ESP32-HUB75-MatrixPanel-DMA/examples/ChainedPanelsAuroraDemo/ChainedPanelsAuroraDemo.ino

181 lines
5.2 KiB
C++

/* ------------------------- CUSTOM GPIO PIN MAPPING ------------------------- */
// Kosso's ESP32 Matrix PCB pins
#define R1_PIN 2
#define G1_PIN 15
#define B1_PIN 4
#define R2_PIN 16
#define G2_PIN 13
#define B2_PIN 17
#define A_PIN 5
#define B_PIN 18
#define C_PIN 19
#define D_PIN 27
#define E_PIN -1
#define LAT_PIN 21
#define OE_PIN 23
#define CLK_PIN 22
/* -------------------------- Display Config Initialisation -------------------- */
#define MATRIX_WIDTH 128 // Overall matrix dimensions if laid out end-to-end.
#define MATRIX_HEIGHT 32
#define PANEL_RES_X 64 // Number of pixels wide of each INDIVIDUAL panel module.
#define PANEL_RES_Y 32 // Number of pixels tall of each INDIVIDUAL panel module.
#define NUM_ROWS 2 // Number of rows of chained INDIVIDUAL PANELS
#define NUM_COLS 1 // Number of INDIVIDUAL PANELS per ROW
// Virtual Panl dimensions
#define VPANEL_W 64 // Kosso: All Pattern files have had the MATRIX_WIDTH and MATRIX_HEIGHT replaced by these.
#define VPANEL_H 64 //
// Kosso added: Button with debounce
#define BTN_PIN 0 // Pattern advance. Using EPS32 Boot button.
int buttonState; // the current reading from the input pin
int lastButtonState = LOW; // the previous reading from the input pin
unsigned long lastDebounceTime = 0; // the last time the output pin was toggled
unsigned long debounceDelay = 50; // the debounce time; increase if the output flickers
// The palettes are set to change every 60 seconds.
// Kosso added: Non-volatile memory to save last pattern index.
#include <Preferences.h>
Preferences preferences;
int lastPattern = 0;
/* -------------------------- Class Initialisation -------------------------- */
//#include <ESP32-RGB64x32MatrixPanel-I2S-DMA.h>
//RGB64x32MatrixPanel_I2S_DMA matrix;
#include <ESP32-VirtualMatrixPanel-I2S-DMA.h>
RGB64x32MatrixPanel_I2S_DMA matrix;
// Added support for 'Chained' virtual panel configurations.
VirtualMatrixPanel virtualDisp(matrix, NUM_ROWS, NUM_COLS, PANEL_RES_X, PANEL_RES_Y, true);
#include <FastLED.h> // Used for some mathematics calculations and effects.
#include "Effects.h"
Effects effects;
#include "Drawable.h"
#include "Playlist.h"
//#include "Geometry.h"
#include "Patterns.h"
Patterns patterns;
/* -------------------------- Some variables -------------------------- */
unsigned long ms_current = 0;
unsigned long ms_previous = 0;
unsigned long ms_animation_max_duration = 60000; // 10 seconds
unsigned long next_frame = 0;
void setup()
{
// Setup serial interface
Serial.begin(115200);
delay(250);
// Added a button to manually advance the pattern index.
pinMode(BTN_PIN, INPUT);
// For saving last pattern index. TO reboot with same.
preferences.begin("RGBMATRIX", false);
lastPattern = preferences.getInt("lastPattern", 0);
matrix.setPanelBrightness(30);
matrix.setMinRefreshRate(200);
matrix.begin(R1_PIN, G1_PIN, B1_PIN, R2_PIN, G2_PIN, B2_PIN, A_PIN, B_PIN, C_PIN, D_PIN, E_PIN, LAT_PIN, OE_PIN, CLK_PIN ); // setup the LED matrix
virtualDisp.fillScreen(virtualDisp.color444(0, 0, 0));
Serial.println("**************** Starting Aurora Effects Demo ****************");
Serial.println("MATRIX_WIDTH " + String(MATRIX_WIDTH));
Serial.println("MATRIX_HEIGHT " + String(MATRIX_HEIGHT));
#ifdef VPANEL_W
Serial.println("VIRTUAL PANEL WIDTH " + String(VPANEL_W));
Serial.println("VIRTUAL PANEL HEIGHT " + String(VPANEL_H));
#endif
// setup the effects generator
effects.Setup();
delay(500);
Serial.println("Effects being loaded: ");
listPatterns();
Serial.println("LastPattern index: " + String(lastPattern));
patterns.setPattern(lastPattern); // // simple noise
patterns.start();
Serial.print("Starting with pattern: ");
Serial.println(patterns.getCurrentPatternName());
preferences.end();
}
void patternAdvance(){
// Go to next pattern in the list (se Patterns.h)
patterns.stop();
patterns.move(1);
patterns.start();
// Select a random palette as well
effects.RandomPalette();
Serial.print("Changing pattern to: ");
Serial.println(patterns.getCurrentPatternName());
Serial.println(patterns.getPatternIndex());
lastPattern = patterns.getPatternIndex();
// Save last index.
preferences.begin("RGBMATRIX", false);
preferences.putInt("lastPattern", lastPattern);
preferences.end();
}
void loop()
{
// Boot button Pattern advance with debounce
int reading = digitalRead(BTN_PIN);
if (reading != lastButtonState) {
lastDebounceTime = millis();
}
if ((millis() - lastDebounceTime) > debounceDelay) {
if (reading != buttonState) {
buttonState = reading;
if (buttonState == LOW) {
Serial.println("NEXT PATTERN ...");
patternAdvance();
}
}
}
lastButtonState = reading;
// end button debounce
ms_current = millis();
if ( (ms_current - ms_previous) > ms_animation_max_duration )
{
// patternAdvance();
// just auto-change the palette
effects.RandomPalette();
ms_previous = ms_current;
}
if ( next_frame < ms_current)
next_frame = patterns.drawFrame() + ms_current;
}
void listPatterns() {
patterns.listPatterns();
}