# parts

moduleID: SparkFun-DigitalIC-PIC16F88-SSOP-
family: sparkfun pic uc
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: PIC 16F8x
label: IC
date: 2013-02-13
path: core/sparkfun-digitalic-pic16f88-ssop-.fzp
description:
<b>PIC 16F8x</b>
8-Bit PIC16F8X Family

<p>Pin Compatible : PIC16F83, PIC16CR83, PIC16F84A, PIC16CR84


moduleID: LilyPad-XBee-v15
family: microcontroller board (lilypad)
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: f.althaus
title: LilyPad XBee
date: 2013-05-25
path: core/LilyPad-XBee-v15.fzp
description:
The LilyPad XBee is a breakout board for the popular XBee modules. Board includes easy-to-sew tabs and all the necessary power regulation to run on the LilyPad system.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

LilyPad XBee was co-developed by Kate Hartman and Rob Faludi. It works with all the popular XBee module types but does not ship with a module. Please see the related items below.

Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles and to Rob Faludi and Kate Hartman for product support and continued development.

Dimensions:

50mm outer diameter
Thin 0.8mm PCB


moduleID: arduinoXbeere
family: arduino shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Arduino
title: Arduino Xbee Libellium Shield
date: 2012-03-10
path: core/arduinoXbeere.fzp
description:
The Xbee shield allows an Arduino board to communicate wirelessly using Zigbee. It is based on the Xbee module from MaxStream. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). It can be used as a serial/usb replacement or you can put it into a command mode and configure it for a variety of broadcast and mesh networking options. The shields breaks out each of the Xbee's pins to a through-hole solder pad. It also provides female pin headers for use of digital pins 2 to 7 and the analog inputs, which are covered by the shield (digital pins 8 to 13 are not obstructed by the shield, so you can use the headers on the board itself).

The Xbee shield was created in collaboration with Libelium, who developed it for use in their SquidBee motes (used for creating sensor networks).


moduleID: SparkFun-Passives-CAP_POL-1206-KIT
family: sparkfun cap (polarized)
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Capacitor Polarized
label: C
date: 2013-02-13
path: core/sparkfun-passives-cap_pol-1206-kit.fzp
description:
<b>Capacitor Polarized</b>
These are standard SMD and PTH capacitors. Normally 10uF, 47uF, and 100uF in electrolytic and tantalum varieties. Always verify the external diameter of the through hole cap, it varies with capacity, voltage, and manufacturer. The EIA devices should be standard.


moduleID: SM130_fix
family: tranceiver
version: 1.1
fritzingversion: 0.3.16b.02.24.4002
author: RapidNFC + F.Althaus
title: SM130
label: IC
path: core/SM130_fix_c427b6f6464a187fb8ed11ae2f2868fc_2.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">SM130 NFC Chip</p></body></html>


moduleID: SparkFun-Connectors-M08-SMD-COMBO
family: sparkfun pin header
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Header 8
label: JP
date: 2013-02-13
path: core/sparkfun-connectors-m08-smd-combo.fzp
description:
<b>Header 8</b>
Standard 8-pin 0.1 header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115).


moduleID: JST-VHR-3N
family: jst vh pin header
version: 5
fritzingversion: 0.9.3.b
author: Stephen G. Parry
title: JST-VHR-3N
label: J
path: core/JST-VHR-3N.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">JST-VHR-3N</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">Female 3 pin connector receptacle from JST VH series</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">This plug is used on Dagu motors in their robots. It is designed to mate with the JST-B3P-VH male header.</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">Note that because of the difference in alignment and spacing, the rear connection and front connection holes are represented as different connectors, with an internal connection between. When plugging onto the male header, ensure that the correct connectors have located.</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Oxygen-Sans'; font-size:10pt;"><br /></p></body></html>


moduleID: a4f38a10-dd92-11dd-a3e2-001f5b3a17a4
family: ic
version: 4
fritzingversion: 0.3.6b.08.14.3340
author: Dirk van Oosterbosch
title: H-Bridge
label: IC
date: 2009-01-08
path: core/h-bridge.fzp
description:
Quadruple Half H-Bridge Motor Driver. Drive two motors with 1.1A with this chip. (SN754410 data sheet from TI here http://focus.ti.com/lit/ds/symlink/sn754410.pdf )


moduleID: SparkFun-DigitalIC-MAX232-PTH
family: sparkfun serial ic
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: RS232 Transceiver
label: U
date: 2013-02-13
path: core/sparkfun-digitalic-max232-pth.fzp
description:
<b>RS232 Transceiver</b>
Very common IC. This is generically called 'MAX232', but works with the 3V equivalent MAX3232 generic ICs. Field tested and mother approved. Spark Fun Electronics SKU : COM-00316 (DIP) and COM-00589 (SMD)


moduleID: 4001_4_x_2_input_NOR_gate_multipart_subpart1
family: 40xx 4x2 input logic gate (multi-part)
version: 4
author: Stephen G. Parry
title: 4001 4 x 2 Input NOR Gate
taxonomy: part.dip.14.pins
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">4001 4 x 2 Input NOR Gate with sub-parts</span></p></body></html>

path:
C:/Users/jnoack/AppData/Roaming/Fritzing/partfactory/1416ce2b2368fabea276407ad0fa4d4f/core/4001_4_x_2_input_NOR_gate_multipart_subpart1.fzp


moduleID: DRV8825_breakout
family: stepper motor driver
version: 2
fritzingversion: 0.7.7b.08.14.6293
author: Bantum Works fix: f.althaus
title: DRV 8825 Stepper Motor Carrier, High Current
label: DRV 8825
path: core/DRV8825_breakout.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">This is a Stepper Motor Controller for integrated circuits.</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">This breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 V to 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling). The driver has a pinout and interface that are nearly identical to those of our <a href="https://www.pololu.com/product/1182"><span style=" text-decoration: underline; color:#0000ff;">A4988 stepper motor driver carriers</span></a>, so it can be used as a higher-performance drop-in replacement for those boards in many applications. This board ships with 0.1″ male header pins included but not soldered in.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">Features :</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">•  </span>Simple step and direction control interface</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">•  </span>Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">•  </span>Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">•  </span>Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">•  </span>45 V maximum supply voltage</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">•  </span>Built-in regulator (no external logic voltage supply needed)</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">•  </span>Can interface directly with 3.3 V and 5 V systems</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">•  </span>Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">•  </span>Short-to-ground and shorted-load protection</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">•  </span>4-layer, 2 oz copper PCB for improved heat dissipation</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">•  </span>Exposed solderable ground pad below the driver IC on the bottom of the PCB</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><br /></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><br /></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><br /></p></body></html>


moduleID: arduino_uno(rev3)-icsp
family: microcontroller board (arduino)
version: 5
fritzingversion: 0.5.2b.02.18.4756
author: althaus
title: Arduino Uno (Rev3) - ICSP
path: core/arduino_uno(rev3)-icsp.fzp
description:
The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2 (Atmega8U2 up to version R2) programmed as a USB-to-serial converter.
Revision 2 of the Uno board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode.
Revision 3 of the board has the following new features:
1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Arduino Due that operate with 3.3V. The second one is a not connected pin, that is reserved for future purposes.
Stronger RESET circuit.
Atmega 16U2 replace the 8U2.
"Uno" means one in Italian and is named to mark the upcoming release of Arduino 1.0. The Uno and version 1.0 will be the reference versions of Arduino, moving forward. The Uno is the latest in a series of USB Arduino boards, and the reference model for the Arduino platform; for a comparison with previous versions, see the index of Arduino boards.


moduleID: tilt-switch-sw200d_1b7c85bbf48b8a3270358749bb53b4c6_1
family: tilt switch
version: 4
fritzingversion: 0.7.2b
author: Sayanee Basu, Leon Lim, f.althaus
title: TILT-SWITCH-SW-200D
label: S
path: core/tilt-switch-sw200d.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'.SF NS Text'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Tilt switch SW-200D</p></body></html>


moduleID: linino_dogrj45
family: microcontroller board (linino)
fritzingversion: 0.9.0b
author: fabian_atlthaus
title: linino dogRJ45
label: linino dogRJ45
date: 2014-06-22
path: core/linino_dogrj45(01).fzp
description:
Designed to meet IEEE 802.3 Fast Ethernet switch with auto-crossover, auto-polarity, and auto-negotiation.
10/100 Mbps Fast Ethernet port basic switch feature including port mirroring, broadcast storm support, flow control in full-duplex, and back pressure in half duplex.


moduleID: SparkFun-Passives-INDUCTOR-0603
family: sparkfun inductor
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Inductors
label: L
date: 2013-02-13
path: core/sparkfun-passives-inductor-0603.fzp
description:
<b>Inductors</b>
Basic Inductor/Choke - 0603 and 1206. Footprints are not proven and vary greatly between part numbers.


moduleID: grove_buzz
family: grove
version: 4
author: Yihui Xiong
title: Grove Buzz
label: Grove
taxonomy: part.dip.8.pins
path: core/seeed_grove_buzz.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'SimSun'; font-size:9pt;">A buzz</span></p></body></html>


moduleID: SparkFun-Displays-7-SEGMENT-4DIGIT-YOUNGSUN-LONGPADS
family: sparkfun led segment display
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: 7-SEGMENT-4DIGIT-YOUNGSUN
label: LED
date: 2013-02-13
path: core/sparkfun-displays-7-segment-4digit-youngsun-longpads.fzp
description:
This is a part for the 4-Digit 7-segment LEDs from Young Sun.  Different from the Digikey LEDs, all 16 pins are used.
The LONGPADS Variant is used for a test jig, but you may like it because there is more pad to solder to. If you are concerned about routing space, the standard works just fine though.


moduleID: JST-B3P-VH
family: jst vh pin header
version: 4
fritzingversion: 0.2.2.b.03.04.2550
author: Stephen G. Parry
title: JST-B3P-VH
label: J
path: core/JST-B3P-VH.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">JST-B3P-VH</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">Male 3 pin header from JST VH series.</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">The female partner connector (JST-VHR-3N) to this is used on Dagu motors in their robots. This part is not breadboard or stripboard friendly - the pin spacings are not properly compatible. However, you can make the part fit by drilling between the tracks for the outer connectors and soldering a trace across them. This can be represented in Frtizing using additional wires. This has the secondary benefit of increasing current carrying capacity.</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Oxygen-Sans'; font-size:10pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">When plugging the female connector onto this, ensure that the correct connectors on the female have located.</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Oxygen-Sans'; font-size:10pt;"><br /></p></body></html>


moduleID: ITG-3200-v11
family: gyroscope breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Triple Axis Gyro Breakout ITG-3200
date: 2011-07-08
path: core/ITG-3200-v11.fzp
description:
<p>


	<strong>Description: </strong>This is a breakout board for InvenSense&#39;s ITG-3200, a groundbreaking triple-axis, digital output gyroscope. The ITG-3200 features three 16-bit analog-to-digital converters (ADCs) for digitizing the gyro outputs, a user-selectable internal low-pass filter bandwidth, and a Fast-Mode I<sup>2</sup>C (400kHz) interface. Additional features include an embedded temperature sensor and a 2% accurate internal oscillator.</p>


<p>


	The ITG-3200 can be powered at anywhere between 2.1 and 3.6V. For power supply flexibility, the ITG-3200 has a separate VLOGIC reference pin (labeled VIO), in addition to its analog supply pin (VDD) which sets the logic levels of its serial interface. The VLOGIC voltage may be anywhere from 1.71V min to VDD max. For general use, VLOGIC can be tied to VCC. The normal operating current of the sensor is just 6.5mA.</p>


<p>


	Communication with the ITG-3200 is achieved over a two-wire (I<sup>2</sup>C) interface. The sensor also features a interrupt output, and an optional clock input. A jumper on the top of the board allows you to easily select the I<sup>2</sup>C address, by pulling the AD0 pin to either VCC or GND; the board is shipped with this jumper tied to VCC. If you don&#39;t plan on using the CLKIN pin, you can short the jumper on the bottom of the board to tie it to GND.</p>


<p>


	This breakout board is shipped as shown in the images. Note that there are two <em>unpopulated</em> resistors on the I<sup>2</sup>C lines, these can be added later by the customer if desired.</p>


<p>


	Not sure which gyro is right for you? Our <a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=167" target="_self">Accelerometer and Gyro Buying Guide</a> might help!</p>


<p>


	<strong>Features:</strong></p>


<ul>


	<li>


		Digital-output X-, Y-, and Z-Axis angular rate sensors (gyros) on one integrated circuit</li>


	<li>


		Digitally-programmable low-pass filter</li>


	<li>


		Low 6.5mA operating current consumption for long battery life</li>


	<li>


		Wide VDD supply voltage range of 2.1V to 3.6V</li>


	<li>


		Standby current: 5&mu;A</li>


	<li>


		Digital-output temperature sensor</li>


	<li>


		Fast Mode I<sup>2</sup>C (400kHz) serial interface</li>


	<li>


		Optional external clock inputs of 32.768kHz or 19.2MHz to synchronize with system clock</li>


	<li>


		Pins broken out to a breadboard friendly 7-pin 0.1&quot; pitch header</li>


</ul>


<p>


	<strong>Dimensions: </strong>0.70 x 0.55&quot; (17.78 x 13.97mm)</p>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Sensors/Gyro/ITG-3200-v10.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/tutorials/265" target="_blank">Quickstart Guide</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Sensors/Gyro/PS-ITG-3200-00-01.4.pdf" target="_blank">ITG-3200 Datasheet</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Sensors/Gyro/IDG-3200-ATmega328-4-30-10.zip" target="_blank">Example Code</a> (ATmega328)</li>


	<li>


		<a href="http://mbed.org/cookbook/ITG-3200-Gyroscope" target="_blank">mbed Example</a></li>


</ul>


moduleID: SPARKCORE_v1_fix
family: microcontroller board (arduino compatible)
version: 5
fritzingversion: 0.5.2b.02.18.4756
author: BDub @ Technobly.com
title: Spark Core (v1.0)
path: core/SPARKCORE_v1_fix.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:7.8pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The Spark Core is a tiny Wi-Fi development board that makes it easy to create internet-connected hardware. The Core is all you need to get started; power it over USB and in minutes you'll be controlling LEDs, switches and motors and collecting data from sensors over the internet!</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">It has 8 digital I/O pins, 8 analog I/O pins, 8 PWM pins; UART (Serial), SPI, I2C, and JTAG peripherals available. Programmed wirelessly (through Spark Cloud), via USB or JTAG. 3.3VDC supply voltage (on board power regulator); can be powered by USB Micro 100mA typical current consumption; 300mA peak consumption (during transmit events). 2MB of external flash; EEPROM supplied by CC3000. STM32F103 microcontroller, ARM Cortex M3 architecture, 32-bit 72Mhz processor, 128KB of Flash, 20KB of RAM.</p></body></html>


moduleID: SparkFun-Connectors-M02-4UCON-15767
family: sparkfun pin header
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Header 2
label: JP
date: 2013-02-13
path: core/sparkfun-connectors-m02-4ucon-15767.fzp
description:
<b>Header 2</b>
Standard 2-pin 0.1 header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). Molex polarized connector foot print use with SKU : PRT-08233 with associated crimp pins and housings.


moduleID: SparkFun-Electromechanical-STAND-OFF-
family: sparkfun stand off
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: #4 Stand Off
label: JP
date: 2013-02-13
path: core/sparkfun-electromechanical-stand-off-.fzp
description:
<b>#4 Stand Off</b><p>
This is the mechanical footprint for a #4 phillips button head screw. Use the keepout ring to avoid running the screw head into surrounding components. SKU : PRT-00447


moduleID: bareconductive_touchboard
family: microcontroller board
version: 5
fritzingversion: 0.9.0b.02.18.4756
author: pedro cushe and fabian althaus
title: Bare Conductive Touch Board
path: core/bareconductive_touchboard.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'.Lucida Grande UI'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The Touch Board is a microcontroller board based on the ATmega32u4.</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Use the Touch Board to change the world around you by turning almost any material or surface into a sensor. Connect anything conductive to one of its 12 electrodes and trigger a sound via its onboard MP3 player, play a MIDI note or do anything else that you might do with an Arduino or Arduino-compatible device.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The Touch Board is designed as an easy-to-use platform for a huge range of projects, whether it’s painting a lightswitch on your wall, making a paper piano or creating a custom interactive surface.</p></body></html>


moduleID: 4001_4_x_2_input_NOR_gate_single
family: 40xx 4x2 input logic gate (single part)
version: 4
author: Stephen G. Parry
title: 4001 4 x 2 Input NOR Gate, single part
label: IC
taxonomy: part.dip.14.pins
path: core/4001_4_x_2_input_NOR_gate_single.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">4001 4 x 2 Input NOR Gate as a single part</span></p></body></html>


moduleID: 4081_4_x_2_input_AND_gate_multipart_subpart2
family: 40xx 4x2 input logic gate (multi-part)
version: 4
author: Stephen G. Parry
title: 4081 4 x 2 Input AND Gate, multi-part
label: 1
taxonomy: part.dip.14.pins
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">4081 4 x 2 Input AND Gate with sub-parts</span></p></body></html>

path:
C:/Users/jnoack/AppData/Roaming/Fritzing/partfactory/1416ce2b2368fabea276407ad0fa4d4f/core/4081_4_x_2_input_AND_gate_multipart_subpart2.fzp


moduleID: 4071_4_x_2_input_OR_gate_multipart_subpart4
family: 40xx 4x2 input logic gate (multi-part)
version: 4
author: Stephen G. Parry
title: 4071 4 x 2 Input OR Gate, multi-part
label: 3
taxonomy: part.dip.14.pins
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">4071 4 x 2 Input OR Gate with sub-parts</span></p></body></html>

path:
C:/Users/jnoack/AppData/Roaming/Fritzing/partfactory/1416ce2b2368fabea276407ad0fa4d4f/core/4071_4_x_2_input_OR_gate_multipart_subpart4.fzp


moduleID: AnalogDevices_ADTL082ARZ_subpart1
family: adi-opamp-dual
version: 4
fritzingversion: 0.7.12b.02.13.6882
author: Analog Devices
title: ADTL082 - Dual JFET Input Op Amps
label: 1
spice:
X{instanceTitle}A {net connector3} {net connector2} {net connector8} {net connector4} {net connector1} ADTL082
X{instanceTitle}B {net connector5} {net connector6} {net connector8} {net connector4} {net connector7} ADTL082

path:
C:/Users/jnoack/AppData/Roaming/Fritzing/partfactory/1416ce2b2368fabea276407ad0fa4d4f/core/AnalogDevices_ADTL082ARZ_subpart1.fzp


moduleID: SparkFun-DigitalIC-AVR-MEGA8--AI
family: sparkfun atmega
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: MICROCONTROLLER
label: U$
date: 2013-02-13
path: core/sparkfun-digitalic-avr-mega8--ai.fzp
description:
<b>MICROCONTROLLER</b><p>
8 Kbytes FLASH<p>
1 kbytes SRAM<p>
512 bytes EEPROM<p>
USART<p>
6-channel 10 bit ADC<p>
2-channel 8 bit ADC


moduleID: Dagu_DGServo_9g_PCB_mounting_holes
family: dagu dgservo 9g
version: 4
author: Stephen Parry
title: Dagu DGServo 9g PCB mounting holes
label: M
taxonomy: discreteParts.servo
path: core/Dagu DGServo 9g PCB mounting holes.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Dagu DGServo 9g PCB mounting holes</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">This PCB view only part provides just the holes for physically mounting the whole Dagu DGServo 9g through the PCB.</span></p>
</body></html>


moduleID: EspruinoPico_8fb644a5b6642112445ed6d90bc494d8_6
family: //obsolete//espruino
version: 5
replacedby: EspruinoPico
fritzingversion: 0.5.2b.02.18.4756
author: Gordon Williams
title: Espruino Pico
path: obsolete/EspruinoPico_8fb644a5b6642112445ed6d90bc494d8_6.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Verdana,Trebuchet MS,Arial,sans-serif'; font-size:8pt; color:#666666; background-color:#ffffff;">Espruino is an Interactive JavaScript interpreter for Microcontrollers, so you can program them quickly and easily. The Espruino Pico is a specially designed board with Espruino software pre-installed. It complements the Espruino software with masses of functionality and great battery life.</span></p></body></html>


moduleID: RGB_matrix_v25
family: display
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: LED Matrix - Serial Interface - Red/Green/Blue
date: 2011-07-08
path: core/RGB_matrix_v25.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> This is a large sized RGB LED Matrix with a backpack that has been designed to take SPI serial input and display any graphics you pass it. All the refreshing and communication control is taken care of by the backpack. It&#39;s even reprogrammable! 7 software selectable colors are available!<br />


	<br />


	Unit comes with a Red/Green/Blue LED Matrix assembled with a RGB Matrix Backpack Controller.<br />


	<br />


	Check out the <a classname="" href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=91" name="" target="_blank">LED Coffee Table</a> tutorial!<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/rgbmatrixbackpack_userguide.pdf" name="" target="_blank">Matrix Backpack Controller Datasheet</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/RGB_Backpack_v4.zip" name="" target="">RGB Serial Matrix Firmware</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/Code/RGB_Sample_Interface_Code.zip" name="" target="">Sample Interface Code</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/Code/RGBMatrixBackpackSketch.zip" name="" target="_blank">Sample Arduino Sketch</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/RGB_matrix_v25.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/YSM-2388CRGBC.pdf" name="" target="_blank">Triple Color LED Matrix Datasheet</a></li>


</ul>


<p>


	<span style="font-weight: bold;">Example Projects:</span></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Components/LED_MATRIX_CODE.zip" target="_blank">Example Software for older RGB Serial Matrix</a></li>


	<li>


		<a classname="" href="http://wiring.org.co/learning/basics/rbgbackpack.html" name="" target="_blank">Wiring Example</a></li>


	<li>


		<a href="http://www.nokinomo.com/films/films.php?Id=13" target="_blank">Example deployment</a> by Nokinomo</li>


	<li>


		<a classname="" href="http://www.youtube.com/watch?v=hEKEM6ZOsZE" name="" target="_blank">Example Project</a> by Mr. Nick Hall</li>


	<li>


		<a classname="" href="http://www.halfmachine.dk/posts/60" name="" target="_blank">Ladies and Mens Room Mixup</a> by Vanessa Carpenter</li>


	<li>


		<a href="http://www.sparkfun.com/tutorials/44">Ethernet LED Matrix</a> tutorial by Owen Osborn</li>


</ul>


<p>


	<br />


	<span style="font-weight: bold;">Dimensions:</span></p>


<ul>


	<li>


		2.38x2.38&quot; square</li>


	<li>


		Max width of backpack including connector pins - 1.1&quot;</li>


</ul>


moduleID: SparkFun-Sensors-MMA7260-
family: sparkfun accelerometer
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: MMA7260
label: U
date: 2013-02-13
path: core/sparkfun-sensors-mma7260-.fzp
description:
Freescale 3-axis 1.5/2/4/6g analog output accelerometer.<BR>
Schematic element and footprint production proven. Center pad has reduced paste layer for solder short reduction. Spark Fun Electronics SKU : COM-00308


moduleID: USBHostShield-v13
family: usb shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino USB Host Shield
date: 2011-07-08
path: core/USBHostShield-v13.fzp
description:
<p>


	<strong>Description:&nbsp; </strong>This new version corrects the pin out for the GPX and RESET pins. The USB Host Shield contains all of the digital logic and analog circuitry necessary to implement a full-speed USB peripheral/host controller with your Arduino. This means you could use your Arduino to interface with and control any USB slave device - thumbdrives, digital cameras, bluetooth dongles, and much more!</p>


<p>


	A four-wire serial interface is used to communicate with the host controller chip, so the shield connects the Arduino&#39;s hardware SPI pins (D10-13) to the MAX3421E. A USB type A female connector is wired up to the IC, and it also supplies 5V as any normal USB port would.</p>


<p>


	The Host Shield takes its power from the &#39;Vin&#39; pin on your Arduino. Power from that pin is regulated to both 5V and 3.3V on the shield. All SPI signals are sent through a hex converter to step them down to 3.3V.</p>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/USBHostShield-v13.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/USBHostShield-v13.zip">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/MAX3421E.pdf" target="_blank">Datasheet</a> (MAX3421E)</li>


	<li>


		<a href="http://www.circuitsathome.com/arduino_usb_host_shield_projects" target="_blank">Projects and Code</a> (Thanks Oleg!)</li>


</ul>


<p>


	<strong>Replaces:</strong> <a href="http://www.sparkfun.com/commerce/product_info.php?products_id=9628" target="_blank">DEV-09628</a></p>


moduleID: Arduino Voice Shield-v16
family: voice shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino Voicebox Shield (Stephen Hawking in a box)
date: 2011-07-08
path: core/Arduino Voice Shield-v16.fzp
description:
<p>


	<span style="font-weight: bold;">Description: </span>The VoiceBox Shield can be mounted on top of your <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=666" name="" target="_self">Arduino USB Board</a> or <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9219" name="" target="_self">Pro</a>, to give it access to all capabilities of the <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9578" name="" target="_self">SpeakJet</a> voice and sound synthesizer. <span class="description">The Voice Box Shield uses the SpeakJet chip to convert serial commands into a great robot-sounding voice.</span><br />


	<br />


	Populated on the VoiceBox Shield are the 18-DIP SpeakJet IC and a two stage audio amplifier with a potentiometer to set the gain. You can connect a speaker directly to the &#39;SPK+/-&#39; pins, and get your Arduino-bot talking with very minimal work!<br />


	<br />


	You can control the SpeakJet through either its serial line, or the eight event input lines which are connected to digital pins 5-12. A 3-way jumper allows you to connect either the software (D2) or hardware (D1) TX pin of the Arduino to the SpeakJet&#39;s serial input.<br />


	<br />


	Also included on the shield are a 13x7 grid of 0.1&quot; pitch through-holes for prototyping, the Arduino&#39;s reset button. Headers are not included, we recommend the <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9280" name="" target="_self">6</a> and <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9279" name="" target="_self">8-pin stackable headers</a>.<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/Arduino%20Voice%20Shield-v13.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/Code/SpeakJet_Sample.zip" name="" target="_blank">Example Code</a></li>


	<li>


		<a classname="" href="http://www.youtube.com/watch?v=Eo3hEKAOxeg" name="" target="_blank">Listen to the SpeakJet!</a> (YouTube)</li>


	<li>


		<a classname="" href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=158" name="" target="_blank">Talking Wireless Server Tutorial</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/General/speakjet-usermanual.pdf" name="" target="_blank">SpeakJet User&#39;s Guide</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/General/SpeakJet-dictionary.zip" name="" target="_blank">SpeakJet Dictionary</a></li>


	<li>


		<a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=166" target="_blank">Tutorial </a>on adding the TTS256 text to speech IC to the shield</li>


</ul>


<p>


	<strong>Replaces: </strong><a href="http://www.sparkfun.com/commerce/product_info.php?products_id=9624" target="_self">DEV-09624</a></p>


moduleID: SparkFun-PowerIC-V_REG_TPS76433-SOT23-5
family: sparkfun voltage regulator
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Voltage Regulator
label: IC
date: 2013-02-13
path: core/sparkfun-poweric-v_reg_tps76433-sot23-5.fzp
description:
<b>Voltage Regulator</b>
Older TI part. LDO 150mA regulator. No output by-pass cap option. See V_REG_LDO for a better part.


moduleID: SparkFun-RF-LASSEN_IQ_GPS-LASSEN
family: sparkfun gps module
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: LASSEN_IQ_GPS
label: U
date: 2013-02-13
path: core/sparkfun-rf-lassen_iq_gps-lassen.fzp
description:
Lassen iq 
12-Channel GPS receiver. Schematic and footprint production proven. Spark Fun Electronics SKU : GPS-00163. Surface mount mating connector : GPS-00170


moduleID: 1e03b5a1-ed62-11dd-b332-001a4d5c439f
family: //obsolete//mystery part
version: 1
replacedby: mystery_part_14
author: Fritzing Part-o-matic
title: Mystery Part - 14 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.14pins
path: obsolete/mystery_part14.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 14 pins on a 100 mil inline pin header footprint.


moduleID: P1000K_standup
family: diode
version: 4
fritzingversion: 0.1.beta.1396
author: nail
title: P1000K
label: D
path: core/Rectifier Diode 10A_standup_on_PCB.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">A standard rectifier diode 10A</p></body></html>


moduleID: prefix0000_SFE-SEN-11084_05654ad87c1390d7ff5c5e6a1ba23294_6
family: //obsolete//weather
version: 4
replacedby: MPL3115A2
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun and Fritzing Part-o-matic
title: Altitude/Pressure Sensor - MPL3115A2 Breakout
label: Part
path: obsolete/prefix0000_SFE-SEN-11084_05654ad87c1390d7ff5c5e6a1ba23294_6.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Life has its ups and downs, so why not measure them? The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (with oversampling enabled). The sensor outputs are digitized by a high resolution 24-bit ADC and transmitted over I2C, meaning it's easy to interface with most controllers. Pressure output can be resolved with output in fractions of a Pascal, and Altitude can be resolved in fractions of a meter. The device also provides 12-bit temperature measurements in degrees Celsius.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">This breakout board makes it easy to prototype using this tiny device by breaking out the necessary pins to a standard 0.1&quot; spaced header. The board also has all of the passive components needed to get the device functioning, so you can simply connect it to something that talks I2C and get to work!</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Features:</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">1.95V to 3.6V Supply Voltage, internally regulated by LDO</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">1.6V to 3.6V Digital Interface Supply Voltage</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Fully Compensated internally</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Direct Reading, Compensated</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Pressure: 20-bit measurement (Pascals)</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Altitude: 20-bit measurement (meters)</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Temperature: 12-bit measurement (degrees Celsius)</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Programmable Events</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Autonomous Data Acquisition</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Resolution down to 1 ft. / 30 cm</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">32 Sample FIFO</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Ability to log data up to 12 days using the FIFO</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">1 second to 9 hour data acquisition rate</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">I2C digital output interface (operates up to 400 kHz)</p></body></html>


moduleID: SparkFun-Electromechanical-TAC_SWITCH-SMD
family: sparkfun push button
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Momentary Switch
label: S
date: 2013-02-13
path: core/sparkfun-electromechanical-tac_switch-smd.fzp
description:
<b>Momentary Switch</b>
Button commonly used for reset or general input. Spark Fun Electronics SKU : COM-00097


moduleID: Shield_Eth06-PoE
family: arduino shield
version: 5
fritzingversion: 0.5.2b.02.18.4756
author: fabian althaus
title: Arduino Ethernet Shield (Rev3)
date: 2013-05-22
path: core/Shield_Eth06-PoE.fzp
description:
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip (datasheet). The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.

The most recent revision of the board exposes the 1.0 pinout on rev 3 of the Arduino UNO board.

The Ethernet Shield has a standard RJ-45 connection, with an integrated line transformer and Power over Ethernet enabled.


moduleID: daf5c6f3ee7e6da72522d1ea59fca803_65
family: relay
version: 4
fritzingversion: 0.3.6b.08.14.3340
author: nail
title: CAR RELAY
label: RELAY
path: core/CAR_RELE_NVF4-2.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p></body></html>


moduleID: Breadboard Power Supply - SMD v12
family: power conditioning
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Breadboard Power Supply Board SMD
date: 2011-11-16
path: core/Breadboard Power Supply - SMD v13.fzp
description:
<p>


	<b>Description: </b>This is a very simple board that takes a 6-12V input voltage and outputs a selectable 5V or 3.3V regulated voltage. All headers are 0.1&quot; pitch for simple insertion into a breadboard.</p>


<p>


	Input power can be supplied to either the DC barrel jack or the two pin header labeled + and -. Output power is supplied to the pins labeled GND and VCC. Board has both an On/Off switch and a voltage select switch (3.3V/5V).&nbsp;</p>


<p>


	The two pairs of GND and VCC pins are spaced such that when connected to our <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=112" name="" target="">Basic Breadboard</a> both power busses will be powered.</p>


<p>


	Check out our <a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=103" target="_blank">Unregulated Power Supply Tutorial</a>!</p>


<p>


	<b>Dimensions:</b> 2.15x0.65&quot;</p>


<p>


	<span style="font-weight: bold;">Features:</span></p>


<ul>


	<li>


		6-12V input voltage via barrel jack or 2-pin header</li>


	<li>


		3.3V or 5V regulated output voltage</li>


	<li>


		ON/OFF switch</li>


	<li>


		Output voltage select switch</li>


	<li>


		Power status LED</li>


	<li>


		PTC fuse protected power</li>


	<li>


		5.5x2.1mm center positive barrel jack</li>


</ul>


<p>


	<b>Documents:</b></p>


<ul>


	<li>


		<a classname="" href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Prototyping/Breadboard Power Supply - SMD v13.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Prototyping/Breadboard Power Supply - SMD v13.zip" target="_blank">Eagle Files</a></li>


</ul>


<p>


	<strong>Replaces: </strong><a href="http://www.sparkfun.com/products/9319" target="_blank">PRT-09319</a></p>




moduleID: SparkFun-Passives-SOLDERJUMPER-OLD-NC
family: sparkfun pcb jumper (solder)
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Solder Jumper
label: SJ
date: 2013-02-13
path: core/sparkfun-passives-solderjumper-old-nc.fzp
description:
<b>Solder Jumper</b>
Standard SMD solder jumper. Used to automate production. Two varients : Normally Open and Normally Closed are the same, but have different paste layers. NC will have a large amount of paste and should jumper during reflow.


moduleID: EasyDriver_v44
family: motor driver
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: EasyDriver_v44
date: 2011-07-10
path: core/EasyDriver_v44.fzp
description:
<p>

	<strong>Replacement:</strong> <a href="http://www.sparkfun.com/products/10267" target="_blank">ROB-10267</a>. The new version fixes the silkscreen error. This page is for reference only.</p>

<p>

	<span style="font-weight: bold;">Description:</span> The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse. EasyDriver requires a 7V to 30V supply to power the motor, and has an on board voltage regulator for the digital interface. Connect a 4-wire stepper motor and a microcontroller and you&#39;ve got precision motor control! EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors.</p>

<p>

	This is the newest version of EasyDriver V4 co-designed with <a classname="" href="http://www.schmalzhaus.com/" name="" target="_blank">Brian Schmalz</a>. It provides much more flexibility and control over your stepper motor, when compared to older versions.&nbsp;The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.<br />

	<br />

	<span style="font-weight: bold;">Caution:</span> Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.</p>

<p>

	<strong>Note:</strong> Version 4.3 of the PCB has an error on the Current Adjustment silkscreen. The Min/Max labels are reversed. The correct direction for maximum current is counter-clockwise.<br />

	<br />

	<span style="font-weight: bold;">Features:</span></p>

<ul>

	<li>

		A3967 microstepping driver</li>

	<li>

		MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eigth steps</li>

	<li>

		Compatible with 4, 6, and 8 wire stepper motors</li>

	<li>

		Adjustable current control from 150mA/phase to 750mA/phase</li>

	<li>

		Power supply range from 7V to 30V. The higher the voltage, the higher the torque.</li>

</ul>

<p>

	<span style="font-weight: bold;">Documents:</span></p>

<ul>

	<li>

		<a classname="" href="http://www.sparkfun.com/datasheets/Robotics/EasyDriver_v43.pdf" name="" target="_blank">Schematic</a></li>

	<li>

		<a href="http://www.sparkfun.com/datasheets/Robotics/A3967.pdf" target="_blank">A3967 Datasheet</a></li>

	<li>

		<a classname="" href="http://schmalzhaus.com/EasyDriver/" name="" target="_blank">EasyDriver Website</a></li>

	<li>

		Example <a classname="" href="http://www.tigoe.net/pcomp/code/circuits/motors/controlling-dc-motors" target="_blank">Stepper Motor Control</a></li>

	<li>

		Example <a classname="" href="http://lusorobotica.com/index.php/topic,106.0.html" name="" target="_blank">Arduino Tutorial</a> in Portuguese</li>

</ul>

<p>

	&nbsp;</p>

<ul>

</ul>


moduleID: Molex-Picoblade-53398-0471_smd-4p-v_ff7ee55271fd60f773a12915377b70da_16
family: //obsolete//molex picoblade
version: 4
replacedby: Molex-Picoblade-53398-0471_smd-4p-v
fritzingversion: 0.7.2b
author: Stephen Lilley
title: Molex Picoblade Series Header
label: U
path: obsolete/Molex-Picoblade-53398-0471_smd-4p-v_16.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt; font-weight:600;">Molex Picoblade Header:</span><span style=" font-size:8pt;"> 1.25mm Pitch Miniature Crimping Connector. Single Row Straight Pin Header (SMT)</span></p></body></html>


moduleID: chipkit_BasicIOShield
family: chipkit
version: 4
author: Amber Mear/Digilent Inc.
title: chipKIT Basic I/O Shield
label: Basic IO Shield
taxonomy: part.dip.44.pins
path: core/chipkit_BasicIOShield.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Arial,Geneva,Verdana,Helvetica'; font-size:14px; color:#000000; background-color:#fffffd;">The chipKIT Basic I/O Shield is an input/output expansion board designed for use with chipKIT microcontroller boards such as the Uno32™ and the Max32™.  The Basic I/O Shield is designed to provide a range of input/output devices suitable for beginners learning about microcontrollers and various types of I/O devices, or for use by more advanced user to provide inputs or outputs for their own projects.  The Basic I/O Shield provides simple digital input devices such as switches and buttons, and digital output devices such as discrete LEDs and high current open FET drivers. It provides more advanced devices such as an I</span><span style=" font-family:'Arial,Geneva,Verdana,Helvetica'; color:#000000; background-color:#fffffd;">2</span><span style=" font-family:'Arial,Geneva,Verdana,Helvetica'; font-size:14px; color:#000000; background-color:#fffffd;">C EEPROM, an I</span><span style=" font-family:'Arial,Geneva,Verdana,Helvetica'; color:#000000; background-color:#fffffd;">2</span><span style=" font-family:'Arial,Geneva,Verdana,Helvetica'; font-size:14px; color:#000000; background-color:#fffffd;">C temperature sensor, and organic LED graphic display. A potentiometer is also provided for use as an analog input device. </span></p></body></html>


moduleID: SparkFun-Connectors-USB--MICROB
family: sparkfun usb connector
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: USB Connectors
label: X
date: 2013-02-13
path: core/sparkfun-connectors-usb--microb.fzp
description:
<b>USB Connectors</b>
<p>USB-B-PTH is fully proven SKU : PRT-00139
<p>USB-miniB is fully proven SKU : PRT-00587
<p>USB-A-PCB is untested.
<p>USB-A-H is throughly reviewed, but untested. Spark Fun Electronics SKU : PRT-00437
<p>USB-B-SMT is throughly reviewed, but untested. Needs silkscreen touching up.
<p>USB-A-S has not been used/tested
<p>USB-MB-H has not been used/tested


moduleID: TE_RELAY
family: te general purpose relays
version: 5
fritzingversion: 0.7.2b
author: www.squarewolf.nl, f.althaus
title: RELAY
label: U
path: core/TE_RELAY.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'.SF NS Text'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">SPST relay</p></body></html>


moduleID: prefix0000_642e08dceb3d1de4c31ea2bcfb635c6f_1
family: ph sensor
version: 4
fritzingversion: 0.9.3b
author: Peter Van Epp (vanepp in forums)
title: PH meter
label: S
path: core/DFRobot-PH-sensor.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">DFrobot PH meter (SKU SEN0161)</p></body></html>


moduleID: jlpcb-089
family: carrier card
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Jean-Claude Wippler
title: Carrier Card expansion area
date: 2011-12-04
path: core/jlpcb-089.fzp
description:
The Carrier Card is a prototype board for use with the Carrier Board. This Carrier Card can be separated into two parts. Both parts have a series of +3V pins along their left edge and a series of GND pins along their right edge. All the header pins on the top row are labeled and connected to a free hole below. There's a mounting hole to fasten the right side to the center of the bottom ABS shell.


moduleID: SparkFun-DiscreteSemi-DIODE-SMA-KIT
family: sparkfun diode
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Diode
label: D
date: 2013-02-13
path: core/sparkfun-discretesemi-diode-sma-kit.fzp
description:
<b>Diode</b>
These are standard reverse protection diodes and small signal diodes. SMA package can handle up to about 1A. SOD-323 can handle about 200mA. What the SOD-323 package when ordering, there are some mfgs out there that are 5-pin packages.


moduleID: Arduino DUE V02b
family: microcontroller board (arduino)
version: 5
fritzingversion: 0.5.2b.02.18.4756
author: althaus
title: Arduino Due (Rev2b)
path: core/Arduino_DUE_V02b.fzp
description:
The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU (datasheet). It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button.



Warning: Unlike other Arduino boards, the Arduino Due board runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Providing higher voltages, like 5V to an I/O pin could damage the board.



The board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it with a AC-to-DC adapter or battery to get started. The Due is compatible with all Arduino shields that work at 3.3V and are compliant with the 1.0 Arduino pinout.



The Due follows the 1.0 pinout:



    TWI: SDA and SCL pins that are near to the AREF pin.

    The IOREF pin which allows an attached shield with the proper configuration to adapt to the voltage provided by the board. This enables shield compatibility with a 3.3V board like the Due and AVR-based boards which operate at 5V.

    An unconnected pin, reserved for future use. 



The Due has a dedicated forum for discussing the board.


moduleID: SparkFun-Connectors-POWER_JACK-SLT
family: sparkfun power jack
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Power Jack
label: J
date: 2013-02-13
path: core/sparkfun-connectors-power_jack-slt.fzp
description:
<b>Power Jack</b>
This is the standard 5.5mm barrel jack for power. The PTH is the most common, proven, reliable, footprint. All others are experimental. The Slot footprint only works if the mill layer is transmitted to the PCB fab house so be warned. Spark Fun Electronics SKU : PRT-00119. Mating wall wart : TOL-00298 (and others)


moduleID: MPX4250AP_60bfc397c54bae166e67461339be2ca8_4
family: motorola
fritzingversion: 0.7.0b.02.01.5801
author: Andre van Ooijen - Old Grey mod
title: MPX4250AP pressure sensor
label: MPX4250AP
path: core/MPX4250AP pressure sensor.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">MPX4250AP - MPX4250A SERIES Motorola Preferred Device</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">Integrated Silicon Pressure Sensor</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">Manifold Absolute Pressure Sensor</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">On-Chip Signal Conditioned,</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">Temperature Compensated and</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">Calibrated</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">The MPX4250A series piezoresistive transducer is a state-of-the-art</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">monolithic silicon pressure sensor designed for a wide range of applications,</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">particularly those employing a microcontroller or microprocessor with A/D</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">inputs. This transducer combines advanced micromachining techniques, thinfilm</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">metallization and bipolar processing to provide an accurate, high-level</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">analog output signal that is proportional to the applied pressure. The small</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">form factor and high reliability of on-chip integration make the Freescale</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">sensor a logical and economical choice for the automotive system engineer.</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">Features</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">• 1.5% Maximum Error Over 0° to 85°C</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">• Specifically Designed for Intake Manifold Absolute Pressure Sensing in Engine Control Systems</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">• Patented Silicon Shear Stress Strain Gauge</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">• Temperature Compensated Over -40° to +125°C</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">• Offers Reduction in Weight and Volume Compared to Existing Hybrid Modules</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">• Durable Epoxy Unibody Element or Thermoplastic Small Outline, Surface Mount Package</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">• Ideal for Non-Automotive Applications</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">10 kPa On-Chip Temperature Compensated &amp; Calibrated Silicon Pressure Sensors.</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">The MPX2010/MPXV2010G series silicon piezoresistive pressure sensors provide a very</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">accuate and linearvoltage output — directly proportional to the applied pressure.</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">These sensors house a single monolithic silicon die with the strain gauge and thin–film resistor network integrated on each chip.</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">The sensor is laser trimmed for precise span, offset calibration and temperature compensation.</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">Features</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">• Temperature Compensated over 0°C to +85°C</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">• Ratiometric to Supply Voltage</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">• Differential and Gauge Options</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">Application Examples</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">• Respiratory Diagnostics</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">• Air Movement Control</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">• Controllers</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">• Pressure Switching</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"><br /></p></body></html>


moduleID: SparkFun-RF-WLANMODULE-
family: sparkfun wi-fi module
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: DPAC WiFi Module
label: U
date: 2013-02-13
path: core/sparkfun-rf-wlanmodule-.fzp
description:
<b>DPAC WiFi Module</b>
Footprint for DPAC wireless module. Not fully tested so double check it. Spark Fun Electronics SKU : (Module) WRL-00665, (Connector) WRL-00673


moduleID: SparkFun-Connectors-MINI-DIN6-PTH
family: sparkfun mini-din connector
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: mini DIN 6 Connector
label: U
date: 2013-02-13
path: core/sparkfun-connectors-mini-din6-pth.fzp
description:
<b>mini DIN 6 Connector</b>
Commonly found on the back of a computer for PS2 keyboard and mice. Schematic and footprint are proven. Spark Fun Electronics SKU : PRT-08509


moduleID: SparkFun-DiscreteSemi-XN04312-SOT
family: sparkfun npn/pnp transistor array
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: NPN_PNP Transistor Array
label: U
date: 2013-02-13
path: core/sparkfun-discretesemi-xn04312-sot.fzp
description:
<b>NPN/PNP Transistor Array</b>
Handy dandy transistor array for level shifting and inverting signals. Spark Fun Electronics SKU : COM-00588


moduleID: SparkFun-DigitalIC-FT245RL-
family: sparkfun usb ic
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: USB FIFO Controller
label: U
date: 2013-02-13
path: core/sparkfun-digitalic-ft245rl-.fzp
description:
<b>USB FIFO Controller</b>
4<sup>th</sup> Generation USB Controller (USB &lt;-&gt; Parallel) - FIFO. Spark Fun Electronics SKU : COM-00787


moduleID: SparkFun-RF-GE863_GPS-
family: sparkfun gps
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: GE863 Cellular Module with GPS
label: U
date: 2013-02-13
path: core/sparkfun-rf-ge863_gps-.fzp
description:
<b>GE863 Cellular Module with GPS</b>
Proto layout and schematic for GE863 cellular module with SiRF III GPS. Spark Fun Electronics SKU : CEL-08246


moduleID: microsdmodule
family: microsd
version: 5
fritzingversion: 0.5.2b.02.18.4756
author: Richard Bruneau, F.Althaus
title: MicroSD Card Module
label: microSD
path: core/microsdmodule.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">A common microSD card module.</p></body></html>


moduleID: atlas-sientific_ORP Circuit
family: orp
fritzingversion: 0.4.1b.07.17.4356
author: Atlas Scientific
title: ORP Circuit
label: ORP Circuit
path: core/atlas-sientific_ORP Circuit.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">Atlas Scientific specializes in merging the biological sciences with modern day embedded computer science. Atlas Scientific engineers understand the complexities of biology, modern embedded computer systems and the strict level of accuracy needed to take true scientific grade readings. Oxidation Reduction Potential (ORP) is a part of electrochemistry that is complex and commonly misunderstood. This made finding an ORP Circuit virtually impossible. The Atlas Scientific ORP Circuit (our fourth generation ORP Circuit) has put an end to this problem. Now, the engineer can easily incorporate a modern ORP Circuit into a design without having to learn complex chemistry and analog signal processing. With a wide operating voltage (2.5V to 5.5V) and a simple asynchronous serial communication protocol, this easy to use ORP Circuit is specifically designed for modern embedded computer systems.</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">The Atlas Scientific ORP Circuit is designed for both continuous and intermittent readings. After calibration, the ORP Sensor can be immersed in a liquid and operate continuously for 12 months before recalibration is recommended.</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Full range ORP reading from 0 to +1024 and –1024 mV</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Accuracy within two significant figures (XX.XX)</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Calibration not required</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Single reading or continuous reading modes</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Simple calibration protocol</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Simple asynchronous serial connectivity (voltage swing 0-VCC)</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Simple instruction set consisting of only nine commands</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Micro footprint circuitry</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Debugging LED's</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• 2.5V to 5.5V operational voltage</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Low power consumption</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Dimensions: 14mm X 20.16mm (0.55&quot; X0.79&quot;) </span></p></body></html>


moduleID: Arduino-Pro-Mini-v11
family: //obsolete//microcontroller board (arduino)
version: 4
replacedby: Arduino-Pro-Mini-v13
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino Pro Mini 3.3V
date: 2011-07-08
path: obsolete/Arduino-Pro-Mini-v11.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> It&#39;s blue! It&#39;s thin (0.8mm)! It&#39;s the Arduino Pro Mini! SparkFun&#39;s minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader (select &#39;Arduino Duemilanove w/ 328&#39; within the Arduino software). Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Duemilanove. It&#39;s a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (3.3V), lack of connectors, and USB off board.</p>


<p>


	We really wanted to minimize the cost of an Arduino. The Arduino Pro Mini is like the Arduino Mini (same pin out) but to keep the cost low, we used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work.</p>


<p>


	Can&#39;t decide which Arduino is right for you? <a classname="" href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=148" name="" target="">Arduino buying guide</a>!</p>


<p>


	<span style="font-weight: bold;">Features:</span></p>


<ul>


	<li>


		ATmega328 running at 8MHz with external resonator (0.5% tolerance)</li>


	<li>


		Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, accelerometers, sensors, etc)</li>


	<li>


		USB connection off board</li>


	<li>


		Supports auto-reset</li>


	<li>


		3.3V regulator</li>


	<li>


		Max 150mA output</li>


	<li>


		Over current protected</li>


	<li>


		Reverse polarity protected</li>


	<li>


		DC input 3.3V up to 12V</li>


	<li>


		On board Power and Status LEDs</li>


</ul>


<p>


	<span style="font-weight: bold;">Dimensions:</span></p>


<ul>


	<li>


		0.7x1.3&quot; (18x33mm)</li>


	<li>


		Less than 2 grams</li>


</ul>


<p>


	<span style="font-weight: bold;">Documents: </span></p>


<ul>


	<li>


		<a classname="" href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Boards/Arduino-Pro-Mini-v12.pdf" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Boards/Arduino-Pro-Mini-v12.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a classname="" href="http://www.arduino.cc/en/Main/ArduinoBoardProMini" name="" target="_blank">Arduino Pro Mini Homepage</a></li>


	<li>


		<a classname="" href="http://www.arduino.cc/en/Guide/ArduinoProMini" name="" target="_blank">Getting Started Tutorial</a></li>


</ul>


moduleID: MIDI_Shield-v13
family: music shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino Midi Shield
date: 2011-07-08
path: core/MIDI_Shield-v13.fzp
description:
<p>


	<span style="font-weight: bold;">Description: </span>The MIDI Shield board gives your Arduino access to the powerful <a classname="" href="http://en.wikipedia.org/wiki/Musical_Instrument_Digital_Interface" name="" target="_blank">MIDI communication protocol</a>, so you can control synthesizers, sequencers, and other musical devices. The MIDI protocol shares many similarities with standard asynchronous serial interfaces, so you can use the UART pins of your Arduino to send and receive MIDI&#39;s event messages.<br />


	<br />


	The MIDI Shield provides an opto-isolated MIDI-IN port as well as a MIDI-OUT port. The MIDI Shield can be mounted directly on top of an Arduino, connecting the MIDI-IN to the Arduino&#39;s hardware RX pin and the MIDI-OUT to TX. Potentiometers are connected to analog pins 1 and 2, and can be used to control volume, pitch, tone or anything else you&#39;d like. Also connected on the shield are three momentary push buttons (connected to D2-4), a reset button, and green and red stat LEDs. The RUN/PROG switch allows you to program the Arduino over serial without having to remove the shield.<br />


	<br />


	<strong>Note:</strong> The MIDI Shield does not come with the through-hole MIDI connectors or trimpots soldered on. All of these components (2 MIDI connectors and 2 trimpots) are included with the product, however.<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/MIDI_Shield-v13.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/Midi_Shield.zip" name="" target="_blank">Example Arduino Sketch</a></li>


	<li>


		<a classname="" href="http://arduino.cc/en/Tutorial/Midi" name="" target="_blank">Arduino MIDI Tutorial</a></li>


</ul>


moduleID: SparkFun-Connectors-M06-SMD-STRAIGHT
family: sparkfun pin header
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Header 6
label: JP
date: 2013-02-13
path: core/sparkfun-connectors-m06-smd-straight.fzp
description:
<b>Header 6</b>
Standard 6-pin 0.1 header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). Molex polarized connector foot print use with SKU : PRT-08094 with associated crimp pins and housings.

NOTES ON THE VARIANTS LOCK and LOCK_LONGPADS...
This footprint was designed to help hold the alignment of a through-hole component (i.e.  6-pin header) while soldering it into place.  
You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line).  
This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes.  Because they are alternating, it causes a brace 
to hold the component in place.  0.005 has proven to be the perfect amount of off-center position when using our standard breakaway headers.
Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice.  Also,
if you push a header all the way into place, it is covered up entirely on the bottom side.  This idea of altering the position of holes to aid alignment 
will be further integrated into the Sparkfun Library for other footprints.  It can help hold any component with 3 or more connection pins.


moduleID: Level-Converter-v11
family: level shifter
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Logic Level Converter
date: 2011-07-08
path: core/Level-Converter-v11.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> If you&#39;ve ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. The SparkFun logic level converter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V. This level converter also works with 2.8V and 1.8V devices. Each level converter has the capability of converting 4 pins on the high side to 4 pins on the low side. Two inputs and two outputs are provided for each side.<br />


	<br />


	Bread board friendly! Can be used with normal serial, I2C, SPI, and any other digital signal. Does not work with an analog signal.<br />


	<br />


	The level converter is very easy to use. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the &#39;HV&#39; pin, low voltage (2.8V for example) to &#39;LV&#39;, and ground from the system to the &#39;GND&#39; pin.<br />


	<br />


	Pins are labeled as <span style="font-weight: bold;">I</span>nputs and <span style="font-weight: bold;">O</span>utputs. These are relative to the board. A digital one going into the RXI pin on the 5V side will show up on the RXO pin on the 3.3V side as 3.3V. A digital one going into the TXI pin on the 3.3V side will show up on the TXO pin on the 5V side as 5V.<br />


	<br />


	<span style="font-weight: bold;">Dimensions:</span> 0.5x0.6&quot;<br />


	<br />


	<span style="font-weight: bold;">Documents:</span> <a href="http://www.sparkfun.com/datasheets/BreakoutBoards/Level-Converter-v10.pdf" target="_blank">Schematic</a></p>


moduleID: SparkFun-Electromechanical-BUTTONPAD-4X4-
family: sparkfun button pad
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: BUTTONPAD-4X4
label: U
date: 2013-02-13
path: core/sparkfun-electromechanical-buttonpad-4x4-.fzp
description:
Proto layout and schematic for 4x4 button pad. Spark Fun Electronics SKU : COM-07835. Compatible common cathode tri-color LED SKU : COM-00105


moduleID: 81591c6c31ccf12f0f3ccec5f150df2d
family: usb-to-serial adapter
version: 4
fritzingversion: 0.3.17b.04.07.4081
author: andre
title: Wiring USB Adapter
label: USB
date: 2010-04-11
path: core/usbadapter_wiring.fzp
description:
The Wiring USB Adapter connects the Wiring Mini to a host computer. It uses an FTDI FT232R to convert between USB and RS-232 serial commands.


moduleID: Dagu_DGServo_9g_Top_view
family: dagu dgservo 9g
version: 4
author: Stephen Parry
title: Dagu DGServo 9g (Top view)
label: M
taxonomy: discreteParts.servo
path: core/Dagu DGServo 9g (Top view).fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Dagu DGServo 9g (Top view)</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">The breadboard view is rendered as non-perspective top projection for layout on stripboard or similar.</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">The female header connector normally attached to end of the servo wires, exists in Fritzing as a separate part in the Dagu bin. Simply plug the connector onto whichever header pins you are using, then attach the wires to the connector.</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p></body></html>


moduleID: SparkFun-PowerIC-V_REG_78XX-SINK
family: sparkfun voltage regulator
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Voltage Regulator
label: IC
date: 2013-02-13
path: core/sparkfun-poweric-v_reg_78xx-sink.fzp
description:
<b>Voltage Regulator</b>
Standard 7805 5V regulator. IGO (Input Ground Output). Spark Fun Electronics SKU : COM-00107


moduleID: 346b613c666d64fc5ac622407ace7130
family: microcontroller board (mbed)
version: 4
fritzingversion: 0.3.14b.12.13.3867
author: André Knörig
title: mbed
label: MBED
date: 2009-12-17
path: core/controller_mbed.fzp
description:
A powerful microcontroller board based on the NXP LPC processor with an ARM Cortex core. See http://mbed.org for more info.


moduleID: SparkFun-Connectors-USD-SOCKET-USD
family: sparkfun microsd socket
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: microSD Socket
label: U
date: 2013-02-13
path: core/sparkfun-connectors-usd-socket-usd.fzp
description:
<b>microSD Socket</b>
Push-push type uSD socket. Schematic element and footprint production proven. Spark Fun Electronics SKU : PRT-00127. tDoc lines correctly indicate media card edge positions when inserting (unlocked, locked, depressed).


moduleID: LilyPad-Light Sensor-v13
family: microcontroller board (lilypad)
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: f.althaus
title: LilyPad Light Sensor
date: 2013-05-25
path: core/LilyPad-Light Sensor-v13.fzp
description:
This is a simple to use light sensor that outputs an analog value from 0 to 5V. With exposure to daylight, this sensor will output 5V. Covering the sensor with your hand, the sensor will output 0V. In a normal indoor lighting situation, the sensor will output from 1 to 2V.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles.

Dimensions:

20mm outer diameter
Thin 0.8mm PCB


moduleID: SparkFun-DigitalIC-AVR-MEGA8-P-PTH
family: sparkfun atmega
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: MICROCONTROLLER
label: IC
date: 2013-02-13
path: core/sparkfun-digitalic-avr-mega8-p-pth.fzp
description:
<b>MICROCONTROLLER</b><p>
8 Kbytes FLASH<p>
1 kbytes SRAM<p>
512 bytes EEPROM<p>
USART<p>
4-channel 10 bit ADC<p>
2-channel 8 bit ADC


moduleID: SparkFun-FreqCtrl-RESONATOR-PTH
family: sparkfun resonator
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Resonator
label: Y
date: 2013-02-13
path: core/sparkfun-freqctrl-resonator-pth.fzp
description:
<b>Resonator</b>
Small SMD resonator. This is the itty bitty 10/20MHz resonators with built in caps. CSTCE10M0G55 and CSTCE20M0V53. Footprint has been reviewed closely but hasn't been tested yet.


moduleID: b7c86ac27f1d86eafa64253206dff603
family: microcontroller board (wiring)
fritzingversion: 0.6.2b.07.11.5217
author: Brett Hagman, Rogue Robotics, bhagman@roguerobotics.com, http://www.roguerobotics.com/
title: Wiring S
label: WiringS
date: 2011-07-20
path: core/Wiring_S.fzp
description:
An open source hardware platform based on the Atmel ATmega644P(A) microcontroller.  Programmable and powered via USB.  Can also be powered by external power supply.
http://wiring.org.co/


moduleID: Arduino-Fio-v22(icsp+)_bottom
family: microcontroller board (arduino)
version: 6
fritzingversion: 0.5.2b.02.18.4756
author: althaus
title: Arduino Fio (Funnel I/O)
date: 2013-04-11
path: core/Arduino-Fio-v22(iscp+)-bottom.fzp
description:
The Arduino Funnel I/O (Fio) is a board designed by Shigeru Kobayashi, based on the original design from LilyPad.

Funnel is a toolkit to sketch your idea physically, and consists of software libraries and hardware. By using Funnel, the user can interface to sensors and/or actuators with various programming languages such as ActionScript 3, Processing, and Ruby.

Arduino Fio is compatible with Funnel. It has connections for a Lithium Polymer battery and includes a charge circuit over USB. An XBee socket is available on the bottom of the board. The Fio has been designed to be wirelessly reprogrammable. Checkout our tutorial on wireless bootloading!


moduleID: SparkFun-DigitalIC-TLC5940--NT
family: sparkfun led driver
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Packages:
label: U
date: 2013-02-13
path: core/sparkfun-digitalic-tlc5940--nt.fzp
description:
16-channel LED Driver with Dot Correction and Grayscale PWM Control
<hr>
<p>The TLC5940 is a 16-channel, constant-current sink LED driver. Each channel has an individually adjustable 4096-step grayscale PWM brightness control and a 64-step, constant-current sink (dot correction). The dot correction adjusts the brightness variations between LED channels and other LED drivers. The dot correction data is stored in an integrated EEPROM. Both grayscale control and dot correction are accessible via a serial interface. A single external resistor sets the maximum current value of all 16 channels.</p>
<p><b>Packages:</b>
<ul><li>28-pin HTSSOP
<li>32-pin 5x5mm QFN
<li>28-pin DIP</ul></p>


moduleID: hirose-df13-6p-125h
family: hirose df13 series
version: 4
fritzingversion: 0.7.2b
author: Stephen Lilley
title: Hirose DF13 Series Header
label: U
path: core/hirose-df13-6p-125h_18.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt; font-weight:600;">Hirose DF13 Header:</span><span style=" font-size:8pt;"> 1.25mm Pitch Miniature Crimping Connector. Single Row Straight Pin Header (SMT)</span></p></body></html>


moduleID: sparkfun_storage_microsd
family: storage
fritzingversion: 0.9.0b
author: Althaus
title: SparkFun - microSD Transflash
label: microSD Transflash
path: core/sparkfun_storage_microsd.fzp
description:
https://www.sparkfun.com/products/544





Breakout board for the microSD socket that is not much bigger than your fingernail. Compatible with the SPI interface found on any SD card, this tiny form factor was created for cell phone storage and is perfect for your next MP3 project! Board comes fully assembled and tested.


The bare socket is available.


moduleID: raspberry_pi_3_rev-1.2
family: cpu board (raspberry pi)
version: 1
fritzingversion: 0.9.0b.04.10.5970
author: Anudit Nagar
title: Raspberry Pi 3
label: Raspberry Pi 3
path: core/Raspberry Pi 3.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The RPi3, a faster version of the awesome Raspberry Pi 2 B ARM Board with 40 pin gpio. Ready for special Raspberry Pi B+ and RPi2 Hat (Hardware attached (on) top)</p></body></html>


moduleID: 3a761a44-f1ff-11dd-b332-001a4d5c439f
family: //obsolete//mystery part
version: 1
replacedby: mystery_part_2
author: Fritzing Part-o-matic
title: Mystery Part - 2 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.2pins
path: obsolete/mystery_part2.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 2 pins on a 100 mil inline pin header footprint.


moduleID: SPARKCORE_v10_812c474c8bfaf7c15553a915ced9e227_3
family: //obsolete//microcontroller board (arduino compatible)
version: 5
replacedby: SPARKCORE_v1_fix
fritzingversion: 0.5.2b.02.18.4756
author: Brett Walach
title: Spark Core (v1.0)
path: obsolete/SPARKCORE_v10_812c474c8bfaf7c15553a915ced9e227_3.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:7.8pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The Spark Core is a tiny Wi-Fi development board that makes it easy to create internet-connected hardware. The Core is all you need to get started; power it over USB and in minutes you'll be controlling LEDs, switches and motors and collecting data from sensors over the internet!</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">It has 8 digital I/O pins, 8 analog I/O pins, 8 PWM pins; UART (Serial), SPI, I2C, and JTAG peripherals available. Programmed wirelessly (through Spark Cloud), via USB or JTAG. 3.3VDC supply voltage (on board power regulator); can be powered by USB Micro 100mA typical current consumption; 300mA peak consumption (during transmit events). 2MB of external flash; EEPROM supplied by CC3000. STM32F103 microcontroller, ARM Cortex M3 architecture, 32-bit 72Mhz processor, 128KB of Flash, 20KB of RAM.</p></body></html>


moduleID: ESP8266_module_7127946da8b954839406bc6bc9d8d0d6_59
family: //obsolete//esp8266
version: 1
replacedby: ESP8266_module_antenna
fritzingversion: 0.4.1b.07.17.4356
author: YDonnelly
title: ESP8266 WiFi Module
label: U
path: obsolete/ESP8266_module_7127946da8b954839406bc6bc9d8d0d6_59.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Generic WiFi Module based on the ESP8266 with onboard PCB antenna and UART communications</p></body></html>


moduleID: Camdenboss_CTB0158-4_5_08mm_pitch_90deg_terminals
family: ctb01x8
version: 5
fritzingversion: 0.2.2.b.03.04.2550
author: Stephen Parry
title: Camdenboss CTB0158-4
label: J
path: core/Camdenboss_CTB0158-4_5_08mm_pitch_90deg_terminals.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Camdenboss CTB0158-4</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">5.08mm (0.2&quot;) Pitch Standard Profile 90 ̊  Rising Clamp Terminal, 4 pole</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The real-life connectors are modular, made up of two or three connector blocks slotted together. These can be further slotted together to make larger connectors.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Fritzing part is derived from Screw terminals by Lionel Michel.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Because of the offset between connection pins and screw terminals, these are implemented male / female pairs of connectors with an internal connection.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p></body></html>


moduleID: Raspberry Pi B+
family: cpu board (raspberry pi)
version: 5
fritzingversion: 0.9.0b.04.10.5970
author: Fabian Althaus
title: Raspberry Pi B+
label: Raspberry Pi
path: core/Raspberry_Pi_B+.fzp
description:
The awesome Raspberry Pi ARM Board with 40 pin GPIO. Ready for special designed Raspberry Pi B+ Hat (Hardware attached (on) top)


moduleID: Taiway-100-SP-X-T1-X-X-B1-M2_SPDT_miniature_toggle_switch
family: taiway 100 series switch
version: 4
fritzingversion: 0.1.1255
author: Stephen Parry
title: Taiway 100-SP-X-T1 SPDT Miniature Toggle Switch
label: S
path: core/Taiway-100-SP-X-T1-X-X-B1-M2_SPDT_miniature_toggle_switch.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Taiway SP1-T1 SPDT Miniature Toggle Switch.</p>
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">This switch has two or three positions, the function of which varies depending on the exact model:</p>
<table border="1" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0">
<tr>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"></p></td>
<td colspan="3">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Position</p></td></tr>
<tr>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Model</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">\_</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">_|_</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">_/</p></td></tr>
<tr>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">SP-1</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">On</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">None</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">On</p></td></tr>
<tr>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">SP-2</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">On</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">None</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">(On)</p></td></tr>
<tr>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">SP-3</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">On</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Off</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">On</p></td></tr>
<tr>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">SP-4</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">(On)</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Off</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">(On)</p></td></tr>
<tr>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">SP-5</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">On</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Off</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">(On)</p></td></tr></table>
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">This part will suffice for all 5 model variations, but is important the designer specifies clearly which model is intended.</p>
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The breadboard view is rendered as non-perspective top projection for layout on stripboard or similar.</p>
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">There are four Fritzing variants of this part:</p>
<table border="1" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0">
<tr>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Variant</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Part Suffix</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Description</p></td></tr>
<tr>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">1</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">-M1</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Solder lug terminals mounted through hole</p></td></tr>
<tr>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">2</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">-M2</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">PC terminals mounted through hole</p></td></tr>
<tr>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">3</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">n/a</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Switch mounted through board , upper actuator part, no electrical connections.</p></td></tr>
<tr>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">4</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">-M1 or -M5</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Switch mounted through board, lower body part, with solder lug or wire wrap electrical connections.</p></td></tr></table>
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">A complete through board switch can be made using a combination of variants 3 and 4. This variant is variant 2.</p></body></html>


moduleID: chipkit_WF32
family: chipkit
version: 4
author: Amber Mear/Digilent Inc.
title: chipKIT WF32
label: WF32
taxonomy: part.dip.54.pins
path: core/chipkit_WF32.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0" bgcolor="#fffffd">
<tr>
<td background="http://digilentinc.com/IMG/VerticalDiv.gif">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><img src="http://digilentinc.com/IMG/VerticalDiv.gif" /></p></td>
<td style=" vertical-align:top;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Arial,Geneva,Verdana,Helvetica'; font-size:14px; color:#000000;">The chipKIT WF32 is based on the popular Arduino™ open-source hardware prototyping platform and adds the performance of the Microchip PIC32 microcontroller. The WF32 is the first board from Digilent to have a WiFi MRF24 and SD card on the board both with dedicated signals. The WF32 board takes advantage of the powerful PIC32MX695F512L microcontroller. This microcontroller features a 32-bit MIPS processor core running at 80Mhz, 512K of flash program memory, and 128K of SRAM data memory. The WF32 can be programmed using the Multi-Platform Integrated Development Environment (MPIDE), an environment based on the original Arduino IDE, modified to support PIC32. It contains everything needed to start developing embedded applications. The WF32 features a USB serial port interface for connection to the MPIDE and can be powered via USB or by an external power supply. In addition, the WF32 is fully compatible with the advanced Microchip MPLAB® IDE and works with all MPLAB® compatible in-system programmer/debuggers, such as the Microchip PICkit™3 or the Digilent chipKIT PGM. The WF32 is easy to use and suitable for both beginners and advanced users experimenting with electronics and embedded control systems.</span></p></td></tr></table></body></html>


moduleID: LiPo-USB-Charger-v21
family: charger
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: USB LiPoly Charger
date: 2011-07-08
path: core/LiPo-USB-Charger-v21.fzp
description:
<p>


	<b>Description:</b> If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The USB LiPo Charger is a basic charging circuit that allows you to charge 3.7V LiPo cells at a rate of 500mA or 100mA per hour. It is designed to charge single-cell Li-Ion or Li-Polymer batteries. Check the datasheet below to see if it will work with your battery.</p>


<p>


	The board incorporates a charging circuit, status LED, selectable solder jumper for 500mA or 100mA charging current, external LED footprint, USB input, mounting holes, and various holes for your own connectors. We include a single JST-tpye connector which connects directly to our LiPo batteries. The connector comes unsoldered, so you can use it or not.</p>


<p>


	There is also a &#39;SYS OUT&#39; which allows you to connect the charging circuit directly to your project so you don&#39;t need to disconnect the charger each time you want to use it.</p>


<p>


	<b>Documents:</b></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Prototyping/Batteries/LiPo-USB-Charger-v21(2).pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Prototyping/Batteries/LiPo-USB-Charger-v21(2).zip">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Prototyping/Batteries/MCP73831T.pdf" target="_blank">Datasheet</a> (MCP73831T)</li>


</ul>


<p>


	<strong>Replaces:</strong> <a href="http://www.sparkfun.com/products/726" target="_blank">PRT-00726</a></p>


moduleID: 4071_4_x_2_input_OR_gate_multipart_subpart1
family: 40xx 4x2 input logic gate (multi-part)
version: 4
author: Stephen G. Parry
title: 4071 4 x 2 Input OR Gate, multi-part
taxonomy: part.dip.14.pins
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">4071 4 x 2 Input OR Gate with sub-parts</span></p></body></html>

path:
C:/Users/jnoack/AppData/Roaming/Fritzing/partfactory/1416ce2b2368fabea276407ad0fa4d4f/core/4071_4_x_2_input_OR_gate_multipart_subpart1.fzp


moduleID: SparkFun-Sensors-QRB1114-
family: //obsolete//sparkfun reflective object sensor
version: 4
replacedby: SparkFun-Sensors-QRB1114-2
fritzingversion: 0.7.2b
author: www.fritzing.org
title: PHOTOTRANSISTOR REFLECTIVE OBJECT SENSOR
label: Q
date: 2013-02-13
path: obsolete/sparkfun-sensors-qrb1114-.fzp
description:
<b>PHOTOTRANSISTOR REFLECTIVE OBJECT SENSOR</b>
<p>
The QRB1113/1114 consists of an infrared emitting diode and an NPN silicon phototransistor mounted side by side on a converging
optical axis in a black plastic housing. The phototransistor responds to radiation from the emitting diode only when a reflective
object passes within its field of view. The area of the optimum response approximates a circle .200 in diameter.
<p>Datasheet: http://www.sparkfun.com/datasheets/Sensors/QRB1114.pdf
<p>MAX RATINGS:
<p>EMITTER
<br>Continuous Forward Current (IF) 50 mA
<br>Reverse Voltage (VR) 5 V
<br>Power Dissipation (PD) 100 mW
<p>SENSOR
<br>Collector-Emitter Voltage (VCEO) 30 V
<br>Emitter-Collector Voltage (VECO) 4.5 V
<br>Collector Current 20 mA
<br>Power Dissipation (PD) 100 mW


moduleID: 4011_4_x_2_input_NAND_gate_multipart
family: 40xx 4x2 input logic gate (multi-part)
version: 4
author: Stephen G. Parry
title: 4011 4 x 2 Input NAND Gate, multi-part
label: IC
taxonomy: part.dip.14.pins
path: core/4011_4_x_2_input_NAND_gate_multipart.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">4011 4 x 2 Input NAND Gate with sub-parts</span></p></body></html>


moduleID: 9DoF-Stick-v13
family: imu
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: 9 Degrees of Freedom - Sensor Stick
date: 2011-11-29
path: core/9DoF-Stick-v13.fzp
description:
<div class="description">


	<p>


		<strong>Description:</strong> The 9DOF Sensor stick is a very small sensor board with 9 degrees of freedom. It includes the ADXL345 accelerometer, the HMC5883L magnetometer, and the ITG-3200 gyro. The &#39;stick&#39; has a simple I2C interface and a mounting hole for attaching it to your project. Also, the board is a mere 0.036&quot; thick (0.093&quot; overall), allowing it to be easily mounted in just about any application.</p>


	<p>


		<strong>Dimensions:</strong> 1.37x0.42&quot;</p>


	<p>


		<strong>Documents:</strong></p>


	<ul>


		<li>


			<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Sensors/IMU/9DoF-Stick-v13.pdf" target="_blank">Schematic</a></li>


		<li>


			<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Sensors/IMU/9DoF-Stick-v13.zip" target="_blank">Eagle Files</a></li>


		<li>


			<a href="http://www.sparkfun.com/datasheets/Sensors/Accelerometer/ADXL345.pdf" target="_blank">Datasheet</a> (ADXL345)</li>


		<li>


			<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Sensors/Magneto/HMC5883L-FDS.pdf" target="_blank">Datasheet</a> (HMC5883L)</li>


		<li>


			<a href="http://www.sparkfun.com/datasheets/Sensors/Gyro/PS-ITG-3200-00-01.4.pdf" target="_blank">Datasheet</a> (ITG-3200)</li>


	</ul>


	<p>


		<strong>Replaces: </strong><a href="http://www.sparkfun.com/products/10321" target="_blank">SEN-10321</a></p>


</div>


moduleID: arduino_Yun(rev1)_v1
family: microcontroller board (arduino)
version: 1
fritzingversion: 0.9.0b
author: fabian althaus
title: Arduino Yun
path: core/arduino_Yun(rev1)_v1.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The new Arduino Yun is a microcontroller board based on the ATmega32u4 (<a href="http://www.atmel.com/dyn/resources/prod_documents/7766S.pdf"><span style=" text-decoration: underline; color:#0000ff;">datasheet</span></a>) and the Atheros AR9331. The Atheros processor supports a Linux distribution based on OpenWRT named Linino. The board has built-in Ethernet and WiFi support, a USB-A port, micro-SD card slot, 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a 3 reset buttons. </p></body></html>


moduleID: 054b3d1b56ef5470113b3e56d5dfc532
family: voltage regulator
fritzingversion: 0.6.3b.08.16.5401
author: Carlos Hansen Mendoza
title: KA78R05 Low Dropout Voltage Regulator
label: VREG
date: 2011-11-15
path: core/KA78R05_Low_Dropout_Voltage_Regulator.fzp
description:
A low-dropout or LDO regulator is a DC linear voltage regulator which can operate with a very small input–output differential voltage. The advantages of a low dropout voltage include a lower minimum operating voltage, higher efficiency operation and lower heat dissipation. [Wikipedia]


moduleID: SparkFun-RF-LS20126-
family: sparkfun gps module
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: GPS-09838
label: U
date: 2013-02-13
path: core/sparkfun-rf-ls20126-.fzp
description:
<h3> LS20126 20-Channel GPS Module</h3><br>
SparkFun SKU# <b>GPS-09838</b><br>
The LOCOSYS LS20126 GPS smart antenna module is a high sensitivity, low power, SMD type, 20 channels with built-in magnetic sensor, 3-axial acceleration sensor L1 GPS receiver and 10mm patch antenna designed for portable applications.


moduleID: SparkFun-RF-EM408_OUTLINE-
family: sparkfun gps
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: EM408_OUTLINE
label: U
date: 2013-02-13
path: core/sparkfun-rf-em408_outline-.fzp
description:
This device is only the outline of the EM408 GPS receiver.  The device is intended to give the
designer an idea of what how the receiver will fit on the board.  THIS DEVICE DOES NOT PROVIDE ANY ELECTRICAL CONNECTION TO THE BOARD!  Include the EM408_CON device in order to connect the EM408 to your design.


moduleID: AVR_SPI_PROG-PTH
family: sparkfun icsp header
version: 5
fritzingversion: 0.7.2b
author: www.fritzing.org
title: AVR 10-pin ICSP Header
label: U
date: 2014-01-17
path: core/avr_spi_prog-pth.fzp
description:
<b>AVR 10-pin ICSP Header</b> 
This is the standard AVR In Circuit Serial Programming header. Minimal, but includes pin one indicator. Works with standard Olimex programmers. Also look for the 6-pin reduced version. Spark Fun Electronics SKU: PRT-00778


moduleID: SparkFun-Sensors-L3G4200D-
family: sparkfun gyroscope
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Package:
label: U
date: 2013-02-13
path: core/sparkfun-sensors-l3g4200d-.fzp
description:
<h3>L3G4200D Three-axis, digital output gyroscope</h3>
The L3G4200D is a low-power three-axis angular rate sensor, has a full scale of ±250/±500/±2000 dps and is capable of measuring rates with a user-selectable bandwidth.<br><br>
It includes a sensing element and an IC interface capable of providing the measured angular rate to the external world through a digital interface (I2C/SPI).
<hr>
<b>Package:</b> 4x4x1.1 LGA-16 (LGA16-4x4.PAC)<br>


moduleID: SparkFun-RF-GS406SMD-MATING_SMD_***SPECIAL
family: sparkfun gps module
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: GS406SMD
label: U
date: 2013-02-13
path: core/sparkfun-rf-gs406smd-mating_smd____special.fzp
description:
50 Channel GS406 Helical GPS Receiver - SMD Connector.  The Mating SMD SPECIAL is called SPECIAL for a reason. This package was only made in order to make a dummy gs407 PCB with mating connector (used for testing).

sku: GPS-09079


moduleID: arduino_mega_sensor_shield_v20_bd1049fc611e766457ee7b1378778293_10
family: arduino shield
version: 4
author: KingDarBoja
title: Arduino Mega Sensor Shield v2.0
taxonomy: part.dip.128.pins
path: core/arduino_mega_sensor_shield_v20.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The Arduino MEGA has many more I/O pins (54 Digital pins and 16 Analog pins)than a standard Arduino. This shield also has connectors specifically for some external devices like an SD Card, Radio communications (Bluetooth and others). It also has an option to power the &quot;V&quot; pins on all the Digital I/O 3-pin groups from an external power supply instead of the Arduino +5V. This is good for large numbers of servos etc. The &quot;Analog&quot; 3-pin groups still use the Arduino +5V which is better from an electrical noise perspective.</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">This version has two options of +5V supply to all the &quot;V&quot; pins:</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Jumper on: +5 comes from the Arduino. Should be limited to about 300 ma</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Jumper off: +5 (or other appropriate voltage) comes from an external supply connected to the blue terminal strip. External power Ground must also be connected to the blue terminal strip.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Using an external supply allows more current than the Arduino or Mega can supply, such as current for control of many servos or relays, and other attached devices. Usually this is +5V because most external devices require it. It is possible to use +6 volts if ALL the attached devices are the same such as Servos with that rating.</p></body></html>


moduleID: SIM800L_ffc8b43381ee538161803713ee68337c_5
family: gsm
version: 4
author: Alberto Martínez
title: SIM800L
label: GSM, SIM, GPSR, SMS, SIM900, SIM800
taxonomy: part.mystery.magical.7.pins
path: core/SIM800L_5.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Cantarell'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Approximation of SIM800L, a simple GSM module.</p></body></html>


moduleID: ADXL345-BreakoutBoard-v13
family: accelerometer breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Triple Axis Accelerometer Breakout - ADXL345
date: 2011-07-08
path: core/ADXL345-BreakoutBoard-v13.fzp
description:
<p>


	<b>Description:</b> This new version adds 2 standoff holes as well as an extra decoupling capacitor. The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to &plusmn;16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface.&nbsp;</p>


<p>


	The ADXL345 is well suited to measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (4 mg/LSB) enables measurement of inclination changes less than 1.0&deg;.</p>


<p>


	Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion and if the acceleration on any axis exceeds a user-set level. Tap sensing detects single and double taps. Free-fall sensing detects if the device is falling. These functions can be mapped to one of two interrupt output pins. An integrated, patent pending 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor intervention. Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation.</p>


<p>


	<span style="font-weight: bold;">Features:</span></p>


<ul>


	<li>


		2.0-3.6VDC Supply Voltage</li>


	<li>


		Ultra Low Power: 40uA in measurement mode, 0.1uA in standby@ 2.5V</li>


	<li>


		Tap/Double Tap Detection</li>


	<li>


		Free-Fall Detection</li>


	<li>


		SPI and I2C interfaces</li>


</ul>


<p>


	<b>Documents:</b></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Accelerometer/ADXL345-BreakoutBoard-v13.pdf" target="_blank"> Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Sensors/Accelerometer/ADXL345-BreakoutBoard-v13.zip">Eagle Files</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Accelerometer/ADXL345.pdf" name="" target="_blank"> Datasheet</a></li>


	<li>


		<a href="http://www.sparkfun.com/tutorials/240" target="_blank">Quickstart Guide</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Accelerometer/ADXL345-talktest.zip" name="" target="_blank">Example Code</a> (ATmega328)</li>


	<li>


		<a href="http://bildr.org/2011/03/adxl345-arduino/" target="_blank">Bildr Tutorial </a></li>


</ul>


<p>


	<strong>Replaces: </strong><a href="http://www.sparkfun.com/products/9156" target="_blank">SEN-09156</a></p>


moduleID: LilyPad_Arduino_USB
family: microcontroller board (lilypad)
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: althaus
title: LilyPad Arduino USB
date: 2013-04-03
path: core/LilyPad_Arduino_USB.fzp
description:
The LilyPad Arduino USB is a microcontroller board based on the ATmega32u4 (datasheet). It has 9 digital input/output pins (of which 4 can be used as PWM outputs and 4 as analog inputs), an 8 MHz resonator, a micro USB connection, a JST connector for a 3.7V LiPo battery, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a battery to get started.



The LilyPad Arduino USB differs from previous LilyPad boards in that the ATmega32u4 has built-in USB communication, eliminating the need for a separate USB-to-serial adapter. This allows the LilyPad Arduino USB to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. It also has other implications for the behavior of the board; these are detailed on the getting started page.


moduleID: 5cc9de9cdfa593d8e073514cde1c7c77
family: microcontroller board (basic stamp)
version: 4
fritzingversion: 0.3.17b.04.07.4081
author: Lionel Michel
title: BASIC Stamp 2px24
label: BS
date: 2010-04-08
path: core/BASIC_Stamp_2px24.fzp
description:
The BASIC Stamp 2px24 serves as the brains inside of electronics projects and applications that require a programmable microcontroller. It is able to control and monitor timers, keypads, motors, sensors, switches, relays, lights, and more. Programming is performed in an easy-to-learn language called PBASIC.


moduleID: 145b5412a0ffbe91a876166139419e15
family: microcontroller board (basic stamp)
version: 4
fritzingversion: 0.3.17b.04.07.4081
author: Lionel Michel
title: BASIC Stamp 2sx
label: BS
date: 2010-04-08
path: core/BASIC_Stamp_2sx.fzp
description:
The BASIC Stamp 2sx serves as the brains inside of electronics projects and applications that require a programmable microcontroller. It is able to control and monitor timers, keypads, motors, sensors, switches, relays, lights, and more. Programming is performed in an easy-to-learn language called PBASIC.


moduleID: d0cab10c62e1441045ed0415450e2819
family: //obsolete//rfm12b transreceiver
version: 2
replacedby: RFM12b_hope
fritzingversion: 0.7.0b.02.01.5801
author: red byer
title: RFM12b HopeRF Transceiver
label: RFM12b
date: 2012-03-14
path: obsolete/RFM12b_HopeRF_old_Transceiver.fzp
description:
RF Transceiver by Hope RF.  Well supported Arduino libraries are available.  Part is available in several frequencies (433MHz, 915MHz)...


moduleID: 23LCV1024_24357530b44412a899aa27521bf5766d_1
family: memory
version: 4
author: Christoph Rieder
title: 23LCV1024
label: 23LCV1024
taxonomy: part.dip.8.pins
path: core/23LCV1024_1.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Serial SRAM</p></body></html>


moduleID: 1e03b5a0-ed62-11dd-b332-001a4d5c439f
family: //obsolete//mystery part
version: 1
replacedby: mystery_part_12
author: Fritzing Part-o-matic
title: Mystery Part - 12 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.12pins
path: obsolete/mystery_part12.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 12 pins on a 100 mil inline pin header footprint.


moduleID: Arduino Nano3
family: //obsolete//microcontroller board (arduino)
version: 5
replacedby: Arduino Nano3(fix)
fritzingversion: 0.5.2b.02.18.4756
author: Althaus
title: Arduino Nano (Rev3.0)
date: 2013-04-11
path: obsolete/Arduino Nano3.fzp
description:
The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.0) or ATmega168 (Arduino Nano 2.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. The Nano was designed and is being produced by Gravitech.


moduleID: IchigoJamT
family: cpu board (ichigojam t)
version: 1
fritzingversion: 0.9.0b.04.10.5970
author: Takeshi Sasaki
title: IchigoJam T
label: IchigoJam T
path: core/IchigoJamT.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS UI Gothic'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt;">IchigoJam T (IchigoJam means also strawberry jam)  is a low-power, low-cost single board computer development platform.</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt;">As &quot;Kid's PC&quot;, it is developing for children's programming education.</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt;">In this series, the BASIC language is activated just by turning on the power, and there is a feature that it can program immediately.</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt;">Because it has I/O ports, it is easy to control electronic work, not limited to programs.</span></p></body></html>


moduleID: 045cef49a96039c64e7363608e127209
family: motor driver
fritzingversion: 0.7.0b.02.01.5801
author: David Thomasson
title: Dual VNH2SP30 Motor Driver
label: MD03A
date: 2012-02-05
path: core/Dual_VNH2SP30_Motor_Driver.fzp
description:
The Pololu dual high-power motor driver carrier for the VNH2SP30 motor driver integrated circuits from ST.
http://www.pololu.com/catalog/product/708


moduleID: ArduPilotMega_v15
family: uav
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: ArduPilot Mega
date: 2011-11-29
path: core/ArduPilotMega_v15.fzp
description:
<p>


	<span style="font-weight: bold;">Description: </span>The ArduPilot Mega is the newest version of autopilot board designed by Chris Anderson and Jordi Mu&ntilde;oz of DIY Drones. This latest revision uses<span><span> </span></span>the ATmega2560<span><span> in place of the ATmega1280.</span></span><br />


	<br />


	<span>ArduPilot Mega is a fully programmable autopilot that requires a GPS module and sensors</span><span> to create a functioning Unmanned Aerial Vehicle (UAV). The autopilot handles both stabilization and navigation, eliminating the need for a&nbsp;separate&nbsp;stabilization system. It also supports a &quot;fly-by-wire&quot; mode that can stabilize an aircraft when flying manually under RC control, making it easier and safer to fly. The hardware and software are all open source. The board comes with all the surface-mount parts already soldered, but requires the user to solder on connectors. RC processing firmware is already loaded, but the autopilot software must be downloaded and loaded onto the board by the user.</span><span> It can be programmed with the&nbsp;<a href="http://arduino.cc/en/Main/Software" name="">Arduino IDE</a>. </span><br />


	<br />


	We recommend the following items to accompany this product:</p>


<div>


	<ul>


		<li>


			<a href="http://store.diydrones.com/product_p/spk-gps-gs407.htm">uBlox 5 GPS module</a> and <a href="http://store.diydrones.com/product_p/br-0008-01.htm">adapter</a></li>


		<li>


			<a href="http://www.sparkfun.com/commerce/product_info.php?products_id=8772" name="" target="">FTDI Basic</a> or <a href="http://store.diydrones.com/ProductDetails.asp?ProductCode=TTL%2D232R%2D3V3" name="" target="_blank">FTDI cable</a> for programming</li>


	</ul>


</div>


<div>


	Other necessary elements, including aircraft recommendations, can be found at the project&#39;s home page.</div>


<div>


	<div style="font-weight: bold;">


		<br />


		<span><span>Features:</span></span></div>


	<div>


		<ul>


			<li>


				<span>Controller designed to be used with autonomous aircraft, car or boat.</span></li>


			<li>


				<span><span>Based on a 16MHz Atmega2560 processor.</span></span></li>


			<li>


				<span><span>Built-in hardware failsafe that uses a separate circuit (multiplexer chip and ATMega328 processor) to transfer control from the RC system to the autopilot and back again. Includes ability to reboot the main processor in mid-flight</span></span></li>


			<li>


				<span><span>Dual-processor design with 32 MIPS of onboard power</span></span></li>


			<li>


				<span><span>Supports of 3D waypoints and mission commands (limited only by memory)</span></span></li>


			<li>


				<span><span>Comes with a 6-pin GPS connector (EM406 style). </span></span></li>


			<li>


				<span><span>Has 16 spare analog inputs (with ADC on each) and 40 spare digital input/outputs to add additional sensors</span></span></li>


			<li>


				<span><span>Four dedicated serial ports for two-way telemetry (using optional<a href="../commerce/product_info.php?products_id=9097"> XBee modules</a>) and expansion<br />


				</span></span></li>


			<li>


				<span><span>Can be powered by either the RC receiver or a separate battery</span></span></li>


			<li>


				<span><span>Hardware-driven servo control, which means less processor overhead, tighter response and no jitters</span></span></li>


			<li>


				Eight <span><span>RC channels (including the autopilot on/off channel) can be processed by the autopilot.&nbsp;</span></span></li>


			<li>


				<span><span>LEDs for power, failsafe status, autopilot status and GPS lock</span></span></li>


			<li>


				<span><span>Full autopilot software, including IMU and groundstation/mission planning code,&nbsp; are available at <a href="http://diydrones.com/">DIY Drones</a>. Code supports autonomous takeoff and landing. </span></span></li>


		</ul>


	</div>


</div>


<div>


	<span style="font-weight: bold;">Dimensions:</span> 40mm x 69mm</div>


<p>


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Sensors/IMU/ArduPilotMega_v15.pdf" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Sensors/IMU/ArduPilotMega_v15.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/ArduPilotMega_demo.zip" target="_blank">Example Firmware</a> - reads in 8 channels and outputs 8 channels</li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/ArduPilotMega_dancing.zip" target="_blank">Example Dancing Firmware</a> - <a href="http://www.youtube.com/watch?v=U0Smrhy1xYg" target="_blank">Video</a></li>


	<li>


		<a classname="" href="http://ardupilot.com/" name="" target="_blank">ArduPilot Project Homepage</a></li>


	<li>


		Software and instructions: <a classname="" href="http://diydrones.com/" name="" target="_blank">DIY Drones Community</a></li>


</ul>


<p>


	<strong>Replaces:</strong> <a href="http://www.sparkfun.com/products/9710" target="_blank">GPS-09710</a></p>


moduleID: SparkFun-PowerIC-V_REG_317-SMD
family: sparkfun voltage regulator
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Voltage Regulator
label: U
date: 2013-02-13
path: core/sparkfun-poweric-v_reg_317-smd.fzp
description:
<b>Voltage Regulator</b>
Standard LM317 adjustable voltage regulator. AOI (Adjust Output Input). Google 'LM317 Calculator' for easy to use app to get the two resistor values needed. 240/720 for 5V output. 240/390 for 3.3V output. Spark Fun Electronics SKU : COM-00527


moduleID: Teensy3.0
family: microcontroller board (teensy)
fritzingversion: 0.4.4b.10.03.4492
author: Fabian Althaus
title: Teensy 3.0
label: Teensy
path: core/Teensy 3.0.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The Teensy is a complete USB-based microcontoller development system, in a very small footprint, capable of implementing many types of projects. All programming is done via the USB port. No special programmer is needed, only a standard micro-USB cable and a PC or Macintosh with a USB port.</p></body></html>


moduleID: Arduino_Leonardo_Rev3(fix)
family: microcontroller board (arduino)
version: 5
fritzingversion: 0.5.2b.02.18.4756
author: althaus
title: Arduino Leonardo (Rev3b)
date: 2013-04-03
path: core/Arduino_Leonardo_Rev3(fix).fzp
description:
The Arduino Leonardo is a microcontroller board based on the ATmega32u4 (datasheet). It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.



The Leonardo differs from all preceding boards in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Leonardo to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. It also has other implications for the behavior of the board; these are detailed on the getting started page. 


moduleID: 4001_4_x_2_input_NOR_gate_multipart_subpart2
family: 40xx 4x2 input logic gate (multi-part)
version: 4
author: Stephen G. Parry
title: 4001 4 x 2 Input NOR Gate
label: 1
taxonomy: part.dip.14.pins
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">4001 4 x 2 Input NOR Gate with sub-parts</span></p></body></html>

path:
C:/Users/jnoack/AppData/Roaming/Fritzing/partfactory/1416ce2b2368fabea276407ad0fa4d4f/core/4001_4_x_2_input_NOR_gate_multipart_subpart2.fzp


moduleID: Gizwits_WiFi_Witty_ESP_12F
family: gizwits wifi witty esp-12f
version: 1
fritzingversion: 0.9.3b
author: Mike Causer
title: Gizwits WiFi Witty ESP-12F
label: Gizwits WiFi Witty ESP-12F
path: core/Gizwits_WiFi_Witty_ESP_12F.fzp
description:
A breadboard friendly two part WiFi development board by Gizwits, powered by an ESP8266 ESP-12F SoC, featuring twin micro-usb ports, a photoresistor, a WS2812 RGB-LED and three buttons. The board comes in two parts. The bottom half has reset and flash buttons, a micro-usb with CH340 UART and 2x 1x08 female headers. The top half has the ESP-12F, LDR, RGB-LED, micro-usb (for power only), an input button and 2x 1x08 male headers which fill an entire breadboard (12 pins wide).


moduleID: 0223_0eb44bbb4c4f50c21567b8c79110a3c3_5
family: //obsolete//stepper motor driver
version: 1
replacedby: pololu0002_a988
fritzingversion: 0.7.7b.08.14.6293
author: Király László
title: A4988 Stepper Motor Driver Carrier
label: MD09B
path: obsolete/0223_0eb44bbb4c4f50c21567b8c79110a3c3_5.fzp
description:
The Pololu stepper motor driver carrier for the A4988 motor driver integrated circuits.
http://www.pololu.com/catalog/product/1182


moduleID: pololu0002_7d1d85d9e29084ad573942b0077ce80e_1
family: //obsolete//stepper motor driver
version: 4
replacedby: pololu0002_a988
fritzingversion: 0.5.2b.02.18.4756
author: Matteo Perini
title: Pololu A4988
label: Pololu A4988
path: obsolete/pololu0002_7d1d85d9e29084ad573942b0077ce80e_1.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Ubuntu'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The A4988 stepper motor driver carrier is a breakout board for Allegro’s A4988 microstepping bipolar stepper motor driver. The driver features adjustable current limiting, overcurrent and overtemperature protection, and five different microstep resolutions (down to 1/16-step). It operates from 8 – 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow (it is rated for 2 A per coil with sufficient additional cooling).</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:x-large; font-weight:600;">Dimensions</span></p>
<table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0">
<tr>
<td>
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Size: </span></p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">0.6″ × 0.8″ </p></td></tr>
<tr>
<td>
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">  Weight: </span></p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">1.3 g<a href="http://www.pololu.com/product/1182/specs#note1"><span style=" text-decoration: underline; color:#0057ae; vertical-align:super;">1</span></a> </p></td></tr></table>
<p style=" margin-top:16px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:x-large; font-weight:600;">General specifications</span></p>
<table border="0" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0">
<tr>
<td>
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Minimum operating voltage: </span></p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">8 V </p></td></tr>
<tr>
<td>
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Maximum operating voltage: </span></p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">35 V </p></td></tr>
<tr>
<td>
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Continuous current per phase: </span></p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">1 A<a href="http://www.pololu.com/product/1182/specs#note2"><span style=" text-decoration: underline; color:#0057ae; vertical-align:super;">2</span></a> </p></td></tr>
<tr>
<td>
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Maximum current per phase: </span></p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">2 A<a href="http://www.pololu.com/product/1182/specs#note3"><span style=" text-decoration: underline; color:#0057ae; vertical-align:super;">3</span></a> </p></td></tr>
<tr>
<td>
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Minimum logic voltage: </span></p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">3 V </p></td></tr>
<tr>
<td>
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Maximum logic voltage: </span></p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">5.5 V </p></td></tr>
<tr>
<td>
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Microstep resolutions: </span></p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">full, 1/2, 1/4, 1/8, and 1/16 </p></td></tr>
<tr>
<td>
<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Reverse voltage protection?: </span></p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">N </p></td></tr></table>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">This product is a carrier board or breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection; we therefore recommend careful reading of the <a href="http://www.pololu.com/file/download/a4988_DMOS_microstepping_driver_with_translator.pdf?file_id=0J450"><span style=" text-decoration: underline; color:#0057ae;">A4988 datasheet</span></a> (380k pdf) before using this product. This stepper motor driver lets you control one <a href="http://www.pololu.com/category/87/stepper-motors"><span style=" text-decoration: underline; color:#0057ae;">bipolar stepper motor</span></a> at up to 2 A output current per coil (see the <span style=" font-style:italic;">Power Dissipation Considerations</span> section below for more information). Here are some of the driver’s key features:</p>
<ul style="margin-top: 0px; margin-bottom: 0px; margin-left: 0px; margin-right: 0px; -qt-list-indent: 1;"><li style=" margin-top:12px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Simple step and direction control interface </li>
<li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step </li>
<li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates </li>
<li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay) </li>
<li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection </li>
<li style=" margin-top:0px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Short-to-ground and shorted-load protection</li></ul>
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">This product ships with all surface-mount components—including the A4988 driver IC—installed as shown in the product picture.</p>
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Note that we carry several stepper motor drivers that can be used as alternatives for this module. The <a href="http://www.pololu.com/product/2128"><span style=" text-decoration: underline; color:#0057ae;">Black Edition A4988 stepper motor driver carrier</span></a> is available with approximately 20% better performance; except for thermal characteristics, the Black Edition and this (green) board are interchangeable. We also sell a <a href="http://www.pololu.com/product/1183"><span style=" text-decoration: underline; color:#0057ae;">larger version of the A4988 carrier</span></a> that has reverse power protection on the main power input and built-in 5 V and 3.3 V voltage regulators that eliminate the need for separate logic and motor supplies. Our <a href="http://www.pololu.com/product/2133"><span style=" text-decoration: underline; color:#0057ae;">DRV8825 carrier</span></a> offers approximately 50% better performance over a wider voltage range and with a few additional features, while our <a href="http://www.pololu.com/product/2134"><span style=" text-decoration: underline; color:#0057ae;">DRV8834 carrier</span></a> works with motor supply voltages as low as 2.5 V; either of these boards can be used as a drop-in replacement for this driver in many applications.</p></body></html>


moduleID: quadstep-v12
family: motor controller
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: QuadStepper
date: 2011-07-08
path: core/quadstep-v12.fzp
description:
<p>


	<strong>Description:</strong> The Quadstepper motor driver board allows you to control up to 4 bipolar stepper motors simultaneously using logic level IO pins. Each motor driver has an output drive capacity of 35V and 2Amps. The board is capable of driving motors in full, half, quarter, eight, and sixteenth-step modes. The logic levels are selectable between 3.3V and 5V by way of a jumper. The bus header allows you to control all four motors with only 6 IO pins by controlling the enable (EN pins) for each motor, although each motor will be activated alone, not simultaneously. Be sure to close all of the &#39;Bus Enable&#39; jumpers on the back of the board in order to use the Bus header.</p>


<p>


	The Quadstepper is a great board for 3D printing applications as well as a host of other applications where it&#39;s necessary to control precise movement from logic level IO pins.</p>


<p>


	<strong>Note:</strong> Although this board can theoretically supply 2A per motor, you will run into heat issues if you do not have proper thermal management (ie - heatsinks). Without heatsinking, you can expect to drive each motor up to 1A, which would be fine for our <a href="http://www.sparkfun.com/products/9238" target="_blank">stepper motors</a>, or something similar.</p>


<p>


	<strong>Features:</strong></p>


<ul>


	<li>


		Can control up to 4 bipolar stepper motors simultaneously.</li>


	<li>


		Each motor driver has an output drive capacity of 35V and 2Amps.</li>


	<li>


		Capable of driving motors in full, half, quarter, eight, and sixteenth-step modes.</li>


	<li>


		Power input (barrel jack) needs to be less than 30V and supply enough current for your specific stepper motors.</li>


	<li>


		Jumper (labeled &quot;5V&quot;) controls power to the motor drivers, logic levels, and VOUT pin, selectable 3.3/5V.</li>


	<li>


		Bus header allows you to control all four motors with only 6 IO pins by controlling the enable (EN pins) for each motor</li>


	<li>


		2.1mm, center positive barrel jack</li>


</ul>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Widgets/quadstep-v11assembly.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Widgets/quadstep-v11assembly.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Widgets/A4983SETTR-T-Allegro-datasheet-123643.pdf" target="_blank">Datasheet</a> (A4983SETTR-T)</li>


</ul>


moduleID: chipkit_MotorShield
family: chipkit
version: 4
author: Digilent/Amber Mear
title: chipKIT Motor Shield
label: Motor Shield
taxonomy: part.dip.50.pins
path: core/chipkit_MotorShield.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Arial,Geneva,Verdana,Helvetica'; font-size:14px; color:#000000; background-color:#fffffd;">The chipKIT™ Motor Shield is an expansion board for use with the chipKIT Uno32 and chipKIT uC32. It provides additional circuitry and connectors for the Uno32 and uC32 to drive various motors types.  The chipKIT Motor Shield is designed to drive DC motors, servo motors, and stepper motors. It also provides additional I/O via an I</span><span style=" font-family:'Arial,Geneva,Verdana,Helvetica'; color:#000000; background-color:#fffffd;">2</span><span style=" font-family:'Arial,Geneva,Verdana,Helvetica'; font-size:14px; color:#000000; background-color:#fffffd;">C I/O extender.</span></p></body></html>


moduleID: SparkFun-DigitalIC-WS2801-
family: sparkfun led driver
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: WS2801
label: U
date: 2013-02-13
path: core/sparkfun-digitalic-ws2801-.fzp
description:
<h3>WS2801</h3>
3 Channel Constant Current LED Driver with programmable PWM outputs.
<br>
<br>
Datasheet:  http://www.sparkfun.com/datasheets/Components/LED/WS2801.pdf


moduleID: SparkFun-RF-ANTENNA2-SMD2
family: sparkfun antenna (chip)
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Chip antenna
label: U
date: 2013-02-13
path: core/sparkfun-rf-antenna2-smd2.fzp
description:
<b>Chip antenna</b><p>
Single endded antenna. Common with smaller chip antennas. CHIP4 package is the GPS Chip Antenna <b>SKU:</b> GPS-08418. CHIP5 package is 2.4GHz chip antenna <b>SKU:</b> WRL-00144.


moduleID: SparkFun-Electromechanical-ENCODER_RGB_CA-
family: sparkfun rotary encoder
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: ENCODER_RGB_CA
label: SW
date: 2013-02-13
path: core/sparkfun-electromechanical-encoder_rgb_ca-.fzp
description:
<h3>Illuminated Rotary Encoder w/ RGB LED and select switch</h3>

EC12PLRGBSDVBF-D: http://top-up.so-buy.com/front/bin/ptdetail.phtml?Part=EC12PLRGBSDVBF-D


moduleID: 888H-1CC-F-C E_2c587b2bac849b62c1c8ed5abf5ea53c_11
family: relay
version: 4
author: Christoph Wempe
title: 888H-1CC-F-C E
label: 888H-1CC-F-C E
path: core/888H-1CC-F-C E_2c587b2bac849b62c1c8ed5abf5ea53c_11.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">SONG CHUAN 888H-1CC-F-C E</p></body></html>


moduleID: L3G4200D-Breakout-v10
family: gyroscope breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Tri-Axis Gyro Breakout - L3G4200D
date: 2011-11-29
path: core/L3G4200D-Breakout-v10.fzp
description:
<p>


	<strong>Description:</strong> This is a breakout board for the L3G4200D low-power three-axis angular rate sensor. The L3G4200D has a full scale of &plusmn;250/&plusmn;500/&plusmn;2000 dps and is capable of measuring rates with a user-selectable bandwidth. These work great in gaming and virtual reality input devices, GPS navigation systems and robotics.</p>


<p>


	<strong>Features:</strong></p>


<ul>


	<li>


		Three selectable full scales (250/500/2000 dps)</li>


	<li>


		I2C/SPI digital output interface</li>


	<li>


		16 bit-rate value data output</li>


	<li>


		8-bit temperature data output</li>


	<li>


		Wide supply voltage: 2.4 V to 3.6 V</li>


	<li>


		Low voltage-compatible IOs (1.8 V)</li>


	<li>


		Embedded power-down and sleep mode</li>


	<li>


		Embedded temperature sensor</li>


	<li>


		High shock survivability</li>


</ul>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Sensors/Gyros/3-Axis/L3G4200D-Breakout-v10.pdf">Schematic</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Sensors/Gyros/3-Axis/L3G4200D-Breakout-v10.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Sensors/Gyros/3-Axis/17116.pdf" target="_blank">Datasheet</a> (L3G4200D)</li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Sensors/Gyros/3-Axis/L3G4200D_Example.zip" target="_blank">Example Code</a></li>


	<li>


		<a href="http://bildr.org/2011/06/l3g4200d-arduino/" target="_blank">Bildr Tutorial</a></li>


</ul>


moduleID: SparkFun-DigitalIC-PCA9306-
family: sparkfun pca9306
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: PCA9306
label: U
date: 2013-02-13
path: core/sparkfun-digitalic-pca9306-.fzp
description:
Bidirectional I2C level shifter.<br>
NOT compatible with all available part number pinout schemes- DOUBLE CHECK!!!


moduleID: canbus_shield-v12
family: can shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino Can-Bus Shield
date: 2011-07-08
path: core/canbus_shield-v12.fzp
description:
<div>


	<strong>Description:</strong> This shield gives the Arduino CAN-Bus capability. It uses the Microchip MCP2515 CAN controller with MCP2551 CAN transceiver. CAN connection is via a standard 9-way sub-D for use with&nbsp;OBDII cable. Ideal for automative CAN application. The shield also has a uSD card holder, serial LCD connector and connector for an&nbsp;EM406 GPS module. Making this shield ideal for data logging application.</div>


<div>


	<strong>Features</strong></div>


<div>


	<ul>


		<li>


			CAN v2.0B upto 1 Mb/s</li>


		<li>


			High speed SPI Interface (10 MHz)</li>


		<li>


			Standard and extened data and remote frames</li>


		<li>


			CAN connection via standard 9-way sub-D connector</li>


		<li>


			9-way sub-D standard&nbsp;OBDII connection cable</li>


		<li>


			Power can supply to Arduino by sub-D via resettable fuse and reverse polarity protection.</li>


		<li>


			Socket for&nbsp;EM406 GPS module</li>


		<li>


			Micro SD card holder</li>


		<li>


			Connector for&nbsp;serial LCD</li>


		<li>


			Reset button</li>


		<li>


			Joystick control menu navigation control</li>


		<li>


			Two LED indicator</li>


	</ul>


	<p>


		<strong>Documents:</strong></p>


	<ul>


		<li>


			<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/canbus_shield-v12.pdf" target="_blank">Schematic</a></li>


		<li>


			<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/canbus_shield-v12.zip" target="_blank">Eagle Files</a></li>


		<li>


			<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/MCP2515.pdf" target="_blank">Datasheet </a>(MCP2515)</li>


		<li>


			<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/MCP2551.pdf" target="_blank">Datasheet </a>(MCP2551)</li>


	</ul>


</div>


moduleID: SparkFun-DiscreteSemi-TVS-
family: sparkfun diode (tvs)
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: TVS
label: U
date: 2013-02-13
path: core/sparkfun-discretesemi-tvs-.fzp
description:
Transient voltage suppressor- prevents ESD on inputs.<br>
Ignore package description- MBRA140 is NOT this type of part!!!


moduleID: powerpushbutton_adafruit
family: button
version: 1
fritzingversion: 0.9.2b
author: Fabian Althaus
title: Adafruit Push-button Power Switch Breakout
label: Btn
path: core/powerbutton_adafruit.fzp
description:
The Adafruit Push-button Power Switch is a tidy little design that lets you control a DC power source using an everyday tactile button. The breakout uses a latching analog circuit that is triggered by a push of the button. Press once to turn on, then press again to turn off. The circuit uses a 3A P-FET to connect and disconnect the IN pin to the OUT pin. Works great from 3V to 14VDC and up to 3A (although the FET gets a little toasty at continuous 3A draw) yet has only 0.5uA quiescent current draw.


moduleID: AnalogDevices_OP37GPZ
family: adi-opamp
version: 4
fritzingversion: 0.7.12b.02.13.6882
author: Analog Devices
title: OP37 - Low Noise, Precision, High Speed Op Amp
label: U
path: core/ADI_OP37.AnalogDevices_OP37GPZ.fzp
spice:
X{instanceTitle} {net connector3} {net connector2} {net connector7} {net connector4} {net connector6} OP37G


moduleID: teensy_3.1
family: microcontroller board (teensy)
fritzingversion: 0.4.4b.10.03.4492
author: Fabian Althaus modified by Ouinouin
title: Teensy 3.1
label: Teensy 3.1
path: core/teensy_3.1.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">The Teensy is a complete USB-based microcontoller development system, in a very small footprint, capable of implementing many types of projects. All programming is done via the USB port. No special programmer is needed, only a standard micro-USB cable and a PC or Macintosh with a USB port. It has a USB keyboard/mouse/joystick emulation stack and can be programmed through Arduino IDE.</span></p></body></html>


moduleID: ELECTRON_90f1556e6dcbdc62b58429de7696758a_7
family: //obsolete//microcontroller board (arduino compatible)
version: 1
replacedby: electron_board
fritzingversion: 0.9.2b
author: Brett Walach & Julien Vanier
title: Electron
path: obsolete/ELECTRON_90f1556e6dcbdc62b58429de7696758a_7.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">The Electron is a cellular development board that makes it easy to create internet-connected hardware. The Electron is all you need to get started. It even has its own lithium battery! In minutes you'll be controlling LEDs, switches, and motors and collecting data from sensors over the internet!</span></p></body></html>


moduleID: AnalogDevices_AD8226ARZ
family: adi-inamp
version: 4
fritzingversion: 0.7.12b.02.13.6882
author: Analog Devices
title: AD8226 - Rail-to-Rail output Instrumentation Amplifier
label: U
path: core/ADI_AD8226.AnalogDevices_AD8226ARZ.fzp
spice:
X{instanceTitle} {net connector1} {net connector2} {net connector3} {net connector4} {net connector5} {net connector6} {net connector7} {net connector8} AD8226


moduleID: SparkFun-PowerIC-MAX98300-ETA+
family: sparkfun audio amplifier
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Mono 2.6W Class D Amplifier
label: U
date: 2013-02-13
path: core/sparkfun-poweric-max98300-eta_.fzp
description:
<b>Mono 2.6W Class D Amplifier</b><p>

Datasheet: <a href=http://datasheets.maxim-ic.com/en/ds/MAX98300.pdf>http://datasheets.maxim-ic.com/en/ds/MAX98300.pdf</a><p>

The MAX98300 mono 2.6W Class D amplifier provides
Class AB audio performance with Class D efficiency.
This device offers five selectable gain settings (0dB,
3dB, 6dB, 9dB, and 12dB) set by a single gain-select
input (GAIN).
Active emissions-limiting edge-rate and overshoot control
circuitry greatly reduces EMI. A patented filterless
spread-spectrum modulation scheme eliminates the need
for output filtering found in traditional Class D devices.
These features reduce application component count.
The MAX98300 industry-leading 0.78mA at 3.7V (1.1mA
at 5V) quiescent current extends battery life in portable
applications.
The MAX98300 is available in an 8-pin TDFN-EP (2mm
x 2mm x 0.8mm) and a 9-bump (1.2mm x 1.2mm) WLP.
Both packages are specified over the extended -40NC to
+85NC temperature range.


moduleID: 1e03b59c-ed62-11dd-b332-001a4d5c439f
family: //obsolete//mystery part
version: 1
replacedby: mystery_part_11
author: Fritzing Part-o-matic
title: Mystery Part - 11 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.11pins
path: obsolete/mystery_part11.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 11 pins on a 100 mil inline pin header footprint.


moduleID: 4011_4_x_2_input_NAND_gate_single
family: 40xx 4x2 input logic gate (single part)
version: 4
author: Stephen G. Parry
title: 4011 4 x 2 Input NAND Gate, single part
label: IC
taxonomy: part.dip.14.pins
path: core/4011_4_x_2_input_NAND_gate_single.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">4011 4 x 2 Input NAND Gate as a single part</span></p></body></html>


moduleID: grove_button
family: grove
version: 4
author: Yihui Xiong
title: Grove Button
label: Grove
taxonomy: part.dip.8.pins
path: core/seeed_grove_button.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'SimSun';">A button</span></p></body></html>


moduleID: Camdenboss_CTB0158-11_5_08mm_pitch_90deg_terminals
family: ctb01x8
version: 5
fritzingversion: 0.2.2.b.03.04.2550
author: Stephen Parry
title: Camdenboss CTB0158-11
label: J
path: core/Camdenboss_CTB0158-11_5_08mm_pitch_90deg_terminals.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Camdenboss CTB0158-11</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">5.08mm (0.2&quot;) Pitch Standard Profile 90 ̊  Rising Clamp Terminal, 11 pole</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The real-life connectors are modular, made up of two or three connector blocks slotted together. These can be further slotted together to make larger connectors.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Fritzing part is derived from Screw terminals by Lionel Michel.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Because of the offset between connection pins and screw terminals, these are implemented male / female pairs of connectors with an internal connection.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p></body></html>


moduleID: SparkFun-Connectors-AVR_SPI_PRG_6-OFFSET_PADS
family: sparkfun isp header
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: AVR ISP 6 Pin
label: J
date: 2013-02-13
path: core/sparkfun-connectors-avr_spi_prg_6-offset_pads.fzp
description:
<b>AVR ISP 6 Pin</b>
This is the reduced ISP connector for AVR programming. Common on Arduino. This footprint will take up less PCB space and can be used with a 10-pin to 6-pin adapter such as SKU: BOB-08508


moduleID: prefix0000_20f55f90aa18635d44e794080c8bfbf6_9
family: //obsolete//pressure sensor breakout
version: 4
replacedby: bmp180_breakout
fritzingversion: 0.5.2b.02.18.4756
author: Richard Bruneau
title: Barometric Pressure Sensor - BMP180 Breakout (GY-68)
path: obsolete/prefix0000_20f55f90aa18635d44e794080c8bfbf6_9.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">This is a simple breakout board for the BMP180, a high-precision, low-power barometric pressure sensor made by Bosch Sensortec. The range of measurement is from 300hPa to 1100hPa. The sensor can be supplied with voltage ranging from 1.8V to 3.6V. Operating temperature range is -40 to +85 °C.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">This particular breakout board (or perhaps the configuration) is produced by Shenzhen Keep Power Electronic Co., Ltd., and is commonly found on eBay, AliExpress, and many other online stores.</p></body></html>


moduleID: Arduino_bt07
family: microcontroller board (arduino)
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: fabian Althaus
title: Arduino BT
date: 2013-05-25
path: core/Arduino_bt07.fzp
description:
The Arduino BT is a microcontroller board originally was based on the ATmega168, but now is supplied with the 328 (datasheet) and the Bluegiga WT11 bluetooth module (details and datasheet [pdf]). It supports wireless serial communication over bluetooth (but is not compatible with Bluetooth headsets or other audio devices). It has 14 digital input/output pins (of which 6 can be used as PWM outputs and one can be used to reset the WT11 module), 6 analog inputs, a 16 MHz crystal oscillator, screw terminals for power, an ICSP header, and a reset button. It contains everything needed to support the microcontroller and can be programmed wirelessly over the Bluetooth connection. Instructions are available for getting started with the Arduino BT.


moduleID: LilyPad-slide-switch13
family: microcontroller board (lilypad)
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Fabian Althaus
title: LilyPad Slide Switch
date: 2013-05-26
path: core/LilyPad-slide-switch13.fzp
description:
This is a simple slide switch for the LilyPad. Use it as a simple ON/OFF switch, or to control LEDs, buzzers, sensors, etc.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles.

Dimensions:

7.75x18.1mm
Thin 0.8mm PCB


moduleID: RioRand_LM2596_4d4c679376dd350f31d88f2a45c5c688_11
family: //obsolete//converter
version: 4
replacedby: RioRand_LM2596_94ce9810d0922bc731e2f315085d46ab_1
fritzingversion: 0.1.1201
author: Jenny Madorsky
title: RioRand LM2596
label: LM2596
spice: R{instanceTitle} {net connector0} {net connector1} {resistance}
taxonomy: discreteParts.resistor.220
path: obsolete/RioRand_LM2596_4d4c679376dd350f31d88f2a45c5c688_11.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Step-down DC-DC Converter</p></body></html>


moduleID: mp3-trigger-v22
family: audio playback
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: MP3 Trigger
date: 2011-07-08
path: core/mp3-trigger-v22.fzp
description:
<p>


	<span style="font-weight: bold;">Description: </span>Created in collaboration with Jamie Robertson, the MP3 Trigger is quite possibly the most versatile, low-cost, low power embedded MP3 Player. The board has 18 external trigger pins that will directly trigger pre-selected MP3 tracks, and a full-duplex serial control port that provides full transport control, remote triggering for up to 256 tracks, and fast real-time volume control. The board plays the MP3 files directly from a FAT16 microSD flash card and supports 192Kbps stereo playback. There is also an on-board navigation switch for local access and playback of all MP3 tracks on the flash card.</p>


<p>


	New for version 2: Aside from more than doubling the number of trigger inputs, the MP3 Trigger v2 now contains a resident bootloader that enables firmware updates directly from the microSD card without requiring a hardware programmer. The <a href="http://www.cypress.com/?id=2522" target="_blank">PSoC Designer IDE</a> can be used to generate hex files for the bootloader. See the datasheet below for more details on how to use the bootloader.</p>


<p>


	Firmware version 2&nbsp;also incorporates &ldquo;Quiet Mode&rdquo;, a new feature&nbsp;that can be enabled via the serial control port. In this mode, the triggers don&rsquo;t start tracks directly, but instead produce a serial message indicating which triggers were activated. A host microcontroller (<a href="http://www.sparkfun.com/commerce/product_info.php?products_id=666" target="_blank">Arduino</a>, for example) can thus monitor the trigger inputs and then start any track or sequence of tracks via the serial control port, making the triggers much more flexible.</p>


<p>


	The board uses a Cypress PSoC CY8C29466-24SXI microcontroller and a VLSI VS1053 audio codec.</p>


<p>


	Board can be powered by an external wall wart, FTDI Basic, or raw 3.3V input (see related items below).</p>


<p>


	<strong>Firmware update 2.40 Beta:</strong> Check it out <a href="http://makerjam.com/mp3-trigger/mp3-trigger-firmware-version-2-40-beta/" target="_blank">here</a> and be sure to leave feedback on the blog post.</p>


<p>


	<strong>Firmware update 2.23: compatible with 192kbps audio.</strong></p>


<p>


	We use the most up-to-date firmware on everything we ship out. However, if you have an older v2.xx model (or want to change the baud rate) and wish to have the newest firmware, you can get it <a href="http://makerjam.com/support/" target="_blank">here</a>.</p>


<p>


	Instructions on how to update your v2.xx firmware are in the <a classname="" href="http://www.sparkfun.com/datasheets/Widgets/MP3Trigger/MP3TriggerV2UserGuide_2010-07-30.pdf" target="_blank">datasheet</a>, but here&rsquo;s a quick review:</p>


<ol>


	<li>


		Download and unzip one of the files above.</li>


	<li>


		Copy the resulting hex file to a microSD card and rename it to: &ldquo;MP3TRIGR.HEX&rdquo;. It does not need to be the only file on the card &ndash; it just&nbsp;needs to have that&nbsp;precise filename.</li>


	<li>


		Insert the microSD card into your MP3 Trigger V2 and turn the power on while holding down the center navigation switch.</li>


	<li>


		Wait for the Status LED to go solid, then cycle the power. You&rsquo;re now running the new firmware.</li>


</ol>


<p>


	Please refer to the datasheet for a more detailed description of the Status LED indications when running the bootloader.</p>


<p>


	<span style="font-weight: bold;">Features:</span></p>


<ul>


	<li>


		Input voltage: 4.5-12VDC</li>


	<li>


		Current Consumption: 45mA idle, 85mA playing</li>


	<li>


		File system: FAT16</li>


	<li>


		Audio out: line level stereo (1/8&quot; stereo jack), see app note below if connecting to larger stereo jack</li>


	<li>


		Trigger inputs: 3.3-5V, active low inputs with internal pull-ups</li>


	<li>


		Serial: Full duplex, 8N1, 38.4K baud</li>


</ul>


<p>


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Widgets/MP3Trigger/MP3TriggerV2UserGuide_2010-07-30.pdf" target="_blank">Datasheet</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Widgets/MP3Trigger/mp3-trigger-v21i.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Widgets/MP3Trigger/vs10XXan_output.pdf">VLSI Application Note for protecting analog outputs</a></li>


	<li>


		<a href="http://makerjam.com/support/" target="_blank">Firmware Files</a></li>


</ul>


moduleID: 74xx08
family: 74xx
version: 4
author: Jozef
title: 74HC08 Logic AND Gate
label: IC
taxonomy: part.dip.14.pins
path: user/74xx08.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:9.75pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">IC containing quadruple 2-input positive-AND gates. </p></body></html>


moduleID: SparkFun-Connectors-M03-JST-PTH
family: sparkfun pin header
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Header 3
label: JP
date: 2013-02-13
path: core/sparkfun-connectors-m03-jst-pth.fzp
description:
<b>Header 3</b>
Standard 3-pin 0.1 header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). Molex polarized connector foot print use with SKU : PRT-08232 with associated crimp pins and housings.


moduleID: 4070_4_x_2_input_XOR_gate_multipart_subpart3
family: 40xx 4x2 input logic gate (multi-part)
version: 4
author: Stephen G. Parry
title: 4070 4 x 2 Input XOR Gate, multi-part
label: 2
taxonomy: part.dip.14.pins
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">4070 4 x 2 Input XOR Gate with sub-parts</span></p></body></html>

path:
C:/Users/jnoack/AppData/Roaming/Fritzing/partfactory/1416ce2b2368fabea276407ad0fa4d4f/core/4070_4_x_2_input_XOR_gate_multipart_subpart3.fzp


moduleID: Cherry-MX-Keyswitch_44a6316938b1b0a2c83ac0276dac5539_22
family: //obsolete//button
version: 4
replacedby: Cherry-MX-Keyswitch
fritzingversion: 0.7.2b
author: ml_
title: Cherry MX Keyswitch
label: S
path: obsolete/Cherry-MX-Keyswitch_44a6316938b1b0a2c83ac0276dac5539_22.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Cherry MX Keyswitch button for keyboards</p></body></html>


moduleID: SparkFun-DiscreteSemi-VARISTOR--0402
family: sparkfun varistor
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: VARISTOR
label: Z
date: 2013-02-13
path: core/sparkfun-discretesemi-varistor--0402.fzp
description:
<h3>Varistor</h3>
Varistor (Variable resistor) is a nonlinear resistive element of the
voltage dependence that resistance changes with applied voltage.
Varistor is equivalent with Zener diode of two series connection.


moduleID: SparkFun-Connectors-F25-VB
family: sparkfun db connector
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: F25
label: X
date: 2013-02-13
path: core/sparkfun-connectors-f25-vb.fzp
description:
25 Pin male connector. PCB edge mount for regular PCB thicknesses. This connector will connect directly to the back of a PC parallel port or through a normal DB25 extension cable (M/F). SKU: PRT-08287


moduleID: intel_edison_minibreakout_fix
family: microcontroller board (intel)
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: EDISON
label: U
date: 2014-11-20
path: core/intel_edison_minibreakout_fix.fzp
description:
The Intel® Edison is a compact computing platform that's small by design so you can easily integrate it into projects.  It's primarily designed for "Internet of Things" projects and is pretty powerful for its small size. 

The Edison has a bunch of features that makes it appealing for makers of all skill levels.  It uses a 22 nm Intel SoC that includes a dual core, dual threaded Intel Atom CPU at 500MHz and a 32-bit Intel® Quark microctroller which runs at 100 MHz.  It's a lot of power for a board that's about the size of an LED Matrix.

The board supports 40 GPIOs and includes 1 GB LPDDR3, 4 GB EMMC, and has dual-band WiFI and BTLE - which makes it essentially wireless.

The tiny Edison fits nicely onto a breakout board - sort of like a tiny IoT sparrow into a very small nest - so you can expose the native 1.8 V I/O of the Edison.  The breakout board has a power supply, USB serial, USB OTG port and power switch, an I/O header, and a battery charger.  Together, there's seamless device-to-device and device-to-cloud communication.


moduleID: MPR121-Breakout-v13
family: sparkfun
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: fabian althaus
title: MPR121 Breakout
date: 2014-06-14
path: core/MPR121-Breakout-v13.fzp
description:
This is a breakout board for Freescale’s MPR121QR2. The MPR121 is a capacitive touch sensor controller driven by an I2C interface. The chip can control up to twelve individual electrodes, as well as a simulated thirteenth electrode. The MPR121 also features eight LED driving pins. When these pins are not configured as electrodes, they may be used to drive LEDs.

There a four jumpers on the bottom of the board, all of which are set (closed) by default. An address jumper ties the ADD pin to ground, meaning the default I2C address of the chip will be 0x5A. If you need to change the address of the chip (by shorting ADD to a different pin), make sure you open the jumper first. Jumpers also connect SDA, SCL and the interrupt pin to 10k pull-up resistors. If you don’t require the pull-up resistors you can open the jumpers by cutting the trace connecting them.

There is no regulation on the board, so the voltage supplied should be between 2.5 and 3.6VDC. The VREG pin is connected through a 0.1uF capacitor to ground, which means, unless you modify the board, you can’t operate the MPR121 in low-supply voltage mode (1.71-2.75VDC).


moduleID: SparkFun-Connectors-M10X2-2X10_LOCK
family: sparkfun pin header
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: M10X2
label: U
date: 2013-02-13
path: core/sparkfun-connectors-m10x2-2x10_lock.fzp
description:
This was SPECIALLY designed to be used with our Graphic LCD Backpack.  Be sure you want to use this!  It is not only staggered on each line of header holes, but IT IS ALSO offset of the center point of the top and bottom lines by 5 mil.  This causes the headers to lock into place on the standard footprint on the LCD screen.  The extra squares on the tdocu layer are there simply to reference other pins (if you were to actually populate a longer header than ten long - this is what we do with the backpacks).


moduleID: PowerCell-v13
family: power cell lipo charger/booster
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SFE and Fritzing
title: Power Cell LiPo Charger/Booster
date: 2014-11-03
path: core/PowerCell Lipo Charger Booster v13.fzp
description:
The PowerCell board is a single cell LiPo boost converter (to 3.3V and 5V) and micro-USB charger in one. The board comes with a JST connector for a single cell LiPo battery, a micro-USB connector for the 5V charge input, and selectable 3.3V and 5V output pins (labeled ‘out’). There are also two charge pins broken out (labeled ‘charge’), so you can use another 5V power source to charge the batteries, if you don’t have a micro-USB cable.
We’ve also broken out the power-save and enable pins, so that you can have full control of the switching regulator. Keep in mind, if you keep your battery connected to the Powercell, it is recommended that you disable the switching regulator (pull EN low) in order to prevent the battery from discharging and reaching the under voltage cutoff on the battery itself. There is also an under-voltage lockout on the Powercell board which is tied to a solder jumper so that you can disable it if you like.
The micro-USB charger uses the MCP73831 and allows you to charge 3.7V LiPo cells at a rate of 100mA max. If you want to charge at a faster rate, you will need to connect a separate power supply to the pins labeled ‘5V’ and ‘GND’ under the label ‘charge’.
The boost converter is based on the TPS61200 from TI and has solder jumper selectable 5V and 3.3V output, and an under voltage protection of 2.6V (which can be disabled via solder jumper on the back of the PCB).
Note: This board does not have reverse polarity protection, so please be sure to recognize the polarity of your connections!

Dimensions: 1.03 x 0.95"

Features:

- MCP73831 Single Cell LiPo charger at 500mA
- TPS61200 Boost Converter
- Selectable output voltage 3.3 or 5V
- 5V @ 600mA max
- 3.3V @ 200mA max
- Undervoltage lock out at 2.6V (with disable jumper)
- Quiescent current, less than 55uA
- JST connector for LiPo battery
- micro-USB connector for charge power source
- Inductor: 4.7uH, 1.2A Sumida CDRH2D18
- Over temperature protection


moduleID: Arduino-Pro-Mini3.3V
family: microcontroller board (arduino)
version: 14
fritzingversion: 0.5.2b.02.18.4756
author: f.althaus
title: Arduino Pro Mini (3.3V)
date: 2015-10-04
path: core/Arduino-Pro-Mini_3.3v-v14.fzp
description:
It’s blue! It’s thin! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Uno R3. It’s a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (3.3V), lack of connectors, and USB off board.

We really wanted to minimize the cost of an Arduino. In order to accomplish this we used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you’re supplying unregulated power to the board, be sure to connect to the “RAW” pin on not VCC.

The latest and greatest version of this board breaks out the ADC6 and ADC7 pins as well as adds footprints for optional I2C pull-up resistors! We also took the opportunity to slap it with the OSHW logo.


moduleID: pinoccio_board
family: pinocc.io
version: 4
fritzingversion: 0.9.0b.02.18.4756
author: f.althaus
title: pinocc.io scout
date: 2014-09-10
path: core/pinoccio.fzp
description:
The Arduino-compatible atomic unit of Pinoccio: Every Field Scout can talk to any other Field Scout via radio (up to about 100m away). The built-in temperature sensor and RGB LED are perfect for starter projects.


moduleID: usb_3.0_female
family: //obsolete//sparkfun usb connector
version: 4
replacedby: usb_3.0_female_fix
fritzingversion: 0.7.2b
author: www.fritzing.org
title: USB Connectors
label: X
path: obsolete/usb_3.0_female.fzp
description:
<b>USB Connectors</b>
<p>USB-B-PTH is fully proven SKU : PRT-00139
<p>USB-miniB is fully proven SKU : PRT-00587
<p>USB-A-PCB is untested.
<p>USB-A-H is throughly reviewed, but untested. Spark Fun Electronics SKU : PRT-00437
<p>USB-B-SMT is throughly reviewed, but untested. Needs silkscreen touching up.
<p>USB-A-S has not been used/tested
<p>USB-MB-H has not been used/tested


moduleID: 4077_4_x_2_input_XNOR_gate_multipart
family: 40xx 4x2 input logic gate (multi-part)
version: 4
author: Stephen G. Parry
title: 4077 4 x 2 Input XNOR Gate, multi-part
label: IC
taxonomy: part.dip.14.pins
path: core/4077_4_x_2_input_XNOR_gate_multipart.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">4077 4 x 2 Input XNOR Gate with sub-parts</span></p></body></html>


moduleID: SI4735 Shield-v13
family: radio
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Si4735 AM & FM Receiver Shield
date: 2011-11-29
path: core/SI4735 Shield-v13.fzp
description:
<p>


	<strong>Description:</strong> The Si4735 is the first digital CMOS AM/FM radio receiver IC that integrates the complete tuner function from antenna input to audio output. This feature-rich solution includes advanced seek algorithms, soft mute, auto-calibrated digital tuning, and FM stereo processing. The chip also incorporates a digital processor for the European Radio Data System (<a href="http://en.wikipedia.org/wiki/Radio_Data_System" target="_blank">RDS</a>) and the North American Radio Broadcast Data System (<a href="http://en.wikipedia.org/wiki/RBDS" target="_blank">RBDS</a>), including all required symbol decoding, block synchronization, error detection, and error correction functions. Basically it&#39;s an entire AM/FM, LW/SW radio in a single chip.</p>


<p>


	Now that we&#39;ve mounted it on a shield, you can harness all of that sweet radio-playing power right from your Arduino. Simply stack the shield onto your Arduino board, plug in some speakers (headphones don&#39;t seem to work as well without a preamp) and use the library below to control the volume, channel selection, etc. The library also allows you to send a variety of other commands constructed by consulting the Si4735 Programmers Guide.</p>


<p>


	This board seems to get decent reception compared to other stereos around the office even using a simple wire antenna. If you happen to have an antenna that you&#39;d like to use it can be soldered right to the via marked &quot;antenna&quot;.</p>


<p>


	<strong>Documents: </strong></p>


<ul>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/SI4735 Shield-v13.pdf" target="_blank">Schematic </a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/SI4735 Shield-v13.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/Si4735 Datasheet.pdf" target="_blank">Datasheet</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/Si4735.zip" target="_blank">Arduino Library</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/Si4735 Programming Guide.pdf" target="_blank">Programming Guide</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/RBDS Standard.pdf" target="_blank">RBDS Standard</a></li>


</ul>


moduleID: LilyPad_LED-v14
family: microcontroller board (lilypad)
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: f.althaus
title: LilyPad LED
date: 2013-05-25
path: core/LilyPad_LED-v14.fzp
description:
A simple, very bright, 250mcd, white LED LilyPad. Light up the night!

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles.

Dimensions:

5x11mm
Thin 0.8mm PCB


moduleID: RioRand_LM2596_94ce9810d0922bc731e2f315085d46ab_1
family: converter
version: 4
fritzingversion: 0.9.3b
author: Jenny Madorsky (modified by Peter Van Epp)
title: RioRand LM2596
label: M
path: core/RioRand_LM2596_94ce9810d0922bc731e2f315085d46ab_1.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Step-down DC-DC Converter</p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">
(modified to correct all views by Peter Van Epp january 2018)</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Corrected the pins so the part works in all views. Changed the sizes in bb and pcb to match the data sheet. PCB view had a small outline (possibly only for wires), changed it to pads in the same places as the module and added holes in the PCB silkscreen layer where the mounting holes on the module are (you need to check the alignment though as they are not fully specified on the drawing I used and I don't have one ...). so that you could mount the module on standoffs on a board. The mounting holes are only on silksceen, you need to drag a hole of the correct size over them if you want a hole in the actual board.</p><></body></html>


moduleID: PowerSupply-Lipo-v15
family: microcontroller board (lilypad)
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: f.althaus
title: LilyPad LiPower
date: 2013-05-26
path: core/PowerSupply-Lipo-v15.fzp
description:
A small, but very mighty power supply. This board was designed to be as small and inconspicuous as possible. The nice thing about LiPower is the ability to use rechargable Lithium Polymer batteries. These batteries are smaller, flatter, and last much longer than a AAA battery. Attach a single cell LiPo battery, flip the power switch, and you will have a 5V supply to power your LilyPad network. Good up to 150mA. Short circuit protected.



This board has a JST connector, which will connect to our JST terminated single cell 3.7V LiPo batteries. It also has terminals for charging the LiPo battery with one of our LiPo chargers.



LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable - but be sure to remove the battery!



Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles.



Dimensions:



18mm outer diameter

Thin 0.8mm PCB


moduleID: 74HC139N_fa229dffcda5c58d9e589070e2239d6d_1
family: 74xx
version: 4
author: Christoph Rieder
title: 74HC139N
label: 74HC139N
taxonomy: part.dip.16.pins
path: core/74HC139N_1.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">A Dual 2 to 4 DEMX / Decoder</p></body></html>


moduleID: Eric_d0eaed56260dd65e5641982bd03333c7_5
family: //obsolete//blend micro
version: 6
replacedby: Blend_Micro_1.0
fritzingversion: 0.5.2b.02.18.4756
author: Pawel Szymczykowski
title: Blend Micro v1.0
path: obsolete/Eric_d0eaed56260dd65e5641982bd03333c7_5.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'.Helvetica Neue DeskInterface'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Blend Micro is a RedBearLab Arduino at Heart integrated development board, they have &quot;blend&quot;ed Arduino with Bluetooth 4.0 Low Energy (aka BLE or Bluetooth Smart) into a single board. It is targeted for makers to develop low power Internet-Of-Things (IoT) projects quickly and easily.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The micro-controller unit (MCU) is Atmel ATmega32u4 and the BLE chip is Nordic nRF8001. Blend Micro runs as BLE peripheral role only, it allows BLE central role devices to establish connection with.</p></body></html>


moduleID: Proto_shield_REV3
family: arduino shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Arduino
title: Arduino Prototyping Shield
date: 2012-03-10
path: core/Proto_shield_REV3.fzp
description:
The Arduino Prototyping Shield makes it easy for you to design custom circuits. You can solder parts to the prototyping area to create your project, or use it with a small solderless breadboard (not included) to quickly test circuit ideas without having to solder. It's got extra connections for all of the Arduino I/O pins, and it's got space to mount through-hole and surface mount integrated circuits. It's a convenient way to make your custom circuit and Arduino into a single module.


moduleID: Arduino_MEGA_2560-Rev3(fix)
family: microcontroller board (arduino)
version: 5
fritzingversion: 0.5.2b.02.18.4756
author: althaus
title: Arduino Mega 2560 (Rev3)
date: 2013-04-03
path: core/Arduino_MEGA_2560-Rev3(fix).fzp
description:
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.
The Mega 2560 is an update to the Arduino Mega, which it replaces.
The Mega2560 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the ATmega16U2 programmed as a USB-to-serial converter.

Revision 3 of the board has the following new features:
1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Arduino Due that operate with 3.3V. The second one is a not connected pin, that is reserved for future purposes.
    Stronger RESET circuit.
    Atmega 16U2 replace the 8U2.


moduleID: SparkFun-DigitalIC-DOSONCHIP-IC-LQFP
family: sparkfun data storage ic
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: DOSonCHIP IC
label: U
date: 2013-02-13
path: core/sparkfun-digitalic-dosonchip-ic-lqfp.fzp
description:
<b>DOSonCHIP IC</b>
This is the tested schematic and footprint for the DOSonCHIP FAT16 FAT32 IC. Spark Fun Electronics SKU : COM-07956. QFN package also tested/proven.


moduleID: TB6612FNG Breakout v11
family: motor driver 1a dual tb6612fng
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SFE and Fritzing
title: Motor Driver 1A Dual TB6612FNG
date: 2014-11-03
path: core/Motor Driver 1A Dual TB6612FNG v11.fzp
description:
The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.

Logic supply voltage (VCC) can be in the range of 2.7-5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse).

Board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1" pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other.

Features:
- Power supply voltage: VM=15V max, VCC=2.7-5.5V
- Output current: Iout=1.2A(average) / 3.2A (peak)
- Standby control to save power
- CW/CCW/short brake/stop motor control modes
- Built-in thermal shutdown circuit and low voltage detecting circuit
- All pins of the TB6612FNG broken out to 0.1" spaced pins
- Filtering capacitors on both supply lines


moduleID: 4077_4_x_2_input_XNOR_gate_multipart_subpart1
family: 40xx 4x2 input logic gate (multi-part)
version: 4
author: Stephen G. Parry
title: 4077 4 x 2 Input XNOR Gate, multi-part
taxonomy: part.dip.14.pins
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">4077 4 x 2 Input XNOR Gate with sub-parts</span></p></body></html>

path:
C:/Users/jnoack/AppData/Roaming/Fritzing/partfactory/1416ce2b2368fabea276407ad0fa4d4f/core/4077_4_x_2_input_XNOR_gate_multipart_subpart1.fzp


moduleID: SparkFun_MIDI_Shield
family: sparkfun shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: f.althaus
title: SparkFun MIDI Shield
date: 2015-10-04
path: core/SparkFun_MIDI_Shield.fzp
description:
 The SparkFun MIDI Shield board gives your Arduino access to the antiquated, but still widely used and well supported MIDI communication protocol, so you can control synthesizers, sequencers, and other musical devices. The MIDI protocol shares many similarities with standard asynchronous serial interfaces, so you can use the UART pins of your Arduino to send and receive MIDI’s event messages.


moduleID: e92ccfe0-3e83-4646-89d9-916162578685
family: diode
version: 4
fritzingversion: 0.3.18
author: Mr.T
title: Schottky Diode
label: D
date: 2011-01-07
description: A standard schottky barrier rectifier diode
spice: D{instanceTitle} {net connector1} {net connector0} DI_1N5817
path: core/SMD_Diode_STK_DO.fzp
spicemodel:
*SRC=1N5817;DI_1N5817;Diodes;Si;  20.0V  1.00A  3.00us   Diodes Inc. Schottky Barrier Rectifier
.MODEL DI_1N5817 D  ( IS=870u RS=81.3m BV=20.0 IBV=1.00m CJO=203p  M=0.333 N=1.81 TT=4.32u )


moduleID: Taiway-100-SP-X-T1-X-X-B1-M1_SPDT_miniature_toggle_switch_body
family: taiway 100 series switch
version: 4
fritzingversion: 0.1.1255
author: Stephen Parry
title: Taiway 100-SP-X-T1 SPDT Miniature Toggle Switch
label: S
path: core/Taiway-100-SP-X-T1-X-X-B1-M1_SPDT_miniature_toggle_switch_body.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Taiway SP1-T1 SPDT Miniature Toggle Switch.</p>
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">This switch has two or three positions, the function of which varies depending on the exact model:</p>
<table border="1" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0">
<tr>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"></p></td>
<td colspan="3">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Position</p></td></tr>
<tr>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Model</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">\_</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">_|_</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">_/</p></td></tr>
<tr>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">SP-1</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">On</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">None</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">On</p></td></tr>
<tr>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">SP-2</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">On</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">None</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">(On)</p></td></tr>
<tr>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">SP-3</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">On</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Off</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">On</p></td></tr>
<tr>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">SP-4</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">(On)</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Off</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">(On)</p></td></tr>
<tr>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">SP-5</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">On</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Off</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">(On)</p></td></tr></table>
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">This part will suffice for all 5 model variations, but is important the designer specifies clearly which model is intended.</p>
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The breadboard view is rendered as non-perspective top projection for layout on stripboard or similar.</p>
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">There are four Fritzing variants of this part:</p>
<table border="1" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0">
<tr>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Variant</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Part Suffix</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Description</p></td></tr>
<tr>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">1</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">-M1</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Solder lug terminals mounted through hole</p></td></tr>
<tr>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">2</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">-M2</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">PC terminals mounted through hole</p></td></tr>
<tr>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">3</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">n/a</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Switch mounted through board , upper actuator part, no electrical connections.</p></td></tr>
<tr>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">4</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">-M1 or -M5</p></td>
<td>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Switch mounted through board, lower body part, with solder lug or wire wrap electrical connections.</p></td></tr></table>
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">A complete through board switch can be made using a combination of variants 3 and 4. This variant is variant 4.</p></body></html>


moduleID: SparkFun-DigitalIC-CP2103_USB_UART-
family: sparkfun usb ic
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Single-Chip USB to UART Bridge
label: IC
date: 2013-02-13
path: core/sparkfun-digitalic-cp2103_usb_uart-.fzp
description:
<b>Single-Chip USB to UART Bridge</b>
Source: www.silabs.com .. CP2103.pdf. Spark Fun Electronics SKU : COM-00309


moduleID: AnalogDevices_SSM2220S_subpart3
family: adi-transistor
version: 4
fritzingversion: 0.7.12b.02.13.6882
author: Analog Devices
title: SSM2220 - Audio Dual Matched PNP Transistor
label: 3
path:
C:/Users/jnoack/AppData/Roaming/Fritzing/partfactory/1416ce2b2368fabea276407ad0fa4d4f/core/AnalogDevices_SSM2220S_subpart3.fzp


moduleID: 4071_4_x_2_input_OR_gate_single
family: 40xx 4x2 input logic gate (single part)
version: 4
author: Stephen G. Parry
title: 4071 4 x 2 Input OR Gate, single part
label: IC
taxonomy: part.dip.14.pins
path: core/4071_4_x_2_input_OR_gate_single.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">4071 4 x 2 Input OR Gate as a single part</span></p></body></html>


moduleID: atlas-sientific_Conductivity Circuit
family: conductivity
fritzingversion: 0.4.1b.07.17.4356
author: Atlas Scientific
title: Conductivity Circuit
label: Conductivity Circuit
path: core/atlas-sientific_Conductivity Circuit.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">There was a time when manufacturing custom scientific equipment for a project was only available to the elite; a time when environmental data was only available to governments and subject to the political pressures of the day. Atlas Scientific is working hard to end those days. We are the new scientists, all of us. Reading the Electrical Conductivity (E.C.), total dissolved solids and salinity of water, was notoriously hard to do. With little information available on the subject, many engineers had to abandon their goal of adding a conductivity circuit to their design. Atlas Scientific has finally put an end to this problem.</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">The Atlas Scientific Conductivity Circuit is small, modularized, and designed specifically to read the conductivity, total dissolved solids and salinity of water.</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">The Atlas Scientific Conductivity Circuit is designed for both continuous and intermittent readings. After calibration, the Conductivity Sensor can be immersed in a liquid and operate continuously for 12 months before recalibration is recommended.</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Conductivity readings +/- 5μs</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Full Conductivity capability from 11μs to 92,000μs</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Temperature dependent or temperature independent readings</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Total dissolved solids (TDS) referenced to KCL</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Salinity is derived from the Practical Salinity Scale (PSS-78)</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Data output is a comma separated string: μs, TDS, Salinity</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Single reading or continuous reading modes</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Simple asynchronous serial connectivity (voltage swing 0-5v)</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Simple instruction set consisting of only 6 (not including   calibration) commands</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Micro footprint circuitry</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Debugging LED's</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• 5V operational voltage</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Dimensions: 18.4mm X 20.56mm (0.72&quot; X0.80&quot;)</span></p></body></html>


moduleID: SparkFun-Connectors-M01-SNAP-MALE
family: sparkfun pin header
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Header 1
label: JP
date: 2013-02-13
path: core/sparkfun-connectors-m01-snap-male.fzp
description:
<b>Header 1</b>
Standard 1-pin 0.1 header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115).


moduleID: 1e03b5a6-ed62-11dd-b332-001a4d5c439f
family: //obsolete//mystery part
version: 1
replacedby: mystery_part_4
author: Fritzing Part-o-matic
title: Mystery Part - 4 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.4pins
path: obsolete/mystery_part4.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 4 pins on a 100 mil inline pin header footprint.


moduleID: atlas-sientific_Serial Port Connector
family: connector
fritzingversion: 0.4.1b.07.17.4356
author: Atlas Scientific
title: Serial Port Connector
label: Serial Port Connector
path: core/atlas-sientific_Serial Port Connector.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">Need to connect multiple devices to a single UART (RX/TX) line? This Serial Port Connector (Multiplexer) will enable you to do just that, connect up to 4 devices into a single microcontrollers RX/TX pins.• Easily connect up to 4 asynchronous serial devices into a    microcontrollers single UART RX/TX pins</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Simple layout designed for rapid implementation.</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Sample code</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Wiring diagram</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Easy to use</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Header pins included (not soldered)</span></p></body></html>


moduleID: AnalogDevices_OP482GPZ
family: adi-opamp-quad
version: 1
fritzingversion: 0.7.12b.02.13.6882
author: Analog Devices
title: OP482 - Low Power, High Speed JFET Quad Operational Amplifier
label: U
path: core/ADI_OP482.AnalogDevices_OP482GPZ.fzp
spice:
X{instanceTitle}A {net connector3} {net connector2} {net connector4} {net connector11} {net connector1} OP482


moduleID: I2C_level_converter_444e27d4b4b231371fe2ccfc428902c1_1
family: level shifter
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Jungho Park
title: I2C level shifter bidirectional
path: core/I2C level shifter bidirectional.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">This is an interface board to connect 5V I2C to 3V I2C. It is bidirectinal.</p></body></html>


moduleID: PowerIR-v11
family: ir
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Max Power IR LED Kit
date: 2011-11-29
path: core/PowerIR-v11.fzp
description:
<p>


	<strong>Description:</strong> Infrared LEDs are awesome. Along with an IR receiver they can be used for remote control and even basic remote data communication. The only problem is that your Arduino won&#39;t drive them to their full potential. The Max Power IR LED kit solves this problem by providing you with everything you need to drive a 950nm IR LED properly. Simply solder together this easy through-hole kit and you can switch the LED using a transistor.</p>


<p>


	Once the kit is assembled, simply provide it with voltage (5V), ground, and connect the CTL pin to a digital pin on your Arduino, and you can drive this kit just like a normal LED.&nbsp; Although the LED won&#39;t be visible to your naked eye, you can use a video camera, cell phone camera, or digital camera to see if the LED is working properly.</p>


<p>


	<strong>Note:</strong> This revision fixes our mistake from the last version and should now source the 50mA maximum current that the LED is rated for.</p>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Kits/PowerIR-v11.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Kits/PowerIR-v11.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Sensors/Infrared/YSL-R531FR1C-F1.pdf" name="" target="_blank">Datasheet</a> (IR LED)</li>


</ul>


<p>


	<strong>Replaces:</strong> <a href="http://www.sparkfun.com/products/10662" target="_blank">KIT-10662</a></p>


moduleID: Si470x-Eval-v11
family: radio breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Digital FM Radio Receiver
date: 2011-07-08
path: core/Si470x-Eval-v11.fzp
description:
<p>


	<strong>Description:</strong> This is a breakout board for the Silicon Laboratories Si4703 FM tuner chip. Beyond being a simple FM radio, the Si4703 is also capable of detecting and processing both Radio Data Service (RDS) and Radio Broadcast Data Service (RBDS) information. The Si4703 even does a very good job of filtering and carrier detection. It also enables data such as the station ID and song name to be displayed to the user.</p>


<p>


	Using this board we are able to pick up multiple stations just as well as with a standard FM radio. The board breaks out all major pins and makes it easy to incorporate this great chip into your next radio project. Also, by plugging headphones into the 3.5mm audio jack, you effectively use the cable in your headphones as an antenna! Therefore, this board does not require an external antenna if using headphones or a 3.5mm audio cable longer than 3 feet.</p>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/BreakoutBoards/Si470x-Eval-v11.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/BreakoutBoards/Si470x-Eval-v11.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/BreakoutBoards/Si4702-03-C19-1.pdf">Datasheet</a> (Si4703)</li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/BreakoutBoards/tpa6111a2.pdf" target="_blank">Datasheet</a> (TPA6111A2)</li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/BreakoutBoards/Si4703_Example.pde" target="_blank">Arduino Example Code</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/BreakoutBoards/AN230_0.61.pdf" target="_blank">Programming Guide</a></li>


</ul>


<p>


	<strong>Replaces:</strong> <a href="http://www.sparkfun.com/products/8972" target="_blank">WRL-08972</a></p>


moduleID: NRF24L01+_breakout
family: 2.4ghz transceiver
version: 5
fritzingversion: 0.5.2b.02.18.4756
author: Richard Bruneau, Fabian Althaus
title: NRF24L01+ Breakout Board
path: core/NRF24L01+_breakout.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">This breakout board is for the Nordic Semiconductor NRF24L01+ 2.4GHz RF transceiver IC.</p></body></html>


moduleID: red_led_matrix8x8
family: matrix display
version: 4
fritzingversion: 0.2.2.b.03.04.2550
author: Stefan Hermann
title: LBT2088AH
label: Disp
path: core/LBT2088AH.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">LED Matrix Display 8x8 red 60.5mm	</p></body></html>


moduleID: LED-SMD_RGB(WS2812)
family: sparkfun led
version: 4
fritzingversion: 0.7.2b
author: fabian althaus
title: SMD RGB LED (WS2812)
label: RGB SMD LED
date: 2013-09-17
path: core/sparkfun-led-WS2812.fzp
description:
The WS2812 is an RGB LED with a WS2811 control IC built right into the LED. This really blew our minds to see the control IC of an individually addressable RGB LED was moved into the actual LED, so we wanted to offer this amazing product to you! They're great when you need a lot of color from not a lot of board space, now more so than ever.


moduleID: mcp3008
family: generic a2d
version: 1
fritzingversion: 0.7.2b
author: ravi.csin@gmail.com
title: MCP3008
label: ADC
path: core/mcp3008.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">2.7V 4-Channel/8-Channel 10-Bit A/D Converters with SPI Serial Interface</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The Microchip Technology Inc. MCP3004/3008</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">devices are successive approximation 10-bit Analog-</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">to-Digital (A/D) converters with on-board sample and</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">hold circuitry. The MCP3004 is programmable to</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">provide two pseudo-differential input pairs or four</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">single-ended inputs. The MCP3008 is programmable</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">to provide four pseudo-differential input pairs or eight</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">single-ended inputs. Differential Nonlinearity (DNL)</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">and Integral Nonlinearity (INL) are specified at ±1 LSB.</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Communication with the devices is accomplished using</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">a simple serial interface compatible with the SPI</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">protocol. The devices are capable of conversion rates</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">of up to 200 ksps. The MCP3004/3008 devices operate</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">over a broad voltage range (2.7V - 5.5V). Low-current</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">design permits operation with typical standby currents</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">of only 5 nA and typical active currents of 320 μA. The</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">MCP3004 is offered in 14-pin PDIP, 150 mil SOIC and</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">TSSOP packages, while the MCP3008 is offered in 16-</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">pin PDIP and SOIC packages.</p></body></html>


moduleID: ds1809_ic_dip
family: ds1806
version: 4
author: Fritzing Part-o-matic
title: DS1809
label: DS1809
path: core/ds2809_ic.fzp
description:
The DS1809 Dallastat is a nonvolatile digitally controlled potentiometer that provides 64 uniform wiper
positions over the entire resistor range; including the high-end and low-end terminals of the device. The
DS1809 is a low-power device capable of operating from power supplies of +4.5V to +5.5V. The device
is ideal for low-power, portable, or battery powered applications.


moduleID: SparkFun-Connectors-M04-JST-PTH
family: sparkfun pin header
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Header 4
label: JP
date: 2013-02-13
path: core/sparkfun-connectors-m04-jst-pth.fzp
description:
<b>Header 4</b>
Standard 4-pin 0.1 header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208


moduleID: SparkFun_BadgerArray
family: sparkfun badger
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: f.althaus
title: LED BadgerArray
date: 2015-10-31
path: core/SparkFun_BadgerArray.fzp
description:
Interactive Badges -Charlieplexed 8x7 LED Array

Charlieplexed 8x7 LED array to be used with the Interactive Badges for SXSW 2015.



Please check out the BadgerHack Tutorial for more information. The accompanying badges' information can be found here. The BadgerHack Demos are available here.


moduleID: Adafruit_HUZZAH_ESP8266_Breakout_c78691c8aa42e23bb46af61759de99b8_1
family: //obsolete//breakout boards
version: 4
replacedby: huzzah_esp8266
fritzingversion: 0.7.12b.02.13.6882
author: pkurtans
title: Adafruit HUZZAH ESP8266 Breakout
label: Adafruit HUZZAH ESP8266 Breakout
path: obsolete/Adafruit_HUZZAH_ESP8266_Breakout_c78691c8aa42e23bb46af61759de99b8_1.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The HUZZAH ESP8266 breakout is what we designed to make working with this chip super easy and a lot of fun. We took a certified module with an onboard antenna, and plenty of pins, and soldered it onto our designed breakout PCBs. We added in:</p>
<ul style="margin-top: 0px; margin-bottom: 0px; margin-left: 0px; margin-right: 0px; -qt-list-indent: 1;"><li style=" margin-top:12px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Reset button,</li>
<li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">User button that can also put the chip into bootloading mode,</li>
<li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Red LED you can blink</li>
<li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Level shifting on the UART and reset pin</li>
<li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">3.3V out, 500mA regulator (you'll want to assume the ESP8266 can draw up to 250mA so budget accordingly)</li>
<li style=" margin-top:0px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Two diode-protected power inputs (one for a USB cable, another for a battery) </li></ul></body></html>

spice:
X{instanceTitle} {net connector1} {net connector2} {net connector3} {net connector4} {net connector5} {net connector6} {net connector7} {net connector8} AD8210


moduleID: FT230XQ_df1159ec8af0eb336d7fbe6068d3aed4_2
family: usb to serial uart
version: 4
fritzingversion: 0.7.2b
author: Steven Vogel
title: FT230XQ
label: IC
path: core/FT230XQ_2.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The FT230X is a USB to serial UART interface with optimised pin count for smaller PCB designs.</p></body></html>


moduleID: DS2Y5DC5V
family: relay
version: 4
author: Christoph Wempe
title: DS2Y-5-DC5V
label: DS2Y-5-DC5V
path: core/DS2Y-5-DC5V.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Panasonic DS2Y-5-DC5V Relay with 2 form C contact</p></body></html>


moduleID: SparkFun-DigitalIC-FT232RL-BASIC-SSOP
family: sparkfun usb ic
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: USB UART
label: U
date: 2013-02-13
path: core/sparkfun-digitalic-ft232rl-basic-ssop.fzp
description:
<b>USB UART</b>
This is the simplified version of the FT232RL unit. Only what you need, nothing you don't. Spark Fun Electronics SKU : COM-00650


moduleID: Dagu_DGServo_9g_End_view
family: dagu dgservo 9g
version: 4
author: Stephen Parry
title: Dagu DGServo 9g (End View)
label: M
taxonomy: discreteParts.servo
path: core/Dagu DGServo 9g (End view).fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Dagu DGServo 9g (End View - Incl. PCB Connector)</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">The breadboard view is rendered as non-perspective end projection and is especially useful for representing the upper servo in the Dagu Pan and Tilt mechanism.</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">The female header connector normally attached to end of the servo wires, exists in Fritzing as a separate part in the Dagu bin. Simply plug the connector onto whichever header pins you are using, then attach the wires to the connector.</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p></body></html>


moduleID: SparkFun-RF-SI4700-SMD
family: sparkfun fm receiver
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Silicon Labs FM Receiver
label: U
date: 2013-02-13
path: core/sparkfun-rf-si4700-smd.fzp
description:
<b>Silicon Labs FM Receiver</b><p>
76-108 MHz FM band support with integrated VCO, automatic gain control, automatic frequency control and seek tuning.


moduleID: 2d3cbb853835749c51cc0d6e4bfd2c90
family: microcontroller board (basic stamp)
version: 4
fritzingversion: 0.3.17b.04.07.4081
author: Lionel Michel
title: BASIC Stamp 2e
label: BS
date: 2010-04-08
path: core/BASIC_Stamp_2e.fzp
description:
The BASIC Stamp 2e serves as the brains inside of electronics projects and applications that require a programmable microcontroller. It is able to control and monitor timers, keypads, motors, sensors, switches, relays, lights, and more. Programming is performed in an easy-to-learn language called PBASIC.


moduleID: 4081_4_x_2_input_AND_gate_single
family: 40xx 4x2 input logic gate (single part)
version: 4
author: Stephen G. Parry
title: 4081 4 x 2 Input AND Gate, single part
label: IC
taxonomy: part.dip.14.pins
path: core/4081_4_x_2_input_AND_gate_single.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">4081 4 x 2 Input AND Gate as a single part</span></p></body></html>


moduleID: SparkFun_Soil_Moisture_Sensor
family: sparkfun breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: f.althaus
title: Soil Moisture Sensor
date: 2015-10-31
path: core/SparkFun_Soil_Moisture_Sensor.fzp
description:
SparkFun Soil Moisture Sensor

The SparkFun Soil Moisture Sensor is a simple breakout for measuring the moisture in soil and similar materials. The soil moisture sensor is pretty straight forward to use. The two large exposed pads function as probes for the sensor, together acting as a variable resistor. The more water that is in the soil means the better the conductivity between the pads will be and will result in a lower resistance, and a higher SIG out.



To get the SparkFun Soil Moisture Sensor functioning all you will need is to connect the VCC and GND pins to your Arduino-based device (or compatible development board) and you will receive a SIG out which will depend on the amount of water in the soil. One commonly known issue with soil moisture senors is their short lifespan when exposed to a moist environment. To combat this, we’ve had the PCB coated in Gold Finishing (ENIG or Electroless Nickel Immersion Gold). We recommend either a simple 3-pin screw pin terminal or a 3-pin jumper wire assembly (both can be found in the Recommended Products section below) to be soldered onto the sensor for easy wiring.



Note: Check the Hookup Guide in the Documents section below for assembly and weatherproofing instructions as well as a simple example project that you can put to together yourself!


moduleID: LilyPad SimplePower-v13
family: microcontroller board (lilypad)
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Fabian Althaus
title: LilyPad Simple Power
date: 2013-05-26
path: core/LilyPad SimplePower-v13.fzp
description:
The LilyPad Simple Power is a board that lets you connect a battery (or other power source) and switch it on or off, that's it! We provide you with a JST connector and a slide switch. You can solder in your own surface mount (or through-hole) resistor in line with the output, or solder the jumper closed if you don't require a resistor.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!


moduleID: PocketBeagle
family: computer
version: 4
fritzingversion: 0.9.3
author: Jason Kridner + F.Althaus
title: PocketBeagle
path: core/PocketBeagle.fzp
description:
PocketBeagle® is an ultra-tiny-yet-complete Linux-enabled, community-supported, open-source USB-key-fob computer. PocketBeagle features an incredible low cost, slick design and simple usage, making PocketBeagle® the ideal development board for beginners and professionals alike. You develop directly in a web browser and PocketBeagle® can easily be set back to factory conditions, leaving you free to experiment.
 512MB DDR3 RAM integrated
Integrated power management
2×32-bit 200-MHz programmable real-time units (PRUs)
ARM Cortex-M3


moduleID: SparkFun-RF-GM862-GND
family: sparkfun cell module
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: GM862 Cellular Module with GPS
label: U
date: 2013-02-13
path: core/sparkfun-rf-gm862-gnd.fzp
description:
<b>GM862 Cellular Module with GPS</b>
Proven layout and schematic for GM862 cellular module with SiRF III GPS. Spark Fun Electronics SKU : CEL-07917


moduleID: c4256c251d53ee723058f86aa6d016a2
family: microcontroller board (gogoboard)
fritzingversion: 0.4.0b.06.21.4282
author: Lionel Michel
title: GogoBoard 4.0
label: GogoBoard 4.0
date: 2010-06-23
path: core/gogoboard 4.0.fzp
description:
The GoGo board framework is a collection of open-source hardware platforms mainly aimed for educational projects.


moduleID: SparkFun-PowerIC-ADM1087-SC-70
family: sparkfun voltage sequencer
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: ADM1087
label: U
date: 2013-02-13
path: core/sparkfun-poweric-adm1087-sc-70.fzp
description:
The ADM1085-ADM1088 are Simple Sequencing™ circuits which provide a time delay between the enabling of voltage regulators at power-up in multiple supply systems. When the output voltage of the first regulator reaches a preset threshold, a time delay is initiated before an enable signal allows subsequent regulators to power-up. Any number of these devices can be cascaded with regulators to allow sequencing of multiple power supplies.


moduleID: monacor_ltr_110_linetransformer
family: transformator
fritzingversion: 0.9.2b
author: Fabian Althaus
title: Monacor line transformer
label: LTR 110
date: 2015-11-15
path: core/monacor_ltr_110_linetransformer.fzp
description:
Monacor Line Transformator LTR-110.
            Frequency range: 15-30000 Hz
            Transmission ratio: 1: 1/2: 1
            Input Impedance: 600 Ohm
            Output Impedance: 600 Ohm / 300 Ohm
            Optimum source impedance: 50-600 Ohm
            Optimum load impedance:> = 5 kOhm
            Max. Input Voltage (1% THD / 40Hz): 5 V
            Dimensions: 25x19x19,5 mm
            Weight: 28 g


moduleID: AnalogDevices_AD8541ARZ
family: adi-opamp
version: 4
fritzingversion: 0.7.12b.02.13.6882
author: Analog Devices
title: AD8541 - CMOS Rail-to-Rail Op Amp
label: U
path: core/ADI_AD8541.AnalogDevices_AD8541ARZ.fzp
spice:
X{instanceTitle} {net connector3} {net connector2} {net connector7} {net connector4} {net connector6} AD8541


moduleID: Arduino_ADK_MEGA_2560-Rev3(fix)
family: microcontroller board (arduino)
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: althaus
title: Arduino Mega ADK (Rev3)
path: core/Arduino_ADK_MEGA_2560-Rev3(fix).fzp
description:
The Arduino ADK is a microcontroller board based on the ATmega2560 (datasheet). It has a USB host interface to connect with Android based phones, based on the MAX3421e IC. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.



The ADK is based on the Mega 2560.



Similar to the Mega 2560 and Uno, it features an ATmega8U2 programmed as a USB-to-serial converter.

Revision 2 of the MegaADK board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode.

Revision 3 of the board has the following new features:



    1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Arduino Due that operate with 3.3V. The second one is a not connected pin, that is reserved for future purposes.

    Stronger RESET circuit. 



For information on using the board with the Android OS, see Google's ADK documentation. 


moduleID: SparkFun-Connectors-RJ45-8-PTH_fix
family: sparkfun rj-xx jack
version: 5
fritzingversion: 0.7.2b
author: www.fritzing.org
title: RJ45 Jack
label: U
date: 2013-02-13
path: core/sparkfun-connectors-rj45-8-pth-fix.fzp
description:
<b>RJ45 Jack</b>
Simple RJ45, 8-pin connection - connector for common Cat5, Cat5e, and Cat6 Ethernet cables. Footprint not yet proven in production. Connector sku is PRT-00643; Breakout PCB sku is BOB-00716.


moduleID: linino_one_rev1
family: microcontroller board (linino)
fritzingversion: 0.9.0b
author: fabian_atlthaus
title: linino one
label: linino one
date: 2014-06-22
path: core/linino_one(rev1).fzp
description:
The Linino ™ ONE  is a MIPS board based on the Atheros AR9331 and the ATmega32u4 (datasheet). The Atheros processor supports Linino, a Linux distribution based on OpenWRT. The board has built-in WiFi support,  20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, 2 reset buttons and 1 user button.


moduleID: SparkFun-RF-BLUERADIO_BR-C40N-INT2
family: sparkfun bluetooth ic
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Bluetooth SMD Module
label: U
date: 2013-02-13
path: core/sparkfun-rf-blueradio_br-c40n-int2.fzp
description:
<b>Bluetooth SMD Module</b>
BR-C40A with antenna cut off. 50 Ohm antenna trace and connector required. Footprint fully proven. Spark Fun Electronics SKU : WRL-00149


moduleID: Arduino_Micro_Rev03
family: //obsolete//microcontroller board (arduino)
version: 4
replacedby: Arduino_Micro_Rev03(fix)
fritzingversion: 0.5.2b.02.18.4756
author: althaus
title: Arduino Micro (Rev3)
date: 2013-04-03
path: obsolete/Arduino_Micro_Rev03.fzp
description:
The Arduino Micro is a microcontroller board based on the ATmega32u4 (datasheet), developed in conjunction with Adafruit. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard.



The Micro is similar to the Arduino Leonardo in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. It also has other implications for the behavior of the board; these are detailed on the getting started page. 


moduleID: SparkFun-DigitalIC-WTV020SD-
family: sparkfun audio ic
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: WTV020SD
label: IC
date: 2013-02-13
path: core/sparkfun-digitalic-wtv020sd-.fzp
description:
SD audio playback IC<br>
Can play back .wav or .ad4 files from an SD card<br>
SPI control or digital input trigger control<br>
available in SSOP-20 or DIP-20


moduleID: 144096d13637627703324c683e3211ec_40
family: relay
version: 4
fritzingversion: 0.3.6b.08.14.3340
author: nail
title: OMRON PCB Power Relay – G5LE
label: OMRON
path: core/OMRON_G5LE.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">A Cubic, Single-pole 10-A Power Relay</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">- ROHS compliant</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">- Sub-miniature ‘sugar cube’ relay with universal terminal footprint</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">- Conforms to EN 61810-1, UL508, CSA22.2</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">- Tracking resistance: CTI&gt;250 (-VD type)</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">- UL class-F coil insulation model available (UL class-B coil insulation for standard model)</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">- High switching power: 10 A</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">- Two types of seal available; flux protection and fully sealed</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">- Withstands impulse of up to 4,500 V.VDE</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">- 400-mW and 360-mW coil power consumption types available</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">- Pre-soldered terminals</p></body></html>


moduleID: Dagu_DGServo_9g_header_male
family: dagu dgservo 9g header
version: 4
fritzingversion: 0.2.2.b.03.04.2550
author: Stephen Parry
title: Dagu DGServo 9g header (male)
label: J
path: core/Dagu DGServo 9g header (male).fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Dagu DGServo 9g header (male)</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">This part is a minor variation of the standard three pin header; in schematic view the pins have been labelled to show clearly pulse, Vcc and ground. Plug this header into a breadboard, stripboard or PCB to allow a servo header female connector plug (e.g. on the Dagu DGServo 9g) to be connected to the board.</p></body></html>


moduleID: AnalogDevices_AD8561ANZ
family: adi-comp
version: 4
fritzingversion: 0.7.12b.02.13.6882
author: Analog Devices
title: AD8561 - Ultrafast 7ns Single Supply Comparator
label: U
path: core/ADI_AD8561.AnalogDevices_AD8561ANZ.fzp
spice:
X{instanceTitle} {net connector1} {net connector2} {net connector0} {net connector3} {net connector4} {net connector5} {net connector6} {net connector7} AD8561


moduleID: 4071_4_x_2_input_OR_gate_multipart_subpart3
family: 40xx 4x2 input logic gate (multi-part)
version: 4
author: Stephen G. Parry
title: 4071 4 x 2 Input OR Gate, multi-part
label: 2
taxonomy: part.dip.14.pins
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">4071 4 x 2 Input OR Gate with sub-parts</span></p></body></html>

path:
C:/Users/jnoack/AppData/Roaming/Fritzing/partfactory/1416ce2b2368fabea276407ad0fa4d4f/core/4071_4_x_2_input_OR_gate_multipart_subpart3.fzp


moduleID: 4070_4_x_2_input_XOR_gate_multipart_subpart4
family: 40xx 4x2 input logic gate (multi-part)
version: 4
author: Stephen G. Parry
title: 4070 4 x 2 Input XOR Gate, multi-part
label: 3
taxonomy: part.dip.14.pins
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">4070 4 x 2 Input XOR Gate with sub-parts</span></p></body></html>

path:
C:/Users/jnoack/AppData/Roaming/Fritzing/partfactory/1416ce2b2368fabea276407ad0fa4d4f/core/4070_4_x_2_input_XOR_gate_multipart_subpart4.fzp


moduleID: xbeeshield-v13
family: wireless shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino XBee Shield
date: 2011-07-08
path: core/xbeeshield-v13.fzp
description:
<p>


	<span style="font-weight: bold;">Description: </span>This new revision fixes some minor spacing and labeling issues, but functionality remains the same.The XBee Shield simplifies the task of interfacing an XBee with your Arduino. This board mates directly with an <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9219" name="" target="_blank">Arduino Pro</a> or <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9950" target="_self">USB board</a>, and equips it with wireless communication capabilities using the popular XBee module. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. This is SparkFun&#39;s own design and is a distant relative to the official XBee Shield from Arduino.<br />


	<br />


	The serial pins (DIN and DOUT) of the XBee are connected through an SPDT switch, which allows you to select a connection to either the UART pins (D0, D1) or any digital pins on the Arduino (D2 and D3 default). Power is taken from the 5V pin of the Arduino and regulated on-board to 3.3VDC before being supplied to the XBee. The shield also takes care of level shifting on the DIN pin of the XBee.<br />


	<br />


	The board also includes LEDs to indicate power and activity on DIN, DOUT, RSSI, and DIO5 pins of the XBee. The Arduino&#39;s reset button is brought out on the shield, and a 12x11 grid of 0.1&quot; holes are available for prototyping. The shield does not come with headers installed; we recommend the <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9280" name="" target="_self">6</a> and <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9279" name="" target="_self">8-pin stackable headers</a>. The XBee module is also not included.<br />


	<br />


	<span style="font-weight: bold;">Features:</span></p>


<ul>


	<li>


		Mounts directly onto your Arduino</li>


	<li>


		DIN and DOUT pins of XBee can be connected to either the UART pins or any digital pin on the Arduino (D2 and D3 default)</li>


	<li>


		3.3V power regulation and level shifting on-board</li>


	<li>


		12x11 grid of 0.1&quot; spaced prototyping holes</li>


	<li>


		Reset button brought out</li>


	<li>


		Power, DIN, DOUT, RSSI and DIO5 indicator LEDs</li>


</ul>


<p>


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/xbeeshield-v13.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/xbeeshield-v13.zip" target="_blank">Eagle Files</a></li>


</ul>


<p>


	<strong>Replaces:</strong> <a href="http://www.sparkfun.com/products/9841">WRL-09841</a></p>


moduleID: SparkFun-Electromechanical-BUTTON-CONDUCTIVE-SMD-0.1_
family: sparkfun button (conductive)
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: BUTTON-CONDUCTIVE
label: U
date: 2013-02-13
path: core/sparkfun-electromechanical-button-conductive-smd-0.1_.fzp
description:
Used with rubber key pads. This one was designed and proven to work with the PolyCase Key FOB enclosures.


moduleID: Arduino-Pro-Mini-v13-a4+5
family: microcontroller board (arduino)
version: 5
fritzingversion: 0.5.2b.02.18.4756
author: althaus
title: Arduino Pro Mini v13
date: 2013-08-22
path: core/Arduino-Pro-Mini-v13-a4+5.fzp
description:
It's blue! It's thin! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Uno R3. It's a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (5V), lack of connectors, and USB off board.

We really wanted to minimize the cost of an Arduino. In order to accomplish this we used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC.

The latest and greatest version of this board breaks out the ADC6 and ADC7 pins as well as adds footprints for optional I2C pull-up resistors! We also took the opportunity to slap it with the OSHW logo.


moduleID: Trackballer-v12
family: trackball breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Blackberry Trackballer Breakout
date: 2011-07-08
path: core/Trackballer-v12.fzp
description:
<p>


	<b>Description: </b>This is a breakout board for our <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9308" name="" target="">Blackberry Trackball</a>. The four spindles on the trackball have a tiny circular magnet the end; each of these are paired with an SMD hall effect sensor, which are used to measure up, down, left and right movements of the trackball. An SMD momentary switch is placed under the trackball to give you a select switch. The BTN line will be pulled low when the switch is pressed.</p>


<p>


	Also included on the Trackballer are 4 LEDs: red, blue, green and white. These can be powered to light the clear trackball up any color you can imagine.</p>


<p>


	All features are broken out to a 0.1&quot; pitch header. Regulated, 2.5-5.25VDC power must be provided to power the Hall sensors. The trackball is attached with strong CA glue. Board comes as shown, with all components populated.</p>


<p>


	The hall-effect sensors and trackball combo are surprisingly sensitive. A slight roll of the trackball creates multiple high/low transitions on the four axis pins, easily picked up by any microcontroller. A 360&deg; rotation of the trackball, along a single axis, will result in about 9 high/low transitions.</p>


<p>


	<span style="font-weight: bold;">Features:</span></p>


<ul>


	<li>


		Center select button</li>


	<li>


		360&deg; direction</li>


	<li>


		Hall effect sensors measure up/down/left/right movements of trackball</li>


	<li>


		Red, blue, green, white LEDs to light up the trackball</li>


	<li>


		All pins broken out to 0.1&quot; pitch header</li>


</ul>


<p>


	<span style="font-weight: bold;">Dimensions:</span> 1.1x0.85&quot;<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/Trackball-v11.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/Trackballer-v12-Eagle.zip" name="" target="_blank">Eagle Files</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/SPC00019AEB.pdf" name="" target="_blank">Hall sensor datasheet</a></li>


	<li>


		<a classname="" href="http://www.freescale.com/files/wireless_comm/doc/reports_presentations/eet_teardown_bbpearl_jan07.pdf" name="" target="_blank">Blackberry Teardown</a></li>


	<li>


		<a classname="" href="http://www2.electronicproducts.com/Research_In_Motion_-_BlackBerry_Pearl_8100-whatsinside_text-12.aspx" name="" target="_blank">Inside the Blackberry (BOM)</a></li>


</ul>


moduleID: WiFly_Shield-v17
family: wireless shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino WiFly Shield
date: 2011-07-08
path: core/WiFly_Shield-v17.fzp
description:
<p>


	<span style="font-weight: bold;">Description: </span>This new version breaks out the PI09, FORCE WAKE, and the hardware reset lines. It also has a different crystal and uses the RN-131C.</p>


<p>


	The WiFly Shield equips your Arduino the ability to connect to 802.11b/g wireless networks. The featured components of the shield are a Roving Network&#39;s RN-131C wireless module and an SC16IS750 SPI-to-UART chip. The SPI-to-UART bridge is used to allow for faster transmission speed and to free up the Arduino&#39;s UART.<br />


	<br />


	Power is taken from the Vin pin of your Arduino, regulated to 3.3V, and provided to both the RN-131C and the SC16IS750. You&#39;ll communicate with the WiFly Shield over SPI using Arduino digital pins 10-13 (CS, MOSI, MISO, SCLK respectively).<br />


	<br />


	The shield includes the RN-131C, SC16IS750 and their supporting components. The shield also provides a small prototyping area, with 0.1&quot; spaced holes. Headers are not soldered on, we recommend the <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9280" name="" target="_self">6</a> and <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9279" name="" target="_self">8-pin stackable headers</a>.<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/WiFly_Shield-v17.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/WiFly_Shield-v17.zip">Eagle Files</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Wireless/WiFi/rn-131-ds.pdf" target="_blank">Datasheet (RN-131C)</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Wireless/WiFi/WiFlyGSX-um2.pdf" target="_blank">Reference Guide (RN-131C)</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/SMD/SC16IS740_750_760.pdf" target="_blank">SC16IS750 Datasheet</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=158" name="" target="_blank">Talking Wireless Server Tutorial</a></li>


	<li>


		<a href="http://forum.sparkfun.com/viewtopic.php?p=115626#p115626">Experimental WiFly Arduino Library</a></li>


	<li>


		<a href="http://forum.sparkfun.com/viewtopic.php?f=32&amp;t=25129" target="_blank">WiFly Troubleshooting</a></li>


	<li>


		<a href="http://lifeboat.co.nz/the-finished-wireless-water-sensor/" target="_blank">Wireless Water Sensor Project</a></li>


</ul>


<p>


	<strong>Replaces:</strong> <a href="http://www.sparkfun.com/commerce/product_info.php?products_id=9367" target="_blank">WRL-09367</a></p>


moduleID: lhi958
family: sensors
version: 1
fritzingversion: 0.7.2b
author: www.fritzing.org
title: LHi958
label: Lhi
date: 2014-01-13
path: core/Lhi958.fzp
description:
The LHi 954 and LHi 958 pyroelectric infrared-detectors have been a world
standard for more than 10 years. They both are dual element types with FET in
source follower connection. The LHi 954 detector is available in TO-39 housing
with standard infrared filter whereas the LHi 958 is the same detector in a TO-5
housing with standard infrared filter.
It offers a highly stable responsivity with excellent common mode performance
(match) and low noise .


moduleID: SparkFun-Sensors-VCNL4000-
family: sparkfun proximity sensor
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: VCNL4000
label: U
date: 2013-02-13
path: core/sparkfun-sensors-vcnl4000-.fzp
description:
Fully integrated proximity and ambient light sensor with infrared emitter and I2C interface<br>
<br>


moduleID: Joystick_Shield-v14
family: joystick shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino Joystick Shield
date: 2011-07-08
path: core/Joystick_Shield-v14.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> The Joystick Shield sits on top of your Arduino and turns it into a simple controller. Five momentary push buttons (4+ joystick select button) and a two-axis thumb joystick gives your Arduino functionality on the level of old <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=8978" name="" target="_self">Nintendo controllers</a>.</p>


<p>


	<strong>Please note:</strong> This is an older version of the PCB that does not have the prototyping area. The examples and assembly guides still apply. We&#39;re just trying to give these PCBs a happy home before we move on to the next revision.<br />


	<br />


	The momentary push buttons are connected to Arduino digital pins 2-6; when pressed they will pull the pin low (utilizing the internal pull-ups of the Arduino). Vertical movement of the joystick will produce a proportional analog voltage on analog pin 0, likewise, horizontal movement of the joystick can be tracked on analog pin 1.<br />


	<br />


	This product is only the Joystick Shield PCB - you&#39;ll need to purchase the buttons and joystick separately, and assemble the controller yourself. Here&#39;s what you&#39;ll need in addition to the shield:</p>


<ul>


	<li>


		4 x <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9190" name="" target="_self">Momentary Push Button Switch - 12mm Square</a></li>


	<li>


		1 x <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9032" name="" target="_blank">Thumb Joystick</a></li>


	<li>


		1 x <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=97" name="" target="_blank">Mini Push Button Switch</a> (breaks out Arduino&#39;s reset switch)</li>


	<li>


		2 x <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9280" name="" target="_self">6-pin Arduino Stackable Header</a></li>


	<li>


		2 x <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9279" name="" target="_self">8-pin Arduino Stackable Header</a></li>


</ul>


<p>


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=161" target="_blank">Joystick Assembly Tutorial</a></li>


	<li>


		<a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=171" target="_blank">Joystick Quickstart Guide</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/Joystick_Shield-v12.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/Joystick_Shield-v13.zip" name="" target="_blank">Eagle Files</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/Code/Joystick_Shield_Example.zip" name="" target="_blank">Arduino Sample Sketch</a></li>


</ul>


moduleID: 22b3bd892734fe28cfbcd54edd4c2a6a
family: ic
version: 4
fritzingversion: 0.7.0b.02.01.5801
author: jonathan
title: STM32F103
label: U
date: 2011-04-06
path: core/STM32F103.fzp
description:
Medium density Cortex-M3 microcontroller. http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00161566.pdf


moduleID: SparkFun-DiscreteSemi-TRANSISTOR_NPN-SOT23
family: sparkfun transistor npn
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: TRANSISTOR_NPN
label: Q
date: 2013-02-13
path: core/sparkfun-discretesemi-transistor_npn-sot23.fzp
description:
Generic NPN BJT. MMBT2222 is the common NPN we use. Double check against datasheet- not all devices are the same!


moduleID: SparkFun-Connectors-USB-MINIB--5PIN
family: sparkfun usb connector
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Mini-USB _B_ connector with 5th pin broken out.
label: U
date: 2013-02-13
path: core/sparkfun-connectors-usb-minib--5pin.fzp
description:
<b>Mini-USB B connector with 5th pin broken out.</b><p>
Created new symbol breaking out 5th ID pin in mini/micro USB connector spec.  See: http://en.wikipedia.org/wiki/Mini_usb#Cables.  Uses same footprint as 4-pin symbol.<p>
 

Also added pins to connect to mounting / shield pads if required (probably not generally needed as signals aren't shielded once they leave the connector).


moduleID: SparkFun-Connectors-USB_MICROB_PLUG--SMT
family: sparkfun usb plug
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: USB_MICROB_PLUG
label: JP
date: 2013-02-13
path: core/sparkfun-connectors-usb_microb_plug--smt.fzp
description:
<h3>USB Micro-B Plug</h3>
Comes in a variety of packages.  Check out Hirose's ZX-x0 line: http://www.hirose.co.jp/cataloge_hp/e24200011.pdf


moduleID: SparkFun-DigitalIC-INVERTING_SCHMITT_TRIGGER-
family: sparkfun intering schmitt trigger
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: INVERTING_SCHMITT_TRIGGER
label: U
date: 2013-02-13
path: core/sparkfun-digitalic-inverting_schmitt_trigger-.fzp
description:
FAIRCHILD Inverting Schmitt Trigger

UNTESTED FOOTPRINT!!
Used in External Clock Sources.
Digikey P/N NC7SZ14M5XCT-ND


moduleID: SparkFun-LED-LED-10MMfix
family: sparkfun led
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: LEDs
label: LED
date: 2013-02-13
path: core/sparkfun-led-led-10mm_fix.fzp
description:
<b>LEDs</b>
Standard schematic elements and footprints for 5mm, 3mm, 1206, and 0603 sized LEDs. 5mm - Spark Fun Electronics SKU : COM-00529 (and others)


moduleID: LilyPad-Accelerometer-v17
family: microcontroller board (lilypad)
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Fabian Althaus
title: LilyPad Accelerometer ADXL335
date: 2011-05-26
path: core/LilyPad-Accelerometer-v17.fzp
description:
Description: This is a three axis accelerometer for the LilyPad system. Based on the ADXL335 accelerometer from Analog Devices, the LilyPad Accelerometer can detect joint movement as well as inclination and vibration.

The ADXL335 outputs a 0V to 3V analog signal on each of the X, Y, and Z axis. You will need to convert this analog voltage to a gravity amount and use trigonometry to calculate a true 'angle'. If you are not looking for tilt, it is very easy to use this sensor for basic motion sensing.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles.

Dimensions:

20mm outer diameter
Thin 0.8mm PCB


moduleID: SparkFun-RF-VENUS638FLPX-L-
family: sparkfun gps receiver
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Venus638FLPX-L GPS Receiver
label: U
date: 2013-02-13
path: core/sparkfun-rf-venus638flpx-l-.fzp
description:
<b>Venus638FLPX-L GPS Receiver</b><p>

Venus638FLPx is a high performance, low cost, single
chip GPS receiver targeting mobile consumer and cellular
handset applications. It offers very low power
consumption, high sensitivity, and best in class signal
acquisition and time-to-first-fix performance.<p>
Venus638FLPx contains all the necessary components of
a complete GPS receiver, includes 1.2dB cascaded
system NF RF front-end, GPS baseband signal processor,
0.5ppm TCXO, 32.768kHz RTC crystal, RTC LDO
regulator, and passive components. It requires very low
external component count and takes up only 100mm2
PCB footprint.<p>
Dedicated massive-correlator signal parameter search
engine within the baseband enables rapid search of all the
available satellites and acquisition of very weak signal. An
advanced track engine allows weak signal tracking and
positioning in harsh environments such as urban canyons
and under deep foliage. The self-contained architecture keeps GPS processing off
the host and allows integration into applications with very
little resource.<p>
FEATURES<p>
<ul>
<li>20Hz update rate</li>
<li>-148dBm cold start sensitivity</li>
<li>-165dBm tracking sensitivity</li>
<li>29 second cold start TTFF</li>
<li>3.5 second TTFF with AGPS</li>
<li>1 second hot start</li>
<li>2.5m accuracy</li>
<li>Multipath detection and suppression</li>
<li>Jamming detection and mitigation</li>
<li>SBAS (WAAS / EGNOS) support</li>
<li>7-day extended ephemeris AGPS</li>
<li>67mW full power navigation</li>
<li>Works directly with active or passive antenna</li>
<li>Internal flash for optional 75K point data logging</li>
<li>Supports external SPI flash memory data logging</li>
<li>Complete receiver in 10mm x 10mm x 1.3mm size</li>
<li>Contains LNA, SAW Filter, TCXO, RTC Xtal, LDO</li>
<li>Pb-free RoHS compliant</li>
</ul>


moduleID: RN41-v14
family: wireless
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Bluetooth Module Breakout - Roving Networks (RN-41)
date: 2011-11-29
path: core/RN41-v14.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> This is a simple breakout for the Roving Networks Bluetooth<sup><font face="Tahoma, sans-serif"><b> </b></font></sup>module. All pertinent pins are broken out and labeled. This new version&#39;s headers are unpopulated. Check below for appropriate headers.<br />


	<br />


	The module from Roving Networks is powerful, small, and very easy to use. This Bluetooth module is designed to replace serial cables. The Bluetooth<sup><font face="Tahoma, sans-serif"><b> </b></font></sup>stack is completely encapsulated. The end user just sees serial characters being transmitted back and forth. Press the &#39;A&#39; character from a terminal program on your computer and an &#39;A&#39; will be pushed out the TX pin of the Bluetooth<sup><font face="Tahoma, sans-serif"><b> </b></font></sup>module.</p>


<p>


	<span style="font-weight: bold;">Do not</span> attach this device directly to a serial port. You will need an <a href="http://www.sparkfun.com/products/718" target="_blank">RS232 to TTL converter circuit</a> if you need to attach this device to a computer.</p>


<p>


	<span style="font-weight: bold;">Features:</span></p>


<ul>


	<li>


		Fully qualified Bluetooth module</li>


	<li>


		FCC Certified</li>


	<li>


		Fully configurable UART</li>


	<li>


		UART Data rates up to 3Mbps</li>


	<li>


		Over air data rate of 721kbps to 2.0Mbps</li>


	<li>


		Low power sleep mode</li>


	<li>


		Compatible with all Bluetooth<sup><font face="Tahoma, sans-serif"><b> </b></font></sup>products that support SPP (almost all do)</li>


	<li>


		Includes support for BCSP, DUN, LAN, GAP SDP, RFCOMM, and L2CAP protocols</li>


	<li>


		3.3V operation</li>


	<li>


		Status pin</li>


	<li>


		Bluetooth Technology v2.0 compatible</li>


	<li>


		Class 1 power output</li>


</ul>


<p>


	<span style="font-weight: bold;">Dimensions:</span> 1.0x0.9&quot;</p>


<p>


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Wireless/Bluetooth/RN41-v14.pdf">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Wireless/Bluetooth/RN41-v14.zip">Eagle Files</a></li>


	<li>


		<a href="http://www.rovingnetworks.com/documents/RN-41.pdf" target="_blank">RN-41 Datasheet</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Wireless/Bluetooth/rn-bluetooth-um.pdf" name="" target="_blank">RN-41 AT Command Set</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Wireless/Bluetooth/pic-example-1-1.pdf" name="" target="_blank">PIC Example</a></li>


	<li>


		<a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=65" name="" target="_blank">Tutorial</a> (interfacing a 3.3V device to a 5V micro)</li>


</ul>


<p>


	<strong>Replaces:</strong> <a href="http://www.sparkfun.com/products/10144" target="_blank">WRL-10144</a></p>


moduleID: ad5330 breakout-v11
family: sparkfun
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: DAC Breakout
date: 2011-07-08
path: core/ad5330 breakout-v11.fzp
description:
<p>


	<span style="font-weight: bold;">Description: </span>This is a simple breakout board for Analog Device&#39;s AD5330 8-bit digital-to-analog converter (DAC). The AD5330 has a parallel interface, and can operate from a 2.5 to 5.5V supply consuming just 115uA (at 3V).<br />


	<br />


	The DB0-7 pins, the parallel data inputs, are used to configure the analog output voltage. CS selects the device, and data is loaded into the input registers on the rising edge of WR. The GAIN pin allows the output range to be set at either 0V to VCC or 0V to 2VCC.<br />


	<br />


	Input data to the AD5330 is double-buffered, allowing simultaneous update of multiple DACs in a system using the LDAC pin. An asynchronous CLR input resets the contents of the input register and the DAC register to all zeros. The AD5330 also incorporates a power-on reset circuit that ensures that the DAC output powers on to 0V and remains there until valid data is written to the device.<br />


	<br />


	This breadboard friendly board breaks out every necessary pin of the AD5330 to 0.1&quot; spaced headers. The board includes a decoupling capacitor, but does not do any voltage regulation; voltage supplied to the board should be within the specified range.<br />


	<br />


	<span style="font-weight: bold;">Dimensions: </span>0.80 x 1.10&quot;<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/BreakoutBoards/ad5330%20breakout-v11.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.analog.com/static/imported-files/data_sheets/AD5330_5331_5340_5341.pdf" name="" target="_blank">AD5330 Datasheet</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/tutorial/AD5330_Play_Wavs/AD5330%20Arduino%20Library.zip" name="" target="_blank">Arduino Library</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=160" name="" target="_blank">Tutorial</a></li>


</ul>


moduleID: Arduino_Esplora
family: microcontroller board (arduino)
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: althaus
title: Arduino Esplora (Rev4)
path: core/Arduino_Esplora.fzp
description:
The Arduino Esplora is a microcontroller board derived from the Arduino Leonardo. The Esplora differs from all preceding Arduino boards in that it provides a number of built-in, ready-to-use setof onboard sensors for interaction. It's designed for people who want to get up and running with Arduino without having to learn about the electronics first. For a step-by-step introduction to the Esplora, check out the Getting Started with Esplora guide.



The Esplora has onboard sound and light outputs, and several input sensors, including a joystick, a slider, a temperature sensor, an accelerometer, a microphone, and a light sensor. It also has the potential to expand its capabilities with two Tinkerkit input and output connectors, and a socket for a color TFT LCD screen.



Like the Leonardo board, the Esplora uses an Atmega32U4 AVR microcontroller with 16 MHz crystal oscillator and a micro USB connection capable of acting as a USB client device, like a mouse or a keyboard.



In the upper left corner of the board there is a reset pushbutton, that you can use to restart the board. There are four status LEDS :



    ON [green] indicates whether the board is receiving power supply

    L [yellow] connected directly to the microcontroller, accessible through pin 13

    RX and TX [yellow] indicates the data being transmitted or received over the USB communication 



The board contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable to get started.



The Esplora has built-in USB communication; it can appear to a connected computer as a mouse or keyboard, in addition to a virtual (CDC) serial / COM port. This has other implications for the behavior of the board; these are detailed on the getting started page. 


moduleID: SEN-10621 RPI-1031 Tilt-a-Whirl Breakout-sfe_c4f3fbd3a94f0953d33d8ac83b51e5ac_3
family: //obsolete//sparkfun breakout boards
version: 4
replacedby: Sparkfun_TiltaWhirl
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun and Fritzing toolkit
title: SparkFun RPI-1031 Tilt-a-Whirl Breakout
label: SparkFun RPI-1031 Tilt-a-Whirl Breakout
path: obsolete/SEN-10621 RPI-1031 Tilt-a-Whirl Breakout-sfe_c4f3fbd3a94f0953d33d8ac83b51e5ac_3.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Arial,MS Sans Serif,Geneva,sans-serif'; font-size:14px; color:#333333; background-color:#ffffff;">The RPI-1031 tilt sensor is capable of sensing a change in orientation in four different directions: forward, back, left or right. This breakout board makes it easier to incorporate the RPI-1031 in your next project by breaking the necessary pins out to standard 0.1&quot; spaced headers. This board will work at either 3.3 or 5V.</span></p></body></html>


moduleID: hc-sr04_ultrafix_b8f5923dd02482d2c2bcc2b7aec1cdd8_13
family: distance sensor
version: 4
author: Richard Bruneau
title: HC-SR04 Ultrasonic Distance Sensor
label: HC-SR04 Sensor
taxonomy: part.dip.8.pins
path: core/HC-SR04 Ultrasonic Distance Sensor.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The HC-SR04 is an ultrasonic distance sensor. It is capable of providing measurement for ranges of 2cm to 400cm. The module operates at 5V.</p></body></html>


moduleID: AnalogDevices_SSM2212RZ_subpart3
family: adi-transistor
version: 4
fritzingversion: 0.7.12b.02.13.6882
author: Analog Devices
title: SSM2212 - Audio Dual Matched NPN Transistor
label: 3
spice:
X{instanceTitle} {net connector1} {net connector2} {net connector3} {net connector6} {net connector7} {net connector8} SSM2212

path:
C:/Users/jnoack/AppData/Roaming/Fritzing/partfactory/1416ce2b2368fabea276407ad0fa4d4f/core/AnalogDevices_SSM2212RZ_subpart3.fzp


moduleID: SparkFun-Sensors-PHOTOCELL-PTH
family: sparkfun photoresistor
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: PHOTOCELL
label: R
date: 2013-02-13
path: core/sparkfun-sensors-photocell-pth.fzp
description:
CdS photoresistor. This is a low cost way to detect light levels. Resistance decreases with more incoming light. SparkFun SKU: SEN-09088


moduleID: jlpcb-128
family: microcontroller board (jeelabs)
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Jean-Claude Wippler
title: JeeNode wireless microcontroller
date: 2011-12-04
path: core/jlpcb-128.fzp
description:
The JeeNode is a low-cost combination of radio and microcontroller board. Think of the JeeNode as an Arduino + Xbee shield + Xbee, but smaller and less feature-full than the XBee. This is the through-hole kit, but the headers are pin-compatible with the JeeNode SMD, the JeeNode SMD, and the SMD Kit.


moduleID: SparkFun-Sensors-SHT1X-SMD
family: sparkfun humidity sensor
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: SHT1x Humdity Sensor
label: U
date: 2013-02-13
path: core/sparkfun-sensors-sht1x-smd.fzp
description:
<b>SHT1x Humdity Sensor</b>
Sensirion humdity sensor. Schematic element and footprint proven. Spark Fun Electronics SKU : COM-08227


moduleID: ludusProtoShield
family: sparkfun shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: f.althaus
title: Ludus ProtoShield
date: 2015-10-31
path: core/ludusProtoShield.fzp
description:
SparkFun Ludus Protoshield

Description: The SparkFun Ludus Protoshield is an Arduino compatible shield designed to make connecting motors and sensors to your Arduino-based development board as fast and easy as possible. Each Ludus shield has been equipped with a small prototyping area for quick integration of Arduino projects without the need of a separate breadboard. Simply assemble what you need in the prototyping area, attach this shield to your Arduino, and you will be up and running in no time. The SparkFun Ludus Protoshield was developed by our Education department to help teach any interested individual the dynamics of motor control through the Arduino IDE and was lovingly named after their very own mascot.



The heart of the Ludus ProtoShield is an H-Bridge Motor Driver. This allows the ProtoShield to drive two DC motors at once in both directions and brake electronically. The TB6612FNG H-Bridge Driver is rated up to 1.2A per channel at 13V which means it will drive a fair variety of hobby motors ranging in power. This Ludus board also features PWR and GND rails alongside the GPIO pins. Not only does this help you to avoid the common inconvenience of running out of GND and PWR pins, but because the pins are arranged with PWR in the center, plugging in servos is a snap! The PWR rail can even be switched between 5V (from the Arduino’s voltage regulator) and Vin using the on board slide switches. These features make the SparkFun Ludus Protoshield ideal for small rover-style robots.



This specific Ludus Protoshield includes an I2C header that has been laid out so that you can plug in a device such as a magnetometer or a 9DOF sensor. With these sensors it’s possible to set up a a nice a reliable navigation system.


moduleID: 1e03b5a5-ed62-11dd-b332-001a4d5c439f
family: //obsolete//mystery part
version: 1
replacedby: mystery_part_7
author: Fritzing Part-o-matic
title: Mystery Part - 7 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.7pins
path: obsolete/mystery_part7.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 7 pins on a 100 mil inline pin header footprint.


moduleID: SparkFun_BME280_Breakout
family: sparkfun breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: f.althaus
title: BME280 Breakout
date: 2015-10-04
path: core/SparkFun_BME280_Breakout.fzp
description:
SparkFun Atmospheric Sensor Breakout - BME280
SEN-13676 
The SparkFun BME280 Atmospheric Sensor Breakout is the easy way to measure barometric pressure, humidity, and temperature readings all without taking up too much space. Basically, anything you need to know about atmospheric conditions you can find out from this tiny breakout. The BME280 Breakout has been design to be used in indoor/outdoor navigation, weather forecasting, home automation, and even personal health and wellness monitoring.

The on-board BME280 sensor measures atmospheric pressure from 30kPa to 110kPa as well as relative humidity and temperature. The breakout provides a 3.3V SPI interface, a 5V tolerant I2C interface (with pull-up resistors to 3.3V), takes measurements at less than 1mA and idles less than 5µA. The BME280 Breakout board has 10 pins, but no more than six are used at a single time. The left side of the board provide power, ground, and I2C pins. The remaining pins which provide SPI functionality and have another power and ground, are broken out on the other side.


moduleID: CD4048B_64153d6304720c78495cf70ab817988e_1
family: logic ic
version: 4
author: Christoph Rieder
title: CD4048B
label: CD4048B
taxonomy: part.dip.16.pins
path: core/CD4048B_1.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">CMOS Multifunction Expandable 8-Input Gate</p></body></html>


moduleID: LilyPad Vibe Motor
family: microcontroller board (lilypad)
fritzingversion: 0.4.3b.09.26.4458
author: J.A. Korten - JKSOFT Educational
title: Lilypad Vibe Motor
label: Lilypad Vibe
date: 2010-11-18
path: core/Lilypad Vibe Motor.fzp
description:
Description: Apply 5V and be shaken by this small, but powerful vibration motor. Works great as an physical indicator without notifying anyone but the wearer. (See: http://www.sparkfun.com/products/8468)


moduleID: SparkFun-Connectors-EM408_CON-
family: sparkfun gps receiver
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: EM408_CON
label: U
date: 2013-02-13
path: core/sparkfun-connectors-em408_con-.fzp
description:
This is the mating connector for the EM408 GPS receiver.  The EM408 connects to the board via a cable, 
this connector footprint does not include the outline of the receiver.

You should include the EM408_Outline device in your schematic if you are to use the EM408 in your design.


moduleID: Color-LCD-Shield-v14
family: display shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino Color LCD Shield
date: 2011-07-08
path: core/Color-LCD-Shield-v14.fzp
description:
<p>


	<span style="font-weight: bold;">Description: </span>The Color LCD Shield, recommended by and designed in partnership with an SFE customer, provides an easy method of connecting the popular <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=569" name="" target="_self">Nokia 6100 LCD</a> to your <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=666" name="" target="_self">Arduino USB</a> or <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9219" name="" target="_self">Pro</a>. The board comes as shown with the 128x128 mini color LCD, as well as a backlight driver circuit (boosts to 7V), and three momentary push-buttons (tied through a jumper to pins D3-5).<br />


	<br />


	The Nokia 6100 LCD is controlled through a 9-bit SPI interface. The control pins of the LCD are connected to the hardware SPI pins of the Arduino (D13 -SCK, D11 - DIO), the CS pin is tied to D9 and the reset pin is connected to D8. Voltage from the &#39;5V&#39; pin of the Arduino is boosted to 7V to power the LCD backlight.<br />


	<br />


	The Nokia 6100 LCD is included with the Color LCD Shield. Headers are not soldered on, we recommend the <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9280" name="" target="_self">6</a> and <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9279" name="" target="_self">8-pin stackable headers</a>.<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/Color-LCD-Shield-v12.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/Color-LCD-Shield-Example.zip" name="" target="_blank">Example Code</a></li>


	<li>


		<a href="http://peterdavenport.blogspot.com/p/lcd-library.html" target="_blank">Example Arduino Library</a> (Thanks Peter!)</li>


	<li>


		<a href="http://www.cbxdragbike.com/arduino/sparkfunlcd/index.html" target="_blank">Example Arduino Code</a> (Thanks Mark!)</li>


</ul>


moduleID: SparkFun-DigitalIC-A6282--LP
family: sparkfun led driver
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: A6282
label: U
date: 2013-02-13
path: core/sparkfun-digitalic-a6282--lp.fzp
description:
16-Channel Constant-Current LED Driver<br>
Packages: TSSOP-24, 24-pin QFN<br>
<br>
Last modified: 8/20/10<br>
<B>Unproven!</b><br>


moduleID: 5DOF-v25
family: imu
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: IMU Analog Combo Board - 5 Degrees of Freedom
date: 2011-07-08
path: core/5DOF-v25.fzp
description:
<p>


	<b>Description:</b> This Inertia Measurement Unit Combo Board incorporates the IDG500 dual-axis gyroscope and Analog Devices triple axis ADXL335 accelerometer in a tight footprint. The IMU board uses a standard 0.1&quot; footprint and includes all outputs from both the IDG500 gyro and ADXL335 accelerometer ICs.</p>


<p>


	This IMU 5DOF is the latest in a long line of development boards. This latest version allows an unheard of 5 axis of sensing (Roll, Pitch, X, Y, Z) in less than 1 square inch, and under 2 grams!</p>


<p>


	By combining the IDG500 and ADXL335 sensors, the IMU board enables students and hobbyists to easily incorporate roll, pitch, and tilt measurements into their projects or robots.</p>


<p>


	Board comes fully assembled and tested. Units come as shown without headers installed. We recommend right-angle break away headers, straight pin headers, or wire up your own cable!</p>


<p>


	Having a hard time picking an IMU? Our <a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=167" target="_self">Accelerometer, Gyro, and IMU Buying Guide</a> might help!</p>


<p>


	<b>Dimensions:</b> 0.75x0.9&quot; (20x23mm)</p>


<p>


	<b>Weight:</b> 2g</p>


<p>


	<b>Documents:</b></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Sensors/IMU/5DOF-v25.pdf" name="" target="_blank">IMU 5DOF Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/SMD/adxl335.pdf" name="" target="_blank">ADXL335 Datasheet</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/SMD/Datasheet_IDG500.pdf" name="" target="_blank">IDG500 Datasheet</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Sensors/IMU-5DOF-Dimensional.pdf" target="_blank">IMU 5DOF Dimensional Drawing</a></li>


</ul>


<p>


	Resources and Applications (Inverted / reverse pendulum robots, Unmanned Aerial Vehicles, etc.):</p>


<ul>


	<li>


		<a classname="" href="http://sites.google.com/site/pic24micro/Home/projects/vibration-compenstated-tilt-sensor" name="" target="_blank">Great stabilization project using mini-Bully PIC</a></li>


	<li>


		<a href="http://www.dprg.org/projects/2003-01a/" target="_blank">Reverse Pendulum Robot Project</a></li>


	<li>


		<a href="http://sourceforge.net/mailarchive/forum.php?forum_id=296&amp;max_rows=25&amp;style=nested&amp;viewmonth=200309" target="_blank"> The ADXRS vs. the Tokin CG-16D</a></li>


	<li>


		<a href="http://autopilot.sourceforge.net/rev2.2.html" target="_blank"> Helicopter Autopilot</a></li>


	<li>


		<a href="http://www.joustinghill.org/matt/robots/firemarshalbill/" target="_blank"> Fire Marshall Bill Robot</a></li>


	<li>


		<a href="http://wiring.org.co/learning/basics/gyroidg500.html" target="_blank">Wiring Example</a> (IDG500)</li>


</ul>


moduleID: SparkFun-Connectors-M11-SMD_NO_HOLES
family: sparkfun pin header
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Header 11
label: JP
date: 2013-02-13
path: core/sparkfun-connectors-m11-smd_no_holes.fzp
description:
<b>Header 11</b>
Standard 11-pin 0.1 header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115).


moduleID: TEMT6000_Breakout-v12
family: light sensor breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Ambient Light Sensor (TEMT6000 Breakout Board)
date: 2011-07-08
path: core/TEMT6000_Breakout-v12.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> Basic breakout board for the TEMT6000 Ambient Light Sensor. Only what you need, nothing you don&#39;t. Sensor acts like a transistor - the greater the incoming light, the higher the analog voltage on the signal pin.<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Imaging/TEMT6000.pdf" name="" target="_blank">Datasheet</a></li>


	<li>


		<a classname="" href="http://wiring.org.co/learning/basics/ambientlighttemt6000.html" name="" target="_blank">Wiring Example</a></li>


</ul>


moduleID: SparkFun-Electromechanical-AYZ0202-
family: sparkfun slide switch
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: SPDT Slide Switch
label: U
date: 2013-02-13
path: core/sparkfun-electromechanical-ayz0202-.fzp
description:
<b>SPDT Slide Switch</b>
Simple SMD single-pull double-throw slide switch. Good for  less than 350mA power switch, switching UARTs between devices, etc. Spark Fun Electronics SKU : COM-00597


moduleID: PHOTON_fix
family: microcontroller board (arduino compatible)
version: 2
fritzingversion: 0.9.2b
author: Brett Walach,Fabian Althaus
title: Photon
path: core/PHOTON_fix.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">The Photon is a tiny Wi-Fi development board that makes it easy to create internet-connected hardware. The Photon is all you need to get started. Power it over USB and in minutes you'll be controlling LEDs, switches, and motors and collecting data from sensors over the internet!</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">It has 18 digital I/O pins, 8 analog input pins, 2 analog outputs (DAC), 9 PWM pins; UART (Serial), SPI, I2S, I2C, CAN, and JTAG peripherals available. Programmed wirelessly OTA (Over The Air via Particle Cloud), via USB or JTAG. 3.3VDC supply voltage (on board power regulator); can be powered by USB Micro, VIN or 3V3 with 100mA typical current consumption; 300mA peak consumption (during transmit events). Powered by a 32-bit STM32F205 microcontroller, ARM Cortex-M3 architecture, running at 120Mhz, with 1MB of Flash and 128KB of RAM.</span></p></body></html>


moduleID: SparkFun Load Sensor Combinator
family: sparkfun breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: joev.noise
title: SparkFun Load Sensor Combinator
date: 2015-10-31
path: core/SparkFun Load Sensor Combinator.fzp
description:
SparkFun Load Sensor Combinator

The SparkFun Load Sensor Combinator is a bare PCB that combines four load sensors into a standard 4-wire wheatstone configuration. If you open up an electronic bathroom scale you’ll find a large rats nest of wires. The Load Sensor Combinator was created to combine the 12 wires found in a bathroom scale into the standard 4-wire wheatstone bridge configuration.



You can either use four individual load sensors or simply purchase an off-the-shelf bathroom scale and hacking the combinator into it rather than trying to design a base to properly mount four load sensors.



This board works great with our Load Cell Amplifier breakout board; the five pins on the edge of the combinator line up directly to the five pins on the amplifier.



If your amplifier and supporting electronics are more than a few inches away from the scale an RJ45 footprint is provided. The four wheatstone pins (E+/E-/S+/S-) as well as the shield pin are connected to twisted pairs within a standard cheap Ethernet cable. This allows the amplifier board to be placed many feet away from the scale itself.



The combinator board also includes a footprint for the DS18B20 one wire temperature sensor. This allows the user to gather the temperature of the scale in case there is a large variance between the scale and the amplifier. These three pins are accessed through the RJ45 connection as well allowing remote temperature readings to be gathered over one twisted pair Ethernet cable.


moduleID: LilyPad-Simple-v22
family: //obsolete//microcontroller board (lilypad)
version: 4
replacedby: LilyPad-Simple-v25
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: LilyPad Arduino Simple Board
date: 2011-07-08
path: obsolete/LilyPad-Simple-v22.fzp
description:
<p>


	<strong>Description:</strong> This is the LilyPad Arduino Simple Board. It&#39;s controlled by an ATmega328 with the Arduino bootloader. It has fewer pins than the <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9266" name="" target="">LilyPad Arduino Main Board</a>, a built in power supply socket, and an on/off switch. Any of our LiPo batteries can be plugged right into the socket. The Simple board is designed to streamline your next sewable project by keeping things simple and giving you more room to work&nbsp; and eliminating the need to sew a power supply. This revision does away with the ISP header and adds a charging circuit based on the MCP73831 IC.<br />


	<br />


	LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They&#39;re even washable!<br />


	<br />


	Can&#39;t decide which Arduino is right for you? <a classname="" href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=148" name="" target="">Arduino buying guide</a>!<br />


	<br />


	<strong>Dimensions:</strong></p>


<ul>


	<li>


		50mm outer diameter</li>


	<li>


		Thin 0.8mm PCB</li>


</ul>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/LilyPad/LilyPad-Simple-v22.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/LilyPad/LilyPad-Simple-v22.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Prototyping/Batteries/MCP73831T.pdf" target="_blank">Datasheet</a> (MCP73831T)</li>


	<li>


		<a classname="" href="http://web.media.mit.edu/%7Eleah/LilyPad/" name="" target="_blank">Leah Buechley&#39;s LilyPad Tutorial</a></li>


	<li>


		<a href="http://www.arduino.cc/en/Main/ArduinoBoardLilyPad" target="_blank">LilyPad Arduino Documentation</a></li>


</ul>


<p>


	<strong>Replaces: </strong><a 9725="" href="http://&lt;a href=" http:="" products="" www.sparkfun.com="">DEV-09725</a></p>


moduleID: SparkFun-RF-COPERNICUS-SMD
family: sparkfun gps
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: COPERNICUS
label: IC
date: 2013-02-13
path: core/sparkfun-rf-copernicus-smd.fzp
description:
Copernicus II GPS-  Trimble recommended layout and paste layer. Footprint production proven. Spark Fun Electronics SKU : GPS-07951


moduleID: SparkFun-PowerIC-MAX98306-ETD+
family: sparkfun audio amplifier
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Stereo 3.7W Class D Amplifier
label: U
date: 2013-02-13
path: core/sparkfun-poweric-max98306-etd_.fzp
description:
<b>Stereo 3.7W Class D Amplifier</b><p>

Datasheet: <a href=http://datasheets.maxim-ic.com/en/ds/MAX98306.pdf>http://datasheets.maxim-ic.com/en/ds/MAX98306.pdf</a><p>

The MAX98306 stereo 3.7W Class D amplifier provides
Class AB audio performance with Class D efficiency.
This device offers five selectable gain settings (6dB,
9dB, 12dB, 15dB, and 18dB) set by a single gain-select
input (GAIN).
Active emissions limiting, edge-rate, and overshoot control
circuitry combined with a filterless spread-spectrum
modulation scheme (SSM) provide excellent EMI performance
while eliminating the need for output filtering found
in traditional Class D devices. These features reduce
application component count.
The IC's 2.0mA quiescent current with a 3.7V supply
extends battery life in portable applications.
The IC is available in a 14-pin TDFN (3mm x 3mm x
0.75mm) package specified over the extended -40NC to
+85NC temperature range.


moduleID: mega_pro-v13
family: sparkfun microcontroller
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: f.althaus
title: Arduino Mega Pro 3.3V
date: 2015-10-31
path: core/mega_pro-v13.fzp
description:
Mega Pro 3.3V

It’s powerful, it’s portable, it’s Pro! We’re continuing our Pro series of Arduino-compatible micro-controllers with the addition of the Mega Pro. This is a 3.3V microcontroller running a version of the stk500v2 bootloader at 8MHz. Just like the other Pro-series boards this board is built with all SMD components and comes with no headers populated in order to minimize the cost and the board profile. Of course this board has the same pin-configuration as the Arduino Mega so it is dimensionally shield compatible (but do keep in mind that this is a 3.3V board unlike the Arduino Mega).



The Pro series is meant for users that understand the limitations of system voltage (3.3V), lack of connectors, and USB off board. This board connects directly to the FTDI Basic Breakout board and supports auto-reset and the DC power jack footprint is available, but not populated.



Note: If you are using Arduino, modifications were made to the bootloader to support the 3.3V system, you will need to download and install a new board definition so that the Mega Pro can be programmed in the Arduino environment. The .zip archive below contains all of the files that you’ll need including a “readme” file with simple instructions for how to install them. OR you can use Wiring and not worry about this since the board is officially supported. You will need to download the board definition files here.


moduleID: SparkFun-Sensors-SCP1000_D01-SMD2
family: sparkfun barometric pressure sensor
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: SCP1000_D01
label: U
date: 2013-02-13
path: core/sparkfun-sensors-scp1000_d01-smd2.fzp
description:
Barometric pressure sensor. Schematic elements and footprint production proven. Spark Fun Electronics SKU : COM-08128


moduleID: SparkFun-Sensors-IDG300-SMD
family: sparkfun gyroscope
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: IDG300
label: U
date: 2013-02-13
path: core/sparkfun-sensors-idg300-smd.fzp
description:
Invensense 300deg/s dual axis gyro. Works very well. Schematic and footprint are not yet production proven. Spark Fun Electronics SKU : COM-00700


moduleID: xbee_pro_rf_module_47f5ea101911229f01cccb5b78c24973_20
family: digi xbee
version: 4
author: KingDarBoja
title: XBee Pro RF module
taxonomy: part.dip.8.pins
path: core/xbee_pro_rf_module.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The XBee and XBee-PRO RF Modules were engineered to meet IEEE 802.15.4 standards and support the unique needs of low-cost, low-power wireless sensor networks. The modules require minimal power and provide reliable delivery of data between devices. The modules operate within the ISM 2.4 GHz frequency band and are pin-for-pin compatible with each other.</p></body></html>


moduleID: Gas_Sensor_Breakout-v12
family: gas breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Gas Sensor Breakout Board
date: 2011-07-08
path: core/Gas_Sensor_Breakout-v12.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> Simple breakout board for the MQ - 3, MQ - 4, MQ - 6 and MQ - 7 gas sensors.&nbsp; All you need is VCC at 5V, GND, and a resistor to an ADC, that is it.<br />


	<br />


	<span style="font-weight: bold;">Note: </span>This is the PCB only. Sensors listed below.<br style="font-weight: bold;" />


	<br />


	<span style="font-weight: bold;">Dimensions:</span> 16.8mm diameter<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/BreakoutBoards/Gas_Sensor_Breakout-v11.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a href="http://wiring.org.co/learning/basics/airqualitymq135.html" target="_blank">Wiring Example</a></li>


</ul>


<p>


	<br />


	&nbsp;</p>


moduleID: Bean_revE
family: microcontroller bean
version: 4
fritzingversion: 0.9.0b.02.18.4756
author: fabian althaus
title: LightBlue Bean
date: 2014-09-16
path: core/Bean_revE.fzp
description:
The Bean connects your physical devices to the digital world. This is Punch Through Design’s newest addition to the Internet of Things.



We’ve bundled  a microcontroller with our very own Bluetooth Low Energy module to give you a tiny little board that you can program wirelessly from your smartphone or desktop. It runs on a coin cell battery for extended periods of time while in sleep mode —ideal for use as a long-term sensor or data logger. We’ve even built an RGB LED and an accelerometer right into the board!



Zero wires. Infinite uses. What will you build next?


moduleID: 96boards_CE_fixed
family: cpu board (96boards)
version: 2
fritzingversion: 0.9.0b.04.10.5970
author: Ricardo Salveti fixed by f.althaus
title: 96boards Consumer Edition
label: 96boards CE
path: core/96boards_CE.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">96boards is the first open specification to define a platform for the delivery of compatible low-cost, small footprint 32-bit and 64-bit Cortex-A boards from the range of ARM SoC vendors. Standardized expansion buses for peripheral I/O, display and cameras allow the hardware ecosystem to develop a range of compatible add-on products that will work on any 96Boards product over the lifetime of the platform.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">This part includes the low expansion headers for the Consumer Edition specification.</p></body></html>


moduleID: SparkFun-Connectors-M05X2-RAF
family: sparkfun pin header
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Header 5x2
label: JP
date: 2013-02-13
path: core/sparkfun-connectors-m05x2-raf.fzp
description:
<b>Header 5x2</b>
Standard 10-pin dual row 0.1 header. Commonly used with AVR-ISP. Use with Spark Fun Electronics SKU: PRT-00778


moduleID: ArduinoBluetoothMatev13
family: wireless
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Bluetooth Mate Silver
date: 2011-07-08
path: core/ArduinoBluetoothMatev13.fzp
description:
<p>


	<b>Description: </b>The Bluetooth Mate is very similar to our BlueSMiRF modem, but it is designed specifically to be used with our <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9219" name="" target="_self">Arduino Pros</a> and <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9266" name="" target="_self">LilyPad Arduinos</a>. These modems work as a serial (RX/TX) pipe, and are a great wireless replacement for serial cables. Any serial stream from 9600 to 115200bps can be passed seamlessly from your computer to your target.</p>


<p>


	Bluetooth Mate has the same pin out as the FTDI Basic, and is meant to plug directly into an Arduino Pro, Pro Mini, or LilyPad Mainboard. Because we&#39;ve arranged the pins to do this, you cannot directly plug the Bluetooth Mate to an FTDI Basic board (you&#39;ll have to swap TX and RX).</p>


<p>


	The RN-42 is perfect for short range, battery powered applications.&nbsp; The RN-42 uses only 26uA in sleep mode while still being discoverable and connectable.&nbsp; Multiple user configurable power modes allow the user to dial in the lowest power profile for a given application. If you need longer range, check out the Bluetooth Mate Gold.</p>


<p>


	The Bluetooth Mate has on-board voltage regulators, so it can be powered from any 3.3 to 6VDC power supply. We&#39;ve got level shifting all set up so the RX and TX pins on the remote unit are 3-6VDC tolerant. <span style="font-weight: bold;">Do not</span> attach this device directly to a serial port. You will need an <a href="http://www.sparkfun.com/products/449" target="_blank">RS232 to TTL converter circuit</a> if you need to attach this to a computer.</p>


<p>


	Unit comes without a connector; if you want to connect it to an Arduino Pro, we&#39;d suggest the <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9429" name="" target="_self">6-pin right-angle female header</a>.</p>


<p>


	<strong>Note: </strong>The hardware reset pin of the RN-42 module is broken out on the bottom side of the board. This pin is mislabeled as &#39;PIO6&#39;, it is actually PIO4. Should you need to reset the Mate, pull this pin high upon power-up, and then toggle it 3 times.</p>


<p>


	<span style="font-weight: bold;">Features</span><b>:</b></p>


<ul>


	<li>


		Designed to work directly with Arduino Pro&#39;s and LilyPad main boards</li>


	<li>


		FCC Approved Class 2 Bluetooth<sup><font face="Tahoma, sans-serif"><b>&reg; </b></font></sup>Radio Modem!</li>


	<li>


		Low power consumption : 25mA avg</li>


	<li>


		Hardy frequency hopping scheme - operates in harsh RF environments like WiFi, 802.11g, and Zigbee</li>


	<li>


		Encrypted connection</li>


	<li>


		Frequency: 2.4~2.524 GHz</li>


	<li>


		Operating Voltage: 3.3V-6V</li>


	<li>


		Serial communications: 2400-115200bps</li>


	<li>


		Operating Temperature: -40 ~ +70C</li>


	<li>


		Built-in antenna</li>


</ul>


<p>


	<span style="font-weight: bold;">Dimensions: </span></p>


<ul>


	<li>


		Board: 1.75x0.65&quot;<br />


		<span style="font-weight: bold;"> </span></li>


</ul>


<p>


	<b>Documents:</b> <a href="http://www.sparkfun.com/datasheets/RF/BlueSMiRF_v1.pdf" target="_blank"><br />


	</a></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Wireless/Bluetooth/ArduinoBluetoothMatev13.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Wireless/Bluetooth/ArduinoBluetoothMatev13.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Wireless/Bluetooth/rn-bluetooth-um.pdf" name="" target="_blank">RN-42 AT Command Set</a><a href="http://www.sparkfun.com/datasheets/RF/RN_BlueportII-ref-guide.pdf" id="Roving Networks Bluetooth Command Set" name="Roving Networks Bluetooth Command Set" target="_blank"></a></li>


	<li>


		<a classname="" href="http://www.rovingnetworks.com/documents/RN-41.pdf" name="Roving Networks Bluetooth module datasheet" target="_blank">Roving Networks Bluetooth<sup><font face="Tahoma, sans-serif"><b>&reg;</b></font></sup> module datasheet</a><br />


		<a href="http://www.sparkfun.com/datasheets/RF/RN-24-guide.pdf" id="Roving Networks RN-24 Usage Guide" name="Roving Networks RN-24 Usage Guide" target="_blank"></a></li>


	<li>


		<a href="http://www.sparkfun.com/tutorials/67" target="_blank">Check out our Bluetooth Tutorial</a></li>


</ul>


moduleID: atlas-sientific_D.O. Circuit
family: dissolved oxygen
fritzingversion: 0.4.1b.07.17.4356
author: Atlas Scientific
title: D.O. Circuit
label: D.O. Circuit
path: core/atlas-sientific_D.O. Circuit.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">Our modern understanding of how oxygen dissolves in water comes from the work of Dr. Ray Weiss. At the time when he published his findings, January 12, 1970, virtually no one had a computer. The equation he developed was so complex; he had to publish lengthy look-up tables so people could determine the correct dissolved oxygen levels quickly. At the time, Dissolved Oxygen was an exotic parameter that could only be accurately measured by governments and universities. Who would ever need to know such information anyway? Today, D.O. readings are used in so many different industries it would be ridiculous to list them all here. The Atlas Scientific D.O. Circuit is our fifth generation Dissolved Oxygen Circuit. The Atlas Scientific Dissolved Oxygen Circuit has been designed specifically to help engineers manufacture their own, custom built, scientific equipment. An easy to use data protocol and a simple instruction set means the Atlas Scientific D.O. Circuit takes only minutes to set up.</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">The Atlas Scientific Dissolved Oxygen Circuit is designed for both continuous and intermittent readings. After calibration, the Dissolved Oxygen Sensor can be immersed in a liquid and operate continuously for 12 months before recalibration is recommended.</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Full range D.O. readings +/- 0.1</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Accuracy within two significant figures (XX.XX Mg/L)</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Temperature dependent or temperature independent readings</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Fresh water/Saltwater/Brackish water readings</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Conductivity dependent or conductivity independent readings</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Simple 5 second calibration</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Data output is in Mg/L</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Dimensions: 13.9 mm X 20 mm (0.54&quot; X0.78&quot;)</span></p></body></html>


moduleID: LilyPad-Button-v12
family: microcontroller board (lilypad)
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Fabian Althaus
title: LilyPad Button Board
date: 2013-05-26
path: core/LilyPad-Button-v12.fzp
description:
We designed this board to give the user a very discrete button without any sharp edges. Button closes when you push it and opens when you release (momentary push button).

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles.

Dimensions:

8x16mm
Thin 0.8mm PCB


moduleID: diac_db3_d93f6c1a94ffd52562268be2e62b9775_9
family: diode
version: 4
fritzingversion: 0.1.beta.1396
author: KingDarBoja
title: DIAC Diode
label: DB
spice: D{instanceTitle} {net connector1} {net connector0} DI_1N4001
path: core/diac_diode_db3.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Standard DIAC (Diode AC) which acts as bi-direccional semiconductor switch based on DB3 STMicroelectronics.</p></body></html>

spicemodel:
*SRC=1N4001;DI_1N4001;Diodes;Si;  50.0V  1.00A  3.00us   Diodes, Inc. diode
.MODEL DI_1N4001 D  ( IS=76.9p RS=42.0m BV=50.0 IBV=5.00u CJO=39.8p  M=0.333 N=1.45 TT=4.32u )


moduleID: DeadOn RTC - DS3234 Breakout-v11
family: real time clock breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: DeadOn RTC - DS3234 Breakout
date: 2011-07-08
path: core/DeadOn RTC - DS3234 Breakout-v11.fzp
description:
<p>


	<strong>Description:</strong> Here is a real time clock based on the DS3234 Real Time Clock IC. The DS3234 is a low-cost, extremely accurate SPI bus real-time clock with an integrated temperature-compensated crystal oscillator and crystal.</p>


<p>


	The RTC maintains seconds, minutes, hours, day, date, month, and year information. The date at the end of the month is automatically adjusted for months with fewer than 31 days, including corrections of leap year. The clock operates in either the 24-hour or 12-hour format with AM/PM indicator. Two programmable time-of-day alarms and a programmable square-wave output are provided.</p>


<p>


	The underside of the board holds a 12mm coin-cell battery holder for battery backup.</p>


<p>


	<strong>Note:</strong> These do not include a battery. See the related products below for a battery.</p>


<p>


	<strong>Features:</strong></p>


<ul>


	<li>


		+-2ppm accuracy</li>


	<li>


		Two alarms</li>


	<li>


		SPI output</li>


	<li>


		Low power consumption</li>


	<li>


		Accurate calendar up to year 2100</li>


	<li>


		Battery backup included</li>


</ul>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/BreakoutBoards/DeadOn%20RTC%20-%20DS3234%20Breakout-v11.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/BreakoutBoards/DeadOn RTC - DS3234 Breakout-v11.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/BreakoutBoards/DS3234.pdf" target="_blank">Datsheet</a> (DS3234)</li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/BreakoutBoards/DS3234_Example_Code.c" target="_blank">Example Code</a></li>


</ul>


moduleID: atlas-sientific_pH Circuit
family: ph
fritzingversion: 0.4.1b.07.17.4356
author: Atlas Scientific
title: pH Circuit
label: pH Circuit
path: core/atlas-sientific_pH Circuit.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">Ph circuit designs that are available on the Internet today are antiquated and use a significant number of overly complex analog components. Atlas Scientific has reinvented and refined the pH Circuit of yesteryear. The Atlas Scientific pH Circuit is our fifth generation pH Circuit. The Atlas Scientific pH Circuit enables the engineer to easily incorporate scientific grade pH monitoring into your embedded system using modern components and communication methods. With a wide operating voltage (2.5V to 5.5V) and a simple asynchronous serial communication protocol, this is an easy to use pH Circuit specifically designed for modern embedded computer systems. The Atlas Scientific pH Circuit is designed for both continuous and intermittent readings. After calibration, the pH Sensor can be immersed in a liquid and operate continuously for 12 months before recalibration is recommended. </span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Full range pH reading from .01 to 14.00</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Accuracy within two significant figures (XX.XX)</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Single reading or continuous reading modes</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Temperature dependent or independent readings</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Simple calibration protocol</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Simple asynchronous serial connectivity (voltage swing 0-VCC)</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Simple instruction set consisting of only 11 commands</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Micro footprint circuitry</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Debugging LED's</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• 2.5V to 5.5V operational voltage</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Low power consumption</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Dimensions: 14mm X 20.16mm (0.55&quot; X0.79&quot;)</span></p></body></html>


moduleID: AlphaNumericDisplay-v13
family: display
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Serial Alphanumeric Display Driver
date: 2011-07-08
path: core/AlphaNumericDisplay-v13.fzp
description:
<p>


	<strong>Description:</strong> The Serial Alphanumeric Display Driver allows you to communicate with alphanumeric displays over a simple SPI interface. Based on the A6282 IC, these boards work well with all of our alphanumeric displays and we have even provided a library listed below.</p>


<p>


	You can daisy-chain as many displays as you would like to create scrolling messages. Each board has both input and output headers that connect to each other. All you need to do is define the number of displays and your message. Check the example code below.</p>


<p>


	<strong>Note:</strong> This product includes only the carrier board. You will need to provide your own alphanumeric display. Check the related products below for ones that will work.</p>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Components/AlphaNumericDisplay-v13.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Components/AlphaNumericDisplay-v13.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Components/SMD/A6282.pdf" target="_blank">Datasheet</a> (A6282)</li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Components/AlphaNumeric_Driver.pde">Example Arduino Code</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Components/AlphaNumeric_Driver-v13.zip">Arduino Library</a></li>


</ul>


moduleID: GSM-Quectel_updateTID_2_v1.3
family: arduino shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: f.althaus
title: Arduino GSM Shield
date: 2013-05-25
path: core/GSM-Quectel_updateTID_2_v1.3.fzp
description:
The Arduino GSM Shield allows an Arduino board to connect to the internet, make/receive voice calls and send/receive SMS messages. The shield uses a radio modem M10 by Quectel (datasheet). It is possible to communicate with the board using AT commands. The GSM library has a large number of methods for communication with the shield.

The shield uses digital pins 2 and 3 for software serial communication with the M10. Pin 2 is connected to the M10’s TX pin and pin 3 to its RX pin. See these notes for working with an Arduino Mega, Mega ADK, or Leonardo. The modem's PWRKEY pin is connected to Arduino pin 7.

The M10 is a Quad-band GSM/GPRS modem that works at frequencies GSM850MHz, GSM900MHz, DCS1800MHz and PCS1900MHz. It supports TCP/UDP and HTTP protocols through a GPRS connection. GPRS data downlink and uplink transfer speed maximum is 85.6 kbps.

To interface with the cellular network, the board requires a SIM card provided by a network operator. See the getting started page for additional information on SIM usage.

The most recent revision of the board uses the 1.0 pinout on rev 3 of the Arduino Uno board.


moduleID: SparkFun_LSM303C_6_DOF_IMU_Breakout
family: sparkfun breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: f.althaus
title: LSM303C (6 DOF)
date: 2015-10-04
path: core/SparkFun_LSM303C_6_DOF_IMU_Breakout.fzp
description:
SparkFun 6 Degrees of Freedom Breakout - LSM303C
The LSM303C is a 6 Degrees of Freedom (6DOF) inertial measurement unit (IMU) in a single package, specifically developed as an eCompass device. Due to the IC housing a 3-axis accelerometer and a 3-axis magnetometer combined with its low cost, the LSM303C was perfect for us to create this small breakout board just for you! Each LSM303C Breakout has been designed to be super-flexible and can be configured specifically for many applications. The LSM303C Breakout can be configured to generate an interrupt signal for free-fall, motion detection and magnetic field detection!

The range of each sensor on the LSM303C is configurable: the accelerometer’s scale can be set to ±2g, ±4g, ±6g, or ±8g, while the magnetometer has full-scale range of ±16 gauss, and supports I2C and SPI communication.

Each pin has been broken out on the LSM303C, with 10 plated through hole connections featuring power and I2C and SPI functionality, interrupt outputs, and accelerometer and magnetometer data out. Please keep in mind that the LSM303C is a 2.5V device so supplying voltages greater than ~4.8V can permanently damage the IC. As long as your Arduino has a 3.3V supply output, you shouldn’t need any extra level shifting.


moduleID: ProtoShield-v25
family: prototype shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino ProtoShield
date: 2011-07-08
path: core/ProtoShield-v25.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> Riding on the waves of the very popular Arduino USB board is this small prototyping shield. Originally spawned with collaboration between the folks at <a href="http://www.sparkfun.com" target="_blank">SFE</a> and <a href="http://itp.nyu.edu/itp/" target="_blank">ITP @ NYU</a>, the ProtoShield mates with the Arduino USB board and gives the user a small soldering area, two general LEDs, access to a BlueSMiRF socket, a general pushbutton switch, and most important of all - the Arduino reset switch is brought to the top level. A <a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=191">ProtoShield quickstart guide</a> is available!<br />


	<br />


	This comes in kit form and must be soldered together by the end user. Please note - we do not ship assembly instructions, but you can find a big, clean photographed assembly guide <a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=181">here</a>! There are a few tutorials on assembly listed below. All soldering is through-hole (relatively easy) but always check your component orientation before soldering!<br />


	<br />


	The kit is pictured with the bread-board option. We highly recommend this breadboard! See the related items below for all the colorful options of breadboards you have.<br />


	<br />


	<span style="font-weight: bold;">Kit Includes:</span></p>


<ul>


	<li>


		1x ProtoShield bare PCB</li>


	<li>


		2x <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9280" name="" target="_self">Stackable Headers 6-pin</a></li>


	<li>


		2x <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9279" name="" target="_self">Stackable Headers 8-pin</a></li>


	<li>


		2x <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=532" name="" target="_self">5mm Basic Yellow LEDs</a></li>


	<li>


		2x <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=8377" name="" target="_self">330 Ohm resistors </a></li>


	<li>


		1x <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=8374" name="" target="_self">10k resistor</a></li>


	<li>


		2x <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=97" name="" target="_self">Momentary push buttons</a></li>


	<li>


		2x <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=8375" name="" target="_self">0.1uF Ceramic Capacitors </a></li>


</ul>


<p>


	<span style="font-weight: bold;">Features:<br />


	</span></p>


<ul>


	<li>


		All Arduino pins are brought to the top level</li>


	<li>


		5V, GND, and Vin pins are exposed as well</li>


	<li>


		BlueSMiRF socket for wireless communication between Arduinos</li>


	<li>


		2 general use LEDs</li>


	<li>


		1 general use button</li>


	<li>


		Reset button brought to top level</li>


</ul>


<p>


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=191">ProtoShield Quickstart Guide</a></li>


	<li>


		<a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=181">Assembly Instructions</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/ProtoShield-v25.pdf" name="" target="_blank">ProtoShield Schematic</a></li>


	<li>


		<a href="http://arduino.cc" target="_blank">Arduino Home Page</a></li>


	<li>


		<a classname="" href="http://www.atomicsalad.com/archive/2010/02/02/tutorial_sparkfun_protoshield_for_arduino_assembly_updated.php" name="" target="_blank">Assembly Tutorial</a> by Bob Gallup</li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/ProtoShield-v25.zip" name="" target="">ProtoShield Eagle Files</a></li>


</ul>


<p>


	<strong>Standalone Circuit Board:</strong><span style="font-weight: bold;"> </span><a href="http://batchpcb.com/index.php/Products/31479" target="_blank">BatchPCB: Arduino ProtoShield</a></p>


moduleID: raspberry_pi_zero_rev-1.1_1c1fc4df93cfbdef7271f409bee4bb03_2
family: //obsolete//cpu board (raspberry pi)
version: 1
replacedby: raspberry_pi_zero_rev-1.1
fritzingversion: 0.9.0b.04.10.5970
author: Anudit Nagar
title: Raspberry Pi Zero
label: Raspberry Pi Zero
path: obsolete/Raspberry Pi Zero.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The Raspberry Pi Zero is half the size of a Model A+, with twice the utility. A tiny Raspberry Pi that’s affordable enough for any project! </p>
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Symbol';">·</span><span style=" font-family:'Times New Roman'; font-size:7pt;">         </span>1Ghz, Single-core CPU </p>
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Symbol';">·</span><span style=" font-family:'Times New Roman'; font-size:7pt;">         </span>512MB RAM </p>
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Symbol';">·</span><span style=" font-family:'Times New Roman'; font-size:7pt;">         </span>Mini HDMI and USB On-The-Go ports </p>
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Symbol';">·</span><span style=" font-family:'Times New Roman'; font-size:7pt;">         </span>Micro USB power </p>
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Symbol';">·</span><span style=" font-family:'Times New Roman'; font-size:7pt;">         </span>HAT-compatible 40-pin header </p></body></html>


moduleID: IRF520_mos_module_7115327c8b8b62b1ba195a98bd66e077_5
family: mosfet driver module
version: 4
author: KingDarBoja
title: IFR520 MOS module
taxonomy: part.dip.8.pins
path: core/IFR520_MOS_module.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Breakout board for the IFR520 MOSFET transistor. The module is designed to switch heavy DC loads from a single digital pin of your microcontroller. Its main purpose is to provide a low cost way to drive a DC motor for robotics applications, but the module can be used to control most high current DC loads. Screw terminals are provided to interface to your load and external power source. An LED indicator provides a visual indication of when your load is being switched.</p></body></html>


moduleID: Real_Time_Clock_Module___DS1307_RTC_Breakout_Board
family: real time clock breakout
fritzingversion: 0.6.3b.08.16.5401
author: Mike
title: Real Time Clock Module - DS1307 RTC Breakout Board
date: 2011-09-07
path: core/Real_Time_Clock_Module___DS1307_RTC_Breakout_Board.fzp
description:
This a custom designed module for the DS1307 Real Time Clock. The module comes fully assembled and pre-programmed with the current time (ok, so it's our current time - MST). The included Lithium coin cell battery (CR1225 41mAh) will run the module for a minimum of 9 years (17 years typical) without external 5V power. The DS1307 is accessed via the I2C protocol. We've written a test-bed to program the modules. This test-bed code should give you some insight on how to interface the module to any microcontroller using our example software I2C and BCD routines.











Features:











Two wire I2C interface 











Hour : Minutes : Seconds AM/PM 











Day Month, Date - Year 











Leap year compensation 











Accurate calendar up to year 2100 











Battery backup included 











1Hz output pin 











56 Bytes of Non-volatile memory available to user











Dimensions: 0.75x0.75" (20x20mm)























Documents:











RTC Module Schematic 











RTC Module Dimensional Drawing 











DS1307 Datasheet 











Wiring Example











Software: 











Example 16F88 code 











Arduino Tutorial. Thanks John Vaughters! 











Arduino Tutorial in Portuguese. Thanks Daniel Gonçalves! 











Bildr Tutorial


moduleID: atlas-sientific_FLO-30 Circuit
family: flow
fritzingversion: 0.4.1b.07.17.4356
author: Atlas Scientific
title: FLO-30 Circuit
label: FLO-30 Circuit
path: core/atlas-sientific_FLO-30 Circuit.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">Reading liquid flow may not appear to be such a challenge to the embedded systems engineer. It certainly seems easy enough to do, however, as the saying goes, 'the devil is in the details'. In order to achieve true scientific grade liquid flow readings you simply cannot just count pulses.</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">The FLO-30 Flow Meter Circuit has been designed around quality components. The flow meters that the FLO-30 can interface with are of the highest quality. The firmware on the FLO-30 Flow Meter Circuit is a very fast, real time operating system capable of managing the complex timing events needed to accurately read and report flow rates without ever missing a beat.</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Supports 3 types of flow meter</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• TurboFlow-226000 Polypropylene: 800 ml/min to 7.6 LPM</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">   Accurate to ± 1mL/min</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• RotoFlow-155421 Polypropylene: 15.14 LPM to 75.70  LPM</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">   Accurate to ± 5mL/min</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• RotoFlow-194761 Brass: 11.35 LPM to 113.56 LPM</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">   Accurate to ± 15mL/min</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Scientific grade results</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Food Safe</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Gasoline Safe</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Diesel Safe</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Kerosene Safe</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Calculates total volume flow, L/minute, L/hour</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Enable/disable flow meter</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Flow indicator LED blinks with each turn of the flow meter</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Built in total volume flow alarm</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Single reading or continuous reading modes</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Simple asynchronous serial connectivity (voltage swing 0-VCC)</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Simple instruction set consisting of only 12 commands</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Micro footprint circuitry</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Debugging LED's</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• 2.5V to 5.5V operational voltage</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Low power consumption</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Dimensions: 14mm X 20.3mm (0.55&quot; X0.79&quot;)</span></p></body></html>


moduleID: SparkFun-Connectors-SMA_EDGE-
family: sparkfun antenna connector
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: SMA Antenna Connector
label: J$
date: 2013-02-13
path: core/sparkfun-connectors-sma_edge-.fzp
description:
<b>SMA Antenna Connector</b>
End launch SMA connector. The paste layer has been removed so that the connector can be hand soldered onto the board after reflow.


moduleID: 3661e4bbb7d863e04ccf7a9994dc65ff
family: //obsolete//microcontroller board (arduino)
version: 4
replacedby: Arduino-Fio-v22
fritzingversion: 0.4.0b.06.21.4282
author: André Knörig
title: Arduino Fio
label: Arduino
date: 2010-07-01
path: obsolete/Arduino Fio.fzp
description:
The Arduino Fio is a microcontroller board based on the ATmega328P runs at 3.3V and 8 MHz. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 8 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. It has connections for a Lithium Polymer battery and includes a charge circuit over USB. An XBee socket is available on the bottom of the board.
The Arduino Fio is intended for wireless applications. The user can upload sketches with an a FTDI cable or Sparkfun breakout board. Additionally, by using a modified USB-to-XBee adaptor such as XBee Explorer USB, the user can upload sketches wirelessly. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires.
The Arduino Fio was designed by Shigeru Kobayashi and SparkFun Electronics, and manufactured by SparkFunElectronics.

http://arduino.cc/en/Main/ArduinoBoardFio


moduleID: 1e03b5a4-ed62-11dd-b332-001a4d5c439f
family: //obsolete//mystery part
version: 1
replacedby: mystery_part_6
author: Fritzing Part-o-matic
title: Mystery Part - 6 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.6pins
path: obsolete/mystery_part6.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 6 pins on a 100 mil inline pin header footprint.


moduleID: Joystick-Breakout-v11
family: joystick breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Thumb Joystick
date: 2011-07-08
path: core/Joystick-Breakout-v11.fzp
description:
<p>


	<span style="font-weight: bold;">Description: </span>This is the breakout board for the <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9032" name="" target="">thumb joystick</a>. Pins are broken out to a 0.1&quot; header and includes 4 mounting holes in the corners.<br />


	<br />


	<span style="font-weight: bold;">Dimensions:</span> 1&quot; x 1.25&quot;</p>


moduleID: blueIOT_Rc1-final
family: microcontroller board (blueiot)
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: joev
title: blueIOT core
date: 2014-10-03
path: core/blueIOT_Rc1-final.fzp
description:
Painting the Internet of Things Blue. blueIOT is an tiny little board in the size of an SD Card which comes with latest sensors for

measuring acceleration (3 axis), humidity, altitude and temperature. The integrated Bluetooth Low Energy (BLE) module is certified 

and allows easy communication with smartphones and home gateways. All this runs with a single coin cell battery at 3V while consuming

in average 1uA in managed sleep mode. All this is a perfect basis for wearable, fitness tracker, beacons for in door navigation and 

more. Programming is supported with the Arduino IDE using an FTDI cable. For development there is an SD card slot for recording 

sensor data up to 32 GByte. For further extension blueIOT comes with exposed PINs for I2C bus, analog and digital I/Os. OLEDs 

from Adafruit with I2C bus are supported right away. Further details and sample projects can be found on www.Fab-Lab.eu


moduleID: bf73a00d2ecd04be25675ebfb2d130c0
family: humidity breakout
fritzingversion: 0.7.0b.02.01.5801
author: wreutz
title: Humidity Temperature Sensor SHT15
date: 2012-02-20
path: core/Humidity_Sensor_SHT15.fzp
description:
<p><b>Description:</b></p>
      <p>This is a simple breakout board for the SHT15 humidity sensor from Sensirion. The SHT15 digital humidity and temperature sensor is fully calibrated and offers high precision and excellent long-term stability at low cost. The digital CMOSens Technology integrates two sensors and readout circuitry on one single chip.

      These sensors are really impressive! Very sensitive and straight forward to use. Board comes assembled and tested with the SHT15.</p>

      <p><b>Features:</b></p>

<ul>
	<li>2 factory calibrated sensors for relative humidity & temperature</li>
	<li>Digital 2-wire interface</li>
	<li>Precise dewpoint calculation possible</li>
	<li>Measurement range: 0-100% RH</li>
	<li>Absolute RH accuracy: +/- 2% RH (10...90% RH)</li>
	<li>Repeatability RH: +/- 0.1% RH</li>
	<li>Temp. accuracy: +/- 0.3°C @ 25°C</li>
	<li>Fast response time < 4 sec.</li>
	<li>Low power consumption (typ. 30 µW)</li>
	<li>Low cost</li>
	<li>High precision sensor at low cost</li>
	<li>Leading CMOSens Technology for superior long-term stability</li>
</ul>

<p><b>Applications:</b></p>

<ul>
	<li>Precise data logging</li>
	<li>Transmitters</li>
	<li>Automation & process control</li>
	<li>Building control and HVAC</li>
	<li>Test & Measurement</li>
	<li>Medical</li>
</ul>

<p><b>Documents:</b></p>

<ul>
  <li>
    <a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Pressure/SHT1x-Breakout-v13.pdf" name="" target="_blank">Schematic</a></li>
  </li>
  <li>
     <a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Pressure/SHT1x-Breakout-v13.zip" name="" target="_blank">Eagle Files</a></li>
  </li>
  <li>
    <a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Datasheet-humidity-sensor-SHT1x.pdf" name="" target="_blank"> SHT1x Datasheet</a></li>
  </li>
  <li>
     <a classname="" href="http://www.sparkfun.com/datasheets/Sensors/SHT15-Testing-v11.zip" name="" target="_blank">Example C Code (PIC 16F88)</a></li>
  </li>
  <li>
     <a classname="" href="http://wiring.org.co/learning/basics/humiditytemperaturesht15.html" name="" target="_blank">Wiring Example</a></li>
  </li>
  <li>
     <a classname="" href="http://www.sensirion.com/en/02_sensors/03_humidity/00_humidity_temperature_sensor/03_humidity_sensor_sht15.htm" name="" target="_blank">Application Notes</a></li>
  </li>
  <li>
     <a classname="" href="http://www.sensirion.com/images/getFile?id=11" name="" target="_blank">Calibration Certificate</a></li>
  </li>
  <li>
     <a classname="" href="http://www.sensirion.com/images/getFile?id=123" name="" target="_blank">RoHS Certificate</a></li>
  </li>
</ul>


moduleID: A4950_f96ca75d4706a24394f9603716d558ed_37
family: motor driver
version: 4
fritzingversion: 0.7.2b
author: Steven Vogel
title: A4950
label: IC
path: core/A4950_37.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Full-Bridge DMOS PWM Motor Driver</p></body></html>


moduleID: SparkFun-Sensors-CAMERA_CMOS_CON-PLUG
family: sparkfun camera
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: 640x480 CMOS Color Camera
label: U
date: 2013-02-13
path: core/sparkfun-sensors-camera_cmos_con-plug.fzp
description:
<b>640x480 CMOS Color Camera</b>
Footprint proven. Spark Fun Electronics Camera SKU : SEN-00637, Mating Connector SKU : SEN-00638


moduleID: SparkFun-Connectors-ATX24-RH
family: sparkfun atx24 connector
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: ATX24 Pin Power Supply Connector
label: J
date: 2013-02-13
path: core/sparkfun-connectors-atx24-rh.fzp
description:
<b>ATX24 Pin Power Supply Connector</b> This is a good connector for connecting a computer power supply to a PCB. It's massive, but provides many amps of power at 5V and 12V. SKU: PRT-09498


moduleID: SparkFun-Connectors-M05-SMD2
family: sparkfun pin header
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Header 5
label: JP
date: 2013-02-13
path: core/sparkfun-connectors-m05-smd2.fzp
description:
<b>Header 5</b>
Standard 5-pin 0.1 header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). Molex polarized connector foot print use with SKU : PRT-08230 with associated crimp pins and housings.


moduleID: SparkFun-Displays-ALPHANUMERIC-PTH
family: sparkfun led display
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Alphanumeric LED Display
label: U
date: 2013-02-13
path: core/sparkfun-displays-alphanumeric-pth.fzp
description:
<b>Alphanumeric LED Display</b> Common anode. Multiple LEDs on some segments. Multiple LED colors available. Works great with A6282 driver IC. Decimal points are unfornately not connected. SKU: COM-09933.


moduleID: intel-arduino_galileo
family: microcontroller board (intel)
version: 5
fritzingversion: 0.5.2b.02.18.4756
author: Fabian Althaus
title: Intel Galileo
path: core/intel-arduino_galileo.fzp
description:
Galileo is a microcontroller board based on the Intel® Quark SoC X1000 Application Processor, a 32-bit Intel Pentium-class system on a chip (datasheet). It’s the first board based on Intel® architecture designed to be hardware and software pin-compatible with Arduino shields designed for the Uno R3. Digital pins 0 to 13 (and the adjacent AREF and GND pins), Analog inputs 0 to 5, the power header, ICSP header, and the UART port pins (0 and 1), are all in the same locations as on the Arduino Uno R3. This is also known as the Arduino 1.0 pinout.
Galileo is designed to support shields that operate at either 3.3V or 5V. The core operating voltage of Galileo is 3.3V. However, a jumper on the board enables voltage translation to 5V at the I/O pins. This provides support for 5V Uno shields and is the default behavior. By switching the jumper position, the voltage translation can be disabled to provide 3.3V operation at the I/O pins.
Of course, the Galileo board is also software compatible with the Arduino Software Development Environment (IDE), which makes usability and introduction a snap. In addition to Arduino hardware and software compatibility, the Galileo board has several PC industry standard I/O ports and features to expand native usage and capabilities beyond the Arduino shield ecosystem. A full sized mini-PCI Express slot, 100Mb Ethernet port, Micro-SD slot, RS-232 serial port, USB Host port, USB Client port, and 8MByte NOR flash come standard on the board.
Visit the FAQ page for further informations.


moduleID: SparkFun-Connectors-M12-MACHINE-PIN_LOCK
family: sparkfun pin header
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Header 12
label: JP
date: 2013-02-13
path: core/sparkfun-connectors-m12-machine-pin_lock.fzp
description:
<b>Header 12</b>
Standard 12-pin 0.1 header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115).


moduleID: AnalogDevices_SSM2220S_subpart1
family: adi-transistor
version: 4
fritzingversion: 0.7.12b.02.13.6882
author: Analog Devices
title: SSM2220 - Audio Dual Matched PNP Transistor
label: 1
path:
C:/Users/jnoack/AppData/Roaming/Fritzing/partfactory/1416ce2b2368fabea276407ad0fa4d4f/core/AnalogDevices_SSM2220S_subpart1.fzp


moduleID: rtc_ds3231_breakout
family: rtc
version: 7
fritzingversion: 0.9.3b
author: Richard Bruneau, f.althaus
title: ZS-042 RTC Module
label: ZS-042 RTC
path: core/rtc_ds3231_breakout.fzp
description:
This is the ZS-042 RTC module which uses the Maxim DS3231 real time clock IC. The module has a battery holder for a LIR2032 or CR2032. The module also includes an Atmel AT24C32 32K EEPROM for storing important information. The module can operate at 3V3 and 5V.


moduleID: AnalogDevices_ADTL082ARZ_subpart2
family: adi-opamp-dual
version: 4
fritzingversion: 0.7.12b.02.13.6882
author: Analog Devices
title: ADTL082 - Dual JFET Input Op Amps
label: 2
spice:
X{instanceTitle}A {net connector3} {net connector2} {net connector8} {net connector4} {net connector1} ADTL082
X{instanceTitle}B {net connector5} {net connector6} {net connector8} {net connector4} {net connector7} ADTL082

path:
C:/Users/jnoack/AppData/Roaming/Fritzing/partfactory/1416ce2b2368fabea276407ad0fa4d4f/core/AnalogDevices_ADTL082ARZ_subpart2.fzp


moduleID: femtobuck
family: sparkfun femto
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: f.althaus
title: FemtoBuck LED Driver
date: 2015-10-04
path: core/femtobuck.fzp
description:
 This is the FemtoBuck, a small-size single-output constant current LED driver. Each FemtoBuck has the capability to dim a single high-power channel of LEDs from 0-350mA at up to 36V while the dimming control can be either accessed via PWM or analog signal from 0-2.5V. This board is based off of the PicoBuck LED Driver, developed in collaboration with Ethan Zonca, except instead of blending three different LEDs on three different channels the FemtoBuck controls just one.


moduleID: Arduino Motor Shield rev3
family: arduino shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: althaus
title: Arduino Motor Shield (Rev3)
path: core/Arduino_Motor_Shield_rev3.fzp
description:
The Arduino Motor Shield is based on the L298 (datasheet), which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. It lets you drive two DC motors with your Arduino board, controlling the speed and direction of each one independently. You can also measure the motor current absorption of each motor, among other features. The shield is TinkerKit compatible, which means you can quickly create projects by plugging TinkerKit modules to the board. 


moduleID: SparkFun-Connectors-IPOD_CONNECTOR_FEMALE-
family: sparkfun ipod
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: iPod Female Connector
label: U
date: 2013-02-13
path: core/sparkfun-connectors-ipod_connector_female-.fzp
description:
<b>iPod Female Connector</b>
This is the connector found inside current iPods. Use this connector to attach to iPod accessories like Nike+iPods, etc. Schematic and footprint are not yet production proven. Spark Fun Electronics SKU : DEV-08035


moduleID: NRF24L01_22e0249967228a8065b800b57589b75e_25
family: //obsolete//radio
version: 4
replacedby: NRF24L01_fix
fritzingversion: 0.5.2b.02.18.4756
author: Doume
title: NRF24L01
path: obsolete/NRF24L01_22e0249967228a8065b800b57589b75e_25.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'.Lucida Grande UI'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">2.4 Ghz NRF24L01 </p></body></html>


moduleID: SparkFun-PowerIC-V_REG_NCP1400-SOT23-5
family: sparkfun step-up
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Switching step-up voltage regulator
label: IC
date: 2013-02-13
path: core/sparkfun-poweric-v_reg_ncp1400-sot23-5.fzp
description:
<b>Switching step-up voltage regulator</b>
NCP1400 switiching regulator takes single cell AA and outputs 100mA at 3.3V or 5V with minimal number of external components.


moduleID: Fairchild_MBR745
family: semiconductor
version: 5
fritzingversion: 0.1.1255
author: S. van Doorn, F.Althaus
title: MBR745 Schottky
label: D
path: core/Fairchild_MBR745.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'.Lucida Grande UI'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Arial,Bold'; font-size:12pt;">Features </span></p>
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Arial'; font-size:9pt;">• LowPowerLoss,HighEfficiency<br />• HighSurgeCapacity<br />• MetalSiliconJunction,MajorityCarrierConduction • HighCurrentCapacity,LowForward-VoltageDrop • GuardRingforOver-VoltageProtection(OVP) </span></p>
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Arial'; font-size:9pt;">Usage:</span></p>
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Arial'; font-size:9pt;">Low-Voltage,High-FrequencyInverters </span><span style=" font-family:'Arial'; font-size:8pt;">• </span><span style=" font-family:'Arial'; font-size:9pt;">Free Wheeling and Polarity Protection </span></p></body></html>


moduleID: SparkFun-Passives-RPACK*--BUSSED-SIP-PTH-5
family: sparkfun resistor (bussed)
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: RPACK*
label: R
date: 2013-02-13
path: core/sparkfun-passives-rpack_--bussed-sip-pth-5.fzp
description:
BOURNS 4600X series thick-film SIP resistor packs<br>
<br>
Five resistors bussed to a single pin (denoted by dot).<br>
0.2W / resistor<br>
<a href=http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Components/General/4600x.pdf>datasheet</a><br>
<br>
SFE parts COM-10855 (330), COM-10856 (10K)<br>


moduleID: 4081_4_x_2_input_AND_gate_multipart_subpart5
family: 40xx 4x2 input logic gate (multi-part)
version: 4
author: Stephen G. Parry
title: 4081 4 x 2 Input AND Gate, multi-part
label: 4
taxonomy: part.dip.14.pins
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">4081 4 x 2 Input AND Gate with sub-parts</span></p></body></html>

path:
C:/Users/jnoack/AppData/Roaming/Fritzing/partfactory/1416ce2b2368fabea276407ad0fa4d4f/core/4081_4_x_2_input_AND_gate_multipart_subpart5.fzp


moduleID: gs1011_breakout-v11
family: wireless
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: GainSpan WiFi Breakout
date: 2011-11-29
path: core/gs1011_breakout-v11.fzp
description:
<p>


	<strong>Description:</strong> This is a breakout for the GS1011 ultra low-power wireless chip from GainSpan. The GS1011 device is a highly integrated ultra low power wireless single chip which contains an 802.11b radio, media access controller (MAC) and baseband processor, on-chip flash memory and SRAM, and an applications processor all on a single package. Along with its embedded software stack it offers a highly scalable, reliable, manageable and secure wireless link to meet the growing demand of wireless sensor networks utilizing the broadly accepted IEEE 802.11b,g,n standards infrastructure.</p>


<p>


	<strong>Features:</strong></p>


<ul>


	<li>


		Supports IEEE 802.11</li>


	<li>


		Seamlessly integrates with existing 802.11b/g infrastructure and utilizes the 802.11 security, manageability, ease-of-use, and quality of service</li>


	<li>


		802.11i/WPA2 Authentication, AES Hardware encryption</li>


	<li>


		Optimized for battery powered application with very low power consumption for multiple years of battery life</li>


	<li>


		Range 200-300M+ Outdoor (Typical Estimate)</li>


	<li>


		Two 32-bit ARM7 CPU @44MHz, 1 for applications (APP) : 1 dedicated to radio (WLAN)</li>


	<li>


		2 UART , I2C, 2 SPI, 2 ADC, 1 PWM, and 32 GPIO</li>


	<li>


		Operates at 3.3V</li>


</ul>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/BreakoutBoards/gs1011_breakout-v11.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/BreakoutBoards/gs1011_breakout-v11.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/BreakoutBoards/GS1011M Datasheet ver 1.0.pdf" target="_blank">Datasheet</a> (GS1011)</li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Wireless/WiFi/Serial_to_WiFi_Adapter_Guide ver 5_3.pdf" target="_blank">Command Set</a></li>


</ul>


moduleID: cb9c6041c0b15c9c1a63560527d7693a
fritzingversion: 0.3.14b.12.23.3905
author: nvillar
title: Peppermill Power Board
label: Peppermill Power Board
date: 2010-02-05
path: core/Peppermill Power Board.fzp
description:
The Peppermill Power Board (PPB) lets you turn a geared DC motor into a human-powered device.  It also doubles as a sensor that provides information about the direction and rate of turn. 

HOW TO USE

Attach the terminals of a geared DC motor to the grey connector.  Use the white switch to select the maximum operating voltage for your target circuit (2.5, 3.3 or 5.0 Volts), and connect the PPB to your target circuit using the header pins. The pins labelled V+ and GND provide a regulated power supply, and pins Speed and Direction can be connected to analog inputs on a microcontroller. 

The PPB has a built-in PIC microcontroller and an array of LEDs to provide instant feedback about the direction and rate of turn. To use this feature, set the black switch to CAL (Calibrate). Give the motor a quick turn, until you see the LEDs light up briefly. Set the switch to RUN, and when you turn the motor the LEDs should light up in a sequence that matches the direction and rate of turn. 


moduleID: MPU6050_GY521_782354e339f672575bb20992ece4ab1b_9
family: sensor
version: 4
author: KingDarBoja
title: InvenSense MPU6050
taxonomy: part.dip.8.pins
path: core/InvenSense_MPU6050.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The InvenSense MPU-6050 sensor contains a MEMS accelerometer and a MEMS gyro in a single chip. It is very accurate, as it contains 16-bits analog to digital conversion hardware for each channel. Therefor it captures the x, y, and z channel at the same time. The sensor uses the I2C-bus to interface with the Arduino. </p></body></html>


moduleID: SparkFun-Electromechanical-BUTTONPAD-2X2SINGLE-KIT
family: sparkfun button pad
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: BUTTONPAD-2X2SINGLE
label: U
date: 2013-02-13
path: core/sparkfun-electromechanical-buttonpad-2x2single-kit.fzp
description:
Proto layout and schematic for 2x2 button pad with single color LEDs (used on Simon board). Panelize this device/fp to a 4x4 pad if needed. Any single-color 5mm LED should be compatible. Spark Fun Electronics SKU : COM-07835.


moduleID: Ardumoto v13
family: motor shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino Motor Shield
date: 2011-07-08
path: core/Ardumoto v13.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> The new version of this shield allows for either 3.3 or 5v logic, a separate and more robust VIN connection, and the PWM input has moved to pin 3.</p>


<p>


	This is a motor shield for Arduino&nbsp;that will control two DC motors. Based on the L298 H-bridge, the Ardumoto can drive up to 2 amps per channel. The board takes its power from the same Vin line as the Arduino board,&nbsp; includes blue and yellow LEDs to indicate active direction, and all driver lines are diode protected from back EMF.<br />


	<br />


	Control for motor attached to OUT1/2 is connected to digital line 12 (direction A) and digital line 3 (PWM A).<br />


	<br />


	Control for motor attached to OUT3/4 is connected to digital line 13 (direction B) and digital line 11 (PWM B).<br />


	<br />


	Compatible screw terminals and connectors are listed below.<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/Ardumoto_v13.pdf" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/Ardumoto%20v13.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Robotics/L298_H_Bridge.pdf" name="" target="_blank">L298 H Bridge data sheet</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/Ardumoto_test_3.pde" target="_blank">Example Arduino sketch</a></li>


	<li>


		<a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=183" target="_blank">Assembly Guide</a></li>


	<li>


		<a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=195" target="_blank">Quickstart Guide</a></li>


</ul>


<p>


	<strong>Replaces:</strong> <a href="http://www.sparkfun.com/commerce/product_info.php?products_id=9213" target="_blank">DEV-09213</a></p>


moduleID: 1e03b59d-ed62-11dd-b332-001a4d5c439f
family: //obsolete//mystery part
version: 1
replacedby: mystery_part_8
author: Fritzing Part-o-matic
title: Mystery Part - 8 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.8pins
path: obsolete/mystery_part8.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 8 pins on a 100 mil inline pin header footprint.


moduleID: RFduinoSMD_7a0c446b88e9a347beee6c109339d6d5_1
family: //obsolete//rfduino
version: 1
replacedby: RFduinoSMD_fix
fritzingversion: 0.7.5b.07.02.6130
author: Arnaud Boudou, Felix Kosmalla, Fabian Althaus
title: RFduino SMD
label: RFduinoSMD
path: obsolete/RFduinoSMD_7a0c446b88e9a347beee6c109339d6d5_1.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'.Helvetica Neue DeskInterface'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">RFduino board with SMD footprint</p></body></html>


moduleID: HMC6352-v18
family: magnetometer breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Compass Module - HMC6352
date: 2011-07-08
path: core/HMC6352-v18.fzp
description:
<p>


	<b>Description:</b> This is a very simple breakout board for the popular HMC6352. Remember the KISS mantra? We really enjoy the simplicity and ease of use with the HMC6352. If you need simple, clean, degree resolution compass heading, this is the way to go.</p>


<p>


	<span style="font-weight: bold;">Features:</span></p>


<ul>


	<li>


		Simple I2C interface</li>


	<li>


		2.7 to 5.2V supply range</li>


	<li>


		1 to 20Hz selectable update rate</li>


	<li>


		True drop-in solution</li>


	<li>


		0.5 degree heading resolution</li>


	<li>


		1 degree repeatability</li>


	<li>


		Supply current : 1mA @ 3V</li>


</ul>


<p>


	<span style="font-weight: bold;">Documents:<br />


	</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC6352-v16.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Components/HMC6352.pdf" target="_blank">HMC6352 Datasheet</a></li>


	<li>


		<a href="http://www.ssec.honeywell.com/magnetic/hmc6352.html" target="_blank">Honeywell Product Page</a></li>


	<li>


		<a href="../../../../Code/LPC2138_Test_IIC.zip" target="_blank">Example I2C project</a></li>


	<li>


		<a classname="" href="http://wiring.org.co/learning/libraries/hmc6352sparkfun.html" name="" target="_blank">Wiring Example</a></li>


	<li>


		<a classname="" href="http://lusorobotica.com/index.php/topic,36.0.html" name="" target="_blank">Example project</a> in Portuguese - Thanks Tiago!</li>


	<li>


		<a href="http://www.youtube.com/watch?v=sBKHdt0OdPg" target="_blank">Digital Compass How-To Video</a></li>


	<li>


		<a href="http://mbed.org/cookbook/HMC6352-Digital-Compass" target="_blank">mbed Example</a></li>


	<li>


		<a href="http://bildr.org/2011/01/hmc6352/">Bildr Tutorial</a></li>


</ul>


<p>


	<span style="font-weight: bold;">Dimensions:</span> 0.6x0.6&quot; (15x15mm)</p>


