18 KiB

Raw Permalink Blame History

Migrating from Bluedroid to NimBLE

This guide describes the required changes to existing projects migrating from the original bluedroid API to NimBLE.

The changes listed here are only the required changes that must be made, and a short overview of options for migrating existing applications.

For more information on the improvements and additions please refer to the class documentation and Improvements and updates

General Changes
Server
Advertising
Client
Scanning
General Security
Configuration

General Information

Header Files

All classes are accessible by including NimBLEDevice.h in your application, no further headers need to be included.

(Mainly for Arduino) You may choose to include NimBLELog.h in your application if you want to use the NIMBLE_LOGx macros for debugging. These macros are used the same way as the ESP_LOGx macros.

Class Names

Class names remain the same as the original with the addition of a "Nim" prefix. For example BLEDevice is now NimBLEDevice and BLEServer is now NimBLEServer etc.

For convenience definitions have been added to allow applications to use either name for all classes this means no class names need to be changed in existing code and makes migrating easier.

BLE Addresses

BLEAddress (NimBLEAddress) When constructing an address the constructor now takes an (optional) uint8_t type parameter to specify the address type. Default is (0) Public static address.

For example BLEAddress addr(11:22:33:44:55:66, 1) will create the address object with an address type of: 1 (Random).

As this parameter is optional no changes to existing code are needed, it is mentioned here for information.

BLEAddress::getNative (NimBLEAddress::getNative) returns a uint8_t pointer to the native address byte array. In this library the address bytes are stored in reverse order from the original library. This is due to the way the NimBLE stack expects addresses to be presented to it. All other functions such as toString are not affected as the endian change is made within them.

Server API

Creating a BLEServer instance is the same as original, no changes required. For example BLEDevice::createServer() will work just as it did before.

BLEServerCallbacks (NimBLEServerCallbacks) has new methods for handling security operations.

BLEServerCallbacks::onConnect (NimBLEServerCallbacks::onConnect) only has a single callback declaration which takes an additional (required) parameter NimBLEConnInfo & connInfo, which has methods to get information about the connected peer.

void onConnect(NimBLEServer* pServer, NimBLEConnInfo& connInfo)`

BLEServerCallbacks::onDisconnect (NimBLEServerCallbacks::onDisconnect) only has a single callback declaration which takes 2 additional (required) parameters NimBLEConnInfo & connInfo, which provides information about the peer and int reason, which gives the reason code for disconnection.

void onDisconnect(NimBLEServer* pServer, NimBLEConnInfo& connInfo, int reason)`

BLEServerCallbacks::onMtuChanged (NimBLEServerCallbacks::onMtuChanged) takes the parameter NimBLEConnInfo & connInfo instead of esp_ble_gatts_cb_param_t, which has methods to get information about the connected peer.

onMTUChange(uint16_t MTU, NimBLEConnInfo& connInfo)

Note: All callback methods have default implementations which allows the application to implement only the methods applicable.

Services

Creating a BLEService (NimBLEService) instance is the same as original, no changes required. For example BLEServer::createService(SERVICE_UUID) will work just as it did before.

Characteristics

BLEService::createCharacteristic (NimBLEService::createCharacteristic) is used the same way as originally except the properties parameter has changed.

When creating a characteristic the properties are now set with NIMBLE_PROPERTY::XXXX instead of BLECharacteristic::XXXX.

Originally

BLECharacteristic::PROPERTY_READ |
BLECharacteristic::PROPERTY_WRITE

Is Now

NIMBLE_PROPERTY::READ |
NIMBLE_PROPERTY::WRITE

The full list of properties

NIMBLE_PROPERTY::READ
NIMBLE_PROPERTY::READ_ENC
NIMBLE_PROPERTY::READ_AUTHEN
NIMBLE_PROPERTY::READ_AUTHOR
NIMBLE_PROPERTY::WRITE
NIMBLE_PROPERTY::WRITE_NR
NIMBLE_PROPERTY::WRITE_ENC
NIMBLE_PROPERTY::WRITE_AUTHEN
NIMBLE_PROPERTY::WRITE_AUTHOR
NIMBLE_PROPERTY::BROADCAST
NIMBLE_PROPERTY::NOTIFY
NIMBLE_PROPERTY::INDICATE

Example:

BLECharacteristic *pCharacteristic = pService->createCharacteristic(
                                     CHARACTERISTIC_UUID,
                                     BLECharacteristic::PROPERTY_READ   |
                                     BLECharacteristic::PROPERTY_WRITE
                                     );

Needs to be changed to:

BLECharacteristic *pCharacteristic = pService->createCharacteristic(
                                     CHARACTERISTIC_UUID,
                                     NIMBLE_PROPERTY::READ |
                                     NIMBLE_PROPERTY::WRITE
                                    );

Characteristic callbacks

BLECharacteristicCallbacks (NimBLECharacteristicCallbacks) has a new method NimBLECharacteristicCallbacks::onSubscribe which is called when a client subscribes to notifications/indications.

BLECharacteristicCallbacks::onRead (NimBLECharacteristicCallbacks::onRead) only has a single callback declaration, which takes an additional (required) parameter of NimBLEConnInfo& connInfo, which provides connection information about the peer.

BLECharacteristicCallbacks::onWrite (NimBLECharacteristicCallbacks::onWrite) only has a single callback declaration, which takes an additional (required) parameter of NimBLEConnInfo& connInfo, which provides connection information about the peer.

BLECharacteristicCallbacks::onStatus (NimBLECharacteristicCallbacks::onStatus) has had the status parameter removed as it was unnecessary since the status code from the BLE stack was also provided. The status code for success is 0 for notifications and BLE_HS_EDONE for indications, any other value is an error.

Note: All callback methods have default implementations which allows the application to implement only the methods applicable.

BLECharacteristic::getData

Has been removed from the API. Originally this returned a uint8_t* to the internal data, which is volatile. To prevent possibly throwing exceptions this has been removed and NimBLECharacteristic::getValue should be used to get a copy of the data first which can then safely be accessed via pointer.

Example:

std::string value = pCharacteristic->getValue();
uint8_t *pData = (uint8_t*)value.data();

Alternatively use the getValue template:

my_struct_t myStruct = pChr->getValue<my_struct_t>();

Descriptors

Descriptors are now created using the NimBLECharacteristic::createDescriptor method.

BLE2902 or NimBLE2902 class has been removed. NimBLE automatically creates the 0x2902 descriptor if a characteristic has a notification or indication property assigned to it.

It was no longer useful to have a class for the 0x2902 descriptor as a new callback NimBLECharacteristicCallbacks::onSubscribe was added to handle callback functionality and the client subscription status is handled internally.

Note: Attempting to create a 0x2902 descriptor will trigger an assert to notify the error, allowing the creation of it would cause a fault in the NimBLE stack.

All other descriptors are now created just as characteristics are by using the NimBLECharacteristic::createDescriptor method (except 0x2904, see below). Which are defined as:

NimBLEDescriptor* createDescriptor(const char* uuid,
                                   uint32_t properties =
                                   NIMBLE_PROPERTY::READ |
                                   NIMBLE_PROPERTY::WRITE,
                                   uint16_t max_len = 100);

NimBLEDescriptor* createDescriptor(NimBLEUUID uuid,
                                   uint32_t properties =
                                   NIMBLE_PROPERTY::READ |
                                   NIMBLE_PROPERTY::WRITE,
                                   uint16_t max_len = 100);

Example

pDescriptor = pCharacteristic->createDescriptor("ABCD",
                                                NIMBLE_PROPERTY::READ |
                                                NIMBLE_PROPERTY::WRITE |
                                                NIMBLE_PROPERTY::WRITE_ENC,
                                                25);

Would create a descriptor with the UUID 0xABCD, publicly readable but only writable if paired/bonded (encrypted) and has a max value length of 25 bytes.

For the 0x2904, there is a special class that is created when you call `createDescriptor("2904").

The pointer returned is of the base class NimBLEDescriptor but the call will create the derived class of NimBLE2904 so you must cast the returned pointer to NimBLE2904 to access the specific class methods.

Example

p2904 = (NimBLE2904*)pCharacteristic->createDescriptor("2904");

Descriptor callbacks

BLEDescriptorCallbacks::onRead (NimBLEDescriptorCallbacks::onRead) BLEDescriptorCallbacks::onwrite (NimBLEDescriptorCallbacks::onwrite)

The above descriptor callbacks take an additional (required) parameter NimBLEConnInfo& connInfo, which contains the connection information of the peer.

Server Security

Security is set on the characteristic or descriptor properties by applying one of the following:

NIMBLE_PROPERTY::READ_ENC
NIMBLE_PROPERTY::READ_AUTHEN
NIMBLE_PROPERTY::READ_AUTHOR
NIMBLE_PROPERTY::WRITE_ENC
NIMBLE_PROPERTY::WRITE_AUTHEN
NIMBLE_PROPERTY::WRITE_AUTHOR

When a peer wants to read or write a characteristic or descriptor with any of these properties applied it will trigger the pairing process. By default the "just-works" pairing will be performed automatically.

This can be changed to use passkey authentication or numeric comparison. See Security API for details.

Advertising API

Advertising works the same as the original API except:

Calling NimBLEAdvertising::setAdvertisementData will entirely replace any data set with NimBLEAdvertising::addServiceUUID, or NimBLEAdvertising::setAppearance or similar methods. You should set all the data you wish to advertise within the NimBLEAdvertisementData instead.

BLEAdvertising::start (NimBLEAdvertising::start)

Now takes 2 optional parameters, the first is the duration to advertise for (in milliseconds), the second is a callback that is invoked when advertising ends and takes a pointer to a NimBLEAdvertising object (similar to the NimBLEScan::start API). This provides an opportunity to update the advertisement data if desired.

Client API

Client instances are created just as before with BLEDevice::createClient (NimBLEDevice::createClient).

Multiple client instances can be created, up to the maximum number of connections set in the config file (default: 3). To delete a client instance you must use NimBLEDevice::deleteClient.

BLEClient::connect(NimBLEClient::connect) Has had it's parameters altered. Defined as:

NimBLEClient::connect(bool deleteServices = true); NimBLEClient::connect(NimBLEAdvertisedDevice* device, bool deleteServices = true); NimBLEClient::connect(NimBLEAddress address, bool deleteServices = true);

The type parameter has been removed and a new bool parameter has been added to indicate if the client should delete the attribute database previously retrieved (if applicable) for the peripheral, default value is true.

If set to false the client will use the attribute database it retrieved from the peripheral when previously connected.

This allows for faster connections and power saving if the devices dropped connection and are reconnecting.

BLEClient::getServices (NimBLEClient::getServices)

This method now takes an optional (bool) parameter to indicate if the services should be retrieved from the server (true) or the currently known database returned (false : default). Also now returns a pointer to std::vector instead of std::map.

Removed: the automatic discovery of all peripheral attributes as they consumed time and resources for data the user may not be interested in.

Added: NimBLEClient::discoverAttributes for the user to discover all the peripheral attributes to replace the the removed automatic functionality.

Remote Services

BLERemoteService (NimBLERemoteService) Methods remain mostly unchanged with the exceptions of:

BLERemoteService::getCharacteristicsByHandle

This method has been removed.

BLERemoteService::getCharacteristics (NimBLERemoteService::getCharacteristics)

This method now takes an optional (bool) parameter to indicate if the characteristics should be retrieved from the server (true) or the currently known database returned (false : default). Also now returns a pointer to std::vector instead of std::map.

Remote Characteristics

BLERemoteCharacteristic (NimBLERemoteCharacteristic) There have been a few changes to the methods in this class:

BLERemoteCharacteristic::writeValue (NimBLERemoteCharacteristic::writeValue)

Now returns true or false to indicate success or failure so you can choose to disconnect or try again.

BLERemoteCharacteristic::registerForNotify

Has been removed.

NimBLERemoteCharacteristic::subscribe
NimBLERemoteCharacteristic::unsubscribe

Are the new methods added to replace it.

BLERemoteCharacteristic::readUInt8 (NimBLERemoteCharacteristic::readUInt8) BLERemoteCharacteristic::readUInt16 (NimBLERemoteCharacteristic::readUInt16) BLERemoteCharacteristic::readUInt32 (NimBLERemoteCharacteristic::readUInt32) BLERemoteCharacteristic::readFloat (NimBLERemoteCharacteristic::readFloat)

Are deprecated a template: NimBLERemoteCharacteristic::readValue<type\>(time_t\*, bool) has been added to replace them.

BLERemoteCharacteristic::readRawData

Has been removed from the API Originally it stored an unnecessary copy of the data and was returning a uint8_t pointer to volatile internal data. The user application should use NimBLERemoteCharacteristic::readValue or NimBLERemoteCharacteristic::getValue. To obtain a copy of the data, then cast the returned std::string to the type required such as:

std::string value = pChr->readValue();
uint8_t *data = (uint8_t*)value.data();

Alternatively use the readValue template:

my_struct_t myStruct = pChr->readValue<my_struct_t>();

BLERemoteCharacteristic::getDescriptors (NimBLERemoteCharacteristic::getDescriptors)

This method now takes an optional (bool) parameter to indicate if the descriptors should be retrieved from the server (true) or the currently known database returned (false : default). Also now returns a pointer to std::vector instead of std::map.

Client callbacks

BLEClientCallbacks::onDisconnect (NimBLEClientCallbacks::onDisconnect)

This now takes a second parameter int reason which provides the reason code for disconnection.

Client Security

The client will automatically initiate security when the peripheral responds that it's required. The default configuration will use "just-works" pairing with no bonding, if you wish to enable bonding see below.

BLE Scan

The scan API is mostly unchanged from the original except for NimBLEScan::start, in which the duration parameter is now in milliseconds instead of seconds.

Security API

Security operations have been moved to BLEDevice (NimBLEDevice).
The security callback methods are now incorporated in the NimBLEServerCallbacks / NimBLEClientCallbacks classes.

The callback methods are:

bool onConfirmPIN(uint32_t pin)

Receives the pin when using numeric comparison authentication, return true; to accept.

uint32_t onPassKeyRequest()

For server callback; return the passkey expected from the client. For client callback; return the passkey to send to the server.

void onAuthenticationComplete(NimBLEConnInfo& connInfo)

Authentication complete, success or failed information is available from the NimBLEConnInfo methods.

Security settings and IO capabilities are now set by the following methods of NimBLEDevice.

NimBLEDevice::setSecurityAuth(bool bonding, bool mitm, bool sc) NimBLEDevice::setSecurityAuth(uint8_t auth_req)

Sets the authorization mode for this device.

NimBLEDevice::setSecurityIOCap(uint8_t iocap)

Sets the Input/Output capabilities of this device.

NimBLEDevice::setSecurityInitKey(uint8_t init_key)

If we are the initiator of the security procedure this sets the keys we will distribute.

NimBLEDevice::setSecurityRespKey(uint8_t resp_key)

Sets the keys we are willing to accept from the peer during pairing.

Arduino Configuration

Unlike the original library pre-packaged in the esp32-arduino, this library has all the configuration options that are normally set in menuconfig available in the src/nimconfig.h file.

This allows Arduino users to fully customize the build, such as increasing max connections or loading the BLE stack into external PSRAM.

For details on the options, they are fully commented in nimconfig.h

18 KiB Raw Permalink Blame History

Migrating from Bluedroid to NimBLE

General Information

Header Files

Class Names

BLE Addresses

Server API

Services

Characteristics

Originally

Is Now

The full list of properties

Characteristic callbacks

Descriptors

Example

Example

Descriptor callbacks

Server Security

Advertising API

Client API

Remote Services

Remote Characteristics

Client callbacks

Client Security

BLE Scan

Security API

Arduino Configuration

18 KiB

Raw Permalink Blame History