mirror of
https://github.com/h2zero/esp-nimble-cpp.git
synced 2024-11-23 13:40:55 +01:00
Update changelog
This commit is contained in:
h2zero
parent
32c213a8a3
commit
98011014e6
1 changed files with 85 additions and 46 deletions
131
CHANGELOG.md
131
CHANGELOG.md
|
|
@ -3,12 +3,51 @@
|
|||
All notable changes to this project will be documented in this file.
|
||||
## [Unreleased]
|
||||
|
||||
## Fixed
|
||||
- `NimBLEDevice::getPower` return value corrected to return `-3` when the power level is set to `ESP_PWR_LVL_N3`.
|
||||
- Fixed building with esp-idf version 5.x.
|
||||
- Fixed pairing failing when the process was started by the peer first.
|
||||
- `NimBLEService::getHandle` will now fetch the handle from the stack if not valid to avoid returning an invalid value.
|
||||
- Fixed building with esp-idf and Arduino component.
|
||||
- `NimBLEHIDDevice::pnp` will now set the data correctly.
|
||||
|
||||
### Changed
|
||||
- NimBLESecurity class removed.
|
||||
- All functions that take a time input parameter now expect the value to be in milliseconds instead of seconds.
|
||||
- `NimBLEClientCallbacks::onDisconnect` now takes an additional `int reason` parameter to let the application know why the disconnect occurred.
|
||||
- `NimBLERemoteCharacteristic::registerForNotify` Has been removed.
|
||||
- `NimBLERemoteCharacteristic::readUInt16` Has been removed.
|
||||
- `NimBLERemoteCharacteristic::readUInt32` Has been removed.
|
||||
- `NimBLERemoteCharacteristic::readUInt8` Has been removed.
|
||||
- `NimBLERemoteCharacteristic::readFloat` Has been removed.
|
||||
- `NimBLECharacteristicCallbacks::onStatus` No longer takes a `status` parameter, refer to the return code for success/failure.
|
||||
- All connection oriented callbacks now receive a reference to `NimBLEConnInfo`, the `ble_gap_conn_desc` has also been replace with `NimBLEConnInfo` in the functions that received it.
|
||||
- `NimBLEAdvertisedDeviceCallbacks` Has been replaced by `NimBLEScanCallbacks` which contains the following methods: `onResult`, `onScanEnd`, and `onDiscovered`
|
||||
- - `NimBLEScanCallbacks::onResult`, functions the same as the old `NimBLEAdvertisedDeviceCallbacks::onResult`
|
||||
- - `NimBLEScanCallbacks::onScanEnd`, replaces the scanEnded callback passed to `NimBLEScan::start`
|
||||
- - `NimBLEScanCallbacks::onDiscovered`, This is called immediately when a device is first scanned, before any scan response data is available.
|
||||
- The callback parameter for `NimBLEScan::start` has been removed and the blocking overload of `NimBLEScan::start` has been replaced by an overload of `NimBLEScan::getResults` with the same parameters.
|
||||
- Added optional `conn_handle` parameter to `NimBLECharacteristic::notify` to allow for sending notifications to specific clients.
|
||||
- Added optional `NimBLEAddress` parameter to `NimBLEAdvertising::start` to allow for directed advertising to a peer.
|
||||
- `NimBLEAdvertisedDevice::getManufacturerData` now takes an optional index parameter for use in the case of multiple manufacturer data fields.
|
||||
- `NimBLEAdvertising::start` advertising complete callback is now defined as std::function to allow for using std::bind for callback functions.
|
||||
- `NimBLEDevice::deleteAllBonds` now returns true on success, otherwise false.
|
||||
- `NimBLEClientCallbacks::onPassKeyRequest` has been changed to `NimBLEClientCallbacks::onPassKeyEntry` which takes a `const NimBLEConnInfo` parameter and does not return a value. Instead or returning a value this callback should prompt a user to enter a pin number which is sent later via `NimBLEDevice::injectPassKey`.
|
||||
- `NimBLEClientCallbacks::onConfirmPin` no longer returns a value and now takes a `const NimBLEConnInfo` parameter. This should be used to prompt a user to confirm the pin on the display (YES/NO) after which the response should be sent with `NimBLEDevice::injectConfirmPIN`.
|
||||
- `NimBLEServer::onPassKeyRequest` has been replaced with `NimBLEServer::onPassKeyDisplay` which should display the pairing pin that the client is expected to send.
|
||||
- `NimBLEServer::onAuthenticationComplete` now takes a `const NimBLEConnInfo` parameter.
|
||||
|
||||
### Added
|
||||
- `NimBLEDevice::setDeviceName` to change the device name after initialization.
|
||||
- `NimBLEHIDDevice::batteryLevel` returns the HID device battery level characteristic.
|
||||
- `NimBLEAdvertisedDevice::getAdvFlags` returns the advertisement flags of the advertiser.
|
||||
- `NimBLEAdvertisedDevice::getPayloadByType` Generic use function that returns the data from the advertisement with the specified type.
|
||||
- `NimBLEAdvertisedDevice::haveType` Generic use function that returns true if the advertisement data contains a field with the specified type.
|
||||
- Support for esp32c6, esp32c2 and esp32h2.
|
||||
- `NimBLEClient::setConnection` to be able to set a clients connection parameters, useful when a server wants to read data from the connected client.
|
||||
- `NimBLEClient::clearConnection` compliments `setConnection` to allow the client instance to be reused.
|
||||
- `NimBLEDevice::injectPassKey` Used to send the pairing passkey instead of a return value from the client callback.
|
||||
- `NimBLEDevice::injectConfirmPIN` Used to send the numeric comparison pairing PIN confirmation instead of a return value from the client callback.
|
||||
|
||||
## [1.4.0] - 2022-07-31
|
||||
|
||||
|
|
@ -120,7 +159,7 @@ All notable changes to this project will be documented in this file.
|
|||
|
||||
- `NimBLEService::getCharacteristicByHandle`: Get a pointer to the characteristic object with the specified handle.
|
||||
|
||||
- `NimBLEService::getCharacteristics`: Get the vector containing pointers to each characteristic associated with this service.
|
||||
- `NimBLEService::getCharacteristics`: Get the vector containing pointers to each characteristic associated with this service.
|
||||
Overloads to get a vector containing pointers to all the characteristics in a service with the UUID. (supports multiple same UUID's in a service)
|
||||
- `NimBLEService::getCharacteristics(const char *uuid)`
|
||||
- `NimBLEService::getCharacteristics(const NimBLEUUID &uuid)`
|
||||
|
|
@ -164,10 +203,10 @@ Overloads to get a vector containing pointers to all the characteristics in a se
|
|||
|
||||
- `NimBLEAdvertising` Custom scan response data can now be used without custom advertisment.
|
||||
|
||||
- `NimBLEScan` Now uses the controller duplicate filter.
|
||||
- `NimBLEScan` Now uses the controller duplicate filter.
|
||||
|
||||
- `NimBLEAdvertisedDevice` Has been refactored to store the complete advertisement payload and no longer parses the data from each advertisement.
|
||||
Instead the data will be parsed on-demand when the user application asks for specific data.
|
||||
- `NimBLEAdvertisedDevice` Has been refactored to store the complete advertisement payload and no longer parses the data from each advertisement.
|
||||
Instead the data will be parsed on-demand when the user application asks for specific data.
|
||||
|
||||
### Fixed
|
||||
- `NimBLEHIDDevice` Characteristics now use encryption, this resolves an issue with communicating with devices requiring encryption for HID devices.
|
||||
|
|
@ -176,84 +215,84 @@ Instead the data will be parsed on-demand when the user application asks for spe
|
|||
## [1.1.0] - 2021-01-20
|
||||
|
||||
### Added
|
||||
- `NimBLEDevice::setOwnAddrType` added to enable the use of random and random-resolvable addresses, by asukiaaa
|
||||
- `NimBLEDevice::setOwnAddrType` added to enable the use of random and random-resolvable addresses, by asukiaaa
|
||||
|
||||
- New examples for securing and authenticating client/server connections, by mblasee.
|
||||
- New examples for securing and authenticating client/server connections, by mblasee.
|
||||
|
||||
- `NimBLEAdvertising::SetMinPreferred` and `NimBLEAdvertising::SetMinPreferred` re-added.
|
||||
- `NimBLEAdvertising::SetMinPreferred` and `NimBLEAdvertising::SetMinPreferred` re-added.
|
||||
|
||||
- Conditional checks added for command line config options in `nimconfig.h` to support custom configuration in platformio.
|
||||
- Conditional checks added for command line config options in `nimconfig.h` to support custom configuration in platformio.
|
||||
|
||||
- `NimBLEClient::setValue` Now takes an extra bool parameter `response` to enable the use of write with response (default = false).
|
||||
- `NimBLEClient::setValue` Now takes an extra bool parameter `response` to enable the use of write with response (default = false).
|
||||
|
||||
- `NimBLEClient::getCharacteristic(uint16_t handle)` Enabling the use of the characteristic handle to be used to find
|
||||
the NimBLERemoteCharacteristic object.
|
||||
- `NimBLEClient::getCharacteristic(uint16_t handle)` Enabling the use of the characteristic handle to be used to find
|
||||
the NimBLERemoteCharacteristic object.
|
||||
|
||||
- `NimBLEHIDDevice` class added by wakwak-koba.
|
||||
- `NimBLEHIDDevice` class added by wakwak-koba.
|
||||
|
||||
- `NimBLEServerCallbacks::onDisconnect` overloaded callback added to provide a ble_gap_conn_desc parameter for the application
|
||||
to obtain information about the disconnected client.
|
||||
- `NimBLEServerCallbacks::onDisconnect` overloaded callback added to provide a ble_gap_conn_desc parameter for the application
|
||||
to obtain information about the disconnected client.
|
||||
|
||||
- Conditional checks in `nimconfig.h` for command line defined macros to support platformio config settings.
|
||||
- Conditional checks in `nimconfig.h` for command line defined macros to support platformio config settings.
|
||||
|
||||
### Changed
|
||||
- `NimBLEAdvertising::start` now returns a bool value to indicate success/failure.
|
||||
- `NimBLEAdvertising::start` now returns a bool value to indicate success/failure.
|
||||
|
||||
- Some asserts were removed in `NimBLEAdvertising::start` and replaced with better return code handling and logging.
|
||||
- Some asserts were removed in `NimBLEAdvertising::start` and replaced with better return code handling and logging.
|
||||
|
||||
- If a host reset event occurs, scanning and advertising will now only be restarted if their previous duration was indefinite.
|
||||
- If a host reset event occurs, scanning and advertising will now only be restarted if their previous duration was indefinite.
|
||||
|
||||
- `NimBLERemoteCharacteristic::subscribe` and `NimBLERemoteCharacteristic::registerForNotify` will now set the callback
|
||||
regardless of the existance of the CCCD and return true unless the descriptor write operation failed.
|
||||
regardless of the existance of the CCCD and return true unless the descriptor write operation failed.
|
||||
|
||||
- Advertising tx power level is now sent in the advertisement packet instead of scan response.
|
||||
- Advertising tx power level is now sent in the advertisement packet instead of scan response.
|
||||
|
||||
- `NimBLEScan` When the scan ends the scan stopped flag is now set before calling the scan complete callback (if used)
|
||||
this allows the starting of a new scan from the callback function.
|
||||
- `NimBLEScan` When the scan ends the scan stopped flag is now set before calling the scan complete callback (if used)
|
||||
this allows the starting of a new scan from the callback function.
|
||||
|
||||
### Fixed
|
||||
- Sometimes `NimBLEClient::connect` would hang on the task block if no event arrived to unblock.
|
||||
A time limit has been added to timeout appropriately.
|
||||
- Sometimes `NimBLEClient::connect` would hang on the task block if no event arrived to unblock.
|
||||
A time limit has been added to timeout appropriately.
|
||||
|
||||
- When getting descriptors for a characterisic the end handle of the service was used as a proxy for the characteristic end
|
||||
handle. This would be rejected by some devices and has been changed to use the next characteristic handle as the end when possible.
|
||||
- When getting descriptors for a characterisic the end handle of the service was used as a proxy for the characteristic end
|
||||
handle. This would be rejected by some devices and has been changed to use the next characteristic handle as the end when possible.
|
||||
|
||||
- An exception could occur when deleting a client instance if a notification arrived while the attribute vectors were being
|
||||
deleted. A flag has been added to prevent this.
|
||||
|
||||
- An exception could occur after a host reset event when the host re-synced if the tasks that were stopped during the event did
|
||||
not finish processing. A yield has been added after re-syncing to allow tasks to finish before proceeding.
|
||||
|
||||
- Occasionally the controller would fail to send a disconnected event causing the client to indicate it is connected
|
||||
and would be unable to reconnect. A timer has been added to reset the host/controller if it expires.
|
||||
|
||||
- Occasionally the call to start scanning would get stuck in a loop on BLE_HS_EBUSY, this loop has been removed.
|
||||
- An exception could occur when deleting a client instance if a notification arrived while the attribute vectors were being
|
||||
deleted. A flag has been added to prevent this.
|
||||
|
||||
- 16bit and 32bit UUID's in some cases were not discovered or compared correctly if the device
|
||||
advertised them as 16/32bit but resolved them to 128bits. Both are now checked.
|
||||
|
||||
- `FreeRTOS` compile errors resolved in latest Ardruino core and IDF v3.3.
|
||||
- An exception could occur after a host reset event when the host re-synced if the tasks that were stopped during the event did
|
||||
not finish processing. A yield has been added after re-syncing to allow tasks to finish before proceeding.
|
||||
|
||||
- Multiple instances of `time()` called inside critical sections caused sporadic crashes, these have been moved out of critical regions.
|
||||
- Occasionally the controller would fail to send a disconnected event causing the client to indicate it is connected
|
||||
and would be unable to reconnect. A timer has been added to reset the host/controller if it expires.
|
||||
|
||||
- Advertisement type now correctly set when using non-connectable (advertiser only) mode.
|
||||
- Occasionally the call to start scanning would get stuck in a loop on BLE_HS_EBUSY, this loop has been removed.
|
||||
|
||||
- Advertising payload length correction, now accounts for appearance.
|
||||
- 16bit and 32bit UUID's in some cases were not discovered or compared correctly if the device
|
||||
advertised them as 16/32bit but resolved them to 128bits. Both are now checked.
|
||||
|
||||
- (Arduino) Ensure controller mode is set to BLE Only.
|
||||
- `FreeRTOS` compile errors resolved in latest Ardruino core and IDF v3.3.
|
||||
|
||||
- Multiple instances of `time()` called inside critical sections caused sporadic crashes, these have been moved out of critical regions.
|
||||
|
||||
- Advertisement type now correctly set when using non-connectable (advertiser only) mode.
|
||||
|
||||
- Advertising payload length correction, now accounts for appearance.
|
||||
|
||||
- (Arduino) Ensure controller mode is set to BLE Only.
|
||||
|
||||
|
||||
## [1.0.2] - 2020-09-13
|
||||
|
||||
### Changed
|
||||
|
||||
- `NimBLEAdvertising::start` Now takes 2 optional parameters, the first is the duration to advertise for (in seconds), the second is a
|
||||
- `NimBLEAdvertising::start` Now takes 2 optional parameters, the first is the duration to advertise for (in seconds), the second is a
|
||||
callback that is invoked when advertsing ends and takes a pointer to a `NimBLEAdvertising` object (similar to the `NimBLEScan::start` API).
|
||||
|
||||
- (Arduino) Maximum BLE connections can now be altered by only changing the value of `CONFIG_BT_NIMBLE_MAX_CONNECTIONS` in `nimconfig.h`.
|
||||
Any changes to the controller max connection settings in `sdkconfig.h` will now have no effect when using this library.
|
||||
|
||||
- (Arduino) Revert the previous change to fix the advertising start delay. Instead a replacement fix that routes all BLE controller commands from
|
||||
- (Arduino) Revert the previous change to fix the advertising start delay. Instead a replacement fix that routes all BLE controller commands from
|
||||
a task running on core 0 (same as the controller) has been implemented. This improves response times and reliability for all BLE functions.
|
||||
|
||||
|
||||
|
|
|
|||
Loading…
Reference in a new issue