<b>Supply Symbols</b><p>
GND, VCC, 0V, +5V, -5V, etc.<p>
Please keep in mind, that these devices are necessary for the
automatic wiring of the supply signals.<p>
The pin name defined in the symbol is identical to the net which is to be wired automatically.<p>
In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p>
<author>Created by librarian@cadsoft.de</author>
>VALUE
<b>SUPPLY SYMBOL</b>
<b>PIN HEADER</b> - 2.54
>NAME
>VALUE
<b>PIN HEADER</b> - 2.54
>NAME
>VALUE
<b>PIN HEADER</b> - 2.54 90°
>NAME
>VALUE
<b>PIN HEADER</b> - 2.54 90°
>NAME
>VALUE
<b>PIN HEADER</b> - 2
>NAME
>VALUE
<b>PIN HEADER</b> - 2.54 SMD
>NAME
>VALUE
<b>PIN HEADER</b> - 2.54 90°
>NAME
>VALUE
>NAME
>VALUE
<b>Dual In Line Package</b>
>NAME
>VALUE
<b>Wide Small Outline package</b> 300 mil
>VALUE
>NAME
<b>Leadless Chip Carrier</b><p> Ceramic Package
>NAME
>VALUE
>NAME
>NAME
>VALUE
>NAME
>VALUE
>NAME
>NAME
<b>PIN HEADER</b> - 2.54
>NAME
>VALUE
<b>PIN HEADER</b> - 2.54 90°
>NAME
>VALUE
<b>PIN HEADER</b> - 2
>NAME
>VALUE
<b>PIN HEADER</b> - 2.54 SMD
>NAME
>VALUE
<b>MicroMaTch 16 </b> 8-215464-6 / 1-215464-6<p>
Drawing Number C-215464<br>
DDEController.pdf
>NAME
>VALUE
<b>PIN HEADER</b> - 2.54 90°
>NAME
>VALUE
>NAME
>NAME
>VALUE
1
2
>NAME
>VALUE
>NAME
>VALUE
>NAME
GND
VCC
>NAME
>VALUE
>NAME
>VALUE
>NAME
>VALUE
>NAME
>VALUE
<b>PIN HEADER</b>
Octal <b>BUS TRANSCEIVER</b>, 3-state
Octal D type transparent <b>LATCH</b>, edge triggered
<b>PIN HEADER</b>
<b>Frames for Sheet and Layout</b>
Date:
>LAST_DATE_TIME
Sheet:
>SHEET
REV:
TITLE:
Document Number:
>DRAWING_NAME
<b>FRAME</b><p>
LETTER landscape
<b>Diodes</b><p>
Based on the following sources:
<ul>
<li>Motorola : www.onsemi.com
<li>Fairchild : www.fairchildsemi.com
<li>Philips : www.semiconductors.com
<li>Vishay : www.vishay.de
</ul>
<author>Created by librarian@cadsoft.de</author>
<b>Diode</b>
>NAME
>VALUE
>NAME
>VALUE
<b>SCHOTTKY BARRIER RECTIFIER</b><p>
Source: http://onsemi.com .. MBR0520LT1-D.pdf
Personal parts library of Micah Elizabeth Scott.
<b>CAPACITOR</b><p>
chip
>NAME
>VALUE
<b>CAPACITOR</b><p>
chip
>NAME
>VALUE
<b>CAPACITOR</b><p>
chip
>NAME
>VALUE
<b>CAPACITOR</b><p>
chip
>NAME
>VALUE
<b>CAPACITOR</b><p>
chip
>NAME
>VALUE
<b>CAPACITOR</b><p>
chip
>NAME
>VALUE
<b>CAPACITOR</b><p>
chip
>NAME
>VALUE
<b>CAPACITOR</b><p>
chip
>NAME
>VALUE
<b>CAPACITOR</b><p>
chip
>NAME
>VALUE
<b>CAPACITOR</b><p>
chip
>NAME
>VALUE
<b>CAPACITOR</b><p>
chip
>NAME
>VALUE
<b>CAPACITOR</b><p>
chip
>NAME
>VALUE
<b>CAPACITOR</b><p>
chip
>NAME
>VALUE
<b>CAPACITOR</b><p>
chip
>NAME
>VALUE
<b>CAPACITOR</b><p>
chip
>NAME
>VALUE
<b>CAPACITOR</b><p>
chip
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 mm, outline 2.4 x 4.4 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 mm, outline 2.5 x 5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 mm, outline 3 x 5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 mm, outline 4 x 5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 mm, outline 5 x 5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 mm, outline 6 x 5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 mm + 5 mm, outline 2.4 x 7 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 2.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 3.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 4.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 5.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 5 mm, outline 2.4 x 4.4 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 5 mm, outline 2.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 5 mm, outline 4.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 5 mm, outline 3 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 5 mm, outline 5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 5 mm, outline 5.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 5 mm, outline 7.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
Horizontal, grid 5 mm, outline 7.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 7.5 mm, outline 3.2 x 10.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 7.5 mm, outline 4.2 x 10.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 7.5 mm, outline 5.2 x 10.6 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 10.2 mm, outline 4.3 x 13.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 10.2 mm, outline 5.4 x 13.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 10.2 mm, outline 6.4 x 13.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 10.2 mm + 15.2 mm, outline 6.2 x 18.4 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 15 mm, outline 5.4 x 18.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 15 mm, outline 6.4 x 18.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 15 mm, outline 7.2 x 18.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 15 mm, outline 8.4 x 18.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 15 mm, outline 9.1 x 18.2 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 22.5 mm, outline 6.2 x 26.8 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 22.5 mm, outline 7.4 x 26.8 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 22.5 mm, outline 8.7 x 26.8 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 22.5 mm, outline 10.8 x 26.8 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 22.5 mm, outline 11.3 x 26.8 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 27.5 mm, outline 9.3 x 31.6 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 27.5 mm, outline 11.3 x 31.6 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 27.5 mm, outline 13.4 x 31.6 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 27.5 mm, outline 20.5 x 31.6 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 32.5 mm, outline 13.7 x 37.4 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 32.5 mm, outline 16.2 x 37.4 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 32.5 mm, outline 18.2 x 37.4 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 37.5 mm, outline 19.2 x 41.8 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 37.5 mm, outline 20.3 x 41.8 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 5 mm, outline 3.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 37.5 mm, outline 15.5 x 41.8 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 7.5 mm, outline 6.3 x 10.6 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 27.5 mm, outline 15.4 x 31.6 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 27.5 mm, outline 17.3 x 31.6 mm
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 0204 Reflow solder</b><p>
Metric Code Size 1005
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 0603 Reflow solder</b><p>
Metric Code Size 1608
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 0805 Reflow solder</b><p>
Metric Code Size 2012
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 1206 Reflow solder</b><p>
Metric Code Size 3216
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 1210 Reflow solder</b><p>
Metric Code Size 3225
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 1812 Reflow solder</b><p>
Metric Code Size 4532
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 1825 Reflow solder</b><p>
Metric Code Size 4564
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 2220 Reflow solder</b><p>
Metric Code Size 5650
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 2225 Reflow solder</b><p>
Metric Code Size 5664
>NAME
>VALUE
0805 (2012 Metric)
>NAME
>VALUE
>NAME
>VALUE
<B>CAPACITOR</B>, American symbol
<b>Resistors, Capacitors, Inductors</b><p>
Based on the previous libraries:
<ul>
<li>r.lbr
<li>cap.lbr
<li>cap-fe.lbr
<li>captant.lbr
<li>polcap.lbr
<li>ipc-smd.lbr
</ul>
All SMD packages are defined according to the IPC specifications and CECC<p>
<author>Created by librarian@cadsoft.de</author><p>
<p>
for Electrolyt Capacitors see also :<p>
www.bccomponents.com <p>
www.panasonic.com<p>
www.kemet.com<p>
http://www.secc.co.jp/pdf/os_e/2004/e_os_all.pdf <b>(SANYO)</b>
<p>
for trimmer refence see : <u>www.electrospec-inc.com/cross_references/trimpotcrossref.asp</u><p>
<table border=0 cellspacing=0 cellpadding=0 width="100%" cellpaddding=0>
<tr valign="top">
<! <td width="10"> </td>
<td width="90%">
<b><font color="#0000FF" size="4">TRIM-POT CROSS REFERENCE</font></b>
<P>
<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=2>
<TR>
<TD COLSPAN=8>
<FONT SIZE=3 FACE=ARIAL><B>RECTANGULAR MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">BOURNS</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">BI TECH</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">DALE-VISHAY</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">PHILIPS/MEPCO</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">MURATA</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">PANASONIC</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">SPECTROL</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">MILSPEC</FONT>
</B>
</TD><TD> </TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3 >
3005P<BR>
3006P<BR>
3006W<BR>
3006Y<BR>
3009P<BR>
3009W<BR>
3009Y<BR>
3057J<BR>
3057L<BR>
3057P<BR>
3057Y<BR>
3059J<BR>
3059L<BR>
3059P<BR>
3059Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
89P<BR>
89W<BR>
89X<BR>
89PH<BR>
76P<BR>
89XH<BR>
78SLT<BR>
78L ALT<BR>
56P ALT<BR>
78P ALT<BR>
T8S<BR>
78L<BR>
56P<BR>
78P<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
T18/784<BR>
783<BR>
781<BR>
-<BR>
-<BR>
-<BR>
2199<BR>
1697/1897<BR>
1680/1880<BR>
2187<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
8035EKP/CT20/RJ-20P<BR>
-<BR>
RJ-20X<BR>
-<BR>
-<BR>
-<BR>
1211L<BR>
8012EKQ ALT<BR>
8012EKR ALT<BR>
1211P<BR>
8012EKJ<BR>
8012EKL<BR>
8012EKQ<BR>
8012EKR<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
2101P<BR>
2101W<BR>
2101Y<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
2102L<BR>
2102S<BR>
2102Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
EVMCOG<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
43P<BR>
43W<BR>
43Y<BR>
-<BR>
-<BR>
-<BR>
-<BR>
40L<BR>
40P<BR>
40Y<BR>
70Y-T602<BR>
70L<BR>
70P<BR>
70Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
RT/RTR12<BR>
RT/RTR12<BR>
RT/RTR12<BR>
-<BR>
RJ/RJR12<BR>
RJ/RJR12<BR>
RJ/RJR12<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
<FONT SIZE=4 FACE=ARIAL><B>SQUARE MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3250L<BR>
3250P<BR>
3250W<BR>
3250X<BR>
3252P<BR>
3252W<BR>
3252X<BR>
3260P<BR>
3260W<BR>
3260X<BR>
3262P<BR>
3262W<BR>
3262X<BR>
3266P<BR>
3266W<BR>
3266X<BR>
3290H<BR>
3290P<BR>
3290W<BR>
3292P<BR>
3292W<BR>
3292X<BR>
3296P<BR>
3296W<BR>
3296X<BR>
3296Y<BR>
3296Z<BR>
3299P<BR>
3299W<BR>
3299X<BR>
3299Y<BR>
3299Z<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
66P ALT<BR>
66W ALT<BR>
66X ALT<BR>
66P ALT<BR>
66W ALT<BR>
66X ALT<BR>
-<BR>
64W ALT<BR>
-<BR>
64P ALT<BR>
64W ALT<BR>
64X ALT<BR>
64P<BR>
64W<BR>
64X<BR>
66X ALT<BR>
66P ALT<BR>
66W ALT<BR>
66P<BR>
66W<BR>
66X<BR>
67P<BR>
67W<BR>
67X<BR>
67Y<BR>
67Z<BR>
68P<BR>
68W<BR>
68X<BR>
67Y ALT<BR>
67Z ALT<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
5050<BR>
5091<BR>
5080<BR>
5087<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
T63YB<BR>
T63XB<BR>
-<BR>
-<BR>
-<BR>
5887<BR>
5891<BR>
5880<BR>
-<BR>
-<BR>
-<BR>
T93Z<BR>
T93YA<BR>
T93XA<BR>
T93YB<BR>
T93XB<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
8026EKP<BR>
8026EKW<BR>
8026EKM<BR>
8026EKP<BR>
8026EKB<BR>
8026EKM<BR>
1309X<BR>
1309P<BR>
1309W<BR>
8024EKP<BR>
8024EKW<BR>
8024EKN<BR>
RJ-9P/CT9P<BR>
RJ-9W<BR>
RJ-9X<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3103P<BR>
3103Y<BR>
3103Z<BR>
3103P<BR>
3103Y<BR>
3103Z<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3105P/3106P<BR>
3105W/3106W<BR>
3105X/3106X<BR>
3105Y/3106Y<BR>
3105Z/3105Z<BR>
3102P<BR>
3102W<BR>
3102X<BR>
3102Y<BR>
3102Z<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
EVMCBG<BR>
EVMCCG<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
55-1-X<BR>
55-4-X<BR>
55-3-X<BR>
55-2-X<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
50-2-X<BR>
50-4-X<BR>
50-3-X<BR>
-<BR>
-<BR>
-<BR>
64P<BR>
64W<BR>
64X<BR>
64Y<BR>
64Z<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
RT/RTR22<BR>
RT/RTR22<BR>
RT/RTR22<BR>
RT/RTR22<BR>
RJ/RJR22<BR>
RJ/RJR22<BR>
RJ/RJR22<BR>
RT/RTR26<BR>
RT/RTR26<BR>
RT/RTR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RT/RTR24<BR>
RT/RTR24<BR>
RT/RTR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
<FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3323P<BR>
3323S<BR>
3323W<BR>
3329H<BR>
3329P<BR>
3329W<BR>
3339H<BR>
3339P<BR>
3339W<BR>
3352E<BR>
3352H<BR>
3352K<BR>
3352P<BR>
3352T<BR>
3352V<BR>
3352W<BR>
3362H<BR>
3362M<BR>
3362P<BR>
3362R<BR>
3362S<BR>
3362U<BR>
3362W<BR>
3362X<BR>
3386B<BR>
3386C<BR>
3386F<BR>
3386H<BR>
3386K<BR>
3386M<BR>
3386P<BR>
3386S<BR>
3386W<BR>
3386X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
25P<BR>
25S<BR>
25RX<BR>
82P<BR>
82M<BR>
82PA<BR>
-<BR>
-<BR>
-<BR>
91E<BR>
91X<BR>
91T<BR>
91B<BR>
91A<BR>
91V<BR>
91W<BR>
25W<BR>
25V<BR>
25P<BR>
-<BR>
25S<BR>
25U<BR>
25RX<BR>
25X<BR>
72XW<BR>
72XL<BR>
72PM<BR>
72RX<BR>
-<BR>
72PX<BR>
72P<BR>
72RXW<BR>
72RXL<BR>
72X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
T7YB<BR>
T7YA<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
TXD<BR>
TYA<BR>
TYP<BR>
-<BR>
TYD<BR>
TX<BR>
-<BR>
150SX<BR>
100SX<BR>
102T<BR>
101S<BR>
190T<BR>
150TX<BR>
101<BR>
-<BR>
-<BR>
101SX<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ET6P<BR>
ET6S<BR>
ET6X<BR>
RJ-6W/8014EMW<BR>
RJ-6P/8014EMP<BR>
RJ-6X/8014EMX<BR>
TM7W<BR>
TM7P<BR>
TM7X<BR>
-<BR>
8017SMS<BR>
-<BR>
8017SMB<BR>
8017SMA<BR>
-<BR>
-<BR>
CT-6W<BR>
CT-6H<BR>
CT-6P<BR>
CT-6R<BR>
-<BR>
CT-6V<BR>
CT-6X<BR>
-<BR>
-<BR>
8038EKV<BR>
-<BR>
8038EKX<BR>
-<BR>
-<BR>
8038EKP<BR>
8038EKZ<BR>
8038EKW<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
3321H<BR>
3321P<BR>
3321N<BR>
1102H<BR>
1102P<BR>
1102T<BR>
RVA0911V304A<BR>
-<BR>
RVA0911H413A<BR>
RVG0707V100A<BR>
RVA0607V(H)306A<BR>
RVA1214H213A<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3104B<BR>
3104C<BR>
3104F<BR>
3104H<BR>
-<BR>
3104M<BR>
3104P<BR>
3104S<BR>
3104W<BR>
3104X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
EVMQ0G<BR>
EVMQIG<BR>
EVMQ3G<BR>
EVMS0G<BR>
EVMQ0G<BR>
EVMG0G<BR>
-<BR>
-<BR>
-<BR>
EVMK4GA00B<BR>
EVM30GA00B<BR>
EVMK0GA00B<BR>
EVM38GA00B<BR>
EVMB6<BR>
EVLQ0<BR>
-<BR>
EVMMSG<BR>
EVMMBG<BR>
EVMMAG<BR>
-<BR>
-<BR>
EVMMCS<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
EVMM1<BR>
-<BR>
-<BR>
EVMM0<BR>
-<BR>
-<BR>
EVMM3<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
62-3-1<BR>
62-1-2<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
67R<BR>
-<BR>
67P<BR>
-<BR>
-<BR>
-<BR>
-<BR>
67X<BR>
63V<BR>
63S<BR>
63M<BR>
-<BR>
-<BR>
63H<BR>
63P<BR>
-<BR>
-<BR>
63X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
RJ/RJR50<BR>
RJ/RJR50<BR>
RJ/RJR50<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
</TABLE>
<P> <P>
<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=3>
<TR>
<TD COLSPAN=7>
<FONT color="#0000FF" SIZE=4 FACE=ARIAL><B>SMD TRIM-POT CROSS REFERENCE</B></FONT>
<P>
<FONT SIZE=4 FACE=ARIAL><B>MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3224G<BR>
3224J<BR>
3224W<BR>
3269P<BR>
3269W<BR>
3269X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
44G<BR>
44J<BR>
44W<BR>
84P<BR>
84W<BR>
84X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
ST63Z<BR>
ST63Y<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
ST5P<BR>
ST5W<BR>
ST5X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=7>
</TD>
</TR>
<TR>
<TD COLSPAN=7>
<FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT>
</TD>
</TR>
<TR>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3314G<BR>
3314J<BR>
3364A/B<BR>
3364C/D<BR>
3364W/X<BR>
3313G<BR>
3313J<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
23B<BR>
23A<BR>
21X<BR>
21W<BR>
-<BR>
22B<BR>
22A<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ST5YL/ST53YL<BR>
ST5YJ/5T53YJ<BR>
ST-23A<BR>
ST-22B<BR>
ST-22<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ST-4B<BR>
ST-4A<BR>
-<BR>
-<BR>
-<BR>
ST-3B<BR>
ST-3A<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
EVM-6YS<BR>
EVM-1E<BR>
EVM-1G<BR>
EVM-1D<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
G4B<BR>
G4A<BR>
TR04-3S1<BR>
TRG04-2S1<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
DVR-43A<BR>
CVR-42C<BR>
CVR-42A/C<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
</TABLE>
<P>
<FONT SIZE=4 FACE=ARIAL><B>ALT = ALTERNATE</B></FONT>
<P>
<P>
</td>
</tr>
</table>
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
>NAME
>VALUE
<b>RESISTOR</b> wave soldering<p>
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b><p>
Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf
>NAME
>VALUE
<b>RESISTOR</b> wave soldering<p>
Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.10 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.25 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.12 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.10 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.25 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.25 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.12 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.25 W
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0204, grid 5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0204, grid 7.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 10 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 12 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 15mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 2.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 7.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0309, grid 10mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0309, grid 12.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0411, grid 12.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0411, grid 15 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0411, grid 3.81 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0414, grid 15 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0414, grid 5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0617, grid 17.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0617, grid 22.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0617, grid 5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0922, grid 22.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0613, grid 5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0613, grid 15 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0817, grid 22.5 mm
>NAME
>VALUE
0817
<b>RESISTOR</b><p>
type 0817, grid 6.35 mm
>NAME
>VALUE
0817
<b>RESISTOR</b><p>
type V234, grid 12.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type V235, grid 17.78 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type V526-0, grid 2.5 mm
>NAME
>VALUE
<b>Mini MELF 0102 Axial</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0922, grid 7.5 mm
>NAME
>VALUE
0922
<b>CECC Size RC2211</b> Reflow Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>CECC Size RC2211</b> Wave Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>CECC Size RC3715</b> Reflow Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>CECC Size RC3715</b> Wave Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>CECC Size RC6123</b> Reflow Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>CECC Size RC6123</b> Wave Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>RESISTOR</b><p>
type RDH, grid 15 mm
>NAME
>VALUE
RDH
<b>RESISTOR</b><p>
type 0204, grid 2.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0309, grid 2.5 mm
>NAME
>VALUE
<b>RESISTOR</b> chip<p>
Source: http://www.vishay.com/docs/20008/dcrcw.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RNC55<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RNC60<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR52<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR53<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR54<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR55<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR56<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Package 4527</b><p>
Source: http://www.vishay.com/docs/31059/wsrhigh.pdf
>NAME
>VALUE
<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf
>NAME
>VALUE
<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf
>NAME
>VALUE
<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf
>NAME
>VALUE
<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf
>NAME
>VALUE
<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf
>NAME
>VALUE
<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf
>NAME
>VALUE
<b>CRCW1218 Thick Film, Rectangular Chip Resistors</b><p>
Source: http://www.vishay.com .. dcrcw.pdf
>NAME
>VALUE
<b>Chip Monolithic Ceramic Capacitors</b> Medium Voltage High Capacitance for General Use<p>
Source: http://www.murata.com .. GRM43DR72E224KW01.pdf
>NAME
>VALUE
>NAME
>VALUE
<B>RESISTOR</B>, American symbol
<b>Single and Dual Gates Family, US symbols</b><p>
Little logic devices from Texas Instruments
<p>
<author>Created by evgeni@eniks.com</author>
Small Outline Transistor
>Name
>Value
>NAME
>VALUE
>NAME
GND
VCC
2-input <b>AND</b> gate
<h3>SparkFun Jumpers</h3>
In this library you'll find jumpers, or other semipermanent means of changing current paths. The least permanent form is the solder jumper. These can be changed by adding, removing, or moving solder. In cases that are less likely to be changed we have jumpers that are connected with traces. These can be cut with a razor, or reconnected with solder. Reference designator JP.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.
>NAME
>VALUE
>NAME
>VALUE
>NAME
>VALUE
>NAME
>VALUE
>NAME
>VALUE
>NAME
>VALUE
<h3>Normally closed trace jumper</h3>
<p>This jumper has a trace between two pads so it's normally closed (NC). Use a razor knife to open the connection. For best results follow the IPC guidelines for cutting traces:</p>
<ul>
<li>Cutout at least 0.063 mm (0.005 in).</li>
<li>Remove all loose material to clean up the cut area.</li>
<li>Seal the cut with an approved epoxy.</li>
</ul>
<p>Reapply solder to reclose the connection.</p>
<h3>Normally closed trace jumper (1 of 2 connections)</h3>
<p>This jumper has a trace between two pads so it's normally closed (NC). The other connection is normally open (NO). Use a razor knife to open the connection. For best results follow the IPC guidelines for cutting traces:</p>
<ul>
<li>Cutout at least 0.063 mm (0.005 in).</li>
<li>Remove all loose material to clean up the cut area.</li>
<li>Seal the cut with an approved epoxy.</li>
</ul>
<p>Reapply solder to reclose the connection, or to close the NO connection.</p>
SmartLED Shield for Teensy
Pixelmatix 2017 CC BY-SA
V4
Teensy
Matrix Panel: Data
VEXT
CLK
GND
DAT
Power
C5 is optional (not placed), it can be added to lessen the effects of
kickback when switching long strings of LEDs on and off on USB power
LEDs are powered externally, Teensy can be powered from VEXT or from USB
SN74AHCT1G08
LED_EN CONFIG OPTIONS
Default: R1 DNP, R2 47k, J1 short
LED_EN controls drivers, active high
Alt: R1 47k, R2 DNP, J1 open
LED_EN pin free, LEDs will always be driven
APA102 Buffers
SN74AHCT1G08
APA CONFIG OPTIONS
Default: JP2 connects 13 and APA_CLK
13 isn't available for Audio Board I2S0_RXD0
Alt: JP2 connects 14 to APA_CLK
13 available for I2S0_RXD0
(No Panel Driving)
All pins marked with X are unused by SmartLED Library
Since Version 6.2.2 text objects can contain more than one line,
which will not be processed correctly with this version.