From ed2c2ed5b88b22bda21ff7b9aef2d159540e994e Mon Sep 17 00:00:00 2001
From: mrfaptastic <12006953+mrfaptastic@users.noreply.github.com>
Date: Mon, 8 Mar 2021 18:51:16 +0000
Subject: [PATCH] Update README.md

---
 README.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/README.md b/README.md
index 4df18c1..a7bfa66 100644
--- a/README.md
+++ b/README.md
@@ -186,7 +186,7 @@ matrix.setLatBlanking(2);
 ```
 
 ## Power, Power and Power!
-Having a good power supply is CRITICAL, and it is highly recommended, for chains of LED Panels to have a 2000uf capacitor soldered to the back of each LED Panel across the [GND and VCC pins](https://github.com/mrfaptastic/ESP32-HUB75-MatrixPanel-I2S-DMA/issues/39#issuecomment-720780463), otherwise you WILL run into issues with 'flashy' graphics whereby a large amount of LEDs are turned on and off in succession (due to current/power draw peaks and troughs).
+Having a good power supply is CRITICAL, and it is highly recommended, for chains of LED Panels to have a 1000-2000uf capacitor soldered to the back of each LED Panel across the [GND and VCC pins](https://github.com/mrfaptastic/ESP32-HUB75-MatrixPanel-I2S-DMA/issues/39#issuecomment-720780463), otherwise you WILL run into issues with 'flashy' graphics whereby a large amount of LEDs are turned on and off in succession (due to current/power draw peaks and troughs).
 
  - Refer to this guide written for the [rpi-rgb-led-matrix library](https://github.com/hzeller/rpi-rgb-led-matrix/blob/master/wiring.md#a-word-about-power) for an explanation.
 - Refer to this [example](https://github.com/mrfaptastic/ESP32-HUB75-MatrixPanel-I2S-DMA/issues/39#issuecomment-722691127) issue of what can go wrong with a poor power supply.