From 584b24f722bc130e79779e3cddf6b10834bd0633 Mon Sep 17 00:00:00 2001 From: Brian Lough Date: Tue, 22 Jun 2021 22:19:59 +0100 Subject: [PATCH] Fixing typos in the "Panel Brightness" section Readme referred to `setPanelBrightness8` in several places, but it doesn't exist. Correct name is `setBrightness8` --- README.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/README.md b/README.md index 953ec2e..7afa42f 100644 --- a/README.md +++ b/README.md @@ -169,7 +169,7 @@ By default you should not need to change / set the brightness setting as the def The value to pass `setPanelBrightness()` must be less than MATRIX_CHAIN_WIDTH in pixels. For example for a single 64x32 LED Matrix Module, a value must be less than 64. For 3 modules 64x32 it must be less than 192. However, if you set the brightness too high, you may experience ghosting. -Also you may use method `setPanelBrightness8(x)`, where x is a uint8_t value between 0-255. Library will recalculate required brightness level depending on matrix width (mostly useful with FastLED-based sketches). +Also you may use method `setBrightness8(x)`, where x is a uint8_t value between 0-255. Library will recalculate required brightness level depending on matrix width (mostly useful with FastLED-based sketches). Example: ``` @@ -179,7 +179,7 @@ Serial.begin(115200); matrix.setPanelBrightness(16); // Set the brightness. 32 or lower ideal for a single 64x32 LED Matrix Panel. // or another way - matrix.setPanelBrightness8(192); // Set the brightness to about 3/4 or 75% (192/256) of maximum. + matrix.setBrightness8(192); // Set the brightness to about 3/4 or 75% (192/256) of maximum. } ```