ESP32-HUB75-MatrixPanel-DMA/examples/ChainedPanels

Chained Panels example - Chaining individual LED matrix panels to make a larger panel

This is the PatternPlasma Demo adopted for use with multiple displays arranged in a non standard order

What is a non standard order?

When you connect multiple panels together, the library treats the multiple panels as one big panel arranged horizontally. Arranging the displays like this would be a standard order.

[ 4 ][ 3 ][ 2 ][ 1 ] (ESP32 is connected to 1)

If you wanted to arrange the displays vertically, or in rows and columns this example might be able to help.

[ 4 ][ 3 ] [ 2 ][ 1 ]

It creates a virtual screen that you draw to in the same way you would the matrix, but it will look after mapping it back to the displays.

Steps to Use

1. In ESP32-RGB64x32MatrixPanel-I2S-DMA.h:

• Set the MATRIX_HEIGHT to be the y resolution of the physical chained panels in a line (if the panels are 32 x 16, set it to be 16)
• Set the MATRIX_WIDTH to be the sum of the x resolution of all the physical chained panels (i.e. If you have 4 x (32px w x 16px h) panels, 32x4 = 128)

2. In the sketch:

• Set values for NUM_ROWS, NUM_COLS, PANEL_RES_X, PANEL_RES_Y. There are comments beside them explaining what they are in more detail.
• Other than where the matrix is defined and matrix.begin in the setup, you should now be using the virtual display for everything (drawing pixels, writing text etc). You can do a find and replace of all calls if it's an existing sketch (just make sure you don't replace the definition and the matrix.begin)
• If the sketch makes use of MATRIX_HEIGHT or MATRIX_WIDTH, these will need to be replaced with the width and height of your virtual screen. Either make new defines and use that, or you can use virtualDisp.width() or .height()

Contributor

Written by Brian Lough YouTube: https://www.youtube.com/brianlough Tindie: https://www.tindie.com/stores/brianlough/ Twitter: https://twitter.com/witnessmenow

Parts: ESP32 D1 Mini * - https://s.click.aliexpress.com/e/_dSi824B ESP32 I2S Matrix Shield (From my Tindie) = https://www.tindie.com/products/brianlough/esp32-i2s-matrix-shield/

• • = Affilate

If you find what I do useful and would like to support me, please consider becoming a sponsor on Github https://github.com/sponsors/witnessmenow/