esp-nimble-cpp/CHANGELOG.md

Changelog

All notable changes to this project will be documented in this file.

[1.3.2] - 2022-01-15

Fixed

• Initialize advertising complete callback in NimBLEAdvertising constructor.
• Clear client disconnect timer in constructor before initializing.
• Fix missing data when reading large values.
• Fix missing data in notifications when using a large MTU size and more than 270 bytes of data are sent.
• Workaround fix added for cases when the task notification value is not cleared, causing various functions that should block not to block.

Added

• NimBLEClient::getLastError : Gets the error code of the last function call that produces a return code from the stack.
• NimBLECharacteristic::notify : Overload method to send notifications/indications with custom values.
• Added conditional checks for ESP32 specific functions/values to support use of the library on non-esp32 devices.
• Added an alias to use the callback name from the original library onMtuChanged.
• NimBLEClient::setDataLen and NimBLEServer::setDataLen: Data length extension support (IDF version >= 4.3.2 only)
• Config option to set logging level for esp-nimble-cpp

Changed

• Critical section calls now use the NimBLE API instead of FreeRTOS directly. This removes the need for a portMUX_TYPE variable in the class definitions.
• Removed unnecessary variables in NimBLEService and changed the constructor no no longer accept numHandles and inst_id parameters.

[1.3.1] - 2021-08-04

Fixed

• Corrected a compiler/linker error when an application or a library uses bluetooth classic due to the redefinition of btInUse.

[1.3.0] - 2021-08-02

Added

• NimBLECharacteristic::removeDescriptor: Dynamically remove a descriptor from a characterisic. Takes effect after all connections are closed and sends a service changed indication.

• NimBLEService::removeCharacteristic: Dynamically remove a characteristic from a service. Takes effect after all connections are closed and sends a service changed indication

• NimBLEServerCallbacks::onMTUChange: This is callback is called when the MTU is updated after connection with a client.

• ESP32C3 support

• Whitelist API:

  • NimBLEDevice::whiteListAdd: Add a device to the whitelist.
  • NimBLEDevice::whiteListRemove: Remove a device from the whitelist.
  • NimBLEDevice::onWhiteList: Check if the device is on the whitelist.
  • NimBLEDevice::getWhiteListCount: Gets the size of the whitelist
  • NimBLEDevice::getWhiteListAddress: Get the address of a device on the whitelist by index value.

• Bond management API:

  • NimBLEDevice::getNumBonds: Gets the number of bonds stored.
  • NimBLEDevice::isBonded: Checks if the device is bonded.
  • NimBLEDevice::deleteAllBonds: Deletes all bonds.
  • NimBLEDevice::getBondedAddress: Gets the address of a bonded device by the index value.

• NimBLECharacteristic::getCallbacks to retrieve the current callback handler.

• Connection Information class: NimBLEConnInfo.

• NimBLEScan::clearDuplicateCache: This can be used to reset the cache of advertised devices so they will be immediately discovered again.

Changed

• FreeRTOS files have been removed as they are not used by the library.
• Services, characteristics and descriptors can now be created statically and added after.
• Excess logging and some asserts removed.
• Use ESP_LOGx macros to enable using local log level filtering.

Fixed

• NimBLECharacteristicCallbacks::onSubscribe Is now called after the connection is added to the vector.
• Corrected bonding failure when reinitializing the BLE stack.
• Writing to a characterisic with a std::string value now correctly writes values with null characters.
• Retrieving remote descriptors now uses the characterisic end handle correctly.
• Missing data in long writes to remote descriptors.
• Hanging on task notification when sending an indication from the characteristic callback.
• BLE controller memory could be released when using Arduino as a component.
• Complile errors with NimBLE release 1.3.0.

[1.2.0] - 2021-02-08

Added

• NimBLECharacteristic::getDescriptorByHandle: Return the BLE Descriptor for the given handle.

• NimBLEDescriptor::getStringValue: Get the value of this descriptor as a string.

• NimBLEServer::getServiceByHandle: Get a service by its handle.

• NimBLEService::getCharacteristicByHandle: Get a pointer to the characteristic object with the specified handle.

• NimBLEService::getCharacteristics: Get the vector containing pointers to each characteristic associated with this service.
  Overloads to get a vector containing pointers to all the characteristics in a service with the UUID. (supports multiple same UUID's in a service)

  • NimBLEService::getCharacteristics(const char *uuid)
  • NimBLEService::getCharacteristics(const NimBLEUUID &uuid)

• NimBLEAdvertisementData New methods:

  • NimBLEAdvertisementData::addTxPower: Adds transmission power to the advertisement.
  • NimBLEAdvertisementData::setPreferredParams: Adds connection parameters to the advertisement.
  • NimBLEAdvertisementData::setURI: Adds URI data to the advertisement.

• NimBLEAdvertising New methods:

  • NimBLEAdvertising::setName: Set the name advertised.
  • NimBLEAdvertising::setManufacturerData: Adds manufacturer data to the advertisement.
  • NimBLEAdvertising::setURI: Adds URI data to the advertisement.
  • NimBLEAdvertising::setServiceData: Adds service data to the advertisement.
  • NimBLEAdvertising::addTxPower: Adds transmission power to the advertisement.
  • NimBLEAdvertising::reset: Stops the current advertising and resets the advertising data to the default values.

• NimBLEDevice::setScanFilterMode: Set the controller duplicate filter mode for filtering scanned devices.

• NimBLEDevice::setScanDuplicateCacheSize: Sets the number of advertisements filtered before the cache is reset.

• NimBLEScan::setMaxResults: This allows for setting a maximum number of advertised devices stored in the results vector.

• NimBLEAdvertisedDevice New data retrieval methods added:

  • haveAdvInterval/getAdvInterval: checks if the interval is advertised / gets the advertisement interval value.

  • haveConnParams/getMinInterval/getMaxInterval: checks if the parameters are advertised / get min value / get max value.

  • haveURI/getURI: checks if a URI is advertised / gets the URI data.

  • haveTargetAddress/getTargetAddressCount/getTargetAddress(index): checks if a target address is present / gets a count of the addresses targeted / gets the address of the target at index.

Changed

• nimconfig.h (Arduino) is now easier to use.

• NimBLEServer::getServiceByUUID Now takes an extra parameter of instanceID to support multiple services with the same UUID.

• NimBLEService::getCharacteristic Now takes an extra parameter of instanceID to support multiple characteristics with the same UUID.

• NimBLEAdvertising Transmission power is no longer advertised by default and can be added to the advertisement by calling NimBLEAdvertising::addTxPower

• NimBLEAdvertising Custom scan response data can now be used without custom advertisment.

• NimBLEScan Now uses the controller duplicate filter.

• NimBLEAdvertisedDevice Has been refactored to store the complete advertisement payload and no longer parses the data from each advertisement.
  Instead the data will be parsed on-demand when the user application asks for specific data.

Fixed

• NimBLEHIDDevice Characteristics now use encryption, this resolves an issue with communicating with devices requiring encryption for HID devices.

[1.1.0] - 2021-01-20

Added

• NimBLEDevice::setOwnAddrType added to enable the use of random and random-resolvable addresses, by asukiaaa

• New examples for securing and authenticating client/server connections, by mblasee.

• NimBLEAdvertising::SetMinPreferred and NimBLEAdvertising::SetMinPreferred re-added.

• Conditional checks added for command line config options in nimconfig.h to support custom configuration in platformio.

• NimBLEClient::setValue Now takes an extra bool parameter response to enable the use of write with response (default = false).

• NimBLEClient::getCharacteristic(uint16_t handle) Enabling the use of the characteristic handle to be used to find the NimBLERemoteCharacteristic object.

• NimBLEHIDDevice class added by wakwak-koba.

• NimBLEServerCallbacks::onDisconnect overloaded callback added to provide a ble_gap_conn_desc parameter for the application
  to obtain information about the disconnected client.

• Conditional checks in nimconfig.h for command line defined macros to support platformio config settings.

Changed

• NimBLEAdvertising::start now returns a bool value to indicate success/failure.

• Some asserts were removed in NimBLEAdvertising::start and replaced with better return code handling and logging.

• If a host reset event occurs, scanning and advertising will now only be restarted if their previous duration was indefinite.

• NimBLERemoteCharacteristic::subscribe and NimBLERemoteCharacteristic::registerForNotify will now set the callback regardless of the existance of the CCCD and return true unless the descriptor write operation failed.

• Advertising tx power level is now sent in the advertisement packet instead of scan response.

• NimBLEScan When the scan ends the scan stopped flag is now set before calling the scan complete callback (if used)
  this allows the starting of a new scan from the callback function.

Fixed

• Sometimes NimBLEClient::connect would hang on the task block if no event arrived to unblock.
  A time limit has been added to timeout appropriately.

• When getting descriptors for a characterisic the end handle of the service was used as a proxy for the characteristic end
  handle. This would be rejected by some devices and has been changed to use the next characteristic handle as the end when possible.

• An exception could occur when deleting a client instance if a notification arrived while the attribute vectors were being
  deleted. A flag has been added to prevent this.

• An exception could occur after a host reset event when the host re-synced if the tasks that were stopped during the event did
  not finish processing. A yield has been added after re-syncing to allow tasks to finish before proceeding.

• Occasionally the controller would fail to send a disconnected event causing the client to indicate it is connected
  and would be unable to reconnect. A timer has been added to reset the host/controller if it expires.

• Occasionally the call to start scanning would get stuck in a loop on BLE_HS_EBUSY, this loop has been removed.

• 16bit and 32bit UUID's in some cases were not discovered or compared correctly if the device
  advertised them as 16/32bit but resolved them to 128bits. Both are now checked.

• FreeRTOS compile errors resolved in latest Ardruino core and IDF v3.3.

• Multiple instances of time() called inside critical sections caused sporadic crashes, these have been moved out of critical regions.

• Advertisement type now correctly set when using non-connectable (advertiser only) mode.

• Advertising payload length correction, now accounts for appearance.

• (Arduino) Ensure controller mode is set to BLE Only.

[1.0.2] - 2020-09-13

Changed

• NimBLEAdvertising::start Now takes 2 optional parameters, the first is the duration to advertise for (in seconds), the second is a
  callback that is invoked when advertsing ends and takes a pointer to a NimBLEAdvertising object (similar to the NimBLEScan::start API).

• (Arduino) Maximum BLE connections can now be altered by only changing the value of CONFIG_BT_NIMBLE_MAX_CONNECTIONS in nimconfig.h. Any changes to the controller max connection settings in sdkconfig.h will now have no effect when using this library.

• (Arduino) Revert the previous change to fix the advertising start delay. Instead a replacement fix that routes all BLE controller commands from
  a task running on core 0 (same as the controller) has been implemented. This improves response times and reliability for all BLE functions.

[1.0.1] - 2020-09-02

Added

• Empty NimBLEAddress constructor: NimBLEAddress() produces an address of 00:00:00:00:00:00 type 0.
• Documentation of the difference of NimBLEAddress::getNative vs the original bluedroid library.

Changed

• notify_callback typedef is now defined as std::function to enable the use of std::bind to call a class member function.

Fixed

• Fix advertising start delay when first called.

[1.0.0] - 2020-08-22

First stable release.

All the original library functionality is complete and many extras added with full documentation.