40 lines
1.8 KiB
Markdown
40 lines
1.8 KiB
Markdown
## Chained Panels example - Chaining individual LED matrix panels to make a larger panel ##
|
|
|
|
This is the PatternPlasma Demo adopted for use with multiple
|
|
displays arranged in a non standard order
|
|
|
|
### What is a non standard order? ###
|
|
|
|
When you connect multiple panels together, the library treats the
|
|
multiple panels as one big panel arranged horizontally. Arranging
|
|
the displays like this would be a standard order.
|
|
|
|
It creates a virtual screen that you draw to in the same way you would
|
|
the matrix, but it will look after mapping it back to the displays.
|
|
|
|
|
|
|
|
### Steps to Use ###
|
|
|
|
1) In ESP32-RGB64x32MatrixPanel-I2S-DMA.h:
|
|
|
|
- Set the MATRIX_HEIGHT to be the y resolution of the physical chained panels in a line (if the panels are 32 x 16, set it to be 16)
|
|
- Set the MATRIX_WIDTH to be the sum of the x resolution of all the physical chained panels (i.e. If you have 4 x (32px w x 16px h) panels, 32x4 = 128)
|
|
|
|
2) In the sketch:
|
|
|
|
- Set values for NUM_ROWS, NUM_COLS, PANEL_RES_X, PANEL_RES_Y. There are comments beside them
|
|
explaining what they are in more detail.
|
|
- Other than where the matrix is defined and matrix.begin in the setup, you should now be using the virtual display
|
|
for everything (drawing pixels, writing text etc). You can do a find and replace of all calls if it's an existing sketch
|
|
(just make sure you don't replace the definition and the matrix.begin)
|
|
- If the sketch makes use of MATRIX_HEIGHT or MATRIX_WIDTH, these will need to be replaced with the width and height
|
|
of your virtual screen. Either make new defines and use that, or you can use virtualDisp.width() or .height()
|
|
|
|
#### Contributor ####
|
|
Written by Brian Lough
|
|
YouTube: https://www.youtube.com/brianlough
|
|
|
|
Tindie: https://www.tindie.com/stores/brianlough/
|
|
|
|
Twitter: https://twitter.com/witnessmenow
|