# Changelog All notable changes to this project will be documented in this file. ## [Unreleased] ## Fixed - `NimBLEHIDDevice::getOutputReport` will now return the correct characteristic. - Compile error when central is disabled. ## [2.0.0] 2024-12-14 ## **Breaking changes** - All connection oriented callbacks now receive a reference to `NimBLEConnInfo`, the `ble_gap_conn_desc` has also been replace with `NimBLEConnInfo` in the functions that received it. - All functions that take a time input parameter now expect the value to be in milliseconds instead of seconds. - Removed Eddystone URL as it has been shutdown by google since 2021. - NimBLESecurity class removed. - `NimBLEDevice` Ignore list functions removed. - `NimBLEDevice::startSecurity` now returns a `bool`, true on success, instead of an int to be consistent with the rest of the library. - `NimBLEDevice::getInitialized` renamed to `NimBLEDevice::isInitialized`. - `NimBLEDevice::setPower` no longer takes the `esp_power_level_t` and `esp_ble_power_type_t`, instead only an integer value in dbm units is accepted. - `NimBLEDevice::setOwnAddrType` no longer takes a `bool nrpa` parameter. - `NimBLEDevice::getClientListSize` replaced with `NimBLEDevice::getCreatedClientCount`. - `NimBLEDevice::getClientList` was removed. - `NimBLEServer::disconnect` now returns `bool`, true = success, instead of `int` to be consistent with the rest of the library. - `NimBLEServerCallbacks::onMTUChanged` renamed to `NimBLEServerCallbacks::onMTUChange` to be consistent with the client callback. - `NimBLEServer::getPeerIDInfo` renamed to `NimBLEServer::getPeerInfoByHandle` to better describe it's use. - `NimBLEServerCallbacks::onPassKeyRequest` has been replaced with `NimBLEServer::onPassKeyDisplay` which should display the pairing pin that the client is expected to send. - `NimBLEServerCallbacks::onAuthenticationComplete` now takes a `NimBLEConnInfo&` parameter. - `NimBLEClient::getServices` now returns a const reference to std::vector instead of a pointer to the internal vector. - `NimBLEClient::getConnId` has been renamed to `getConnHandle` to be consistent with bluetooth terminology. - `NimBLEClient::disconnect` now returns a `bool`, true on success, instead of an int to be consistent with the rest of the library. - `NimBLEClientCallbacks::onDisconnect` now takes an additional `int reason` parameter to let the application know why the disconnect occurred. - `NimBLEClientCallbacks::onPassKeyRequest` has been changed to `NimBLEClientCallbacks::onPassKeyEntry` which takes a `NimBLEConnInfo&` parameter and does not return a value. Instead or returning a value this callback should prompt a user to enter a pin number which is sent later via `NimBLEDevice::injectPassKey`. - `NimBLEClientCallbacks::onConfirmPIN` renamed to `NimBLEClientCallbacks::onConfirmPasskey` and no longer returns a value and now takes a `NimBLEConnInfo&` parameter. This should be used to prompt a user to confirm the pin on the display (YES/NO) after which the response should be sent with `NimBLEDevice::injectConfirmPasskey`. - `NimBLEAdvertising::setMinPreferred` and `NimBLEAdvertising::setMaxPreferred` have been removed, use `NimBLEAdvertising::setPreferredParams` instead. - Advertising the name and TX power of the device will no longer happen by default and should be set manually by the application. - `NimBLEAdvertising::setAdvertisementType` has been renamed to `NimBLEAdvertising::setConnectableMode` to better reflect it's function. - `NimBLEAdvertising::setScanResponse` has been renamed to `NimBLEAdvertising::enableScanResponse` to better reflect it's function. - `NimBLEAdvertising`; Scan response is no longer enabled by default. - `NimBLEAdvertising::start` No longer takes a callback pointer parameter, instead the new method `NimBLEAdvertising::setAdvertisingCompleteCallback` should be used. - `NimBLEAdvertisementData::addData` now takes either a `std::vector` or `uint8_t* + length` instead of `std::string` or `char + length`. - `NimBLEAdvertisementData::getPayload` now returns `std::vector` instead of `std::string`. - The callback parameter for `NimBLEScan::start` has been removed and the blocking overload of `NimBLEScan::start` has been replaced by an overload of `NimBLEScan::getResults` with the same parameters. - `NimBLEAdvertisedDeviceCallbacks` Has been replaced by `NimBLEScanCallbacks` which contains the following methods: `onResult`, `onScanEnd`, and `onDiscovered - - `NimBLEScanCallbacks::onResult`, functions the same as the old `NimBLEAdvertisedDeviceCallbacks::onResult` but now takes aa `const NimBLEAdvertisedDevice*` instead of non-const. - - `NimBLEScanCallbacks::onScanEnd`, replaces the scanEnded callback passed to `NimBLEScan::start` and now takes a `const NimBLEScanResults&` and `int reason` parameter. - - `NimBLEScanCallbacks::onDiscovered`, This is called immediately when a device is first scanned, before any scan response data is available and takes a `const NimBLEAdvertisedDevice*` parameter. - `NimBLEScan::stop` will no longer call the `onScanEnd` callback as the caller should know its been stopped when this is called. - `NimBLEScan::clearDuplicateCache` has been removed as it was problematic and only for the esp32. Stop and start the scanner for the same effect. - `NimBLEScanResults::getDevice` methods now return `const NimBLEAdvertisedDevice*`. - `NimBLEScanResults` iterators are now `const_iterator`. - `NimBLEAdvertisedDevice::hasRSSI` removed as redundant, RSSI is always available. - `NimBLEAdvertisedDevice::getPayload` now returns `const std::vector` instead of a pointer to internal memory. - `NimBLEAdvertisedDevice` Timestamp removed, if needed then the app should track the time from the callback. - `NimBLECharacteristic::notify` no longer takes a `bool is_notification` parameter, instead `indicate()` should be called to send indications. - `NimBLECharacteristicCallbacks::onNotify` removed as unnecessary, the library does not call notify without app input. - `NimBLECharacteristicCallbacks::onStatus` No longer takes a `status` parameter, refer to the return code for success/failure. - `NimBLERemoteCharacteristic::getRemoteService` now returns a `const NimBLERemoteService*` instead of non-const. - `NimBLERemoteCharacteristic::readUInt32` Has been removed. - `NimBLERemoteCharacteristic::readUInt16` Has been removed. - `NimBLERemoteCharacteristic::readUInt8` Has been removed. - `NimBLERemoteCharacteristic::readFloat` Has been removed. - `NimBLERemoteCharacteristic::registerForNotify` Has been removed. - `NimBLERemoteService::getCharacteristics` now returns a `const std::vector&` instead of non-const `std::vector*`. - `NimBLERemoteService::getValue` now returns `NimBLEAttValue` instead of `std::string`. - `NimBLEService::getCharacteristics` now returns a `const std::vector&` instead of std::vector. - `NimBLEUUID::getNative` method replaced with `NimBLEUUID::getBase` which returns a read-only pointer to the underlying `ble_uuid_t` struct. - `NimBLEUUID`; `msbFirst` parameter has been removed from constructor, caller should reverse the data first or call the new `reverseByteOrder` method after. - `NimBLEAddress` constructor; default value for the `type` parameter removed, caller should know the address type and specify it. - `NimBLEAddress::getNative` replaced with `NimBLEAddress::getBase` and now returns a pointer to `const ble_addr_t` instead of a pointer to the address value. - `NimBLEAddress::equals` method and `NimBLEAddress::== operator` will now also test if the address types are the same. - `NimBLEUtils::dumpGapEvent` function removed. - `NimBLEUtils::buildHexData` replaced with `NimBLEUtils::dataToHexString`, which returns a `std::string` containing the hex string. - `NimBLEEddystoneTLM::setTemp` now takes an `int16_t` parameter instead of float to be friendly to devices without floating point support. - `NimBLEEddystoneTLM::getTemp` now returns `int16_t` to work with devices that don't have floating point support. - `NimBLEEddystoneTLM::setData` now takes a reference to * `NimBLEEddystoneTLM::BeaconData` instead of `std::string`. - `NimBLEEddystoneTLM::getData` now returns a reference to * `NimBLEEddystoneTLM::BeaconData` instead of `std::string`. - `NimBLEBeacon::setData` now takes `const NimBLEBeacon::BeaconData&` instead of `std::string`. - `NimBLEBeacon::getData` now returns `const NimBLEBeacon::BeaconData&` instead of `std::string`. - `NimBLEHIDDevice::reportMap` renamed to `NimBLEHIDDevice::getReportMap`. - `NimBLEHIDDevice::hidControl` renamed to `NimBLEHIDDevice::getHidControl`. - `NimBLEHIDDevice::inputReport`renamed to `NimBLEHIDDevice::getInputReport`. - `NimBLEHIDDevice::outputReport`renamed to `NimBLEHIDDevice::getOutputReport`. - `NimBLEHIDDevice::featureReport`renamed to `NimBLEHIDDevice::getFeatureReport`. - `NimBLEHIDDevice::protocolMode`renamed to `NimBLEHIDDevice::getProtocolMode`. - `NimBLEHIDDevice::bootOutput`renamed to `NimBLEHIDDevice::getBootOutput`. - `NimBLEHIDDevice::pnp`renamed to `NimBLEHIDDevice::setPnp`. - `NimBLEHIDDevice::hidInfo`renamed to `NimBLEHIDDevice::setHidInfo`. - `NimBLEHIDDevice::deviceInfo`renamed to `NimBLEHIDDevice::getDeviceInfoService`. - `NimBLEHIDDevice::hidService`renamed to `NimBLEHIDDevice::getHidService`. - `NimBLEHIDDevice::batteryService`renamed to `NimBLEHIDDevice::getBatteryService`. ## Fixed - `NimBLEDevice::getPower` and `NimBLEDevice::getPowerLevel` bug worked around for the esp32s3 and esp32c3. - `NimBLEDevice::setPower` and `NimBLEDevice::getPower` now support the full power range for all esp devices. - `NimBLEDevice::setOwnAddrType` will now correctly apply the provided address type for all devices. - `NimBLEDevice::getPower` (esp32) return value is now calculated to support devices with different min/max ranges. - Crash if `NimBLEDevice::deinit` is called when the stack has not been initialized. - `NimBLEServer` service changed notifications will now wait until the changes have taken effect and the server re-started before indicating the change to peers, reducing difficultly for some clients to update their data. - `NimBLEService::getHandle` will now fetch the handle from the stack if not valid to avoid returning an invalid value. - `std::vector` input to set/write values template. - `NimBLEHIDDevice::pnp` will now set the data correctly. - Check for Arduino component - Fixed building with esp-idf version 5.x. - Fixed pairing failing when the process was started by the peer first. - Fixed building with esp-idf and Arduino component. - Workaround for esp32s3 and esp32c3 not returning the correct txPower with some IDF versions. ### Changed - `NimBLEClient::secureConnection` now takes an additional parameter `bool async`, if true, will send the secure command and return immediately with a true value for successfully sending the command, else false. This allows for asynchronously securing a connection. - Deleting the client instance from the `onDisconnect` callback is now supported. - `NimBLEClient::connect` will no longer cancel already in progress connections. - `NimBLEClient::setDataLen` now returns bool, true if successful. - `NimBLEClient::updateConnParams` now returns bool, true if successful. - `NimBLEClient::setPeerAddress` now returns a bool, true on success. - `NimBLEDevice::startSecurity` now takes and additional parameter `int* rcPtr` which will provide the return code from the stack if provided. - `NimBLEDevice::deleteClient` no longer blocks tasks. - `NimBLEDevice::getAddress` will now return the address currently in use. - `NimBLEDevice::init` now returns a bool with `true` indicating success. - `NimBLEDevice::deinit` now returns a bool with `true` indicating success. - `NimBLEDevice::setDeviceName` now returns a bool with `true` indicating success. - `NimBLEDevice::setCustomGapHandler` now returns a bool with `true` indicating success. - `NimBLEDevice::setOwnAddrType` now returns a bool with `true` indicating success and works with non-esp32 devices. - `NimBLEDevice::setPower` now returns a bool value, true = success. - `NimBLEDevice::setMTU` now returns a bool value, true = success. - `NimBLEDevice::deleteAllBonds` now returns true on success, otherwise false. - `NimBLEEddystoneTLM` internal data struct type `BeaconData` is now public and usable by the application. - `NimBLEBeacon` internal data struct type `BeaconData` is now public and can be used by the application. - Removed tracking of client characteristic subscription status from `NimBLEServer` and `NimBLECharacteristic` and instead uses the functions and tracking in the host stack. - `NimBLECharacteristic::indicate` now takes the same parameters as `notify`. - `NimBLECharacteristic::notify` and `NimBLECharacteristic::indicate` now return a `bool`, true = success. - Added optional `connHandle` parameter to `NimBLECharacteristic::notify` to allow for sending notifications to specific clients. - `NimBLEServer` Now uses a std::array to store client connection handles instead of std::vector to reduce memory allocation. - `NimBLEExtAdvertisement` : All functions that set data now return `bool`, true = success. - `NimBLEAdvertising` Advertising data is now stored in instances of `NimBLEAdvertisingData` and old vectors removed. - `NimBLEAdvertising::setAdvertisementData` and `NimBLEAdvertising::setScanResponseData` now return `bool`, true = success. - Added optional `NimBLEAddress` parameter to `NimBLEAdvertising::start` to allow for directed advertising to a peer. - All `NimBLEAdvertising` functions that change data values now return `bool`, true = success. - All `NimBLEAdvertisementData` functions that change data values now return `bool`, true = success. - `NimBLEAdvertising` advertising complete callback is now defined as std::function to allow for using std::bind for callback functions. - `NimBLEAdvertisementData::setName` now takes an optional `bool` parameter to indicate if the name is complete or incomplete, default = complete. - `NimBLEAdvertisementData` moved to it's own .h and .cpp files. - `NimBLEScan::start` takes a new `bool restart` parameter, default `true`, that will restart an already in progress scan and clear the duplicate filter so all devices will be discovered again. - Scan response data that is received without advertisement first will now create the device and send a callback. - `NimBLEScan::start` will no longer clear cache or results if scanning is already in progress. - `NimBLEScan::start` will now allow the start command to be sent with updated parameters if already scanning. - `NimBLEScan::clearResults` will now reset the vector capacity to 0. - Host reset will now no longer restart scanning and instead will call `NimBLEScanCallbacks::onScanEnd`. - Added optional `index` parameter to `NimBLEAdvertisedDevice::getPayloadByType` - `NimBLEAdvertisedDevice::getManufacturerData` now takes an optional index parameter for use in the case of multiple manufacturer data fields. - `NimBLEUtils`: Add missing GAP event strings. - `NimBLEUtils`: Add missing return code strings. - `NimBLEUtils`: Event/error code strings optimized. - `NimBLEAttValue` cleanup and optimization. - cleaned up code, removed assert/abort calls, replaced with a configurable option to enable debug asserts. ### Added - (esp32 specific) `NimBLEDevice::setPowerLevel` and `NimBLEDevice::getPowerLevel` which take and return the related `esp_power_level* ` types. - `NimBLEDevice::setDefaultPhy` which will set the default preferred PHY for all connections. - `NimBLEDevice::getConnectedClients`, which returns a vector of pointers to the currently connected client instances. - `NimBLEDevice::setOwnAddr` function added, which takes a `uint8_t*` or `NimBLEAddress&` and will set the mac address of the device, returns `bool` true= success. - `NimBLEDevice::injectPassKey` Used to send the pairing passkey instead of a return value from the client callback. - `NimBLEDevice::injectConfirmPasskey` Used to send the numeric comparison pairing passkey confirmation instead of a return value from the client callback. - `NimBLEDevice::setDeviceName` to change the device name after initialization. - `NimBLECharacteristic::create2904` which will specifically create a Characteristic Presentation Format (0x2904) descriptor. - `NimBLEAdvertising::refreshAdvertisingData` refreshes the advertisement data while still actively advertising. - `NimBLEClient::updatePhy` to request a PHY change with a peer. - `NimBLEClient::getPhy` to read the current connection PHY setting. - `Config` struct to `NimBLEClient` to efficiently set single bit config settings. - `NimBLEClient::setSelfDelete` that takes the bool parameters `deleteOnDisconnect` and `deleteOnConnectFail`, which will configure the client to delete itself when disconnected or the connection attempt fails. - `NimBLEClient::setConfig` and `NimBLEClient::getConfig` which takes or returns a `NimBLEClient::Config` object respectively. - `NimBLEClient::cancelConnect()` to cancel an in-progress connection, returns `bool`, true = success. - Non-blocking `NimBLEClient::connect` option added via 2 new `bool` parameters added to the function: - * `asyncConnect`; if true, will send the connect command and return immediately. - * `exchangeMTU`; if true will send the exchange MTU command upon connection. - `NimBLEClientCallbacks::onConnectFail` callback that is called when the connection attempt fail while connecting asynchronously. - `NimBLEClientCallbacks::onMTUChange` callback which will be called when the MTU exchange completes and takes a `NimBLEClient*` and `uint16_t MTU` parameter. - `NimBLEClientCallbacks::onPhyUpdate` and -`NimBLEServerCallbacks::onPhyUpdate` Which are called when the PHY update is complete. - Extended scan example. - `NimBLEServer::updatePhy` to request a PHY change with a peer. - `NimBLEServer::getPhy` to read the PHY of a peer connection. - `NimBLEServer::getClient` which will create a client instance from the provided peer connHandle or connInfo to facilitate reading/write from the connected client. - `NimBLEServerCallbacks::onConnParamsUpdate` callback. - `NimBLEScan::erase` overload that takes a `const NimBLEAdvertisedDevice*` parameter. - `NimBLEScan::setScanPhy` to enable/disable the PHY's to scan on (extended advertising only). - `NimBLEScan::setScanPeriod` which will allow for setting a scan restart timer in the controller (extended advertising only). - `NimBLEAdvertisedDevice::isScannable()` that returns true if the device is scannable. - `NimBLEAdvertisedDevice::begin` and `NimBLEAdvertisedDevice::end` read-only iterators for convenience and use in range loops. - `NimBLEAdvertisedDevice::getAdvFlags` returns the advertisement flags of the advertiser. - `NimBLEAdvertisedDevice::getPayloadByType` Generic use function that returns the data from the advertisement with the specified type. - `NimBLEAdvertisedDevice::haveType` Generic use function that returns true if the advertisement data contains a field with the specified type. - Support for esp32c6, esp32c2, esp32h2, and esp32p4. - `NimBLEExtAdvertisement::removeData`, which will remove the data of the specified type from the advertisement. - `NimBLEExtAdvertisement::addServiceUUID`, which will append to the service uuids advertised. - `NimBLEExtAdvertisement::removeServiceUUID`, which will remove the service from the uuids advertised. - `NimBLEExtAdvertisement::removeServices`, which will remove all service uuids advertised. - New overloads for `NimBLEExtAdvertisement::setServiceData` with the parameters `const NimBLEUUID& uuid, const uint8_t* data, size_t length` and `const NimBLEUUID& uuid, const std::vector& data`. - `NimBLEExtAdvertisement::getDataLocation`, which returns the location in the advertisement data of the type requested in parameter `uint8_t type`. - `NimBLEExtAdvertisement::toString` which returns a hex string representation of the advertisement data. - `NimBLEAdvertising::getAdvertisementData`, which returns a reference to the currently set advertisement data. - `NimBLEAdvertising::getScanData`, which returns a reference to the currently set scan response data. - New overloads for `NimBLEAdvertising::removeServiceUUID` and `NimBLEAdvertisementData::removeServiceUUID` to accept a `const char*` - `NimBLEAdvertising::clearData`, which will clear the advertisement and scan response data. - `NimBLEAdvertising::setManufacturerData` Overload that takes a `const uint8_t*` and , size_t` parameter. - `NimBLEAdvertising::setServiceData` Overload that takes `const NimBLEUUID& uuid`, ` const uint8_t* data`, ` size_t length` as parameters. - `NimBLEAdvertising::setServiceData` Overload that takes `const NimBLEUUID& uuid`, `const std::vector&` as parameters. - `NimBLEAdvertising::setDiscoverableMode` to allow applications to control the discoverability of the advertiser. - `NimBLEAdvertising::setAdvertisingCompleteCallback` sets the callback to call when advertising ends. - `NimBLEAdvertising::setPreferredParams` that takes the min and max preferred connection parameters as an alternative for `setMinPreferred` and `setMaxPreferred`. - `NimBLEAdvertising::setAdvertisingInterval` Sets the advertisement interval for min and max to the same value instead of calling `setMinInterval` and `setMaxInterval` separately if there is not value difference. - `NimBLEAdvertisementData::removeData`, which takes a parameter `uint8_t type`, the data type to remove. - `NimBLEAdvertisementData::toString`, which will print the data in hex. - `NimBLEUtils::taskWait` which causes the calling task to wait for an event. - `NimBLEUtils::taskRelease` releases the task from and event. - `NimBLEUtils::generateAddr` function added with will generate a random address and takes a `bool` parameter, true = create non-resolvable private address, otherwise a random static address is created, returns `NimBLEAddress`. - `NimBLEUUID::getValue` which returns a read-only `uint8_t` pointer to the UUID value. - `NimBLEUUID::reverseByteOrder`, this will reverse the bytes of the UUID, which can be useful for advertising/logging. - `NimBLEUUID` constructor overload that takes a reference to `ble_uuid_any_t`. - `NimBLEAddress::isNrpa` method to test if an address is random non-resolvable. - `NimBLEAddress::isStatic` method to test if an address is random static. - `NimBLEAddress::isPublic` method to test if an address is a public address. - `NimBLEAddress::isNull` methods to test if an address is NULL. - `NimBLEAddress::getValue` method which returns a read-only pointer to the address value. - `NimBLEAddress::reverseByteOrder` method which will reverse the byte order of the address value. - `NimBLEHIDDevice::batteryLevel` returns the HID device battery level characteristic. - `NimBLEBeacon::setData` overload that takes `uint8_t* data` and `uint8_t length`. - `NimBLEHIDDevice::getPnp` function added to access the pnp characteristic. - `NimBLEHIDDevice::getHidInfo` function added to access the hid info characteristic. ## [1.4.1] - 2022-10-30 ### Fixed - NimBLEDevice::getPower incorrect value when power level is -3db. - Failed pairing when already in progress. ### Changed - Revert previous change that forced writing with response when subscribing in favor of allowing the application to decide. ### Added - Added NimBLEHIDDevice::batteryLevel. - Added NimBLEDevice::setDeviceName allowing for changing the device name while the BLE stack is active. - CI Builds ## [1.4.0] - 2022-07-31 ### Fixed - Fixed missing data from long notification values. - Fixed NimbleCharacteristicCallbacks::onRead not being called when a non-long read command is received. - Prevent a potential crash when retrieving characteristics from a service if the result was successful but no characteristics found. - logs/typos. ### Changed - AD flags are no longer set in the advertisements of non-connectable beacons, freeing up 3 bytes of advertisement room. - Save resources when retrieving descriptors if the characteristic handle is the same as the end handle (no descriptors). - Subscribing to characteristic notifications/indications will now always use write with response, as per BLE specifications. - `NimBLEClient::discoverAttributes` now returns a bool value to indicate success/failure. - Scan result callbacks are no longer called when the scan response data is updated in order to reduce duplicates. ### Added - Preliminary support for non-esp devices, NRF51 and NRF52 devices supported with [n-able arduino core](https://github.com/h2zero/n-able-Arduino) - Alias added for `NimBLEServerCallbacks::onMTUChange` to `onMtuChanged` in order to support porting code from original library. - `NimBLEAttValue` Class added to reduce and control RAM footprint of characteristic/descriptor values and support conversions from Arduino Strings and many other data types. - Bluetooth 5 extended advertising support for capable devices. CODED Phy, 2M Phy, extended advertising data, and multi-advertising are supported, periodic advertising will be implemented in the future. ## [1.3.3] - 2022-02-15 ### Changed - If attribute retrieval fails with a "not found" try again with the 16 bit version if a 128 bit base uuid is used. ### Fixed - Memory leak when deleting client instance. - IDf version check for data length extension. - Memory leak when server services changed. - Compiler warnings for non-esp32 devices. ## [1.3.2] - 2022-01-15 ### Fixed - Initialize advertising complete callback in NimBLEAdvertising constructor. - Clear client disconnect timer in constructor before initializing. - Fix missing data when reading large values. - Fix missing data in notifications when using a large MTU size and more than 270 bytes of data are sent. - Workaround fix added for cases when the task notification value is not cleared, causing various functions that should block not to block. ### Added - `NimBLEClient::getLastError` : Gets the error code of the last function call that produces a return code from the stack. - `NimBLECharacteristic::notify` : Overload method to send notifications/indications with custom values. - Added conditional checks for ESP32 specific functions/values to support use of the library on non-esp32 devices. - Added an alias to use the callback name from the original library `onMtuChanged`. - `NimBLEClient::setDataLen` and `NimBLEServer::setDataLen`: Data length extension support (IDF version >= 4.3.2 only) - Config option to set logging level for esp-nimble-cpp ### Changed - Critical section calls now use the NimBLE API instead of FreeRTOS directly. This removes the need for a `portMUX_TYPE` variable in the class definitions. - Removed unnecessary variables in `NimBLEService` and changed the constructor no no longer accept `numHandles` and `inst_id` parameters. ## [1.3.1] - 2021-08-04 ### Fixed - Corrected a compiler/linker error when an application or a library uses bluetooth classic due to the redefinition of `btInUse`. ## [1.3.0] - 2021-08-02 ### Added - `NimBLECharacteristic::removeDescriptor`: Dynamically remove a descriptor from a characteristic. Takes effect after all connections are closed and sends a service changed indication. - `NimBLEService::removeCharacteristic`: Dynamically remove a characteristic from a service. Takes effect after all connections are closed and sends a service changed indication - `NimBLEServerCallbacks::onMTUChange`: This is callback is called when the MTU is updated after connection with a client. - ESP32C3 support - Whitelist API: - `NimBLEDevice::whiteListAdd`: Add a device to the whitelist. - `NimBLEDevice::whiteListRemove`: Remove a device from the whitelist. - `NimBLEDevice::onWhiteList`: Check if the device is on the whitelist. - `NimBLEDevice::getWhiteListCount`: Gets the size of the whitelist - `NimBLEDevice::getWhiteListAddress`: Get the address of a device on the whitelist by index value. - Bond management API: - `NimBLEDevice::getNumBonds`: Gets the number of bonds stored. - `NimBLEDevice::isBonded`: Checks if the device is bonded. - `NimBLEDevice::deleteAllBonds`: Deletes all bonds. - `NimBLEDevice::getBondedAddress`: Gets the address of a bonded device by the index value. - `NimBLECharacteristic::getCallbacks` to retrieve the current callback handler. - Connection Information class: `NimBLEConnInfo`. - `NimBLEScan::clearDuplicateCache`: This can be used to reset the cache of advertised devices so they will be immediately discovered again. ### Changed - FreeRTOS files have been removed as they are not used by the library. - Services, characteristics and descriptors can now be created statically and added after. - Excess logging and some asserts removed. - Use ESP_LOGx macros to enable using local log level filtering. ### Fixed - `NimBLECharacteristicCallbacks::onSubscribe` Is now called after the connection is added to the vector. - Corrected bonding failure when reinitializing the BLE stack. - Writing to a characteristic with a std::string value now correctly writes values with null characters. - Retrieving remote descriptors now uses the characteristic end handle correctly. - Missing data in long writes to remote descriptors. - Hanging on task notification when sending an indication from the characteristic callback. - BLE controller memory could be released when using Arduino as a component. - Compile errors with NimBLE release 1.3.0. ## [1.2.0] - 2021-02-08 ### Added - `NimBLECharacteristic::getDescriptorByHandle`: Return the BLE Descriptor for the given handle. - `NimBLEDescriptor::getStringValue`: Get the value of this descriptor as a string. - `NimBLEServer::getServiceByHandle`: Get a service by its handle. - `NimBLEService::getCharacteristicByHandle`: Get a pointer to the characteristic object with the specified handle. - `NimBLEService::getCharacteristics`: Get the vector containing pointers to each characteristic associated with this service. Overloads to get a vector containing pointers to all the characteristics in a service with the UUID. (supports multiple same UUID's in a service) - `NimBLEService::getCharacteristics(const char *uuid)` - `NimBLEService::getCharacteristics(const NimBLEUUID &uuid)` - `NimBLEAdvertisementData` New methods: - `NimBLEAdvertisementData::addTxPower`: Adds transmission power to the advertisement. - `NimBLEAdvertisementData::setPreferredParams`: Adds connection parameters to the advertisement. - `NimBLEAdvertisementData::setURI`: Adds URI data to the advertisement. - `NimBLEAdvertising` New methods: - `NimBLEAdvertising::setName`: Set the name advertised. - `NimBLEAdvertising::setManufacturerData`: Adds manufacturer data to the advertisement. - `NimBLEAdvertising::setURI`: Adds URI data to the advertisement. - `NimBLEAdvertising::setServiceData`: Adds service data to the advertisement. - `NimBLEAdvertising::addTxPower`: Adds transmission power to the advertisement. - `NimBLEAdvertising::reset`: Stops the current advertising and resets the advertising data to the default values. - `NimBLEDevice::setScanFilterMode`: Set the controller duplicate filter mode for filtering scanned devices. - `NimBLEDevice::setScanDuplicateCacheSize`: Sets the number of advertisements filtered before the cache is reset. - `NimBLEScan::setMaxResults`: This allows for setting a maximum number of advertised devices stored in the results vector. - `NimBLEAdvertisedDevice` New data retrieval methods added: - `haveAdvInterval/getAdvInterval`: checks if the interval is advertised / gets the advertisement interval value. - `haveConnParams/getMinInterval/getMaxInterval`: checks if the parameters are advertised / get min value / get max value. - `haveURI/getURI`: checks if a URI is advertised / gets the URI data. - `haveTargetAddress/getTargetAddressCount/getTargetAddress(index)`: checks if a target address is present / gets a count of the addresses targeted / gets the address of the target at index. ### Changed - `nimconfig.h` (Arduino) is now easier to use. - `NimBLEServer::getServiceByUUID` Now takes an extra parameter of instanceID to support multiple services with the same UUID. - `NimBLEService::getCharacteristic` Now takes an extra parameter of instanceID to support multiple characteristics with the same UUID. - `NimBLEAdvertising` Transmission power is no longer advertised by default and can be added to the advertisement by calling `NimBLEAdvertising::addTxPower` - `NimBLEAdvertising` Custom scan response data can now be used without custom advertisement. - `NimBLEScan` Now uses the controller duplicate filter. - `NimBLEAdvertisedDevice` Has been refactored to store the complete advertisement payload and no longer parses the data from each advertisement. Instead the data will be parsed on-demand when the user application asks for specific data. ### Fixed - `NimBLEHIDDevice` Characteristics now use encryption, this resolves an issue with communicating with devices requiring encryption for HID devices. ## [1.1.0] - 2021-01-20 ### Added - `NimBLEDevice::setOwnAddrType` added to enable the use of random and random-resolvable addresses, by asukiaaa - New examples for securing and authenticating client/server connections, by mblasee. - `NimBLEAdvertising::SetMinPreferred` and `NimBLEAdvertising::SetMinPreferred` re-added. - Conditional checks added for command line config options in `nimconfig.h` to support custom configuration in platformio. - `NimBLEClient::setValue` Now takes an extra bool parameter `response` to enable the use of write with response (default = false). - `NimBLEClient::getCharacteristic(uint16_t handle)` Enabling the use of the characteristic handle to be used to find the NimBLERemoteCharacteristic object. - `NimBLEHIDDevice` class added by wakwak-koba. - `NimBLEServerCallbacks::onDisconnect` overloaded callback added to provide a ble_gap_conn_desc parameter for the application to obtain information about the disconnected client. - Conditional checks in `nimconfig.h` for command line defined macros to support platformio config settings. ### Changed - `NimBLEAdvertising::start` now returns a bool value to indicate success/failure. - Some asserts were removed in `NimBLEAdvertising::start` and replaced with better return code handling and logging. - If a host reset event occurs, scanning and advertising will now only be restarted if their previous duration was indefinite. - `NimBLERemoteCharacteristic::subscribe` and `NimBLERemoteCharacteristic::registerForNotify` will now set the callback regardless of the existence of the CCCD and return true unless the descriptor write operation failed. - Advertising tx power level is now sent in the advertisement packet instead of scan response. - `NimBLEScan` When the scan ends the scan stopped flag is now set before calling the scan complete callback (if used) this allows the starting of a new scan from the callback function. ### Fixed - Sometimes `NimBLEClient::connect` would hang on the task block if no event arrived to unblock. A time limit has been added to timeout appropriately. - When getting descriptors for a characteristic the end handle of the service was used as a proxy for the characteristic end handle. This would be rejected by some devices and has been changed to use the next characteristic handle as the end when possible. - An exception could occur when deleting a client instance if a notification arrived while the attribute vectors were being deleted. A flag has been added to prevent this. - An exception could occur after a host reset event when the host re-synced if the tasks that were stopped during the event did not finish processing. A yield has been added after re-syncing to allow tasks to finish before proceeding. - Occasionally the controller would fail to send a disconnected event causing the client to indicate it is connected and would be unable to reconnect. A timer has been added to reset the host/controller if it expires. - Occasionally the call to start scanning would get stuck in a loop on BLE_HS_EBUSY, this loop has been removed. - 16bit and 32bit UUID's in some cases were not discovered or compared correctly if the device advertised them as 16/32bit but resolved them to 128bits. Both are now checked. - `FreeRTOS` compile errors resolved in latest Arduino core and IDF v3.3. - Multiple instances of `time()` called inside critical sections caused sporadic crashes, these have been moved out of critical regions. - Advertisement type now correctly set when using non-connectable (advertiser only) mode. - Advertising payload length correction, now accounts for appearance. - (Arduino) Ensure controller mode is set to BLE Only. ## [1.0.2] - 2020-09-13 ### Changed - `NimBLEAdvertising::start` Now takes 2 optional parameters, the first is the duration to advertise for (in seconds), the second is a callback that is invoked when advertising ends and takes a pointer to a `NimBLEAdvertising` object (similar to the `NimBLEScan::start` API). - (Arduino) Maximum BLE connections can now be altered by only changing the value of `CONFIG_BT_NIMBLE_MAX_CONNECTIONS` in `nimconfig.h`. Any changes to the controller max connection settings in `sdkconfig.h` will now have no effect when using this library. - (Arduino) Revert the previous change to fix the advertising start delay. Instead a replacement fix that routes all BLE controller commands from a task running on core 0 (same as the controller) has been implemented. This improves response times and reliability for all BLE functions. ## [1.0.1] - 2020-09-02 ### Added - Empty `NimBLEAddress` constructor: `NimBLEAddress()` produces an address of 00:00:00:00:00:00 type 0. - Documentation of the difference of NimBLEAddress::getNative vs the original bluedroid library. ### Changed - notify_callback typedef is now defined as std::function to enable the use of std::bind to call a class member function. ### Fixed - Fix advertising start delay when first called. ## [1.0.0] - 2020-08-22 First stable release. All the original library functionality is complete and many extras added with full documentation.