45 lines
1.4 KiB
C++
45 lines
1.4 KiB
C++
// MirroringSample - see https://github.com/FastLED/FastLED/wiki/Multiple-Controller-Examples for more info on
|
|
// using multiple controllers. In this example, we're going to set up four NEOPIXEL strips on four
|
|
// different pins, and show the same thing on all four of them, a simple bouncing dot/cyclon type pattern
|
|
|
|
#include <FastLED.h>
|
|
|
|
#define NUM_LEDS_PER_STRIP 60
|
|
CRGB leds[NUM_LEDS_PER_STRIP];
|
|
|
|
// For mirroring strips, all the "special" stuff happens just in setup. We
|
|
// just addLeds multiple times, once for each strip
|
|
void setup() {
|
|
// tell FastLED there's 60 NEOPIXEL leds on pin 4
|
|
FastLED.addLeds<NEOPIXEL, 4>(leds, NUM_LEDS_PER_STRIP);
|
|
|
|
// tell FastLED there's 60 NEOPIXEL leds on pin 5
|
|
FastLED.addLeds<NEOPIXEL, 5>(leds, NUM_LEDS_PER_STRIP);
|
|
|
|
// tell FastLED there's 60 NEOPIXEL leds on pin 6
|
|
FastLED.addLeds<NEOPIXEL, 6>(leds, NUM_LEDS_PER_STRIP);
|
|
|
|
// tell FastLED there's 60 NEOPIXEL leds on pin 7
|
|
FastLED.addLeds<NEOPIXEL, 7>(leds, NUM_LEDS_PER_STRIP);
|
|
}
|
|
|
|
void loop() {
|
|
for(int i = 0; i < NUM_LEDS_PER_STRIP; i++) {
|
|
// set our current dot to red
|
|
leds[i] = CRGB::Red;
|
|
FastLED.show();
|
|
// clear our current dot before we move on
|
|
leds[i] = CRGB::Black;
|
|
delay(100);
|
|
}
|
|
|
|
for(int i = NUM_LEDS_PER_STRIP-1; i >= 0; i--) {
|
|
// set our current dot to red
|
|
leds[i] = CRGB::Red;
|
|
FastLED.show();
|
|
// clear our current dot before we move on
|
|
leds[i] = CRGB::Black;
|
|
delay(100);
|
|
}
|
|
}
|