/* Arduino SSD1306Ascii Library
 * Copyright (C) 2015 by William Greiman
 *
 * This file is part of the Arduino SSD1306Ascii Library
 *
 * This Library is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This Library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with the Arduino SSD1306Ascii Library.  If not, see
 * <http://www.gnu.org/licenses/>.
 */
/**
 * @file SSD1306AsciiAvrI2c.h
 * @brief Class for I2C displays using AvrI2c.
 */
#ifndef SSD1306AsciiAvrI2c_h
#define SSD1306AsciiAvrI2c_h
#include "utility/AvrI2c.h"
#include "SSD1306Ascii.h"
/**
 * @class SSD1306AsciiAvrI2c
 * @brief Class for I2C displays on AVR.
 *
 * Uses the AvrI2c class that is smaller and faster than the
 * Wire library.
 */
class SSD1306AsciiAvrI2c : public SSD1306Ascii {
 public:
  /**
   * @brief Initialize the display controller.
   *
   * @param[in] dev A device initialization structure.
   * @param[in] i2cAddr The I2C address of the display controller.
   */
  void begin(const DevType* dev, uint8_t i2cAddr) {
    m_nData = 0;
    m_i2cAddr = i2cAddr;

    m_i2c.begin(true);
    init(dev);    
  }
  /**
   * @brief Initialize the display controller.
   *
   * @param[in] dev A device initialization structure.
   * @param[in] i2cAddr The I2C address of the display controller.
   * @param[in] rst The display controller reset pin.
   */
  void begin(const DevType* dev, uint8_t i2cAddr, uint8_t rst) {
    oledReset(rst);
    begin(dev, i2cAddr);      
  }
 protected:
  void writeDisplay(uint8_t b, uint8_t mode) {
    if ((m_nData && mode == SSD1306_MODE_CMD)) {
      m_i2c.stop();
      m_nData = 0;
    }
    if (m_nData == 0) {
      m_i2c.start((m_i2cAddr << 1) | I2C_WRITE);
      m_i2c.write(mode == SSD1306_MODE_CMD ? 0X00 : 0X40);
    }
    m_i2c.write(b);
    if (mode == SSD1306_MODE_RAM_BUF) {
      m_nData++; 
    }else {      
      m_i2c.stop();
      m_nData = 0;
    }
  }
 private:
  AvrI2c m_i2c;
  uint8_t m_i2cAddr;
  uint8_t m_nData;
};
#endif  // SSD1306AsciiAvrI2c_h