Find a file
2020-12-05 19:15:04 +00:00
examples some more fixes for Aurora effects 2020-12-02 22:39:03 +03:00
ESP32-HUB75-MatrixPanel-I2S-DMA.cpp Update library class and name 2020-11-28 09:45:30 +00:00
ESP32-HUB75-MatrixPanel-I2S-DMA.h Update library class and name 2020-11-28 09:45:30 +00:00
ESP32-RGB64x32MatrixPanel-I2S-DMA.h Backwards compatability include 2020-11-28 10:03:17 +00:00
ESP32-VirtualMatrixPanel-I2S-DMA.h Update library class and name 2020-11-28 09:45:30 +00:00
esp32_i2s_parallel.c Improvement to ensure DMA payload limit not hit. 2020-08-02 22:03:16 +01:00
esp32_i2s_parallel.h Improvement to ensure DMA payload limit not hit. 2020-08-02 22:03:16 +01:00
framebuffer_memory.md Change library name 2020-11-28 08:39:35 +00:00
image.jpg Fix examples for new version 2020-07-29 23:29:42 +01:00
keywords.txt Update library class and name 2020-11-28 09:45:30 +00:00
Layer.cpp Layer Class 2020-12-05 19:14:32 +00:00
Layer.h Layer Class 2020-12-05 19:14:32 +00:00
library.json Change library name 2020-11-28 08:39:35 +00:00
library.properties Change library name 2020-11-28 08:39:35 +00:00
LICENSE.txt Update LICENSE.txt 2018-10-23 01:14:40 +01:00
README.md Update library class and name 2020-11-28 09:45:30 +00:00
WiringExample.jpg Updated images 2019-01-03 00:42:16 +00:00

HUB75 LED matrix library for the ESP32, utilising DMA

This ESP32 Arduino library for HUB75 / HUB75E connector type 64x32 RGB LED 1/16 Scan OR 64x64 RGB LED 1/32 Scan LED Matrix Panel, utilises the DMA functionality provided by the ESP32's I2S 'LCD Mode' which basically means that pixel data is sent straight from memory, via the DMA controller, to the relevant LED Matrix GPIO pins with little CPU overhead.

As a result, this library can theoretically provide ~16-24 bit colour, at various brightness levels without noticeable flicker.

Panels Supported

Panels Not Supported

  • 1/8 Scan LED Matrix Panels are not supported, please use an alternative library if you bought one of these.
  • Panels with a resolution of less than 64x32pixels and/or scan rate != 1/32 or 1/16

Installation

  • Dependency: You will need to install Adafruit_GFX from the "Library > Manage Libraries" menu.
  • Download and unzip this repository into your Arduino/libraries folder (or better still, use the Arduino 'add library from .zip' option.
  • Library also tested to work fine with PlatformIO, install into your PlatformIO projects' lib/ folder as appropriate.

Wiring ESP32 with the LED Matrix Panel

By default the pin mapping is as follows (defaults defined in ESP32-HUB75-MatrixPanel-I2S-DMA.h).

 HUB 75 PANEL              ESP 32 PIN
+-----------+   
|  R1   G1  |    R1  -> IO25      G1  -> IO26
|  B1   GND |    B1  -> IO27
|  R2   G2  |    R2  -> IO14      G2  -> IO12
|  B2   GND |    B2  -> IO13
|   A   B   |    A   -> IO23      B   -> IO19
|   C   D   |    C   -> IO 5      D   -> IO17
| CLK   LAT |    CLK -> IO16      LAT -> IO 4
|  OE   GND |    OE  -> IO15      GND -> ESP32 GND
+-----------+

However, if you want to change this, simply provide the wanted pin mapping as part of the display.begin() call. For example, in your sketch have something like the following:

// Change these to whatever suits
#define R1_PIN  25
#define G1_PIN  26
#define B1_PIN  27
#define R2_PIN  14
#define G2_PIN  12
#define B2_PIN  13

#define A_PIN   23
#define B_PIN   22 
#define C_PIN   5
#define D_PIN   17
#define E_PIN   -1
          
#define LAT_PIN 4
#define OE_PIN  15

#define CLK_PIN 16


display.begin(R1_PIN, G1_PIN, B1_PIN, R2_PIN, G2_PIN, B2_PIN, A_PIN, B_PIN, C_PIN, D_PIN, E_PIN, LAT_PIN, OE_PIN, CLK_PIN );  // setup the LED matrix

The panel must be powered by 5V AC adapter with enough current capacity. (Current varies due to how many LED are turned on at the same time. To drive all the LEDs, you need 5V4A adapter.)

How to Use

Below is a bare minimum sketch to draw a single white dot in the top left. You must call .begin() before you call ANY pixel-drawing (fonts, lines, colours etc.) function of the MatrixPanel_I2S_DMA class.

No .begin() before other functions = Crash

#include <ESP32-HUB75-MatrixPanel-I2S-DMA.h>
MatrixPanel_I2S_DMA matrix;

void setup()
{ 
  // MUST DO THIS FIRST!
  matrix.begin();  // Use default pins supplied within ESP32-HUB75-MatrixPanel-I2S-DMA.h
  // matrix.begin(R1_PIN, G1_PIN, B1_PIN, R2_PIN, G2_PIN, B2_PIN, A_PIN, B_PIN, C_PIN, D_PIN, E_PIN, LAT_PIN, OE_PIN, CLK_PIN );  // or custom pins

  // Draw a single white pixel
  matrix.drawPixel(0,0, matrix.color565(255,255,255)); // can do this after .begin() only
  
}

void loop()
{ }

Can I use with a larger panel (i.e. 64x64px square panel)?

If you want to use with a 64x64 pixel panel (typically a HUB75E panel) you MUST configure a valid E_PIN to your ESP32 and connect it to the E pin of the HUB75 panel! Hence the 'E' in 'HUB75E'

Can I chain panels?

Yes. If you want to chain two of these horizontally to make a 128x32 panel you can easily by setting the MATRIX_WIDTH to '128' and connecting the panels in series using the HUB75 ribbon cable.

Similarly, if you wanted to chain 4 panels to make a 256x32 px horizontal panel, you can easily by setting the MATRIX_WIDTH to '256' and connecting the panels in series using the HUB75 ribbon cable.

Finally, if you wanted to chain 4 x (64x32px) panels to make 128x64px display (essentially a 2x2 grid of 64x32 LED Matrix modules), a little more magic will be required. Refer to the Chained Panels example.

Resolutions beyond 128x128 are likely to result in crashes due to memory constraints etc. You're on your own at this point.

ezgif com-video-to-gif

Panel Brightness

By default you should not need to change / set the brightness setting as the default value (16) is sufficent for most purposes. Brightness can be changed by calling setPanelBrightness(XX) and then clearScreen().

The value to pass 'setPanelBrightness' must be a value less than MATRIX_WIDTH. For example for a single 64x32 LED Matrix Module, a value less than 64. However, if you set the brightness too high, you may experience ghosting.

Example:

void setup() {
    Serial.begin(115200);
    matrix.begin(R1_PIN, G1_PIN, B1_PIN, R2_PIN, G2_PIN, B2_PIN, A_PIN, B_PIN, C_PIN, D_PIN, E_PIN, LAT_PIN, OE_PIN, CLK_PIN );  // setup the LED matrix
    matrix.setPanelBrightness(16); // Set the brightness. 32 or lower ideal for a single 64x32 LED Matrix Panel.
    matrix.clearScreen(); // You must clear the screen after changing brightness level for it to take effect.

}

Summary: setPanelBrightness(xx) value can be any number from 0 (display off) to MATRIX_WIDTH-1. So if you are chaining multiple 64x32 panels, then this value may actually be > 64 (or you will have a dim display). Changing the brightness will have a huge impact on power usage.

It's better in real life

Power, Power and Power!

Having a good power supply is CRITICAL, and it is highly recommended, for chains of LED Panels to have a 2000uf capacitor soldered to the back of each LED Panel across the GND and VCC pins, otherwise you WILL run into issues with 'flashy' graphics whereby a large amount of LEDs are turned on and off in succession (due to current/power draw peaks and troughs).

Refer to this guide written for the rpi-rgb-led-matrix library for an explanation.

  • Refer to this example issue of what can go wrong with a poor powersupply.
  • Refer to this comment in regards to certain panels not playing nice with voltages, and a 3.3volt signal that the ESP32 GPIO can only provide.

Inspiration