Extended advertisement data. More...

Public Member Functions
	NimBLEExtAdvertisement (uint8_t priPhy=BLE_HCI_LE_PHY_1M, uint8_t secPhy=BLE_HCI_LE_PHY_1M)
	Construct a BLE extended advertisement. More...

void	setAppearance (uint16_t appearance)
	Set the appearance. More...

void	setCompleteServices (const NimBLEUUID &uuid)
	Set a single service to advertise as a complete list of services. More...

void	setCompleteServices16 (const std::vector< NimBLEUUID > &v_uuid)
	Set the complete list of 16 bit services to advertise. More...

void	setCompleteServices32 (const std::vector< NimBLEUUID > &v_uuid)
	Set the complete list of 32 bit services to advertise. More...

void	setFlags (uint8_t flag)
	Set the advertisement flags. More...

void	setManufacturerData (const std::string &data)
	Set manufacturer specific data. More...

void	setURI (const std::string &uri)
	Set the URI to advertise. More...

void	setName (const std::string &name)
	Set the complete name of this device. More...

void	setPartialServices (const NimBLEUUID &uuid)
	Set a single service to advertise as a partial list of services. More...

void	setPartialServices16 (const std::vector< NimBLEUUID > &v_uuid)
	Set the partial list of services to advertise. More...

void	setPartialServices32 (const std::vector< NimBLEUUID > &v_uuid)
	Set the partial list of services to advertise. More...

void	setServiceData (const NimBLEUUID &uuid, const std::string &data)
	Set the service data (UUID + data) More...

void	setShortName (const std::string &name)
	Set the short name. More...

void	setData (const uint8_t *data, size_t length)
	Set the advertisement data. More...

void	addData (const std::string &data)
	Add data to the payload to be advertised. More...

void	addData (const uint8_t *data, size_t length)
	Add data to the payload to be advertised. More...

void	addTxPower ()
	Adds Tx power level to the advertisement data.

void	setPreferredParams (uint16_t min, uint16_t max)
	Set the preferred connection interval parameters. More...

void	setLegacyAdvertising (bool val)
	Sets wether the advertisement should use legacy (BLE 4.0, 31 bytes max) advertising. More...

void	setConnectable (bool val)
	Sets wether this advertisement should advertise as a connectable device. More...

void	setScannable (bool val)
	Sets wether the advertisement has scan response data available. More...

void	setMinInterval (uint32_t mininterval)
	Set the minimum advertising interval. More...

void	setMaxInterval (uint32_t maxinterval)
	Set the maximum advertising interval. More...

void	setPrimaryPhy (uint8_t phy)
	Set the primary advertising PHY to use. More...

void	setSecondaryPhy (uint8_t phy)
	Set the secondary advertising PHY to use. More...

void	setScanFilter (bool scanRequestWhitelistOnly, bool connectWhitelistOnly)
	Set the filtering for the scan filter. More...

void	setDirectedPeer (const NimBLEAddress &addr)
	Sets the peer to directly advertise to. More...

void	setDirected (bool val, bool high_duty=true)
	Enable or disable direct advertisements to the peer set with `NimBLEExtAdvertisement::setDirectedPeer` More...

void	setAnonymous (bool val)
	Sets whether the advertisement should be anonymous. More...

void	setPrimaryChannels (bool ch37, bool ch38, bool ch39)
	Sets The primary channels to advertise on. More...

void	setTxPower (int8_t dbm)
	Sets the transmission power level for this advertisement. More...

void	setAddress (const NimBLEAddress &addr)
	Set the address to use for this advertisement. More...

void	enableScanRequestCallback (bool enable)
	Sets whether the scan response request callback should be called. More...

void	clearData ()
	Clears the data stored in this instance, does not change settings. More...

size_t	getDataSize ()
	Get the size of the current data.

Detailed Description

Extended advertisement data.

Constructor & Destructor Documentation

◆ NimBLEExtAdvertisement()

NimBLEExtAdvertisement::NimBLEExtAdvertisement	(	uint8_t	priPhy = `BLE_HCI_LE_PHY_1M`,
		uint8_t	secPhy = `BLE_HCI_LE_PHY_1M`
	)

Construct a BLE extended advertisement.

Parameters

[in]	priPhy	The primary Phy to advertise on, can be one of: BLE_HCI_LE_PHY_1M BLE_HCI_LE_PHY_CODED
[in]	secPhy	The secondary Phy to advertise on, can be one of: BLE_HCI_LE_PHY_1M BLE_HCI_LE_PHY_2M BLE_HCI_LE_PHY_CODED

Member Function Documentation

◆ addData() [1/2]

void NimBLEExtAdvertisement::addData ( const std::string & data )

Add data to the payload to be advertised.

Parameters

[in] data The data to be added to the payload.

◆ addData() [2/2]

void NimBLEExtAdvertisement::addData	(	const uint8_t *	data,
		size_t	length
	)

Add data to the payload to be advertised.

Parameters

[in]	data	The data to be added to the payload.
[in]	length	The size of data to be added to the payload.

◆ clearData()

void NimBLEExtAdvertisement::clearData ( )

Clears the data stored in this instance, does not change settings.

This will clear all data but preserves advertising parameter settings.

◆ enableScanRequestCallback()

void NimBLEExtAdvertisement::enableScanRequestCallback ( bool enable )

Sets whether the scan response request callback should be called.

Parameters

[in] enable If true the scan response request callback will be called for this advertisement.

◆ setAddress()

void NimBLEExtAdvertisement::setAddress ( const NimBLEAddress & addr )

Set the address to use for this advertisement.

Parameters

[in] addr The address to use.

◆ setAnonymous()

void NimBLEExtAdvertisement::setAnonymous ( bool val )

Sets whether the advertisement should be anonymous.

Parameters

[in] val Set to true to enable anonymous advertising.

Anonymous advertising omits the device's address from the advertisement.

◆ setAppearance()

void NimBLEExtAdvertisement::setAppearance ( uint16_t appearance )

Set the appearance.

Parameters

[in] appearance The appearance code value.

◆ setCompleteServices()

void NimBLEExtAdvertisement::setCompleteServices ( const NimBLEUUID & uuid )

Set a single service to advertise as a complete list of services.

Parameters

[in] uuid The service to advertise.

◆ setCompleteServices16()

void NimBLEExtAdvertisement::setCompleteServices16 ( const std::vector< NimBLEUUID > & v_uuid )

Set the complete list of 16 bit services to advertise.

Parameters

[in] v_uuid A vector of 16 bit UUID's to advertise.

◆ setCompleteServices32()

void NimBLEExtAdvertisement::setCompleteServices32 ( const std::vector< NimBLEUUID > & v_uuid )

Set the complete list of 32 bit services to advertise.

Parameters

[in] v_uuid A vector of 32 bit UUID's to advertise.

◆ setConnectable()

void NimBLEExtAdvertisement::setConnectable ( bool val )

Sets wether this advertisement should advertise as a connectable device.

Parameters

[in] val True = connectable.

◆ setData()

void NimBLEExtAdvertisement::setData	(	const uint8_t *	data,
		size_t	length
	)

Set the advertisement data.

Parameters

[in]	data	The data to be set as the payload.
[in]	length	The size of data.

This will completely replace any data that was previously set.

◆ setDirected()

void NimBLEExtAdvertisement::setDirected	(	bool	val,
		bool	high_duty = `true`
	)

Enable or disable direct advertisements to the peer set with NimBLEExtAdvertisement::setDirectedPeer

Parameters

[in]	val	true = send directed advertisements to peer.
[in]	high_duty	true = use fast advertising rate, default - true.

◆ setDirectedPeer()

void NimBLEExtAdvertisement::setDirectedPeer ( const NimBLEAddress & addr )

Sets the peer to directly advertise to.

Parameters

[in] addr The address of the peer to direct the advertisements.

◆ setFlags()

void NimBLEExtAdvertisement::setFlags ( uint8_t flag )

Set the advertisement flags.

Parameters

[in]

flag

The flags to be set in the advertisement.

BLE_HS_ADV_F_DISC_LTD
BLE_HS_ADV_F_DISC_GEN
BLE_HS_ADV_F_BREDR_UNSUP - must always use with NimBLE

◆ setLegacyAdvertising()

void NimBLEExtAdvertisement::setLegacyAdvertising ( bool val )

Sets wether the advertisement should use legacy (BLE 4.0, 31 bytes max) advertising.

Parameters

[in] val true = using legacy advertising.

◆ setManufacturerData()

void NimBLEExtAdvertisement::setManufacturerData ( const std::string & data )

Set manufacturer specific data.

Parameters

[in] data The manufacturer data to advertise.

◆ setMaxInterval()

void NimBLEExtAdvertisement::setMaxInterval ( uint32_t maxinterval )

Set the maximum advertising interval.

Parameters

[in] maxinterval Maximum value for advertising interval in 0.625ms units, 0 = use default.

◆ setMinInterval()

void NimBLEExtAdvertisement::setMinInterval ( uint32_t mininterval )

Set the minimum advertising interval.

Parameters

[in] mininterval Minimum value for advertising interval in 0.625ms units, 0 = use default.

◆ setName()

void NimBLEExtAdvertisement::setName ( const std::string & name )

Set the complete name of this device.

Parameters

[in] name The name to advertise.

◆ setPartialServices()

void NimBLEExtAdvertisement::setPartialServices ( const NimBLEUUID & uuid )

Set a single service to advertise as a partial list of services.

Parameters

[in] uuid The service to advertise.

◆ setPartialServices16()

void NimBLEExtAdvertisement::setPartialServices16 ( const std::vector< NimBLEUUID > & v_uuid )

Set the partial list of services to advertise.

Parameters

[in] v_uuid A vector of 16 bit UUID's to advertise.

◆ setPartialServices32()

void NimBLEExtAdvertisement::setPartialServices32 ( const std::vector< NimBLEUUID > & v_uuid )

Set the partial list of services to advertise.

Parameters

[in] v_uuid A vector of 32 bit UUID's to advertise.

◆ setPreferredParams()

void NimBLEExtAdvertisement::setPreferredParams	(	uint16_t	min,
		uint16_t	max
	)

Set the preferred connection interval parameters.

Parameters

[in]	min	The minimum interval desired.
[in]	max	The maximum interval desired.

◆ setPrimaryChannels()

void NimBLEExtAdvertisement::setPrimaryChannels	(	bool	ch37,
		bool	ch38,
		bool	ch39
	)

Sets The primary channels to advertise on.

Parameters

[in]	ch37	Advertise on channel 37.
[in]	ch38	Advertise on channel 38.
[in]	ch39	Advertise on channel 39.

This will set a bitmask using the input parameters to allow different
combinations. If all inputs are false then all 3 channels will be used.

◆ setPrimaryPhy()

void NimBLEExtAdvertisement::setPrimaryPhy ( uint8_t phy )

Set the primary advertising PHY to use.

Parameters

[in]

phy

Can be one of following constants:

BLE_HCI_LE_PHY_1M
BLE_HCI_LE_PHY_CODED

◆ setScanFilter()

void NimBLEExtAdvertisement::setScanFilter	(	bool	scanRequestWhitelistOnly,
		bool	connectWhitelistOnly
	)

Set the filtering for the scan filter.

Parameters

[in]	scanRequestWhitelistOnly	If true, only allow scan requests from those on the white list.
[in]	connectWhitelistOnly	If true, only allow connections from those on the white list.

◆ setScannable()

void NimBLEExtAdvertisement::setScannable ( bool val )

Sets wether the advertisement has scan response data available.

Parameters

[in] val true = scan response is available.

◆ setSecondaryPhy()

void NimBLEExtAdvertisement::setSecondaryPhy ( uint8_t phy )

Set the secondary advertising PHY to use.

Parameters

[in]

phy

Can be one of following constants:

BLE_HCI_LE_PHY_1M
BLE_HCI_LE_PHY_2M
BLE_HCI_LE_PHY_CODED

◆ setServiceData()

void NimBLEExtAdvertisement::setServiceData	(	const NimBLEUUID &	uuid,
		const std::string &	data
	)

Set the service data (UUID + data)

Parameters

[in]	uuid	The UUID to set with the service data.
[in]	data	The data to be associated with the service data advertised.

◆ setShortName()

void NimBLEExtAdvertisement::setShortName ( const std::string & name )

Set the short name.

Parameters

[in] name The short name of the device.

◆ setTxPower()

void NimBLEExtAdvertisement::setTxPower ( int8_t dbm )

Sets the transmission power level for this advertisement.

Parameters

[in] dbm the transmission power to use in dbm.

The allowable value range depends on device hardware.
The ESP32C3 and ESP32S3 have a range of -27 to +18.

◆ setURI()

void NimBLEExtAdvertisement::setURI ( const std::string & uri )

Set the URI to advertise.

Parameters

[in] uri The uri to advertise.

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

◆ NimBLEExtAdvertisement()

Member Function Documentation

◆ addData() [1/2]

◆ addData() [2/2]

◆ clearData()

◆ enableScanRequestCallback()

◆ setAddress()

◆ setAnonymous()

◆ setAppearance()

◆ setCompleteServices()

◆ setCompleteServices16()

◆ setCompleteServices32()

◆ setConnectable()

◆ setData()

◆ setDirected()

◆ setDirectedPeer()

◆ setFlags()

◆ setLegacyAdvertising()

◆ setManufacturerData()

◆ setMaxInterval()

◆ setMinInterval()

◆ setName()

◆ setPartialServices()

◆ setPartialServices16()

◆ setPartialServices32()

◆ setPreferredParams()

◆ setPrimaryChannels()

◆ setPrimaryPhy()

◆ setScanFilter()

◆ setScannable()

◆ setSecondaryPhy()

◆ setServiceData()

◆ setShortName()

◆ setTxPower()

◆ setURI()