ESP32-HUB75-MatrixPanel-DMA/examples/AuroraDemo/AuroraDemo.ino
mrfaptastic 3cea4eb14f Update examples
Remove #DEFINE MATRIX_WIDTH and #DEFINE MATRIX_HEIGHT from examples as this does NOT work.

Arduino compiles do not respect #defines in the .ino file within the library.
2021-01-10 17:32:24 +00:00

124 lines
3.5 KiB
C++

/* ------------------------- CUSTOM GPIO PIN MAPPING ------------------------- */
#define R1_PIN 18
#define G1_PIN 25
#define B1_PIN 5
#define R2_PIN 17
#define G2_PIN 26
#define B2_PIN 16
#define A_PIN 14
#define B_PIN 27
#define C_PIN 12
#define D_PIN 4
#define E_PIN -1
#define LAT_PIN 13
#define OE_PIN 15
#define CLK_PIN 2
/* -------------------------- Display Config Initialisation -------------------- */
// MATRIX_WIDTH and MATRIX_HEIGHT *must* be changed in ESP32-HUB75-MatrixPanel-I2S-DMA.h
// If you are using Platform IO (you should), pass MATRIX_WIDTH and MATRIX_HEIGHT as a compile time option.
// Refer to: https://github.com/mrfaptastic/ESP32-HUB75-MatrixPanel-I2S-DMA/issues/48#issuecomment-749402379
/* -------------------------- Class Initialisation -------------------------- */
#include <ESP32-HUB75-MatrixPanel-I2S-DMA.h>
MatrixPanel_I2S_DMA matrix;
#include <FastLED.h>
#include "Effects.h"
Effects effects;
#include "Drawable.h"
#include "Playlist.h"
//#include "Geometry.h"
#include "Patterns.h"
Patterns patterns;
/* -------------------------- Some variables -------------------------- */
unsigned long fps = 0, fps_timer; // fps (this is NOT a matix refresh rate!)
unsigned int default_fps = 30, pattern_fps = 30; // default fps limit (this is not a matix refresh conuter!)
unsigned long ms_animation_max_duration = 20000; // 20 seconds
unsigned long last_frame=0, ms_previous=0;
void setup()
{
// Setup serial interface
Serial.begin(115200);
delay(250);
matrix.begin(R1_PIN, G1_PIN, B1_PIN, R2_PIN, G2_PIN, B2_PIN, A_PIN, B_PIN, C_PIN, D_PIN, E_PIN, LAT_PIN, OE_PIN, CLK_PIN ); // setup the LED matrix
/**
* this demos runs pretty fine in fast-mode which gives much better fps on large matrixes (>128x64)
* see comments in the lib header on what does that means
*/
//dma_display.setFastMode(true);
// SETS THE BRIGHTNESS HERE. MAX value is MATRIX_WIDTH, 2/3 OR LOWER IDEAL, default is about 50%
// dma_display.setPanelBrightness(30);
/* another way to change brightness is to use
* dma_display.setPanelBrightness8(uint8_t brt); // were brt is within range 0-255
* it will recalculate to consider matrix width automatically
*/
//dma_display.setPanelBrightness8(180);
Serial.println("**************** Starting Aurora Effects Demo ****************");
// setup the effects generator
effects.Setup();
delay(500);
Serial.println("Effects being loaded: ");
listPatterns();
patterns.moveRandom(1); // start from a random pattern
Serial.print("Starting with pattern: ");
Serial.println(patterns.getCurrentPatternName());
patterns.start();
ms_previous = millis();
fps_timer = millis();
}
void loop()
{
// menu.run(mainMenuItems, mainMenuItemCount);
if ( (millis() - ms_previous) > ms_animation_max_duration )
{
patterns.stop();
patterns.moveRandom(1);
//patterns.move(1);
patterns.start();
Serial.print("Changing pattern to: ");
Serial.println(patterns.getCurrentPatternName());
ms_previous = millis();
// Select a random palette as well
//effects.RandomPalette();
}
if ( 1000 / pattern_fps + last_frame < millis()){
last_frame = millis();
pattern_fps = patterns.drawFrame();
if (!pattern_fps)
pattern_fps = default_fps;
++fps;
}
if (fps_timer + 1000 < millis()){
Serial.printf_P(PSTR("Effect fps: %ld\n"), fps);
fps_timer = millis();
fps = 0;
}
}
void listPatterns() {
patterns.listPatterns();
}