* Added new method `NimBLEScan::setScanPhy` to enable/disable the PHY's to scan on.
* Added new method `NimBLEScan::setScanPeriod` which will allow for setting a scan restart timer in the controller.
* Updated `NimBLEScan::start` to allow the command to be sent with updated parameters if already scanning.
* Added extended scan example.
* Removed storing and restarting of the scan on host reset as it is more appropriate to call the scanEnded callback instead.
* General code cleanup.
* `NimBLEAdvertisementData` moved to it's own .h and .cpp files.
* Added new method, `NimBLEAdvertising::setPreferredParams` that takes the min and max preferred connection parameters as an alternative for `setMinPreferred` and `setMaxPreferred`.
* Added new method, `NimBLEAdvertising::setAdvertisingInterval` Sets the advertisement interval for min and max to the same value instead of calling `setMinInterval` and `setMaxInterval` separately if there is not value difference.
* `NimBLEAdvertisementData` payload is now stored in `std::vector<uint8_t>` instead of `std::string`.
* `NimBLEAdvertisementData::getPayload` now returns `std::vector<uint8_t>` instead of `std::string`.
* `NimBLEAdvertisementData::addData` now takes either a `std::vector<uint8_t>` or `uint8_t* + length` instead of `std::string` or `char + length`.
* `NimBLEAdvertisementData::setName` now takes an optional `bool` parameter to indicate if the name is complete or incomplete, default = complete.
* `NimBLEAdvertising::start` No longer takes a callback pointer parameter, instead the new method `NimBLEAdvertising::setAdvertisingCompleteCallback` should be used.
* `NimBLEAdvertising::setAdvertisementType` has been renamed to `NimBLEAdvertising::setConnectableMode` to better reflect it's function.
* `NimBLEAdvertising::setScanResponse` has been renamed to `NimBLEAdvertising::enableScanResponse` to better reflect it's function.
* Scan response is no longer enabled by default.
* Added new method, `NimBLEAdvertising::setDiscoverableMode` to allow applications to control the discoverability of the advertiser.
* Advertising the name and TX power of the device will no longer happen by default and should be set manually by the application.
* Added overload for `NimBLEAdvertising::setManufacturerData` that takes a `const uint8_t*` and , size_t` paramter.
* Added overload for `NimBLEAdvertising::setServiceData` that takes `const NimBLEUUID& uuid`, ` const uint8_t* data`, ` size_t length` as parameters.
* Added overload for `NimBLEAdvertising::setServiceData` that takes `const NimBLEUUID& uuid`, `const std::vector<uint8_t>&` as parameters.
* All `NimBLEAdvertisementData` functions that change data values now return `bool`, true = success.
* All `NimBLEAdvertising` functions that change data values now return `bool`, true = success.
* `NimBLEAdvertising::setMinPreferred` and `NimBLEAdvertising::setMaxPreferred` have been removed, use `NimBLEAdvertising::setPreferredParams` instead.
* All advertising data is now stored in instances of `NimBLEAdvertisingData` and vectors removed from `NimBLEAdvertising`.
* `NimBLEAdvertising::setAdvertisementData` and `NimBLEAdvertising::setScanResponseData` now return `bool`, true = success.
* Added new method, `NimBLEAdvertisementData::removeData`, which takes a parameter `uint8_t type`, the data type to remove.
* Added new method, `NimBLEAdvertisementData::toString`, which will print the data in hex.
* Added new method, `NimBLEAdvertising::getAdvertisementData`, which returns a reference to the currently set advertisement data.
* Added new method, `NimBLEAdvertising::getScanData`, which returns a reference to the currently set scan response data.
* Added overloads for `NimBLEAdvertising::removeServiceUUID` and `NimBLEAdvertisementData::removeServiceUUID` to accept a `const char*`
* Added new method, `NimBLEAdvertising::clearData`, which will clear the advertisement and scan response data.
This removes the ignore list feature as it can be implemented by the application if desired.
The scan will now ignore any device we are connected to already by checking for any connected client with the same peer address.
* General code cleanup
* `NimBLEScan::start` will no longer clear cache or results if scanning is already in progress.
* `NimBLEScan::clearResults` will now reset the vector capacity to 0.
* `NimBLEScan::stop` will no longer call the `onScanEnd` callback as the caller should know its been stopped when this is called.
* `NimBLEScan::clearDuplicateCache` has been removed as it was problematic and only for the esp32. Stop and start the scanner for the same effect.
* `NimBLEScan::start` takes a new bool parameter `restart`, default `true`, that will restart an already in progress scan and clear the duplicate filter so all devices will be discovered again.
* Scan response data that is received without advertisement first will now create the device and send a callback.
* Added new method: `NimBLEAdvertisedDevice::isScannable()` that returns true if the device is scannable.
* Added default callbacks for `NimBLEScanCallbacks`
* `NimBLEScanCallbacks` function signatures updated:
* - `onDiscovered` now takes a `const NimBLEAdvertisedDevice*`
* - `onResult` now takes a `const NimBLEAdvertisedDevice*`
* - `onScanEnd` now takes a `const NimBLEScanResults&` and `int reason`
* Added new erase overload: `NimBLEScan::erase(const NimBLEAdvertisedDevice* device)`
* `NimBLEScanResults::getDevice` methods now return `const NimBLEAdvertisedDevice*`
* `NimBLEScanResults` iterators are now `const_iterator`
* Adds parameters `asyncConnect` and `exchangeMTU` to `NimBLEClient::connect`, default values work as the original connect method.
* * `asyncConnect`; if true, will send the connect command and return immediately with a true value for successfully sending the command, else false.
* * `exchangeMTU`; if true will send the exchange MTU command upon connection, otherwise not and the application can choose to do this later via the `exchangeMTU` method.
* Adds `onMTUChange` callback to `NimBLEClientCallbacks`
* Add `NimBLEDevice::getConnectedClients()` which returns a vector of pointers to the currently connected client instances.
* Calling `NimBLEClient::connect` will no longer cancel already in progress connections.
* General code cleanup and rename variables to use a consistent style.
* Removes the disconnect timer and will use the BLE_GAP_EVENT_TERM_FAILURE event to handle failed disconnects.
* `NimBLEClient::getConnId` has been renamed to `getConnHandle` to be consistent with bluetooth terminology.
* `NimBLEClient::disconnect` now returns a `bool = true on success` instead of an int to be consistent with the rest of the library.
* `NimBLEClient::setPeerAddress` now returns a bool, true on success.
* `NimBLEClientCallbacks::onConfirmPIN` renamed to `NimBLEClientCallbacks::onConfirmPasskey` to be consistent with bluetooth terminology.
* `NimBLEClient::setDataLen` now returns bool, true if successful.
* `NimBLEClient::updateConnParams` now returns bool, true if successful.
* `NimBLEClient::getServices` now returns a const reference to std::vector<NimBLERemoteService*> instead of a pointer to the internal vector.
* General code cleanup
* `NimBLEDevice::getInitialized` renamed to `NimBLEDevice::isInitialized`.
* `NimBLEDevice::setPower` no longer takes the `esp_power_level_t` and `esp_ble_power_type_t`, instead only an integer value in dbm units is accepted.
* `NimBLEDevice::setPower` now returns a bool value, true = success.
* `NimBLEDevice::setMTU` now returns a bool value, true = success.
* `NimBLEDevice::injectConfirmPIN` renamed to `NimBLEDevice::injectConfirmPasskey` to use Bluetooth naming.
* Fixes crash if `NimBLEDevice::deinit` is called when the stack has not been initialized.
* Reverts 73f0277 as it would cause a crash when the NimBLEServer instance has a connection.
* `NimBLEDevice::getAddress` will now return the address currently in use.
* `NimBLEDevice::init` now returns a bool with `true` indicating success.
* `NimBLEDevice::deinit` now returns a bool with `true` inidicating success.
* `NimBLEDevice::setDeviceName` now returns a bool with `true` indicating success.
* `NimBLEDevice::setCustomGapHandler` now returns a bool with `true` indicating success.
* `NimBLEDevice::setOwnAddrType` now returns a bool with `true` indicating success.
* `NimBLEDevice::setOwnAddrType` will now correctly apply the provided address type for all devices.
* `NimBLEDevice::setOwnAddrType` no longer takes a `bool nrpa` parameter.
Refactor attributes to reduce code duplication and improve maintainability.
* Add attribute base classes to provide common code.
* Add const where possible to functions and parameters.
* `NimBLECharacteristic::notify` no longer takes a `bool is_notification` parameter, instead `indicate()` should be called to send indications.
* `NimBLECharacteristic::indicate` now takes the same parameters as `notify`.
* `NimBLECharacteristicCallbacks` and `NimBLEDescriptorCallbacks` methods now take `const NimBLEConnInfo&` instead of non-const.
* `NimBLECharacteristic::onNotify` callback removed as unnecessary, the library does not call notify without app input.
* `NimBLERemoteCharacteristic::getRemoteService` now returns a `const NimBLERemoteService*` instead of non-const.
* Add NimBLEUUID constructor that takes a reference to `ble_uuid_any_t`.
* `NimBLERemoteService::getCharacteristics` now returns a `const std::vector<NimBLERemoteCharacteristic*>&` instead of non-const `std::vector<NimBLERemoteCharacteristic*>*`
* `NimBLERemoteService::getValue` now returns `NimBLEAttValue` instead of `std::string`
* `NimBLEService::getCharacteristics` now returns a `const std::vector<NimBLECharacteristic*>&` instead of a copy of std::vector<NimBLECharacteristic *>.
* Remove const requirement for NimBLEConnInfo parameter in callbacks.
Const is unnecessary as the data can't be changed by application code.
* Change NimBLERemoteCharacteristic::getRemoteService to return const pointer.
* Replaces the use of std::list with a fixed array to track and manage created client instances.
* Removes: NimBLEDevice::getClientList
* Replaces: NimBLEDevice::getClientListSize with NimBLEDevice::getCreatedClientCount
* Adds a new method, getPeerName to NimBLEServer to read the name from the peers device name characteristic.
* Adds a setting to automatically get the name of the peer when connected and provide it as an additional parameter in the onConnect callback.
* Adds callback with client name after authentication as it may change.
* Make NimBLEConnInfo functions const.
* Update callback functions and update client to use new functions.
* Update examples.
* Update migration guide.
---------
Co-authored-by: Casey Smith <csmith@morningstarcorp.com>
This adds a callback that is called when a device is initially discovered.
It is always called wether scanning in passive or active mode. This allows
for active scanning to receive device detection information in the case where
the scan response is not sent/received.
This callback is optional, the application may decide to implement it or not.
This replaces NimBLEAdvertisedDeviceCallbacks with NimBLEScanCallbacks and adds a onScanEnd callback.
The callback parameter for NimBLEScan::start has been removed and the blocking overload for NimBLEScan::start
has been replaced by an overload of NimBLEScan::getResults with the same parameters.
Change the callback functions that receive a ble_gap_conn_desc pointer to instead receive a NimBLEConnInfo reference.
* Add a reason parameter to the server disconnect callback.
* Remove connect and disconnect callback that do not receive info parameters.
* Remove onRead and onWrite Characteristic callbacks that do not receive info parameters.
* Add info parameter to Descriptor onWrite and onRead callbacks.
* Add details to migration guide.
Removes the unnecessary NimBLECharacteristicCallbacks::Status enum and callback parameter from NimBLECharacteristic::onStatus.
This was maintained for compatibility with the Arduino BLE library and is not necessary as the return code from the stack is also provided.
* Update examples/docs.
Changes all functions that accept a time parameter to use milliseconds instead of seconds.
* Adds duration input to NimBLEDevice::startAdvertising and NimBLEServer::startAdvertising.
Adds support for advertising and connections with coded/2M PHY's.
Adds new classes `NimBLEExtAdvertising` and `NimBLEExtAdvertisement`.
When extended advertising is enabled the original advertising classes become unavailable and the new classes must be used.
Changed some return values for advertising methods for consistency with the new classes methods.
