diff --git a/CMakeLists.txt b/CMakeLists.txt
index 055e5d9..a537e2c 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -39,6 +39,7 @@ idf_component_register(
     "esp32c3"
     "esp32c6"
     "esp32h2"
+    "esp32p4"
   INCLUDE_DIRS
     "src"
   SRCS
diff --git a/Kconfig b/Kconfig
index 0878176..db71798 100644
--- a/Kconfig
+++ b/Kconfig
@@ -76,4 +76,51 @@ config NIMBLE_CPP_DEBUG_ASSERT_ENABLED
         Enabling this option will add debug asserts to the NimBLE CPP library.
         This will use approximately 1kB of flash memory.
 
+#
+# BT config
+#
+config BT_ENABLED
+    bool "Bluetooth"
+    default "y"
+    help
+        Select this option to enable Bluetooth and show the submenu with Bluetooth configuration choices.
+
+
+config BT_NIMBLE_ENABLED
+    bool "NimBLE - BLE only"
+    default "y"
+    help
+        This option is recommended for BLE only usecases to save on memory
+
+if IDF_TARGET_ESP32P4
+
+    config BT_NIMBLE_TRANSPORT_UART
+        bool "Enable Uart Transport"
+        default "n"
+
+    #
+    # Enable ESP Hosted BT
+    # Used as VHCI transport between BT Host and Controller
+    #
+    config ESP_ENABLE_BT
+        bool "Enable Hosted Bluetooth support"
+        default "y"
+        help
+            Enable Bluetooth Support via Hosted
+
+    choice ESP_WIFI_REMOTE_LIBRARY
+        prompt "Choose WiFi-remote implementation"
+        default ESP_WIFI_REMOTE_LIBRARY_HOSTED
+        help
+            Select type of WiFi Remote implementation
+
+            ESP-HOSTED is the default and most versatile option.
+            It's also possible to use EPPP, which uses PPPoS link between micros and NAPT, so it's slower
+            and less universal.
+
+        config ESP_WIFI_REMOTE_LIBRARY_HOSTED
+            bool "ESP-HOSTED"
+    endchoice
+endif
+
 endmenu
diff --git a/idf_component.yml b/idf_component.yml
new file mode 100644
index 0000000..52a0df2
--- /dev/null
+++ b/idf_component.yml
@@ -0,0 +1,16 @@
+## IDF Component Manager Manifest File
+dependencies:
+  espressif/esp_hosted:
+    version: "*"
+    rules:
+      - if: "target in [esp32p4]"
+  espressif/esp_wifi_remote:
+    version: "*"
+    rules:
+      - if: "target in [esp32p4]"
+
+  ## Required IDF version
+  idf:
+    version: ">=5.3.0"
+    rules:
+      - if: "target in [esp32p4]"
diff --git a/src/NimBLEAdvertising.cpp b/src/NimBLEAdvertising.cpp
index 9c21634..0ac09d7 100644
--- a/src/NimBLEAdvertising.cpp
+++ b/src/NimBLEAdvertising.cpp
@@ -56,7 +56,9 @@ void NimBLEAdvertising::reset() {
     m_advData.name                   = (uint8_t *)name;
     m_advData.name_len               = strlen(name);
     m_advData.name_is_complete       = 1;
+#ifndef CONFIG_IDF_TARGET_ESP32P4
     m_advData.tx_pwr_lvl             = NimBLEDevice::getPower();
+#endif
     m_advData.flags                  = (BLE_HS_ADV_F_DISC_GEN | BLE_HS_ADV_F_BREDR_UNSUP);
 
 #if !defined(CONFIG_BT_NIMBLE_ROLE_PERIPHERAL)
@@ -1018,7 +1020,9 @@ void NimBLEAdvertisementData::addTxPower() {
     char cdata[3];
     cdata[0] = BLE_HS_ADV_TX_PWR_LVL_LEN + 1;
     cdata[1] = BLE_HS_ADV_TYPE_TX_PWR_LVL;
+#ifndef CONFIG_IDF_TARGET_ESP32P4
     cdata[2] = NimBLEDevice::getPower();
+#endif
     addData(cdata, 3);
 } // addTxPower
 
diff --git a/src/NimBLEDevice.cpp b/src/NimBLEDevice.cpp
index 00ff8f4..f6d7019 100644
--- a/src/NimBLEDevice.cpp
+++ b/src/NimBLEDevice.cpp
@@ -20,7 +20,9 @@
 
 #ifdef ESP_PLATFORM
 #  include "esp_err.h"
+#ifndef CONFIG_IDF_TARGET_ESP32P4
 #  include "esp_bt.h"
+#endif
 #  include "nvs_flash.h"
 #  if defined(CONFIG_NIMBLE_CPP_IDF)
 #    if (ESP_IDF_VERSION < ESP_IDF_VERSION_VAL(5, 0, 0) || CONFIG_BT_NIMBLE_LEGACY_VHCI_ENABLE)
@@ -360,6 +362,7 @@ NimBLEClient* NimBLEDevice::getDisconnectedClient() {
 #endif // #if defined(CONFIG_BT_NIMBLE_ROLE_CENTRAL)
 
 #ifdef ESP_PLATFORM
+#ifndef CONFIG_IDF_TARGET_ESP32P4
 /**
  * @brief Set the transmission power.
  * @param [in] powerLevel The power level to set, can be one of:
@@ -438,7 +441,7 @@ int NimBLEDevice::getPower(esp_ble_power_type_t powerType) {
             return BLE_HS_ADV_TX_PWR_LVL_AUTO;
     }
 } // getPower
-
+#endif
 #else
 
 void NimBLEDevice::setPower(int dbm) {
diff --git a/src/NimBLEDevice.h b/src/NimBLEDevice.h
index 121df58..b9dce8d 100644
--- a/src/NimBLEDevice.h
+++ b/src/NimBLEDevice.h
@@ -42,8 +42,10 @@ class NimBLEClient;
 #include "NimBLEAddress.h"
 
 #ifdef ESP_PLATFORM
+#ifndef CONFIG_IDF_TARGET_ESP32P4
 #  include "esp_bt.h"
 #endif
+#endif
 
 #include <string>
 #include <array>
@@ -116,8 +118,10 @@ public:
 #endif
 
 #ifdef ESP_PLATFORM
+#ifndef CONFIG_IDF_TARGET_ESP32P4
     static void             setPower(esp_power_level_t powerLevel, esp_ble_power_type_t powerType=ESP_BLE_PWR_TYPE_DEFAULT);
     static int              getPower(esp_ble_power_type_t powerType=ESP_BLE_PWR_TYPE_DEFAULT);
+#endif
     static void             setOwnAddrType(uint8_t own_addr_type, bool useNRPA=false);
     static void             setScanDuplicateCacheSize(uint16_t cacheSize);
     static void             setScanFilterMode(uint8_t type);