Update README.md
This commit is contained in:
parent
5caea96424
commit
bbc5c7a04c
1 changed files with 5 additions and 1 deletions
|
@ -66,7 +66,11 @@ A [typical RGB panel available for purchase](https://www.aliexpress.com/item/256
|
||||||
|
|
||||||
Yes you can. If you want to use with a 64x64 pixel panel (typically a HUB75*E* panel) you MUST configure a valid *E_PIN* to your ESP32 and connect it to the E pin of the HUB75 panel! Hence the 'E' in 'HUB75E'
|
Yes you can. If you want to use with a 64x64 pixel panel (typically a HUB75*E* panel) you MUST configure a valid *E_PIN* to your ESP32 and connect it to the E pin of the HUB75 panel! Hence the 'E' in 'HUB75E'
|
||||||
|
|
||||||
This library has only been tested with a 64 pixel (wide) and 32 (high) RGB panel. Theoretically, if you want to chain /n/ of these horizontally to make a (n*64)x32 panel you can do so with the cable and then set the MATRIX_WIDTH to '64*/n/'. Refer to the [Chained Panels](examples/ChainedPanels/) example.
|
This library has only been tested with a 64 pixel (wide) and 32 (high) RGB panel. Theoretically, if you want to chain two of these horizontally to make a 128x32 panel you can easily by setting the MATRIX_WIDTH to '128' and connecting the panels in series using the HUB75 ribbon cable.
|
||||||
|
|
||||||
|
Similarly, if you wanted to chain 4 panels to make a 256x32 px horizontal panel, you can easily by setting the MATRIX_WIDTH to '256' and connecting the panels in series using the HUB75 ribbon cable.
|
||||||
|
|
||||||
|
Finally, if you wanted to chain 4 x (64x32px) panels to make 128x64px display (essentially a 2x2 grid of physical led panel modules), a little more magic will be required. Refer to the [Chained Panels](examples/ChainedPanels/) example.
|
||||||
|
|
||||||
## Ghosting
|
## Ghosting
|
||||||
|
|
||||||
|
|
Loading…
Reference in a new issue