Add controller scan filter options and refactor nimconfig.h

* Add the option to change the scan filter mode through NimBLEDevice::setScanFilterMode

* Add the option to change the scan filter cache size through NimBLEDevice::setScanDuplicateCacheSize

* Refactor nimconfig to make it for doxygen use only.
This commit is contained in:
h2zero 2021-01-31 21:15:31 -07:00
parent 82524c80e3
commit af24cd7720
4 changed files with 185 additions and 218 deletions

View file

@ -62,6 +62,8 @@ std::list <NimBLEClient*> NimBLEDevice::m_cList;
std::list <NimBLEAddress> NimBLEDevice::m_ignoreList;
NimBLESecurityCallbacks* NimBLEDevice::m_securityCallbacks = nullptr;
uint8_t NimBLEDevice::m_own_addr_type = BLE_OWN_ADDR_PUBLIC;
uint16_t NimBLEDevice::m_scanDuplicateSize = CONFIG_BTDM_SCAN_DUPL_CACHE_SIZE;
uint8_t NimBLEDevice::m_scanFilterMode = CONFIG_BTDM_SCAN_DUPL_TYPE;
/**
@ -400,6 +402,53 @@ void NimBLEDevice::stopAdvertising() {
}
/**
* @brief Set the duplicate filter mode for filtering scanned devices.
* @param {in] cacheSize The number of advertisements filtered before the cache is reset.\n
* Range is 10-1000, a larger value will reduce how often the same devices are reported.
* @details Must only be called before calling NimBLEDevice::init.
*/
/*STATIC*/
void NimBLEDevice::setScanDuplicateCacheSize(uint16_t cacheSize) {
if(initialized) {
NIMBLE_LOGE(LOG_TAG, "Cannot change scan cache size while initialized");
return;
} else if(cacheSize > 1000 || cacheSize <10) {
NIMBLE_LOGE(LOG_TAG, "Invalid scan cache size; min=10 max=1000");
return;
}
m_scanDuplicateSize = cacheSize;
}
/**
* @brief Set the duplicate filter mode for filtering scanned devices.
* @param {in] mode One of three possible options:
* * CONFIG_BTDM_SCAN_DUPL_TYPE_DEVICE (0) (default)\n
Filter by device address only, advertisements from the same address will be reported only once.
* * CONFIG_BTDM_SCAN_DUPL_TYPE_DATA (1)\n
Filter by data only, advertisements with the same data will only be reported once,\n
even from different addresses.
* * CONFIG_BTDM_SCAN_DUPL_TYPE_DATA_DEVICE (2)\n
Filter by address and data, advertisements from the same address will be reported only once,\n
except if the data in the advertisement has changed, then it will be reported again.
* @details Must only be called before calling NimBLEDevice::init.
*/
/*STATIC*/
void NimBLEDevice::setScanFilterMode(uint8_t mode) {
if(initialized) {
NIMBLE_LOGE(LOG_TAG, "Cannot change scan duplicate type while initialized");
return;
} else if(mode > 2) {
NIMBLE_LOGE(LOG_TAG, "Invalid scan duplicate type");
return;
}
m_scanFilterMode = mode;
}
/**
* @brief Host reset, we pass the message so we don't make calls until resynced.
* @param [in] reason The reason code for the reset.
@ -499,8 +548,17 @@ void NimBLEDevice::stopAdvertising() {
ESP_ERROR_CHECK(errRc);
ESP_ERROR_CHECK(esp_nimble_hci_and_controller_init());
esp_bt_controller_mem_release(ESP_BT_MODE_CLASSIC_BT);
esp_bt_controller_config_t bt_cfg = BT_CONTROLLER_INIT_CONFIG_DEFAULT();
bt_cfg.mode = ESP_BT_MODE_BLE;
bt_cfg.ble_max_conn = CONFIG_BT_NIMBLE_MAX_CONNECTIONS;
bt_cfg.normal_adv_size = m_scanDuplicateSize;
bt_cfg.scan_duplicate_type = m_scanFilterMode;
ESP_ERROR_CHECK(esp_bt_controller_init(&bt_cfg));
ESP_ERROR_CHECK(esp_bt_controller_enable(ESP_BT_MODE_BLE));
ESP_ERROR_CHECK(esp_nimble_hci_init());
nimble_port_init();
// Setup callbacks for host events

View file

@ -123,6 +123,8 @@ public:
static bool isIgnored(const NimBLEAddress &address);
static void addIgnored(const NimBLEAddress &address);
static void removeIgnored(const NimBLEAddress &address);
static void setScanDuplicateCacheSize(uint16_t cacheSize);
static void setScanFilterMode(uint8_t type);
#if defined(CONFIG_BT_NIMBLE_ROLE_BROADCASTER)
static NimBLEAdvertising* getAdvertising();
@ -184,6 +186,8 @@ private:
static ble_gap_event_listener m_listener;
static gap_event_handler m_customGapHandler;
static uint8_t m_own_addr_type;
static uint16_t m_scanDuplicateSize;
static uint8_t m_scanFilterMode;
};

View file

@ -1,241 +1,93 @@
/** @file
*
/** @file
*
* IGNORE THIS FILE IF USING ESP-IDF, USE MENUCONFIG TO SET NIMBLE OPTIONS.
*
* The config options here are for Arduino use only.
* The config options here are for doxygen documentation only.
*/
#pragma once
#include "sdkconfig.h"
/*
* For ESP-IDF compatibility
* Some versions of ESP-IDF used the config name format "CONFIG_NIMBLE_".
* This converts them to "CONFIG_BT_NIMBLE_" format used in the latest IDF.
*/
/* Detect if using ESP-IDF or Arduino (Arduino won't have these defines in sdkconfig)
*
* Note: We do not use #ifdef CONFIG_BT_NIMBLE_ENABLED since we cannot enable NimBLE when using
* Arduino as a component and the esp-nimble-compnent, so we check if other config options are defined.
* We also need to use a config parameter that must be present and not likely defined in the command line.
*/
#if defined(CONFIG_BT_NIMBLE_GAP_DEVICE_NAME_MAX_LEN) || defined(CONFIG_NIMBLE_GAP_DEVICE_NAME_MAX_LEN)
#if defined(CONFIG_NIMBLE_ENABLED) && !defined(CONFIG_BT_NIMBLE_ENABLED)
#define CONFIG_BT_NIMBLE_ENABLED
#endif
#if defined(CONFIG_NIMBLE_ROLE_OBSERVER) && !defined(CONFIG_BT_NIMBLE_ROLE_OBSERVER)
#define CONFIG_BT_NIMBLE_ROLE_OBSERVER
#endif
#if defined(CONFIG_NIMBLE_ROLE_BROADCASTER) && !defined(CONFIG_BT_NIMBLE_ROLE_BROADCASTER)
#define CONFIG_BT_NIMBLE_ROLE_BROADCASTER
#endif
#if defined(CONFIG_NIMBLE_ROLE_CENTRAL) && !defined(CONFIG_BT_NIMBLE_ROLE_CENTRAL)
#define CONFIG_BT_NIMBLE_ROLE_CENTRAL
#endif
#if defined(CONFIG_NIMBLE_ROLE_PERIPHERAL) && !defined(CONFIG_BT_NIMBLE_ROLE_PERIPHERAL)
#define CONFIG_BT_NIMBLE_ROLE_PERIPHERAL
#endif
#if defined(CONFIG_NIMBLE_DEBUG) && !defined(CONFIG_BT_NIMBLE_DEBUG)
#define CONFIG_BT_NIMBLE_DEBUG
#endif
#else // Using Arduino
/***********************************************
* Arduino config options start here
**********************************************/
/** @brief Comment out if not using NimBLE Client functions \n
* Reduces flash size by approx. 7kB.
*/
#ifndef CONFIG_BT_NIMBLE_ROLE_CENTRAL_DISABLED
#define CONFIG_BT_NIMBLE_ROLE_CENTRAL
#endif
/** @brief Comment out if not using NimBLE Scan functions \n
* Reduces flash size by approx. 26kB.
*/
#ifndef CONFIG_BT_NIMBLE_ROLE_OBSERVER_DISABLED
#define CONFIG_BT_NIMBLE_ROLE_OBSERVER
#endif
/** @brief Comment out if not using NimBLE Server functions \n
* Reduces flash size by approx. 16kB.
*/
#ifndef CONFIG_BT_NIMBLE_ROLE_PERIPHERAL_DISABLED
#define CONFIG_BT_NIMBLE_ROLE_PERIPHERAL
#endif
/** @brief Comment out if not using NimBLE Advertising functions \n
* Reduces flash size by approx. 5kB.
*/
#ifndef CONFIG_BT_NIMBLE_ROLE_BROADCASTER_DISABLED
#define CONFIG_BT_NIMBLE_ROLE_BROADCASTER
#endif
/* Uncomment to see debug log messages from the NimBLE host
* Uses approx. 32kB of flash memory.
*/
// #define CONFIG_BT_NIMBLE_DEBUG
/* Uncomment to see NimBLE host return codes as text debug log messages.
* Uses approx. 7kB of flash memory.
*/
// #define CONFIG_NIMBLE_CPP_ENABLE_RETURN_CODE_TEXT
/* Uncomment to see GAP event codes as text in debug log messages.
* Uses approx. 1kB of flash memory.
*/
// #define CONFIG_NIMBLE_CPP_ENABLE_GAP_EVENT_CODE_TEXT
/* Uncomment to see advertisment types as text while scanning in debug log messages.
* Uses approx. 250 bytes of flash memory.
*/
// #define CONFIG_NIMBLE_CPP_ENABLE_ADVERTISMENT_TYPE_TEXT
/** @brief Sets the core NimBLE host runs on */
#ifndef CONFIG_BT_NIMBLE_PINNED_TO_CORE
#define CONFIG_BT_NIMBLE_PINNED_TO_CORE 0
#endif
/** @brief Sets the stack size for the NimBLE host task */
#ifndef CONFIG_BT_NIMBLE_TASK_STACK_SIZE
#define CONFIG_BT_NIMBLE_TASK_STACK_SIZE 4096
#endif
/**
* @brief Sets the memory pool where NimBLE will be loaded
* @details By default NimBLE is loaded in internal ram.\n
* To use external PSRAM you must change this to `#define CONFIG_BT_NIMBLE_MEM_ALLOC_MODE_EXTERNAL 1`
*/
#ifndef CONFIG_BT_NIMBLE_MEM_ALLOC_MODE_EXTERNAL
#define CONFIG_BT_NIMBLE_MEM_ALLOC_MODE_INTERNAL 1
#endif
/** @brief Sets the number of simultaneous connections (esp controller max is 9) */
#ifndef CONFIG_BT_NIMBLE_MAX_CONNECTIONS
#define CONFIG_BT_NIMBLE_MAX_CONNECTIONS 3
#endif
/** @brief Sets the number of devices allowed to store/bond with */
#ifndef CONFIG_BT_NIMBLE_MAX_BONDS
#define CONFIG_BT_NIMBLE_MAX_BONDS 3
#endif
/** @brief Sets the maximum number of CCCD subscriptions to store */
#ifndef CONFIG_BT_NIMBLE_MAX_CCCDS
#define CONFIG_BT_NIMBLE_MAX_CCCDS 8
#endif
/** @brief Default device name */
#ifndef CONFIG_BT_NIMBLE_SVC_GAP_DEVICE_NAME
#define CONFIG_BT_NIMBLE_SVC_GAP_DEVICE_NAME "nimble"
#endif
/** @brief Set if CCCD's and bond data should be stored in NVS */
#define CONFIG_BT_NIMBLE_NVS_PERSIST 1
/** @brief Allow legacy paring */
#define CONFIG_BT_NIMBLE_SM_LEGACY 1
/** @brief Allow BLE secure connections */
#define CONFIG_BT_NIMBLE_SM_SC 1
/** @brief Max device name length (bytes) */
#define CONFIG_BT_NIMBLE_GAP_DEVICE_NAME_MAX_LEN 31
/** @brief Default MTU size */
#define CONFIG_BT_NIMBLE_ATT_PREFERRED_MTU 256
/** @brief Default GAP appearance */
#define CONFIG_BT_NIMBLE_SVC_GAP_APPEARANCE 0x0
/** @brief ACL Buffer count */
#define CONFIG_BT_NIMBLE_ACL_BUF_COUNT 12
/** @brief ACL Buffer size */
#define CONFIG_BT_NIMBLE_ACL_BUF_SIZE 255
/** @brief HCI Event Buffer size */
#define CONFIG_BT_NIMBLE_HCI_EVT_BUF_SIZE 70
/** @brief Number of high priority HCI event buffers */
#define CONFIG_BT_NIMBLE_HCI_EVT_HI_BUF_COUNT 30
/** @brief Number of low priority HCI event buffers */
#define CONFIG_BT_NIMBLE_HCI_EVT_LO_BUF_COUNT 8
/**
* @brief Sets the number of MSYS buffers available.
* @details MSYS is a system level mbuf registry. For prepare write & prepare \n
* responses MBUFs are allocated out of msys_1 pool. This may need to be increased if\n
* you are sending large blocks of data with a low MTU. E.g: 512 bytes with 23 MTU will fail.
*/
#define CONFIG_BT_NIMBLE_MSYS1_BLOCK_COUNT 12
/** @brief Random address refresh time in seconds */
#define CONFIG_BT_NIMBLE_RPA_TIMEOUT 900
/** @brief Maximum number of connection oriented channels */
#define CONFIG_BT_NIMBLE_L2CAP_COC_MAX_NUM 0
/* These should not be altered */
#define CONFIG_BT_NIMBLE_HS_FLOW_CTRL 1
#define CONFIG_BT_NIMBLE_HS_FLOW_CTRL_ITVL 1000
#define CONFIG_BT_NIMBLE_HS_FLOW_CTRL_THRESH 2
#define CONFIG_BT_NIMBLE_HS_FLOW_CTRL_TX_ON_DISCONNECT 1
#ifndef CONFIG_BT_ENABLED
#define CONFIG_BT_ENABLED
#endif
#define CONFIG_BTDM_CONTROLLER_MODE_BLE_ONLY
#endif // #if defined(CONFIG_BT_NIMBLE_TASK_STACK_SIZE) || defined(CONFIG_NIMBLE_TASK_STACK_SIZE)
/**********************************
End Arduino config
**********************************/
/* Cannot use client without scan */
#if defined(CONFIG_BT_NIMBLE_ROLE_CENTRAL) && !defined(CONFIG_BT_NIMBLE_ROLE_OBSERVER)
#define CONFIG_BT_NIMBLE_ROLE_OBSERVER
#endif
/* Cannot use server without advertise */
#if defined(CONFIG_BT_NIMBLE_ROLE_PERIPHERAL) && !defined(CONFIG_BT_NIMBLE_ROLE_BROADCASTER)
#define CONFIG_BT_NIMBLE_ROLE_BROADCASTER
#endif
#include "nimconfig_rename.h"
#ifdef _DOXYGEN_
/** @brief Uncomment to see debug log messages from the NimBLE host \n
/** @brief Un-comment to change the number of simultaneous connections (esp controller max is 9) */
#define CONFIG_BT_NIMBLE_MAX_CONNECTIONS 3
/** @brief Un-comment to change the default MTU size */
#define CONFIG_BT_NIMBLE_ATT_PREFERRED_MTU 255
/** @brief Un-comment to change default device name */
#define CONFIG_BT_NIMBLE_SVC_GAP_DEVICE_NAME "nimble"
/** @brief Un-comment to see debug log messages from the NimBLE host
* Uses approx. 32kB of flash memory.
*/
#define CONFIG_BT_NIMBLE_DEBUG
/** @brief Uncomment to see NimBLE host return codes as text debug log messages. \n
/** @brief Un-comment to see NimBLE host return codes as text debug log messages.
* Uses approx. 7kB of flash memory.
*/
#define CONFIG_NIMBLE_CPP_ENABLE_RETURN_CODE_TEXT
/** @brief Uncomment to see GAP event codes as text in debug log messages. \n
/** @brief Un-comment to see GAP event codes as text in debug log messages.
* Uses approx. 1kB of flash memory.
*/
#define CONFIG_NIMBLE_CPP_ENABLE_GAP_EVENT_CODE_TEXT
/** @brief Uncomment to see advertisment types as text while scanning in debug log messages. \n
/** @brief Un-comment to see advertisment types as text while scanning in debug log messages.
* Uses approx. 250 bytes of flash memory.
*/
#define CONFIG_NIMBLE_CPP_ENABLE_ADVERTISMENT_TYPE_TEXT
/** @brief Un-comment to change the default GAP appearance */
#define CONFIG_BT_NIMBLE_SVC_GAP_APPEARANCE 0x0
/** @brief Un-comment if not using NimBLE Client functions \n
* Reduces flash size by approx. 7kB.
*/
#define CONFIG_BT_NIMBLE_ROLE_CENTRAL_DISABLED
/** @brief Un-comment if not using NimBLE Scan functions \n
* Reduces flash size by approx. 26kB.
*/
#define CONFIG_BT_NIMBLE_ROLE_OBSERVER_DISABLED
/** @brief Un-comment if not using NimBLE Server functions \n
* Reduces flash size by approx. 16kB.
*/
#define CONFIG_BT_NIMBLE_ROLE_PERIPHERAL_DISABLED
/** @brief Un-comment if not using NimBLE Advertising functions \n
* Reduces flash size by approx. 5kB.
*/
#define CONFIG_BT_NIMBLE_ROLE_BROADCASTER_DISABLED
/** @brief Un-comment to change the number of devices allowed to store/bond with */
#define CONFIG_BT_NIMBLE_MAX_BONDS 3
/** @brief Un-comment to change the maximum number of CCCD subscriptions to store */
#define CONFIG_BT_NIMBLE_MAX_CCCDS 8
/** @brief Un-comment to change the random address refresh time (in seconds) */
#define CONFIG_BT_NIMBLE_RPA_TIMEOUT 900
/**
* @brief Un-comment to change the number of MSYS buffers available.
* @details MSYS is a system level mbuf registry. For prepare write & prepare \n
* responses MBUFs are allocated out of msys_1 pool. This may need to be increased if\n
* you are sending large blocks of data with a low MTU. E.g: 512 bytes with 23 MTU will fail.
*/
#define CONFIG_BT_NIMBLE_MSYS1_BLOCK_COUNT 12
/** @brief Un-comment to use external PSRAM for the NimBLE host */
#define CONFIG_BT_NIMBLE_MEM_ALLOC_MODE_EXTERNAL 1
/** @brief Un-comment to change the core NimBLE host runs on */
#define CONFIG_BT_NIMBLE_PINNED_TO_CORE 0
/** @brief Un-comment to change the stack size for the NimBLE host task */
#define CONFIG_BT_NIMBLE_TASK_STACK_SIZE 4096
#endif // _DOXYGEN_

53
src/nimconfig_rename.h Normal file
View file

@ -0,0 +1,53 @@
/*
* For ESP-IDF compatibility
* Some versions of ESP-IDF used the config name format "CONFIG_NIMBLE_".
* This converts them to "CONFIG_BT_NIMBLE_" format used in the latest IDF.
*/
#if defined(CONFIG_NIMBLE_ENABLED) && !defined(CONFIG_BT_NIMBLE_ENABLED)
#define CONFIG_BT_NIMBLE_ENABLED
#endif
#if defined(CONFIG_NIMBLE_ROLE_OBSERVER) && !defined(CONFIG_BT_NIMBLE_ROLE_OBSERVER)
#define CONFIG_BT_NIMBLE_ROLE_OBSERVER
#endif
#if defined(CONFIG_NIMBLE_ROLE_BROADCASTER) && !defined(CONFIG_BT_NIMBLE_ROLE_BROADCASTER)
#define CONFIG_BT_NIMBLE_ROLE_BROADCASTER
#endif
#if defined(CONFIG_NIMBLE_ROLE_CENTRAL) && !defined(CONFIG_BT_NIMBLE_ROLE_CENTRAL)
#define CONFIG_BT_NIMBLE_ROLE_CENTRAL
#endif
#if defined(CONFIG_NIMBLE_ROLE_PERIPHERAL) && !defined(CONFIG_BT_NIMBLE_ROLE_PERIPHERAL)
#define CONFIG_BT_NIMBLE_ROLE_PERIPHERAL
#endif
#if defined(CONFIG_NIMBLE_DEBUG) && !defined(CONFIG_BT_NIMBLE_DEBUG)
#define CONFIG_BT_NIMBLE_DEBUG
#endif
#if defined(CONFIG_SCAN_DUPLICATE_BY_DEVICE_ADDR) && !defined(CONFIG_BTDM_SCAN_DUPL_TYPE_DEVICE)
#define CONFIG_BTDM_SCAN_DUPL_TYPE_DEVICE CONFIG_SCAN_DUPLICATE_BY_DEVICE_ADDR
#endif
#if defined(CONFIG_SCAN_DUPLICATE_BY_ADV_DATA ) && !defined(CONFIG_BTDM_SCAN_DUPL_TYPE_DATA)
#define CONFIG_BTDM_SCAN_DUPL_TYPE_DATA CONFIG_SCAN_DUPLICATE_BY_ADV_DATA
#endif
#if defined(CONFIG_SCAN_DUPLICATE_BY_ADV_DATA_AND_DEVICE_ADDR) && !defined(CONFIG_BTDM_SCAN_DUPL_TYPE_DATA_DEVICE)
#define CONFIG_BTDM_SCAN_DUPL_TYPE_DATA_DEVICE CONFIG_SCAN_DUPLICATE_BY_ADV_DATA_AND_DEVICE_ADDR
#endif
#if defined(CONFIG_SCAN_DUPLICATE_TYPE) && !defined(CONFIG_BTDM_SCAN_DUPL_TYPE)
#define CONFIG_BTDM_SCAN_DUPL_TYPE CONFIG_SCAN_DUPLICATE_TYPE
#endif
#if defined(CONFIG_DUPLICATE_SCAN_CACHE_SIZE) && !defined(CONFIG_BTDM_SCAN_DUPL_CACHE_SIZE)
#define CONFIG_BTDM_SCAN_DUPL_CACHE_SIZE CONFIG_DUPLICATE_SCAN_CACHE_SIZE
#endif
#if defined(CONFIG_NIMBLE_MAX_CONNECTIONS ) && !defined(CONFIG_BT_NIMBLE_MAX_CONNECTIONS)
#define CONFIG_BT_NIMBLE_MAX_CONNECTIONS CONFIG_NIMBLE_MAX_CONNECTIONS
#endif