Instead of incrementing the notificatin value via `xTaskNotifyGive` this will now set a specific bit in the task notification value
which will be tested before blocking a task. This will prevent a task from blocking indefinitely if the event that calls `taskRelease`
occurs before entering the blocked state.
* Adds a config setting for the bit to set in the task notification value.
* Adds parameters `asyncConnect` and `exchangeMTU` to `NimBLEClient::connect`, default values work as the original connect method.
* * `asyncConnect`; if true, will send the connect command and return immediately with a true value for successfully sending the command, else false.
* * `exchangeMTU`; if true will send the exchange MTU command upon connection, otherwise not and the application can choose to do this later via the `exchangeMTU` method.
* Adds `onMTUChange` callback to `NimBLEClientCallbacks`
* Add `NimBLEDevice::getConnectedClients()` which returns a vector of pointers to the currently connected client instances.
* Calling `NimBLEClient::connect` will no longer cancel already in progress connections.
When attempting to connect and the scanner is running `NimBLEScan::stop` is called to stop it
which then calls the `onScanEnded` callback. If the app then starts the scan again in this
callback an endless loop will be created.
This change prevents the endless loop by setting a flag in `NimBLEDevice` that is checked before
starting a scan while a client is trying to connect.
* Adds `NimBLEDevice::setConnectionInProgress` and `NimBLEDevice::isConnectionInProgress` functions.
* General code cleanup and rename variables to use a consistent style.
* Removes the disconnect timer and will use the BLE_GAP_EVENT_TERM_FAILURE event to handle failed disconnects.
* `NimBLEClient::getConnId` has been renamed to `getConnHandle` to be consistent with bluetooth terminology.
* `NimBLEClient::disconnect` now returns a `bool = true on success` instead of an int to be consistent with the rest of the library.
* `NimBLEClient::setPeerAddress` now returns a bool, true on success.
* `NimBLEClientCallbacks::onConfirmPIN` renamed to `NimBLEClientCallbacks::onConfirmPasskey` to be consistent with bluetooth terminology.
* `NimBLEClient::setDataLen` now returns bool, true if successful.
* `NimBLEClient::updateConnParams` now returns bool, true if successful.
* `NimBLEClient::getServices` now returns a const reference to std::vector<NimBLERemoteService*> instead of a pointer to the internal vector.
* General code cleanup
* `NimBLEDevice::getInitialized` renamed to `NimBLEDevice::isInitialized`.
* `NimBLEDevice::setPower` no longer takes the `esp_power_level_t` and `esp_ble_power_type_t`, instead only an integer value in dbm units is accepted.
* `NimBLEDevice::setPower` now returns a bool value, true = success.
* `NimBLEDevice::setMTU` now returns a bool value, true = success.
* `NimBLEDevice::injectConfirmPIN` renamed to `NimBLEDevice::injectConfirmPasskey` to use Bluetooth naming.
* Fixes crash if `NimBLEDevice::deinit` is called when the stack has not been initialized.
* Reverts 73f0277 as it would cause a crash when the NimBLEServer instance has a connection.
* `NimBLEDevice::getAddress` will now return the address currently in use.
* `NimBLEDevice::init` now returns a bool with `true` indicating success.
* `NimBLEDevice::deinit` now returns a bool with `true` inidicating success.
* `NimBLEDevice::setDeviceName` now returns a bool with `true` indicating success.
* `NimBLEDevice::setCustomGapHandler` now returns a bool with `true` indicating success.
* `NimBLEDevice::setOwnAddrType` now returns a bool with `true` indicating success.
* `NimBLEDevice::setOwnAddrType` will now correctly apply the provided address type for all devices.
* `NimBLEDevice::setOwnAddrType` no longer takes a `bool nrpa` parameter.
* fix: #200 Use `data()`/`size()` instead of `c_str()`/`length()`
* Reduce duplication, only allow template function in characteristic and remote value attr if the type is not a pointer (otherwise sizeof is useless). add appropriate notes
* clean up AttValue::setValue to remove unnecessary length parameter enabling requirement of non-pointer type
The connection handle was not initialized correctly when recording the subscibe status causing the call to send notification/indications to fail with BLE_HS_ENOTCONN.
Refactor attributes to reduce code duplication and improve maintainability.
* Add attribute base classes to provide common code.
* Add const where possible to functions and parameters.
* `NimBLECharacteristic::notify` no longer takes a `bool is_notification` parameter, instead `indicate()` should be called to send indications.
* `NimBLECharacteristic::indicate` now takes the same parameters as `notify`.
* `NimBLECharacteristicCallbacks` and `NimBLEDescriptorCallbacks` methods now take `const NimBLEConnInfo&` instead of non-const.
* `NimBLECharacteristic::onNotify` callback removed as unnecessary, the library does not call notify without app input.
* `NimBLERemoteCharacteristic::getRemoteService` now returns a `const NimBLERemoteService*` instead of non-const.
* Add NimBLEUUID constructor that takes a reference to `ble_uuid_any_t`.
* `NimBLERemoteService::getCharacteristics` now returns a `const std::vector<NimBLERemoteCharacteristic*>&` instead of non-const `std::vector<NimBLERemoteCharacteristic*>*`
* `NimBLERemoteService::getValue` now returns `NimBLEAttValue` instead of `std::string`
* `NimBLEService::getCharacteristics` now returns a `const std::vector<NimBLECharacteristic*>&` instead of a copy of std::vector<NimBLECharacteristic *>.
* Remove const requirement for NimBLEConnInfo parameter in callbacks.
Const is unnecessary as the data can't be changed by application code.
* Change NimBLERemoteCharacteristic::getRemoteService to return const pointer.
* msbFirst parameter has been removed from constructor as it was unnecessary,
caller should reverse the data first or call the new `reverseByteOrder` method after.
* `getNative` method replaced with `getBase` which returns a read-only pointer to the UUID size underlying.
* Added `reverseByteOrder` method, this will reverse the bytes of the UUID, which can be useful for advertising/logging.
* Added `getValue` method, which returns a read-only `uint8_t` pointer to the UUID value.
* Removed `m_valueSet` member variable, `bitSize()` can be used as a replacement.
* General code cleanup.
* Add length parameter to `setValue()` templates, with defaults for backward compatibility.
* Changed `setValue(const char*)` to add an optional length parameter so that a NULL character can be included, defaults to strlen.
* Moved non-inline functions to `NimBLEAttValue.cpp` file.
* Corrected includes to permit compilation as a stand-alone utility.
* Removed repeated code in `setValue()` by using `append()` after clearing the value.
* General code cleanup.
* Construct the device with the parameters from the advertisement in the initialization list.
* Removed no longer needed methods; setAddress, setAdvType, setRSSI, setSetId, setPrimaryPhy, setSecondaryPhy, setPeriodicInterval.
* Removed `hasRSSI()` method, the RSSI is always reported so this is redundant.
* Replace setPayload with new method; `update` which will update the device info when new advertisement data is received.
* getPayload now returns `const std::vector<uint8_t>` instead of a pointer to internal memory.
* Added `begin` and `end` read-only iterators for convienience and use in range loops.
* Timestamp removed, if needed then the app should track the time in the callback.
* Consolidate some functions to use getPayloadByType.
* Add optional index parameter to getPayloadByType.
* Change payload indexing to use 0 as the first item.
* Code cleanup and apply const correctness.
This simplifies the NimBLEAddress code by directly using the NimBLE core `ble_addr_t` type to hold the address
and allows using NimBLE core functions and macros to replace code in some methods.
* `getNative()` replaced with `getBase()` and now returns a pointer to `const ble_addr_t` instead of a pointer to the address value.
* Adds `isNrpa()` method to test if an address is random non-resolvable.
* Adds `isStatic()` method to test if an address is random static.
* Adds `isPublic()` method to test if an address is a public address.
* Adds `isNull()` methods to test if an address is NULL.
* Adds `getValue()` method which returns a read-only pointer to the address value.
* Adds `reverseByteOrder()` method which will reverse the byte order of the address value.
* `equals()` method and == operator will now also test if the address types are the same.
* Code cleanup.
* Replaces the use of std::list with a fixed array to track and manage created client instances.
* Removes: NimBLEDevice::getClientList
* Replaces: NimBLEDevice::getClientListSize with NimBLEDevice::getCreatedClientCount
Replaces all use of NIMBLE_LOGC with NIMBLE_LOGE and redefines NIMBLE_LOGC to use printf.
This allows NIMBLE_CPP_DEBUG_ASSERT messages to print event when log level filtering is set to none.
* Adds the NIMBLE_CPP_DEBUG_ASSERT macro that calls a weak function to allow user defined action, defaults to critical error message and aborts.
* Adds a config option to disable asserts using the NIMBLE_CPP_DEBUG_ASSERT macro.
* Adds a new method, getPeerName to NimBLEServer to read the name from the peers device name characteristic.
* Adds a setting to automatically get the name of the peer when connected and provide it as an additional parameter in the onConnect callback.
* Adds callback with client name after authentication as it may change.
