diff --git a/docs/Command_line_config.md b/docs/Command_line_config.md
index c22565f..796eb1c 100644
--- a/docs/Command_line_config.md
+++ b/docs/Command_line_config.md
@@ -24,6 +24,13 @@ If defined, enables debug log messages from the NimBLE host
 - Uses approx. 32kB of flash memory.  
 <br/>
 
+`CONFIG_NIMBLE_CPP_LOG_LEVEL`   
+
+Define to set the debug log message level from the NimBLE CPP Wrapper.  
+If not defined it will use the same value as the Arduino core debug level.  
+Values: 0 = NONE, 1 = ERROR, 2 = WARNING, 3 = INFO, 4+ = DEBUG  
+<br/>
+
 `CONFIG_NIMBLE_CPP_ENABLE_RETURN_CODE_TEXT`  
 
 If defined, NimBLE host return codes will be printed as text in debug log messages.  
diff --git a/docs/Doxyfile b/docs/Doxyfile
index 34d13cc..1d9a18b 100644
--- a/docs/Doxyfile
+++ b/docs/Doxyfile
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.18
+# Doxyfile 1.9.1
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -32,13 +32,13 @@ DOXYFILE_ENCODING      = UTF-8
 # title of most generated pages and in a few other places.
 # The default value is: My Project.
 
-PROJECT_NAME           = "esp-nimble-cpp / NimBLE-Arduino"
+PROJECT_NAME           = esp-nimble-cpp
 
 # The PROJECT_NUMBER tag can be used to enter a project or revision number. This
 # could be handy for archiving the generated documentation or if some version
 # control system is used.
 
-PROJECT_NUMBER         = 1.3.1
+PROJECT_NUMBER         = 1.3.2
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer a
@@ -58,7 +58,7 @@ PROJECT_LOGO           =
 # entered, it will be relative to the location where doxygen was started. If
 # left blank the current directory will be used.
 
-OUTPUT_DIRECTORY       = docs
+OUTPUT_DIRECTORY       = .
 
 # If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
 # directories (in 2 levels) under the output directory of each output format and
@@ -227,6 +227,14 @@ QT_AUTOBRIEF           = NO
 
 MULTILINE_CPP_IS_BRIEF = NO
 
+# By default Python docstrings are displayed as preformatted text and doxygen's
+# special commands cannot be used. By setting PYTHON_DOCSTRING to NO the
+# doxygen's special commands can be used and the contents of the docstring
+# documentation blocks is shown as doxygen documentation.
+# The default value is: YES.
+
+PYTHON_DOCSTRING       = YES
+
 # If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
 # documentation from any documented member that it re-implements.
 # The default value is: YES.
@@ -315,7 +323,10 @@ OPTIMIZE_OUTPUT_SLICE  = NO
 # Note: For files without extension you can use no_extension as a placeholder.
 #
 # Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
+# the files are not read by doxygen. When specifying no_extension you should add
+# * to the FILE_PATTERNS.
+#
+# Note see also the list of default file extension mappings.
 
 EXTENSION_MAPPING      =
 
@@ -449,6 +460,19 @@ TYPEDEF_HIDES_STRUCT   = NO
 
 LOOKUP_CACHE_SIZE      = 0
 
+# The NUM_PROC_THREADS specifies the number threads doxygen is allowed to use
+# during processing. When set to 0 doxygen will based this on the number of
+# cores available in the system. You can set it explicitly to a value larger
+# than 0 to get more control over the balance between CPU load and processing
+# speed. At this moment only the input processing can be done using multiple
+# threads. Since this is still an experimental feature the default is set to 1,
+# which efficively disables parallel processing. Please report any issues you
+# encounter. Generating dot graphs in parallel is controlled by the
+# DOT_NUM_THREADS setting.
+# Minimum value: 0, maximum value: 32, default value: 1.
+
+NUM_PROC_THREADS       = 1
+
 #---------------------------------------------------------------------------
 # Build related configuration options
 #---------------------------------------------------------------------------
@@ -512,6 +536,13 @@ EXTRACT_LOCAL_METHODS  = NO
 
 EXTRACT_ANON_NSPACES   = NO
 
+# If this flag is set to YES, the name of an unnamed parameter in a declaration
+# will be determined by the corresponding definition. By default unnamed
+# parameters remain unnamed in the output.
+# The default value is: YES.
+
+RESOLVE_UNNAMED_PARAMS = YES
+
 # If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
 # undocumented members inside documented classes or files. If set to NO these
 # members will be included in the various overviews, but no documentation
@@ -549,11 +580,18 @@ HIDE_IN_BODY_DOCS      = YES
 
 INTERNAL_DOCS          = NO
 
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES, upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# (including Cygwin) ands Mac users are advised to set this option to NO.
+# With the correct setting of option CASE_SENSE_NAMES doxygen will better be
+# able to match the capabilities of the underlying filesystem. In case the
+# filesystem is case sensitive (i.e. it supports files in the same directory
+# whose names only differ in casing), the option must be set to YES to properly
+# deal with such files in case they appear in the input. For filesystems that
+# are not case sensitive the option should be be set to NO to properly deal with
+# output files written for symbols that only differ in casing, such as for two
+# classes, one named CLASS and the other named Class, and to also support
+# references to files without having to specify the exact matching casing. On
+# Windows (including Cygwin) and MacOS, users should typically set this option
+# to NO, whereas on Linux or other Unix flavors it should typically be set to
+# YES.
 # The default value is: system dependent.
 
 CASE_SENSE_NAMES       = NO
@@ -792,7 +830,10 @@ WARN_IF_DOC_ERROR      = YES
 WARN_NO_PARAMDOC       = NO
 
 # If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when
-# a warning is encountered.
+# a warning is encountered. If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS
+# then doxygen will continue running as if WARN_AS_ERROR tag is set to NO, but
+# at the end of the doxygen process doxygen will return with a non-zero status.
+# Possible values are: NO, YES and FAIL_ON_WARNINGS.
 # The default value is: NO.
 
 WARN_AS_ERROR          = NO
@@ -823,13 +864,15 @@ WARN_LOGFILE           =
 # spaces. See also FILE_PATTERNS and EXTENSION_MAPPING
 # Note: If this tag is empty the current directory is searched.
 
-INPUT                  = .
+INPUT                  = ../CHANGELOG.md \
+                         . \
+                         ../src
 
 # This tag can be used to specify the character encoding of the source files
 # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
 # libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: https://www.gnu.org/software/libiconv/) for the list of
-# possible encodings.
+# documentation (see:
+# https://www.gnu.org/software/libiconv/) for the list of possible encodings.
 # The default value is: UTF-8.
 
 INPUT_ENCODING         = UTF-8
@@ -842,13 +885,15 @@ INPUT_ENCODING         = UTF-8
 # need to set EXTENSION_MAPPING for the extension otherwise the files are not
 # read by doxygen.
 #
+# Note the list of default checked file patterns might differ from the list of
+# default file extension mappings.
+#
 # If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp,
 # *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h,
 # *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc,
 # *.m, *.markdown, *.md, *.mm, *.dox (to be provided as doxygen C comment),
-# *.doc (to be provided as doxygen C comment), *.txt (to be provided as doxygen
-# C comment), *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, *.f18, *.f, *.for, *.vhd,
-# *.vhdl, *.ucf, *.qsf and *.ice.
+# *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, *.f18, *.f, *.for, *.vhd, *.vhdl,
+# *.ucf, *.qsf and *.ice.
 
 FILE_PATTERNS          = *.c \
                          *.cc \
@@ -911,11 +956,7 @@ RECURSIVE              = YES
 # Note that relative paths are relative to the directory from which doxygen is
 # run.
 
-EXCLUDE                = ./README.md \
-                         ./src/FreeRTOS.h \
-                         ./src/FreeRTOS.cpp \
-                         ./examples \
-                         ./CMakelists.txt
+EXCLUDE                = ../src/nimconfig_rename.h
 
 # The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
 # directories that are symbolic links (a Unix file system feature) are excluded
@@ -1112,6 +1153,44 @@ USE_HTAGS              = NO
 
 VERBATIM_HEADERS       = YES
 
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see:
+# http://clang.llvm.org/) for more accurate parsing at the cost of reduced
+# performance. This can be particularly helpful with template rich C++ code for
+# which doxygen's built-in parser lacks the necessary type information.
+# Note: The availability of this option depends on whether or not doxygen was
+# generated with the -Duse_libclang=ON option for CMake.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled and the CLANG_ADD_INC_PATHS tag is set to
+# YES then doxygen will add the directory of each input to the include path.
+# The default value is: YES.
+
+CLANG_ADD_INC_PATHS    = YES
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+# If clang assisted parsing is enabled you can provide the clang parser with the
+# path to the directory containing a file called compile_commands.json. This
+# file is the compilation database (see:
+# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) containing the
+# options used when the source files were built. This is equivalent to
+# specifying the -p option to a clang tool, such as clang-check. These options
+# will then be passed to the parser. Any options specified with CLANG_OPTIONS
+# will be added as well.
+# Note: The availability of this option depends on whether or not doxygen was
+# generated with the -Duse_libclang=ON option for CMake.
+
+CLANG_DATABASE_PATH    =
+
 #---------------------------------------------------------------------------
 # Configuration options related to the alphabetical class index
 #---------------------------------------------------------------------------
@@ -1123,13 +1202,6 @@ VERBATIM_HEADERS       = YES
 
 ALPHABETICAL_INDEX     = YES
 
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
 # In case all classes in a project start with a common prefix, all classes will
 # be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
 # can be used to specify a prefix (or a list of prefixes) that should be ignored
@@ -1300,10 +1372,11 @@ HTML_INDEX_NUM_ENTRIES = 100
 
 # If the GENERATE_DOCSET tag is set to YES, additional index files will be
 # generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: https://developer.apple.com/xcode/), introduced with OSX
-# 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
+# environment (see:
+# https://developer.apple.com/xcode/), introduced with OSX 10.5 (Leopard). To
+# create a documentation set, doxygen will generate a Makefile in the HTML
+# output directory. Running make will produce the docset in that directory and
+# running make install will install the docset in
 # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
 # startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy
 # genXcode/_index.html for more information.
@@ -1345,8 +1418,8 @@ DOCSET_PUBLISHER_NAME  = Publisher
 # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
 # additional HTML index files: index.hhp, index.hhc, and index.hhk. The
 # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
+# (see:
+# https://www.microsoft.com/en-us/download/details.aspx?id=21138) on Windows.
 #
 # The HTML Help Workshop contains a compiler that can convert all HTML output
 # generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
@@ -1376,7 +1449,7 @@ CHM_FILE               =
 HHC_LOCATION           =
 
 # The GENERATE_CHI flag controls if a separate .chi index file is generated
-# (YES) or that it should be included in the master .chm file (NO).
+# (YES) or that it should be included in the main .chm file (NO).
 # The default value is: NO.
 # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
 
@@ -1421,7 +1494,8 @@ QCH_FILE               =
 
 # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
 # Project output. For more information please see Qt Help Project / Namespace
-# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace).
+# (see:
+# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace).
 # The default value is: org.doxygen.Project.
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
@@ -1429,8 +1503,8 @@ QHP_NAMESPACE          = org.doxygen.Project
 
 # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
 # Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual-
-# folders).
+# Folders (see:
+# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual-folders).
 # The default value is: doc.
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
@@ -1438,16 +1512,16 @@ QHP_VIRTUAL_FOLDER     = doc
 
 # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
 # filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-
-# filters).
+# Filters (see:
+# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHP_CUST_FILTER_NAME   =
 
 # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
 # custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-
-# filters).
+# Filters (see:
+# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHP_CUST_FILTER_ATTRS  =
@@ -1459,9 +1533,9 @@ QHP_CUST_FILTER_ATTRS  =
 
 QHP_SECT_FILTER_ATTRS  =
 
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
+# The QHG_LOCATION tag can be used to specify the location (absolute path
+# including file name) of Qt's qhelpgenerator. If non-empty doxygen will try to
+# run qhelpgenerator on the generated .qhp file.
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHG_LOCATION           =
@@ -1542,8 +1616,8 @@ EXT_LINKS_IN_WINDOW    = NO
 # tool (see https://github.com/dawbarton/pdf2svg) or inkscape (see
 # https://inkscape.org) to generate formulas as SVG images instead of PNGs for
 # the HTML output. These images will generally look nicer at scaled resolutions.
-# Possible values are: png The default and svg Looks nicer but requires the
-# pdf2svg tool.
+# Possible values are: png (the default) and svg (looks nicer but requires the
+# pdf2svg or inkscape tool).
 # The default value is: png.
 # This tag requires that the tag GENERATE_HTML is set to YES.
 
@@ -1588,7 +1662,7 @@ USE_MATHJAX            = NO
 
 # When MathJax is enabled you can set the default output format to be used for
 # the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
+# http://docs.mathjax.org/en/v2.7-latest/output.html) for more details.
 # Possible values are: HTML-CSS (which is slower, but has the best
 # compatibility), NativeMML (i.e. MathML) and SVG.
 # The default value is: HTML-CSS.
@@ -1618,7 +1692,8 @@ MATHJAX_EXTENSIONS     =
 
 # The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
 # of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# (see:
+# http://docs.mathjax.org/en/v2.7-latest/output.html) for more details. For an
 # example see the documentation.
 # This tag requires that the tag USE_MATHJAX is set to YES.
 
@@ -1665,7 +1740,8 @@ SERVER_BASED_SEARCH    = NO
 #
 # Doxygen ships with an example indexer (doxyindexer) and search engine
 # (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: https://xapian.org/).
+# Xapian (see:
+# https://xapian.org/).
 #
 # See the section "External Indexing and Searching" for details.
 # The default value is: NO.
@@ -1678,8 +1754,9 @@ EXTERNAL_SEARCH        = NO
 #
 # Doxygen ships with an example indexer (doxyindexer) and search engine
 # (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: https://xapian.org/). See the section "External Indexing and
-# Searching" for details.
+# Xapian (see:
+# https://xapian.org/). See the section "External Indexing and Searching" for
+# details.
 # This tag requires that the tag SEARCHENGINE is set to YES.
 
 SEARCHENGINE_URL       =
@@ -1843,9 +1920,11 @@ LATEX_EXTRA_FILES      =
 
 PDF_HYPERLINKS         = YES
 
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES, to get a
-# higher quality PDF documentation.
+# If the USE_PDFLATEX tag is set to YES, doxygen will use the engine as
+# specified with LATEX_CMD_NAME to generate the PDF file directly from the LaTeX
+# files. Set this option to YES, to get a higher quality PDF documentation.
+#
+# See also section LATEX_CMD_NAME for selecting the engine.
 # The default value is: YES.
 # This tag requires that the tag GENERATE_LATEX is set to YES.
 
@@ -2084,6 +2163,10 @@ DOCBOOK_PROGRAMLISTING = NO
 
 GENERATE_AUTOGEN_DEF   = NO
 
+#---------------------------------------------------------------------------
+# Configuration options related to Sqlite3 output
+#---------------------------------------------------------------------------
+
 #---------------------------------------------------------------------------
 # Configuration options related to the Perl module output
 #---------------------------------------------------------------------------
@@ -2361,10 +2444,32 @@ UML_LOOK               = NO
 # but if the number exceeds 15, the total amount of fields shown is limited to
 # 10.
 # Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
+# This tag requires that the tag UML_LOOK is set to YES.
 
 UML_LIMIT_NUM_FIELDS   = 10
 
+# If the DOT_UML_DETAILS tag is set to NO, doxygen will show attributes and
+# methods without types and arguments in the UML graphs. If the DOT_UML_DETAILS
+# tag is set to YES, doxygen will add type and arguments for attributes and
+# methods in the UML graphs. If the DOT_UML_DETAILS tag is set to NONE, doxygen
+# will not generate fields with class member information in the UML graphs. The
+# class diagrams will look similar to the default class diagrams but using UML
+# notation for the relationships.
+# Possible values are: NO, YES and NONE.
+# The default value is: NO.
+# This tag requires that the tag UML_LOOK is set to YES.
+
+DOT_UML_DETAILS        = NO
+
+# The DOT_WRAP_THRESHOLD tag can be used to set the maximum number of characters
+# to display on a single line. If the actual line length exceeds this threshold
+# significantly it will wrapped across multiple lines. Some heuristics are apply
+# to avoid ugly line breaks.
+# Minimum value: 0, maximum value: 1000, default value: 17.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_WRAP_THRESHOLD     = 17
+
 # If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
 # collaboration graphs will show the relations between templates and their
 # instances.
@@ -2554,9 +2659,11 @@ DOT_MULTI_TARGETS      = NO
 
 GENERATE_LEGEND        = YES
 
-# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate
 # files that are used to generate the various graphs.
+#
+# Note: This setting is not only used for dot files but also for msc and
+# plantuml temporary files.
 # The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
 
 DOT_CLEANUP            = YES
diff --git a/src/NimBLECharacteristic.cpp b/src/NimBLECharacteristic.cpp
index 60e708b..cb447d6 100644
--- a/src/NimBLECharacteristic.cpp
+++ b/src/NimBLECharacteristic.cpp
@@ -409,6 +409,7 @@ void NimBLECharacteristic::notify(bool is_notification) {
  * @brief Send a notification.\n
  * A notification is a transmission of up to the first 20 bytes of the characteristic value.\n
  * A notification will not block; it is a fire and forget.
+ * @param[in] value An optional value to send as the notification, else the current characteristic value is used.
  * @param[in] is_notification if true sends a notification, false sends an indication.
  */
 void NimBLECharacteristic::notify(std::string value, bool is_notification) {
diff --git a/src/NimBLEServer.cpp b/src/NimBLEServer.cpp
index 4e4ab7f..c7aeb64 100644
--- a/src/NimBLEServer.cpp
+++ b/src/NimBLEServer.cpp
@@ -75,9 +75,6 @@ NimBLEService* NimBLEServer::createService(const char* uuid) {
 /**
  * @brief Create a %BLE Service.
  * @param [in] uuid The UUID of the new service.
- * @param [in] numHandles The maximum number of handles associated with this service.
- * @param [in] inst_id if we have multiple services with the same UUID we need
- *             to provide inst_id value different for each service.
  * @return A reference to the new service object.
  */
 NimBLEService* NimBLEServer::createService(const NimBLEUUID &uuid) {