
if (_double_dma_buffer) {
// Get ISR setup
esp_err_t err = esp_intr_alloc(irq_source,
(int)(ESP_INTR_FLAG_IRAM | ESP_INTR_FLAG_LEVEL1),
irq_hndlr, NULL, NULL);
if(err) {
ESP_LOGE("ESP32/S2", "init() Failed to setup interrupt request handeler.");
return false;
}
// setup I2S Interrupt
SET_PERI_REG_BITS(I2S_INT_ENA_REG(1), I2S_OUT_EOF_INT_ENA_V, 1, I2S_OUT_EOF_INT_ENA_S);
// allocate a level 1 intterupt: lowest priority, as ISR isn't urgent and may take a long time to complete
esp_intr_alloc(ETS_I2S1_INTR_SOURCE, (int)(ESP_INTR_FLAG_IRAM | ESP_INTR_FLAG_LEVEL1), i2s_isr, NULL, NULL);
// Don't do this here. Don't enable just yet.
// dev->int_ena.out_eof = 1;
}
#if defined (CONFIG_IDF_TARGET_ESP32S2)
@ -490,7 +439,7 @@ static void IRAM_ATTR irq_hndlr(void* arg) { // if we use I2S1 (default)
ESP_LOGD("ESP32/S2", "Allocating the second buffer (double buffer enabled).");
_dmadesc_b= (HUB75_DMA_DESCRIPTOR_T*)heap_caps_malloc(sizeof(HUB75_DMA_DESCRIPTOR_T) * len, MALLOC_CAP_DMA);
_dmadesc_b = (HUB75_DMA_DESCRIPTOR_T*)heap_caps_malloc(sizeof(HUB75_DMA_DESCRIPTOR_T) * len, MALLOC_CAP_DMA);
if (_dmadesc_b == nullptr)
{
@ -611,20 +560,15 @@ static void IRAM_ATTR irq_hndlr(void* arg) { // if we use I2S1 (default)
} // end
void Bus_Parallel16::flip_dma_output_buffer(int &current_back_buffer_id) // pass by reference so we can change in main matrixpanel class
void Bus_Parallel16::flip_dma_output_buffer(int buffer_id) // pass by reference so we can change in main matrixpanel class
{
// Setup interrupt handler which is focussed only on the (page 322 of Tech. Ref. Manual)
// "I2S_OUT_EOF_INT: Triggered when rxlink has finished sending a packet" (when dma linked list with eof = 1 is hit)
//_dev->int_ena.out_eof = 1;
_dev->int_ena.out_eof = 1; // enable interrupt
if ( current_back_buffer_id == 1) {
if ( buffer_id == 1) {
_dmadesc_a[_dmadesc_last].qe.stqe_next = &_dmadesc_b[0]; // Start sending out _dmadesc_b (or buffer 1)
active_dma_buffer_output_count = 0;
while (!active_dma_buffer_output_count) {}
_dmadesc_a[_dmadesc_last].qe.stqe_next = &_dmadesc_b[0]; // Start sending out _dmadesc_b (or buffer 1)
//fix _dmadesc_ loop issue #407
//need to connect the up comming _dmadesc_ not the old one
@ -633,17 +577,15 @@ static void IRAM_ATTR irq_hndlr(void* arg) { // if we use I2S1 (default)
} else {
_dmadesc_b[_dmadesc_last].qe.stqe_next = &_dmadesc_a[0];
active_dma_buffer_output_count = 0;
while (!active_dma_buffer_output_count) {}
_dmadesc_a[_dmadesc_last].qe.stqe_next = &_dmadesc_a[0];
}
current_back_buffer_id ^= 1;
// Disable intterupt
_dev->int_ena.out_eof = 0;
previousBufferFree = false;
while (i2s_parallel_is_previous_buffer_free() == false) {}
} // end flip

View file

@ -49,9 +49,8 @@ Contributors:
#define DMA_MAX (4096-4)
#ifndef ESP32_I2S_DEVICE
#define ESP32_I2S_DEVICE I2S_NUM_0
#endif
// DO NOT CHANGE
#define ESP32_I2S_DEVICE I2S_NUM_1
// The type used for this SoC
#define HUB75_DMA_DESCRIPTOR_T lldesc_t
@ -119,7 +118,7 @@ i2s_dev_t* getDev();
void dma_transfer_start();
void dma_transfer_stop();
void flip_dma_output_buffer(int &current_back_buffer_id);
void flip_dma_output_buffer(int buffer_id);
private:

View file

@ -441,12 +441,12 @@
} // end
void Bus_Parallel16::flip_dma_output_buffer(int &current_back_buffer_id)
void Bus_Parallel16::flip_dma_output_buffer(int back_buffer_id)
{
// if ( _double_dma_buffer == false) return;
if ( current_back_buffer_id == 1) // change across to everything 'b''
if ( back_buffer_id == 1) // change across to everything 'b''
{
_dmadesc_a[_dmadesc_count-1].next = (dma_descriptor_t *) &_dmadesc_b[0];
_dmadesc_b[_dmadesc_count-1].next = (dma_descriptor_t *) &_dmadesc_b[0];
@ -457,7 +457,7 @@
_dmadesc_a[_dmadesc_count-1].next = (dma_descriptor_t *) &_dmadesc_a[0];
}
current_back_buffer_id ^= 1;
//current_back_buffer_id ^= 1;
} // end flip

View file

@ -147,7 +147,7 @@
void dma_transfer_start();
void dma_transfer_stop();
void flip_dma_output_buffer(int &current_back_buffer_id);
void flip_dma_output_buffer(int back_buffer_id);
private: