diff --git a/examples/ChainedPanels/README.md b/examples/ChainedPanels/README.md
index b81d395..01fed7b 100644
--- a/examples/ChainedPanels/README.md
+++ b/examples/ChainedPanels/README.md
@@ -1,54 +1,54 @@
-    ## Chained Panels example - Chaining individual LED matrix panels to make a larger panel ##
+## Chained Panels example - Chaining individual LED matrix panels to make a larger panel ##
 
-    This is the PatternPlasma Demo adopted for use with multiple
-    displays arranged in a non standard order
+This is the PatternPlasma Demo adopted for use with multiple
+displays arranged in a non standard order
 
-    ### What is a non standard order? ###
-    
-    When you connect multiple panels together, the library treats the
-    multiple panels as one big panel arranged horizontally. Arranging
-    the displays like this would be a standard order.
+### What is a non standard order? ###
 
-    [ 4 ][ 3 ][ 2 ][ 1 ]  (ESP32 is connected to 1)
+When you connect multiple panels together, the library treats the
+multiple panels as one big panel arranged horizontally. Arranging
+the displays like this would be a standard order.
 
-    If you wanted to arrange the displays vertically, or in rows and 
-    columns this example might be able to help.
+[ 4 ][ 3 ][ 2 ][ 1 ]  (ESP32 is connected to 1)
 
-    [ 4 ][ 3 ]
-    [ 2 ][ 1 ]
+If you wanted to arrange the displays vertically, or in rows and 
+columns this example might be able to help.
 
-    It creates a virtual screen that you draw to in the same way you would
-    the matrix, but it will look after mapping it back to the displays.
+[ 4 ][ 3 ]
+[ 2 ][ 1 ]
+
+It creates a virtual screen that you draw to in the same way you would
+the matrix, but it will look after mapping it back to the displays.
 
 ### Steps to Use ###
 
-    1) In ESP32-RGB64x32MatrixPanel-I2S-DMA.h:
+1) In ESP32-RGB64x32MatrixPanel-I2S-DMA.h:
 
-    - Set the MATRIX_HEIGHT to be the y resolution of the physical chained panels in a line (if the panels are 32 x 16, set it to be 16)
-    - Set the MATRIX_WIDTH to be the sum of the x resolution of all the physical chained panels (i.e. If you have 4 x (32px w x 16px h) panels, 32x4 = 128) 
+- Set the MATRIX_HEIGHT to be the y resolution of the physical chained panels in a line (if the panels are 32 x 16, set it to be 16)
+- Set the MATRIX_WIDTH to be the sum of the x resolution of all the physical chained panels (i.e. If you have 4 x (32px w x 16px h) panels, 32x4 = 128) 
 
-    2) In the sketch:
-    
-    - Set values for NUM_ROWS, NUM_COLS, PANEL_RES_X, PANEL_RES_Y. There are comments beside them
-    explaining what they are in more detail.
-    - Other than where the matrix is defined and matrix.begin in the setup, you should now be using the virtual display
-    for everything (drawing pixels, writing text etc). You can do a find and replace of all calls if it's an existing sketch
-    (just make sure you don't replace the definition and the matrix.begin)
-    - If the sketch makes use of MATRIX_HEIGHT or MATRIX_WIDTH, these will need to be replaced with the width and height
-    of your virtual screen. Either make new defines and use that, or you can use virtualDisp.width() or .height()
+2) In the sketch:
+
+- Set values for NUM_ROWS, NUM_COLS, PANEL_RES_X, PANEL_RES_Y. There are comments beside them
+explaining what they are in more detail.
+- Other than where the matrix is defined and matrix.begin in the setup, you should now be using the virtual display
+for everything (drawing pixels, writing text etc). You can do a find and replace of all calls if it's an existing sketch
+(just make sure you don't replace the definition and the matrix.begin)
+- If the sketch makes use of MATRIX_HEIGHT or MATRIX_WIDTH, these will need to be replaced with the width and height
+of your virtual screen. Either make new defines and use that, or you can use virtualDisp.width() or .height()
 
 #### Contributor ####
-    Written by Brian Lough
-    YouTube: https://www.youtube.com/brianlough
-    Tindie: https://www.tindie.com/stores/brianlough/
-    Twitter: https://twitter.com/witnessmenow
+Written by Brian Lough
+YouTube: https://www.youtube.com/brianlough
+Tindie: https://www.tindie.com/stores/brianlough/
+Twitter: https://twitter.com/witnessmenow
 
-    Parts:
-    ESP32 D1 Mini * - https://s.click.aliexpress.com/e/_dSi824B
-    ESP32 I2S Matrix Shield (From my Tindie) = https://www.tindie.com/products/brianlough/esp32-i2s-matrix-shield/
+Parts:
+ESP32 D1 Mini * - https://s.click.aliexpress.com/e/_dSi824B
+ESP32 I2S Matrix Shield (From my Tindie) = https://www.tindie.com/products/brianlough/esp32-i2s-matrix-shield/
 
- *  * = Affilate
+*  * = Affilate
 
-    If you find what I do useful and would like to support me,
-    please consider becoming a sponsor on Github
-    https://github.com/sponsors/witnessmenow/
+If you find what I do useful and would like to support me,
+please consider becoming a sponsor on Github
+https://github.com/sponsors/witnessmenow/