>NAME DJ Jack 2.0mm PTH Right-Angle >NAME >VALUE DC 2.0/2.1 2.0/2.1mm DC Jack - SMT 4UConnector: 03267 Note: Small tRestrict polygon's were added to the ground pads to improve solderability when this part is used in combination with a ground pour. By default, Eagle will product four large bridges to the ground pour significantly increasing the heat distribution on the pads and preventing lead-free solder from reflowing in certain situations. For more details, see: http://www.microbuilder.eu/Blog/09-12-14/Reducing_Thermals_for_Large_Pads_in_Eagle.aspx + GND >NAME >VALUE >NAME >VALUE >NAME >VALUE SD & MMC >NAME >VALUE >NAME >VALUE Micro-SD / Transflash card holder with SPI pinout For the 3M # 2908-05WB-MG and/or 4UCON #19656 push-push type 2.0mm DC Barrel Jack DCJACK_2MM_PTH - Through Hole Jack (4UConnector: 05537) Low cost SMT crystals, no capacitors included http://www.ladyada.net/library/eagle Supply Symbols GND, VCC, 0V, +5V, -5V, etc. Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals. The pin name defined in the symbol is identical to the net which is to be wired automatically. In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic. <author>Created by librarian@cadsoft.de</author> >VALUE >VALUE >VALUE >VALUE SUPPLY SYMBOL SUPPLY SYMBOL SUPPLY SYMBOL SUPPLY SYMBOL Shrouded pin header, 0.1" pitch >NAME >NAME >VALUE Dual In Line Package >NAME >VALUE Wide Small Outline package 300 mil >VALUE >NAME Leadless Chip Carrier Ceramic Package >NAME >VALUE >NAME MOUNTING PAD 4.1 mm, round MOUNTING PAD 4.5 mm, round Diode >NAME >VALUE >NAME >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >NAME >VALUE >NAME GND VCC >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE 2x07 pin header Octal BUS TRANSCEIVER, 3-state MOUNTING PAD, round SCHOTTKY BARRIER RECTIFIER Source: http://onsemi.com .. MBR0520LT1-D.pdf Teensy 3.1 main microcontroller Personal parts library of Micah Elizabeth Scott. MHz range crystal unit Digi-Key: <a href="http://www.digikey.com/product-detail/en/TSX-3225%2016.0000MF18X-AC3/SER3636CT-ND/1825448">SER3636CT-ND</a> >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip, wave soldering >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip, wave soldering >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip, wave soldering >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip, wave soldering >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip, wave soldering >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip, wave soldering >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip, wave soldering >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip, wave soldering >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip, wave soldering >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip, wave soldering >NAME >VALUE RESISTOR MELF 0.10 W >NAME >VALUE RESISTOR MELF 0.25 W >NAME >VALUE RESISTOR MELF 0.12 W >NAME >VALUE RESISTOR MELF 0.10 W >NAME >VALUE RESISTOR MELF 0.25 W >NAME >VALUE RESISTOR MELF 0.25 W >NAME >VALUE RESISTOR MELF 0.12 W >NAME >VALUE RESISTOR MELF 0.25 W >NAME >VALUE RESISTOR type 0204, grid 5 mm >NAME >VALUE RESISTOR type 0204, grid 7.5 mm >NAME >VALUE RESISTOR type 0207, grid 10 mm >NAME >VALUE RESISTOR type 0207, grid 12 mm >NAME >VALUE RESISTOR type 0207, grid 15mm >NAME >VALUE RESISTOR type 0207, grid 2.5 mm >NAME >VALUE RESISTOR type 0207, grid 5 mm >NAME >VALUE RESISTOR type 0207, grid 7.5 mm >NAME >VALUE RESISTOR type 0309, grid 10mm >NAME >VALUE RESISTOR type 0309, grid 12.5 mm >NAME >VALUE RESISTOR type 0411, grid 12.5 mm >NAME >VALUE RESISTOR type 0411, grid 15 mm >NAME >VALUE RESISTOR type 0411, grid 3.81 mm >NAME >VALUE RESISTOR type 0414, grid 15 mm >NAME >VALUE RESISTOR type 0414, grid 5 mm >NAME >VALUE RESISTOR type 0617, grid 17.5 mm >NAME >VALUE RESISTOR type 0617, grid 22.5 mm >NAME >VALUE RESISTOR type 0617, grid 5 mm >NAME >VALUE RESISTOR type 0922, grid 22.5 mm >NAME >VALUE RESISTOR type 0613, grid 5 mm >NAME >VALUE RESISTOR type 0613, grid 15 mm >NAME >VALUE RESISTOR type 0817, grid 22.5 mm >NAME >VALUE 0817 RESISTOR type 0817, grid 6.35 mm >NAME >VALUE 0817 RESISTOR type V234, grid 12.5 mm >NAME >VALUE RESISTOR type V235, grid 17.78 mm >NAME >VALUE RESISTOR type V526-0, grid 2.5 mm >NAME >VALUE Mini MELF 0102 Axial >NAME >VALUE RESISTOR type 0922, grid 7.5 mm >NAME >VALUE 0922 CECC Size RC2211 Reflow Soldering source Beyschlag >NAME >VALUE CECC Size RC2211 Wave Soldering source Beyschlag >NAME >VALUE CECC Size RC3715 Reflow Soldering source Beyschlag >NAME >VALUE CECC Size RC3715 Wave Soldering source Beyschlag >NAME >VALUE CECC Size RC6123 Reflow Soldering source Beyschlag >NAME >VALUE CECC Size RC6123 Wave Soldering source Beyschlag >NAME >VALUE RESISTOR type RDH, grid 15 mm >NAME >VALUE RDH RESISTOR type 0204, grid 2.5 mm >NAME >VALUE RESISTOR type 0309, grid 2.5 mm >NAME >VALUE >NAME >VALUE >NAME >VALUE 0805 (2012 Metric) >NAME >VALUE CAPACITOR chip >NAME >VALUE CAPACITOR chip >NAME >VALUE CAPACITOR chip >NAME >VALUE CAPACITOR chip >NAME >VALUE CAPACITOR chip >NAME >VALUE CAPACITOR chip >NAME >VALUE CAPACITOR chip >NAME >VALUE CAPACITOR chip >NAME >VALUE CAPACITOR chip >NAME >VALUE CAPACITOR chip >NAME >VALUE CAPACITOR chip >NAME >VALUE CAPACITOR chip >NAME >VALUE CAPACITOR chip >NAME >VALUE CAPACITOR chip >NAME >VALUE CAPACITOR chip >NAME >VALUE CAPACITOR chip >NAME >VALUE CAPACITOR grid 2.5 mm, outline 2.4 x 4.4 mm >NAME >VALUE CAPACITOR grid 2.5 mm, outline 2.5 x 5 mm >NAME >VALUE CAPACITOR grid 2.5 mm, outline 3 x 5 mm >NAME >VALUE CAPACITOR grid 2.5 mm, outline 4 x 5 mm >NAME >VALUE CAPACITOR grid 2.5 mm, outline 5 x 5 mm >NAME >VALUE CAPACITOR grid 2.5 mm, outline 6 x 5 mm >NAME >VALUE CAPACITOR grid 2.5 mm + 5 mm, outline 2.4 x 7 mm >NAME >VALUE CAPACITOR grid 2.5 + 5 mm, outline 2.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 2.5 + 5 mm, outline 3.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 2.5 + 5 mm, outline 4.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 2.5 + 5 mm, outline 5.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 2.4 x 4.4 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 2.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 4.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 3 x 7.5 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 5 x 7.5 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 5.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 7.5 x 7.5 mm >NAME >VALUE CAPACITOR Horizontal, grid 5 mm, outline 7.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 7.5 mm, outline 3.2 x 10.3 mm >NAME >VALUE CAPACITOR grid 7.5 mm, outline 4.2 x 10.3 mm >NAME >VALUE CAPACITOR grid 7.5 mm, outline 5.2 x 10.6 mm >NAME >VALUE CAPACITOR grid 10.2 mm, outline 4.3 x 13.3 mm >NAME >VALUE CAPACITOR grid 10.2 mm, outline 5.4 x 13.3 mm >NAME >VALUE CAPACITOR grid 10.2 mm, outline 6.4 x 13.3 mm >NAME >VALUE CAPACITOR grid 10.2 mm + 15.2 mm, outline 6.2 x 18.4 mm >NAME >VALUE CAPACITOR grid 15 mm, outline 5.4 x 18.3 mm >NAME >VALUE CAPACITOR grid 15 mm, outline 6.4 x 18.3 mm >NAME >VALUE CAPACITOR grid 15 mm, outline 7.2 x 18.3 mm >NAME >VALUE CAPACITOR grid 15 mm, outline 8.4 x 18.3 mm >NAME >VALUE CAPACITOR grid 15 mm, outline 9.1 x 18.2 mm >NAME >VALUE CAPACITOR grid 22.5 mm, outline 6.2 x 26.8 mm >NAME >VALUE CAPACITOR grid 22.5 mm, outline 7.4 x 26.8 mm >NAME >VALUE CAPACITOR grid 22.5 mm, outline 8.7 x 26.8 mm >NAME >VALUE CAPACITOR grid 22.5 mm, outline 10.8 x 26.8 mm >NAME >VALUE CAPACITOR grid 22.5 mm, outline 11.3 x 26.8 mm >NAME >VALUE CAPACITOR grid 27.5 mm, outline 9.3 x 31.6 mm >NAME >VALUE CAPACITOR grid 27.5 mm, outline 11.3 x 31.6 mm >NAME >VALUE CAPACITOR grid 27.5 mm, outline 13.4 x 31.6 mm >NAME >VALUE CAPACITOR grid 27.5 mm, outline 20.5 x 31.6 mm >NAME >VALUE CAPACITOR grid 32.5 mm, outline 13.7 x 37.4 mm >NAME >VALUE CAPACITOR grid 32.5 mm, outline 16.2 x 37.4 mm >NAME >VALUE CAPACITOR grid 32.5 mm, outline 18.2 x 37.4 mm >NAME >VALUE CAPACITOR grid 37.5 mm, outline 19.2 x 41.8 mm >NAME >VALUE CAPACITOR grid 37.5 mm, outline 20.3 x 41.8 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 3.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 37.5 mm, outline 15.5 x 41.8 mm >NAME >VALUE CAPACITOR grid 7.5 mm, outline 6.3 x 10.6 mm >NAME >VALUE CAPACITOR grid 27.5 mm, outline 15.4 x 31.6 mm >NAME >VALUE CAPACITOR grid 27.5 mm, outline 17.3 x 31.6 mm >NAME >VALUE Ceramic Chip Capacitor KEMET 0204 Reflow solder Metric Code Size 1005 >NAME >VALUE Ceramic Chip Capacitor KEMET 0603 Reflow solder Metric Code Size 1608 >NAME >VALUE Ceramic Chip Capacitor KEMET 0805 Reflow solder Metric Code Size 2012 >NAME >VALUE Ceramic Chip Capacitor KEMET 1206 Reflow solder Metric Code Size 3216 >NAME >VALUE Ceramic Chip Capacitor KEMET 1210 Reflow solder Metric Code Size 3225 >NAME >VALUE Ceramic Chip Capacitor KEMET 1812 Reflow solder Metric Code Size 4532 >NAME >VALUE Ceramic Chip Capacitor KEMET 1825 Reflow solder Metric Code Size 4564 >NAME >VALUE Ceramic Chip Capacitor KEMET 2220 Reflow solder Metric Code Size 5650 >NAME >VALUE Ceramic Chip Capacitor KEMET 2225 Reflow solder Metric Code Size 5664 >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >Name >Value MHz RANGE CRYSTAL UNIT Source: Epson Toyocom RESISTOR, American symbol CAPACITOR, American symbol Test Pins/Pads Cream on SMD OFF. new: Attribute TP_SIGNAL_NAME <author>Created by librarian@cadsoft.de</author> TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME >NAME >TP_SIGNAL_NAME Test pad >NAME >VALUE >NAME >VALUE MINI54TAN Bootloader from PJRC.com, preprogrammed with Teensy 3.0 bootloader. https://www.pjrc.com/store/ic_mini54_tqfp.html <h3>SparkFun Electronics' preferred foot prints</h3> We've spent an enormous amount of time creating and checking these footprints and parts. If you enjoy using this library, please buy one of our products at www.sparkfun.com. Licensing: CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. OMRON SWITCH >NAME >NAME >Value >NAME >Value Sparkfun SKU# COM-08229 >NAME >VALUE >NAME >VALUE USB Series B Hole Mounted >NAME >VALUE >NAME >VALUE >NAME >VALUE USB <h3>USB+Shield</h3> USB connector with shield pins connectable >VALUE >NAME Dual In Line Package >NAME >VALUE >NAME MSGEQ7 7-band graphic equalizer <h2>microBuilder.eu Eagle Footprint Library</h2> Footprints for common components used in our projects and products. This is the same library that we use internally, and it is regularly updated. The newest version can always be found at www.microBuilder.eu. If you find this library useful, please feel free to purchase something from our online store. Please also note that all holes are optimised for metric drill bits! <h3>Obligatory Warning</h3> While it probably goes without saying, there are no guarantees that the footprints or schematic symbols in this library are flawless, and we make no promises of fitness for production, prototyping or any other purpose. These libraries are provided for information puposes only, and are used at your own discretion. While we make every effort to produce accurate footprints, and many of the items found in this library have be proven in production, we can't make any promises of suitability for a specific purpose. If you do find any errors, though, please feel free to contact us at www.microbuilder.eu to let us know about it so that we can update the library accordingly! <h3>License</h3> This work is placed in the public domain, and may be freely used for commercial and non-commercial work with the following conditions: THIS SOFTWARE IS PROVIDED ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 1mm FIDUCIAL MARKER round, layers 1 + 16 + 21 + 39 + 49 Fiducial Alignment Points Various fiducial points for machine vision alignment. Frames for Sheet and Layout Date: >LAST_DATE_TIME Sheet: >SHEET REV: TITLE: Document Number: >DRAWING_NAME FRAME B Size , 11 x 17 INCH, Landscape Keep Teensy Pin 33 floating manual short on brd manual short on brd SmartMatrix 2015 Pixelmatix CC-BY-SA "Hacker Port" and basic microcontroller circuit modified from original by scanlime Since Version 6.2.2 text objects can contain more than one line, which will not be processed correctly with this version.