remove matrix_rows_in_parallel from config

This commit is contained in:
Lukas 2023-03-11 12:56:43 +01:00
parent f970b781b9
commit e807e622a8

View file

@ -59,12 +59,12 @@
/***************************************************************************************/
/* Do not change definitions below unless you pretty sure you know what you are doing! */
// RGB Panel Constants / Calculated Values
// keeping a check sine it was possibe to set it previously
#ifdef MATRIX_ROWS_IN_PARALLEL
#define MATRIX_ROWS_IN_PARALLEL_DEFAULT MATRIX_ROWS_IN_PARALLEL
#else
#define MATRIX_ROWS_IN_PARALLEL_DEFAULT 2
#pragma message "You are not supposed to set MATRIX_ROWS_IN_PARALLEL. Setting it back to default."
#undef MATRIX_ROWS_IN_PARALLEL
#endif
#define MATRIX_ROWS_IN_PARALLEL 2
// 8bit per RGB color = 24 bit/per pixel,
// can be extended to offer deeper colors, or
@ -265,10 +265,6 @@ struct HUB75_I2S_CFG {
// How many clock cycles to blank OE before/after LAT signal change, default is 1 clock
uint8_t latch_blanking;
// ROWS of each Panel which are controlled at the same time, usually 2, sometimes 4, (8 also possible)
// this is hardware property of your panel(s)
uint8_t matrix_rows_in_parallel;
// use DMA double buffer (twice as much RAM required)
bool double_buff;
@ -304,8 +300,7 @@ struct HUB75_I2S_CFG {
uint8_t _latblk = DEFAULT_LAT_BLANKING, // Anything > 1 seems to cause artefacts on ICS panels
bool _clockphase = true,
uint16_t _min_refresh_rate = 60,
uint8_t _pixel_color_depth_bits = PIXEL_COLOR_DEPTH_BITS_DEFAULT,
uint8_t _matrix_rows_in_parallel = MATRIX_ROWS_IN_PARALLEL_DEFAULT
uint8_t _pixel_color_depth_bits = PIXEL_COLOR_DEPTH_BITS_DEFAULT
) : mx_width(_w),
mx_height(_h),
chain_length(_chain),
@ -315,8 +310,7 @@ struct HUB75_I2S_CFG {
double_buff(_dbuff),
latch_blanking(_latblk),
clkphase(_clockphase),
min_refresh_rate(_min_refresh_rate),
matrix_rows_in_parallel(_matrix_rows_in_parallel)
min_refresh_rate(_min_refresh_rate)
{
setPixelColorDepthBits(_pixel_color_depth_bits);
}
@ -680,7 +674,7 @@ class MatrixPanel_I2S_DMA {
m_cfg = cfg;
PIXELS_PER_ROW = m_cfg.mx_width * m_cfg.chain_length;
ROWS_PER_FRAME = m_cfg.mx_height / m_cfg.matrix_rows_in_parallel;
ROWS_PER_FRAME = m_cfg.mx_height / MATRIX_ROWS_IN_PARALLEL;
MASK_OFFSET = 16 - m_cfg.getPixelColorDepthBits();
config_set = true;
@ -864,7 +858,7 @@ class MatrixPanel_I2S_DMA {
* So now they could be changed, but shouldn't. Maybe put a cpp lock around it, so it can't be changed after initialisation
*/
uint16_t PIXELS_PER_ROW = m_cfg.mx_width * m_cfg.chain_length; // number of pixels in a single row of all chained matrix modules (WIDTH of a combined matrix chain)
uint8_t ROWS_PER_FRAME = m_cfg.mx_height / m_cfg.matrix_rows_in_parallel; // RPF - rows per frame, either 16 or 32 depending on matrix module
uint8_t ROWS_PER_FRAME = m_cfg.mx_height / MATRIX_ROWS_IN_PARALLEL; // RPF - rows per frame, either 16 or 32 depending on matrix module
uint8_t MASK_OFFSET = 16 - m_cfg.getPixelColorDepthBits();
// Other private variables
bool initialized = false;