ScStw/ESP32-HUB75-MatrixPanel-DMA
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Fix #377

Browse source
This commit is contained in:
mrfaptastic 2023-01-22 13:22:36 +00:00
parent 9c5737ddf1
commit dcdd3e8cad
3 changed files with 157 additions and 111 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

8
src/ESP32-HUB75-MatrixPanel-I2S-DMA.cpp
View file

@ -85,6 +85,8 @@ bool MatrixPanel_I2S_DMA::allocateDMAmemory()
// calculate the lowest LSBMSB_TRANSITION_BIT value that will fit in memory that will meet or exceed the configured refresh rate
#if !defined(FORCE_COLOUR_DEPTH)
ESP_LOGI("I2S-DMA", "Minimum visual refresh rate (scan rate from panel top to bottom) requested: %d Hz", m_cfg.min_refresh_rate);
while(1) {
int psPerClock = 1000000000000UL/m_cfg.i2sspeed;
int nsPerLatch = ((PIXELS_PER_ROW + CLKS_DURING_LATCH) * psPerClock) / 1000;
@ -110,6 +112,12 @@ bool MatrixPanel_I2S_DMA::allocateDMAmemory()
else
break;
}
if ( lsbMsbTransitionBit > 0 )
{
ESP_LOGW("I2S-DMA", "lsbMsbTransitionBit of %d used to achieve refresh rate of %d Hz. Percieved colour depth to the eye may be reduced.", lsbMsbTransitionBit, m_cfg.min_refresh_rate);
}
#endif

6
src/ESP32-HUB75-MatrixPanel-I2S-DMA.h
View file

@ -202,7 +202,7 @@ struct HUB75_I2S_CFG {
/**
* I2S clock speed selector
*/
enum clk_speed {HZ_8M=8000000, HZ_10M=10000000, HZ_16M=16000000, HZ_20M=20000000};
enum clk_speed {HZ_10M=10000000, HZ_15M=15000000, HZ_20M=20000000};
// Structure Variables
@ -259,10 +259,10 @@ struct HUB75_I2S_CFG {
LAT_PIN_DEFAULT, OE_PIN_DEFAULT, CLK_PIN_DEFAULT },
shift_driver _drv = SHIFTREG,
bool _dbuff = false,
clk_speed _i2sspeed = HZ_16M,
clk_speed _i2sspeed = HZ_15M,
uint8_t _latblk = DEFAULT_LAT_BLANKING, // Anything > 1 seems to cause artefacts on ICS panels
bool _clockphase = true,
uint8_t _min_refresh_rate = 85
uint8_t _min_refresh_rate = 60
) : mx_width(_w),
mx_height(_h),
chain_length(_chain),

254
src/platforms/esp32/esp32_i2s_parallel_dma.cpp
View file

@ -28,10 +28,13 @@ Modified heavily for the ESP32 HUB75 DMA library by:
#include <driver/periph_ctrl.h>
#include <soc/gpio_sig_map.h>
#include <Arduino.h> // Need to uncomment this to get ESP_LOG output on the Arduino Serial!!!!
#include <Arduino.h> // Need to make sure thi is uncommented to get ESP_LOG output on (Arduino) Serial output!!!!
#include <esp_err.h>
#include <esp_log.h>
// Get CPU freq function.
#include <soc/rtc.h>
/*
callback shiftCompleteCallback;
@ -53,49 +56,76 @@ static void IRAM_ATTR irq_hndlr(void* arg) { // if we use I2S1 (default)
} // end irq_hndlr
*/
volatile int active_dma_buffer_output_count = 0;
volatile int active_dma_buffer_output_count = 0;
void IRAM_ATTR irq_hndlr(void* arg) {
void IRAM_ATTR irq_hndlr(void* arg) {
// Clear flag so we can get retriggered
SET_PERI_REG_BITS(I2S_INT_CLR_REG(ESP32_I2S_DEVICE), I2S_OUT_EOF_INT_CLR_V, 1, I2S_OUT_EOF_INT_CLR_S);
// Clear flag so we can get retriggered
SET_PERI_REG_BITS(I2S_INT_CLR_REG(ESP32_I2S_DEVICE), I2S_OUT_EOF_INT_CLR_V, 1, I2S_OUT_EOF_INT_CLR_S);
active_dma_buffer_output_count++;
active_dma_buffer_output_count++;
/*
if ( active_dma_buffer_output_count++ )
{
// Disable DMA chain EOF interrupt until next requested flipbuffer.
// Otherwise we're needlessly generating interrupts we don't care about.
//SET_PERI_REG_BITS(I2S_INT_ENA_REG(ESP32_I2S_DEVICE), I2S_OUT_EOF_INT_ENA_V, 0, I2S_OUT_EOF_INT_ENA_S);
active_dma_buffer_output_count = 0;
}
*/
/*
if ( active_dma_buffer_output_count++ )
{
// Disable DMA chain EOF interrupt until next requested flipbuffer.
// Otherwise we're needlessly generating interrupts we don't care about.
//SET_PERI_REG_BITS(I2S_INT_ENA_REG(ESP32_I2S_DEVICE), I2S_OUT_EOF_INT_ENA_V, 0, I2S_OUT_EOF_INT_ENA_S);
active_dma_buffer_output_count = 0;
}
*/
} // end irq_hndlr
} // end irq_hndlr
// Static
i2s_dev_t* getDev()
{
#if defined (CONFIG_IDF_TARGET_ESP32S2)
return &I2S0;
#else
return (ESP32_I2S_DEVICE == 0) ? &I2S0 : &I2S1;
#endif
// Static
i2s_dev_t* getDev()
{
#if defined (CONFIG_IDF_TARGET_ESP32S2)
return &I2S0;
#else
return (ESP32_I2S_DEVICE == 0) ? &I2S0 : &I2S1;
#endif
}
}
// Static
void _gpio_pin_init(int pin)
{
if (pin >= 0)
{
gpio_pad_select_gpio(pin);
//gpio_hi(pin);
gpio_set_direction((gpio_num_t)pin, GPIO_MODE_OUTPUT);
gpio_set_drive_capability((gpio_num_t)pin, (gpio_drive_cap_t)3); // esp32s3 as well?
}
}
inline int i2s_parallel_get_memory_width(int port, int width) {
switch(width) {
case 8:
#if !defined (CONFIG_IDF_TARGET_ESP32S2)
// Only I2S1 on the legacy ESP32 WROOM MCU supports space saving single byte 8 bit parallel access
if(port == 1)
{
return 1;
} else {
return 2;
}
#else
return 1;
#endif
case 16:
return 2;
case 24:
return 4;
default:
return -ESP_ERR_INVALID_ARG;
}
}
// Static
void _gpio_pin_init(int pin)
{
if (pin >= 0)
{
gpio_pad_select_gpio(pin);
//gpio_hi(pin);
gpio_set_direction((gpio_num_t)pin, GPIO_MODE_OUTPUT);
gpio_set_drive_capability((gpio_num_t)pin, (gpio_drive_cap_t)3); // esp32s3 as well?
}
}
void Bus_Parallel16::config(const config_t& cfg)
{
@ -187,89 +217,96 @@ static void IRAM_ATTR irq_hndlr(void* arg) { // if we use I2S1 (default)
////////////////////////////// Clock configuration //////////////////////////////
auto freq = (_cfg.bus_freq);
size_t _div_num = 10;
auto freq = (_cfg.bus_freq);
ESP_LOGD("ESP32/S2", "Requested output clock frequency: %d Mhz", (freq/1000000));
// What is the current CPU frequency?
/*
rtc_cpu_freq_config_t conf;
rtc_clk_cpu_freq_get_config(&conf);
auto source_freq = conf.source_freq_mhz;
ESP_LOGD("ESP32/S2", "PLL (source) frequency: %d", source_freq);
ESP_LOGD("ESP32/S2", "CPU frequency: %d", conf.freq_mhz);
*/
/*
if(_div_num < 2 || _div_num > 16) {
return false;
}
*/
// Calculate clock divider for ESP32-S2
#if defined (CONFIG_IDF_TARGET_ESP32S2)
// Right shift (>> 1) and divide 160mhz in half to 80Mhz for the calc due to the fact
// that later we must have tx_bck_div_num = 2 for both esp32 and esp32-s2
static constexpr uint32_t pll_160M_clock_d2 = 160 * 1000 * 1000 >> 1;
//static uint32_t pll_160M_clock_d2 = 160 * 1000 * 1000 >> 1;
// I2S_CLKM_DIV_NUM 2=40MHz / 3=27MHz / 4=20MHz / 5=16MHz / 8=10MHz / 10=8MHz
_div_num = std::min(255u, 1 + ((pll_160M_clock_d2) / (1 + freq)));
//auto _div_num = std::min(255u, 1 + ((pll_160M_clock_d2) / (1 + freq)));
auto _div_num = 160000000L / freq / i2s_parallel_get_memory_width(ESP32_I2S_DEVICE, 16); // 16 bits in parallel
/*
_clkdiv_write = I2S_CLK_160M_PLL << I2S_CLK_SEL_S
| I2S_CLK_EN
| 1 << I2S_CLKM_DIV_A_S
| 0 << I2S_CLKM_DIV_B_S
| _div_num << I2S_CLKM_DIV_NUM_S
;
*/
#else
// clock = 80MHz(PLL_D2_CLK)
static constexpr uint32_t pll_d2_clock = 80 * 1000 * 1000;
// I2S_CLKM_DIV_NUM 4=20MHz / 5=16MHz / 8=10MHz / 10=8MHz
_div_num = std::min(255u, std::max(3u, 1 + (pll_d2_clock / (1 + freq))));
if(_div_num < 2 || _div_num > 0xFF) {
// return ESP_ERR_INVALID_ARG;
_div_num = 8;
}
ESP_LOGD("ESP32", "i2s pll_160M_clock_d2 clkm_div_num is: %d", _div_num);
// I2S_CLK_SEL Set this bit to select I2S module clock source.
// 0: No clock. 1: APLL_CLK. 2: PLL_160M_CLK. 3: No clock. (R/W)
dev->clkm_conf.clk_sel = 2;
dev->clkm_conf.clkm_div_a = 1; // Clock denominator
dev->clkm_conf.clkm_div_b = 0; // Clock numerator
dev->clkm_conf.clkm_div_num = _div_num;
dev->clkm_conf.clk_en = 1;
// Calc
auto output_freq = (160000000L/_div_num);
// Calculate clock divider for Original ESP32
#else
// Note: clkm_div_num must only be set here AFTER clkm_div_b, clkm_div_a, etc. Or weird things happen!
// On original ESP32, max I2S DMA parallel speed is 20Mhz.
// 160Mhz is only assured when the CPU clock is 240Mhz on the ESP32...
// [esp32-hal-cpu.c:244] setCpuFrequencyMhz(): PLL: 480 / 2 = 240 Mhz, APB: 80000000 Hz
//static uint32_t pll_d2_clock = (source_freq/2) * 1000 * 1000 >> 1;
// I2S_CLKM_DIV_NUM 2=40MHz / 3=27MHz / 4=20MHz / 5=16MHz / 8=10MHz / 10=8MHz
//auto _div_num = std::min(255u, 1 + ((pll_d2_clock) / (1 + freq)));
auto _div_num = 80000000L / freq / i2s_parallel_get_memory_width(ESP32_I2S_DEVICE, 16); // 16 bits in parallel
if(_div_num < 2 || _div_num > 0xFF) {
// return ESP_ERR_INVALID_ARG;
_div_num = 4;
}
///auto _div_num = 80000000L/freq;
ESP_LOGD("ESP32", "i2s pll_d2_clock clkm_div_num is: %d", _div_num);
dev->clkm_conf.clka_en=1; // Use the 80mhz system clock (PLL_D2_CLK) when '0'
dev->clkm_conf.clkm_div_a = 1; // Clock denominator
dev->clkm_conf.clkm_div_b = 0; // Clock numerator
dev->clkm_conf.clkm_div_num = _div_num;
auto output_freq = (80000000L/_div_num);
/*
_clkdiv_write = I2S_CLK_EN
| 1 << I2S_CLKM_DIV_A_S
| 0 << I2S_CLKM_DIV_B_S
| _div_num << I2S_CLKM_DIV_NUM_S
;
*/
#endif
if(_div_num < 2 || _div_num > 16) {
return false;
}
ESP_LOGI("ESP32/S2", "i2s pll clk_div_main is: %d", _div_num);
output_freq = output_freq + 0; // work around arudino 'unused var' issue if debug isn't enabled.
ESP_LOGI("ESP32/S2", "Output frequency is %d Mhz??", (output_freq/1000000/i2s_parallel_get_memory_width(ESP32_I2S_DEVICE, 16)));
dev->clkm_conf.clkm_div_b = 0; // Clock numerator
dev->clkm_conf.clkm_div_a = 1; // Clock denominator
#if defined (CONFIG_IDF_TARGET_ESP32S2)
dev->clkm_conf.clk_sel = 2; // I2S_CLK_SEL Set this bit to select I2S module clock source. 0: No clock. 1: APLL_CLK. 2: PLL_160M_CLK. 3: No clock. (R/W)
dev->clkm_conf.clk_en = 1;
dev->clkm_conf.clkm_div_num = _div_num;
#endif
// Must be ESP32 original
#if !defined (CONFIG_IDF_TARGET_ESP32S2)
dev->clkm_conf.clka_en=0; // Use the 80mhz system clock (PLL_D2_CLK) when '0'
dev->clkm_conf.clkm_div_num = 3; // Hard code to 3 whatever frequency this is. 26Mhz?
#endif
/*
#if defined (CONFIG_IDF_TARGET_ESP32S2)
dev->clkm_conf.clk_sel = 2; // esp32-s2 only
dev->clkm_conf.clk_en = 1;
#endif
#if !defined (CONFIG_IDF_TARGET_ESP32S2)
dev->clkm_conf.clka_en=0; // Use the 80mhz system clock (PLL_D2_CLK) when '0'
#endif
dev->clkm_conf.clkm_div_b=0; // Clock numerator
dev->clkm_conf.clkm_div_a=1; // Clock denominator
// Note: clkm_div_num must only be set here AFTER clkm_div_b, clkm_div_a, etc. Or weird things happen!
// On original ESP32, max I2S DMA parallel speed is 20Mhz.
dev->clkm_conf.clkm_div_num = 2;
*/
//dev->clkm_conf.val = _clkdiv_write;
// Setup i2s clock
dev->sample_rate_conf.val = 0;
@ -278,8 +315,9 @@ static void IRAM_ATTR irq_hndlr(void* arg) { // if we use I2S1 (default)
dev->sample_rate_conf.tx_bits_mod = bus_width;
// Serial clock
dev->sample_rate_conf.rx_bck_div_num = 1;
dev->sample_rate_conf.tx_bck_div_num = 1;
// ESP32 and ESP32-S2 TRM clearly say that "Note that I2S_TX_BCK_DIV_NUM[5:0] must not be configured as 1."
dev->sample_rate_conf.rx_bck_div_num = 2;
dev->sample_rate_conf.tx_bck_div_num = 2;
////////////////////////////// END CLOCK CONFIGURATION /////////////////////////////////