ScStw/ESP32-HUB75-MatrixPanel-DMA
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Update esp32_i2s_parallel_v2.c

Browse source
This commit is contained in:
mrfaptastic 2021-02-19 09:44:27 +00:00
parent ffa82c06e1
commit 9a5bd38a14
1 changed files with 0 additions and 7 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

7
esp32_i2s_parallel_v2.c
View file

@ -208,10 +208,7 @@ esp_err_t i2s_parallel_driver_install(i2s_port_t port, i2s_parallel_config_t* co
dev->sample_rate_conf.tx_bits_mod = bus_width; dev->sample_rate_conf.tx_bits_mod = bus_width;
dev->sample_rate_conf.rx_bck_div_num = 1; dev->sample_rate_conf.rx_bck_div_num = 1;
dev->sample_rate_conf.tx_bck_div_num = 2; // datasheet says this must be 2 or greater (but 1 seems to work) dev->sample_rate_conf.tx_bck_div_num = 2; // datasheet says this must be 2 or greater (but 1 seems to work)
// note: because it's 1 here, not 2, we need to clkm_div_num = clkm_div_num * 2
// No support for fractional dividers (could probably be ported from official serial i2s driver though)
//
// It's confusing, but the max output the ESP32 can pump out when using I2S *parallel* output is 20Mhz. // It's confusing, but the max output the ESP32 can pump out when using I2S *parallel* output is 20Mhz.
// https://easyvolts.com/2018/08/14/esp32-40msps-oscilloscope-project-is-closed-and-here-is-why/ // https://easyvolts.com/2018/08/14/esp32-40msps-oscilloscope-project-is-closed-and-here-is-why/
// and https://github.com/espressif/esp-idf/issues/2251 // and https://github.com/espressif/esp-idf/issues/2251
@ -219,8 +216,6 @@ esp_err_t i2s_parallel_driver_install(i2s_port_t port, i2s_parallel_config_t* co
// 16bit parallel I2S @ 10Mhz = calculated clk_div_main (per line ~142) of 4 // 16bit parallel I2S @ 10Mhz = calculated clk_div_main (per line ~142) of 4
// 16bit parallel I2S @ 20Mhz = calculated clk_div_main (per line ~142) of 2 // 16bit parallel I2S @ 20Mhz = calculated clk_div_main (per line ~142) of 2
dev->clkm_conf.val=0; // Clear the clkm_conf struct dev->clkm_conf.val=0; // Clear the clkm_conf struct
dev->clkm_conf.clka_en=0; // Use the 160mhz system clock (PLL_D2_CLK) when '0' dev->clkm_conf.clka_en=0; // Use the 160mhz system clock (PLL_D2_CLK) when '0'
dev->clkm_conf.clkm_div_b=0; // Page 310 of Technical Reference Manual - Clock numerator dev->clkm_conf.clkm_div_b=0; // Page 310 of Technical Reference Manual - Clock numerator
@ -233,8 +228,6 @@ esp_err_t i2s_parallel_driver_install(i2s_port_t port, i2s_parallel_config_t* co
// Note: clkm_div_num must only be set here AFTER clkm_div_b, clkm_div_a, etc. Or weird things happen! // Note: clkm_div_num must only be set here AFTER clkm_div_b, clkm_div_a, etc. Or weird things happen!
dev->clkm_conf.clkm_div_num = clk_div_main; dev->clkm_conf.clkm_div_num = clk_div_main;
//dev->clkm_conf.clkm_div_num=80000000L/(conf->sample_rate + 1);
//printf("esp32_i2s_parallel_2.c > I2S clock divider is %d \n", clk_div_main*2); //printf("esp32_i2s_parallel_2.c > I2S clock divider is %d \n", clk_div_main*2);
// Some fifo conf I don't quite understand // Some fifo conf I don't quite understand