238 lines
6.7 KiB
C++
238 lines
6.7 KiB
C++
#define FASTLED_INTERNAL
|
|
#include "FastLED.h"
|
|
|
|
FASTLED_USING_NAMESPACE
|
|
|
|
#if 0
|
|
|
|
#if defined(FASTLED_AVR) && !defined(TEENSYDUINO) && !defined(LIB8_ATTINY)
|
|
extern "C" {
|
|
// the prescaler is set so that timer0 ticks every 64 clock cycles, and the
|
|
// the overflow handler is called every 256 ticks.
|
|
#define MICROSECONDS_PER_TIMER0_OVERFLOW (clockCyclesToMicroseconds(64 * 256))
|
|
|
|
typedef union { unsigned long _long; uint8_t raw[4]; } tBytesForLong;
|
|
// tBytesForLong FastLED_timer0_overflow_count;
|
|
volatile unsigned long FastLED_timer0_overflow_count=0;
|
|
volatile unsigned long FastLED_timer0_millis = 0;
|
|
|
|
LIB8STATIC void __attribute__((always_inline)) fastinc32 (volatile uint32_t & _long) {
|
|
uint8_t b = ++((tBytesForLong&)_long).raw[0];
|
|
if(!b) {
|
|
b = ++((tBytesForLong&)_long).raw[1];
|
|
if(!b) {
|
|
b = ++((tBytesForLong&)_long).raw[2];
|
|
if(!b) {
|
|
++((tBytesForLong&)_long).raw[3];
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
#if defined(__AVR_ATtiny24__) || defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__)
|
|
ISR(TIM0_OVF_vect)
|
|
#else
|
|
ISR(TIMER0_OVF_vect)
|
|
#endif
|
|
{
|
|
fastinc32(FastLED_timer0_overflow_count);
|
|
// FastLED_timer0_overflow_count++;
|
|
}
|
|
|
|
// there are 1024 microseconds per overflow counter tick.
|
|
unsigned long millis()
|
|
{
|
|
unsigned long m;
|
|
uint8_t oldSREG = SREG;
|
|
|
|
// disable interrupts while we read FastLED_timer0_millis or we might get an
|
|
// inconsistent value (e.g. in the middle of a write to FastLED_timer0_millis)
|
|
cli();
|
|
m = FastLED_timer0_overflow_count; //._long;
|
|
SREG = oldSREG;
|
|
|
|
return (m*(MICROSECONDS_PER_TIMER0_OVERFLOW/8))/(1000/8);
|
|
}
|
|
|
|
unsigned long micros() {
|
|
unsigned long m;
|
|
uint8_t oldSREG = SREG, t;
|
|
|
|
cli();
|
|
m = FastLED_timer0_overflow_count; // ._long;
|
|
#if defined(TCNT0)
|
|
t = TCNT0;
|
|
#elif defined(TCNT0L)
|
|
t = TCNT0L;
|
|
#else
|
|
#error TIMER 0 not defined
|
|
#endif
|
|
|
|
|
|
#ifdef TIFR0
|
|
if ((TIFR0 & _BV(TOV0)) && (t < 255))
|
|
m++;
|
|
#else
|
|
if ((TIFR & _BV(TOV0)) && (t < 255))
|
|
m++;
|
|
#endif
|
|
|
|
SREG = oldSREG;
|
|
|
|
return ((m << 8) + t) * (64 / clockCyclesPerMicrosecond());
|
|
}
|
|
|
|
void delay(unsigned long ms)
|
|
{
|
|
uint16_t start = (uint16_t)micros();
|
|
|
|
while (ms > 0) {
|
|
if (((uint16_t)micros() - start) >= 1000) {
|
|
ms--;
|
|
start += 1000;
|
|
}
|
|
}
|
|
}
|
|
|
|
#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
|
|
void init()
|
|
{
|
|
// this needs to be called before setup() or some functions won't
|
|
// work there
|
|
sei();
|
|
|
|
// on the ATmega168, timer 0 is also used for fast hardware pwm
|
|
// (using phase-correct PWM would mean that timer 0 overflowed half as often
|
|
// resulting in different millis() behavior on the ATmega8 and ATmega168)
|
|
#if defined(TCCR0A) && defined(WGM01)
|
|
sbi(TCCR0A, WGM01);
|
|
sbi(TCCR0A, WGM00);
|
|
#endif
|
|
|
|
// set timer 0 prescale factor to 64
|
|
#if defined(__AVR_ATmega128__)
|
|
// CPU specific: different values for the ATmega128
|
|
sbi(TCCR0, CS02);
|
|
#elif defined(TCCR0) && defined(CS01) && defined(CS00)
|
|
// this combination is for the standard atmega8
|
|
sbi(TCCR0, CS01);
|
|
sbi(TCCR0, CS00);
|
|
#elif defined(TCCR0B) && defined(CS01) && defined(CS00)
|
|
// this combination is for the standard 168/328/1280/2560
|
|
sbi(TCCR0B, CS01);
|
|
sbi(TCCR0B, CS00);
|
|
#elif defined(TCCR0A) && defined(CS01) && defined(CS00)
|
|
// this combination is for the __AVR_ATmega645__ series
|
|
sbi(TCCR0A, CS01);
|
|
sbi(TCCR0A, CS00);
|
|
#else
|
|
#error Timer 0 prescale factor 64 not set correctly
|
|
#endif
|
|
|
|
// enable timer 0 overflow interrupt
|
|
#if defined(TIMSK) && defined(TOIE0)
|
|
sbi(TIMSK, TOIE0);
|
|
#elif defined(TIMSK0) && defined(TOIE0)
|
|
sbi(TIMSK0, TOIE0);
|
|
#else
|
|
#error Timer 0 overflow interrupt not set correctly
|
|
#endif
|
|
|
|
// timers 1 and 2 are used for phase-correct hardware pwm
|
|
// this is better for motors as it ensures an even waveform
|
|
// note, however, that fast pwm mode can achieve a frequency of up
|
|
// 8 MHz (with a 16 MHz clock) at 50% duty cycle
|
|
|
|
#if defined(TCCR1B) && defined(CS11) && defined(CS10)
|
|
TCCR1B = 0;
|
|
|
|
// set timer 1 prescale factor to 64
|
|
sbi(TCCR1B, CS11);
|
|
#if F_CPU >= 8000000L
|
|
sbi(TCCR1B, CS10);
|
|
#endif
|
|
#elif defined(TCCR1) && defined(CS11) && defined(CS10)
|
|
sbi(TCCR1, CS11);
|
|
#if F_CPU >= 8000000L
|
|
sbi(TCCR1, CS10);
|
|
#endif
|
|
#endif
|
|
// put timer 1 in 8-bit phase correct pwm mode
|
|
#if defined(TCCR1A) && defined(WGM10)
|
|
sbi(TCCR1A, WGM10);
|
|
#elif defined(TCCR1)
|
|
#warning this needs to be finished
|
|
#endif
|
|
|
|
// set timer 2 prescale factor to 64
|
|
#if defined(TCCR2) && defined(CS22)
|
|
sbi(TCCR2, CS22);
|
|
#elif defined(TCCR2B) && defined(CS22)
|
|
sbi(TCCR2B, CS22);
|
|
#else
|
|
#warning Timer 2 not finished (may not be present on this CPU)
|
|
#endif
|
|
|
|
// configure timer 2 for phase correct pwm (8-bit)
|
|
#if defined(TCCR2) && defined(WGM20)
|
|
sbi(TCCR2, WGM20);
|
|
#elif defined(TCCR2A) && defined(WGM20)
|
|
sbi(TCCR2A, WGM20);
|
|
#else
|
|
#warning Timer 2 not finished (may not be present on this CPU)
|
|
#endif
|
|
|
|
#if defined(TCCR3B) && defined(CS31) && defined(WGM30)
|
|
sbi(TCCR3B, CS31); // set timer 3 prescale factor to 64
|
|
sbi(TCCR3B, CS30);
|
|
sbi(TCCR3A, WGM30); // put timer 3 in 8-bit phase correct pwm mode
|
|
#endif
|
|
|
|
#if defined(TCCR4A) && defined(TCCR4B) && defined(TCCR4D) /* beginning of timer4 block for 32U4 and similar */
|
|
sbi(TCCR4B, CS42); // set timer4 prescale factor to 64
|
|
sbi(TCCR4B, CS41);
|
|
sbi(TCCR4B, CS40);
|
|
sbi(TCCR4D, WGM40); // put timer 4 in phase- and frequency-correct PWM mode
|
|
sbi(TCCR4A, PWM4A); // enable PWM mode for comparator OCR4A
|
|
sbi(TCCR4C, PWM4D); // enable PWM mode for comparator OCR4D
|
|
#else /* beginning of timer4 block for ATMEGA1280 and ATMEGA2560 */
|
|
#if defined(TCCR4B) && defined(CS41) && defined(WGM40)
|
|
sbi(TCCR4B, CS41); // set timer 4 prescale factor to 64
|
|
sbi(TCCR4B, CS40);
|
|
sbi(TCCR4A, WGM40); // put timer 4 in 8-bit phase correct pwm mode
|
|
#endif
|
|
#endif /* end timer4 block for ATMEGA1280/2560 and similar */
|
|
|
|
#if defined(TCCR5B) && defined(CS51) && defined(WGM50)
|
|
sbi(TCCR5B, CS51); // set timer 5 prescale factor to 64
|
|
sbi(TCCR5B, CS50);
|
|
sbi(TCCR5A, WGM50); // put timer 5 in 8-bit phase correct pwm mode
|
|
#endif
|
|
|
|
#if defined(ADCSRA)
|
|
// set a2d prescale factor to 128
|
|
// 16 MHz / 128 = 125 KHz, inside the desired 50-200 KHz range.
|
|
// XXX: this will not work properly for other clock speeds, and
|
|
// this code should use F_CPU to determine the prescale factor.
|
|
sbi(ADCSRA, ADPS2);
|
|
sbi(ADCSRA, ADPS1);
|
|
sbi(ADCSRA, ADPS0);
|
|
|
|
// enable a2d conversions
|
|
sbi(ADCSRA, ADEN);
|
|
#endif
|
|
|
|
// the bootloader connects pins 0 and 1 to the USART; disconnect them
|
|
// here so they can be used as normal digital i/o; they will be
|
|
// reconnected in Serial.begin()
|
|
#if defined(UCSRB)
|
|
UCSRB = 0;
|
|
#elif defined(UCSR0B)
|
|
UCSR0B = 0;
|
|
#endif
|
|
}
|
|
};
|
|
#endif
|
|
|
|
#endif
|
|
|