Adds an index parameter to NimBLEAdvertisedDevice::getManufacturerData to allow for selecting from multiple instances in the advertisements.
Adds NimBLEAdvertisedDevice::getManufacturerDataCount to get the number of manufacturer data sets present in the advertised data.
If pairing is requested before performing an action on a protected attribute pairing could fail due to already being in progress.
This fix will wait for the result of the pairing process before proceeding with the action.
This replaces NimBLEAdvertisedDeviceCallbacks with NimBLEScanCallbacks and adds a onScanEnd callback.
The callback parameter for NimBLEScan::start has been removed and the blocking overload for NimBLEScan::start
has been replaced by an overload of NimBLEScan::getResults with the same parameters.
Change the callback functions that receive a ble_gap_conn_desc pointer to instead receive a NimBLEConnInfo reference.
* Add a reason parameter to the server disconnect callback.
* Remove connect and disconnect callback that do not receive info parameters.
* Remove onRead and onWrite Characteristic callbacks that do not receive info parameters.
* Add info parameter to Descriptor onWrite and onRead callbacks.
* Add details to migration guide.
Removes the unnecessary NimBLECharacteristicCallbacks::Status enum and callback parameter from NimBLECharacteristic::onStatus.
This was maintained for compatibility with the Arduino BLE library and is not necessary as the return code from the stack is also provided.
* Update examples/docs.
Removes the response parameter from remote characterisitc subscrible/unsubscribe functions
as a response is always required for this operation as per BLE specs.
Removes the deprecated functions from remote characteristic/desriptor.
* Update examples/docs.
Changes all functions that accept a time parameter to use milliseconds instead of seconds.
* Adds duration input to NimBLEDevice::startAdvertising and NimBLEServer::startAdvertising.
As per Bluetooth core specification we must write to 0x2902 descriptors with response request.
This change ensures the correct procedure is used.
Todo: Remove the "response" parameter from related functions.
Adds support for advertising and connections with coded/2M PHY's.
Adds new classes `NimBLEExtAdvertising` and `NimBLEExtAdvertisement`.
When extended advertising is enabled the original advertising classes become unavailable and the new classes must be used.
Changed some return values for advertising methods for consistency with the new classes methods.
When retrieving attribute handles using the 128bit base version of a 16 bit UUID some devices will
report "not found". This will attempt to convert the UUID to the 16bit version and try again.
* Adds `to16()` method to NimBLEUUID.
This is a specialized container class to hold BLE attribute values.
- Removes the use of std::string previously used to store the values.
- Allows for setting/getting/notifying values from std::string, std::vector<uint8_t>, Arduino String, const char*, and uint8_t buffers.
- Has operators retrieve the value as std::string, Arduino String, std::vector<uint8_t>, uint8_t* or char pointers.
- Includes iterators and subscript/random access operator.
- Introduces a max length parameter to the creation of server characteristics/descriptors to limit the size of the memory footprint.
- Nearly Seamless integration with existing code.
- Adds a config option to enable/disable timestamp storage when the value is updated.
- Adds a config option to specify the initial size of the value container if not specified in the constructor.
This causes task blocking to fail in client operations leading to exceptions and crashing.
This is a workaround for this situation and will need to be reworked properly in the future.
* Sets macros to allow compiling when Central role is enabled and Observer disabled, or Peripheral enabled and Broadcaster disabled.
* Adds a macro definition for CONFIG_NIMBLE_CPP_IDF to enable different include paths/functionality for IDF / Arduino.
This reverts a previous change @2e1d78ff that caused compiling/linking errors due to the redefinition of btInUse() when another linked library uses the Arduino bluetooth code.
This allows for adding and removing of characteristics and descriptors after initial setup of the server.
When used it will send a service changed notification to all clients.
The changes will not take effect until all clients have disconnected and advertising restarted.
This allows creating instances of services/characteristics and decriptors without
needing to call the parent createX() methods. This allows creation of the attibutes
within a class or other structure and the attributes can be linked to the parent by
calling the parent addX() method.
Additonally this increases the backward compatibility with the original bluedroid library
to further support user migration.
Previously we used the service end handle or, if available, the handle of the next characteristic in the service
as the end handle when retrieving the descriptors of a characteristic. This process would fail when connecting to some
devices if the characteristics were retrieved individually instead of all together. The cause of failure was requesting
a handle range that is out of characteristic scope which is also out of line with BLE
specifications.
The fix included in this is to set the end handles of the characteristics either after retrieving all the characteristics
in a service by using the next charactertistic definition handle or, if the characteristic was retrieved separately,
we retrieve the next characteristic just before retrieving the descriptors.
This allows for clearing the duplicate filter cache when required and will also clear it
automatically when starting a scan.
This is useful when unexpectedly disconnected from a device and attempting to reconnect.
Previously the scan filter would not report advertisements from a device if it was multi-connectable
and advertising while connected. The result was long delays until the device would be scanned again.
This resolves it by clearing the filter cache on each scan start/clearResults call
and adding a method to NimBLEScan for manually clearing the cache on demand.
* Add method to get all characteristics of a service
* Added method on NimBLEDescriptor to get the value out as a std::string
* Added methods to get things by handle where UUID could be used already.
* Added helper methods for getting a list of characteristics with a given UUID and service
* Demote the warning log for adding duplicate characteristics to a debug level log.
* Add methods to get services and characteristics using UUID + index
This prevents an exception when initializing a NimBLEAdvertising instance before calling NimBLEDevice::init().
The constructor calls reset() which calls stop(), if the stack was not yet initialized it will cause an exception.
Previous to this NimBLEAdvertising did not have some functionality that was in NimBLEAdvertisementData.
Also NimBLEAdvertisementData was missing functionality that exists in NimBLEAdvertising.
This resolves that by adding the missing functions to both classes.
Changed:
NimBLEAdvertising: Transmission power is no longer advertised by default and can be added to the advertisement by calling ::addTxPower()
Added:
- NimBLEAdvertising::setName
- NimBLEAdvertising::setManufacturerData
- NimBLEAdvertising::setURI
- NimBLEAdvertising::setServiceData
- NimBLEAdvertising::addTxPower
- NimBLEAdvertising::reset
- NimBLEAdvertisementData::addTxPower
- NimBLEAdvertisementData::setPreferredParams
- NimBLEAdvertisementData::setURI
Adds:
- setPartialServices16
- setPartialServices32
- setCompleteServices16
- setCompleteServices32
Each takes an input parameter of std::vector<NimBLEUUID> to allow for advertising multiple services with a simple interface.
* Add the option to change the scan filter mode through NimBLEDevice::setScanFilterMode
* Add the option to change the scan filter cache size through NimBLEDevice::setScanDuplicateCacheSize
* Refactor nimconfig to make it for doxygen use only.
* Adds setMaxResults to NimBLEScan to limit the number of advertised devices stored.
If set to 0 no devices will be stored in memory and only the callback will be invoked.
If set to 0xFF (default) stored devices will be unlimited. Any other value will be the limit.
* Uses the controller to filter duplicate devices from the scan results when wantDuplicates == false.
* Stores complete advertisement payload and only performs parsing on demand. The advertised data is no longer parsed automatically as it is discovered, instead it will be parsed to find only the data requested by the user application when it makes a call to do so. This saves processing time and approximately 2.4k in flash size, with the new methods listed below included.
Add more advertised device field methods:
* Adds haveAdvInterval/getAdvInterval - checks if the interval is advertised / gets the advertisement interval value.
* Adds haveConnParams/getMinInterval/getMaxInterval - checks if the parameters are advertised / get min value / get max value.
* Adds haveURI/getURI - checks if a URI is advertised / gets the URI data.
* Adds haveTargetAddress/getTargetAddressCount/getTargetAddress(index) - checks if a target address is present / gets a count of the addresses targeted / gets the address of the target at index.
- Added `READ_ENC` to the attribute of characteristics in 1812/2a4d
- Added `READ_ENC` and `WRITE_ENC` to the default values of properties of `createDescriptor()`
Connect should set m_pTaskData before calling ble_gap_connect in case of an early event.
Disconnect should check if the timer has already started before starting the timer so it does not reset it.
The timer should also be started before calling ble_gap_terminate in case of an early event that would cause the timer to start
after disconnection, resetting the host unnecessarily.
There is a chance to become disconnected before returning from the onConnect callback so the connection
status should be checked when returning from client connect.
In the case the controller become unresponsive, or does not comply with the timeout period,
this will ensure the application continues instead of potentially blocking forever.
Advertising start did not return a value to indicate success/failure,
this patch adds that functionality. In addition, more verbose logging of errors from
this function are provided with the removal of the related asserts.
* Minor code cleanup
m_duration member variable was not set previously which could trigger advertising to start if the
host was reset prior to the application calling start.
On some devices, searching for descriptors using the service end handle would return an invalid error.
This patch instead uses the handle of the next characteristic as the end handle (if available).
Previously when the host reset while scanning (if active prior) it would be restarted automatically.
This caused errors for some applications and has been removed since the event invokes the scan
ended callback for the app to take action. Instead scanning will now only be restarted if the duration
was indefinite and a callback was set for the advertisment events, this use case is less likely to have
a scan ended callback.
Advertising (if active prior) would be started without regard to it's previous state.
This has been corrected to only start advertising again if it was advertising for an idefinite time.
While deleting the client attribute database, if a notification occurs there is a possibility of
concurrency causing an exception. This fixes that by setting a flag before calling disconnect in
the deleteClient function to prevent processing further notifications.
This change is needed to allow any tasks that were stopped during a host reset to finish
before resuming from the re-sync. This would occasionally result in a LoadStoreError exception
if not done.
If we client just connected and a notification comes before deleting services it could cause an exception
when accessing a vector that is being deleted. This will check the connection established flag before
processing of notifications.
If a connection event was sent but failed to establish then the disconnect
callback would be triggered when the application was not yet informed of the connection.
* Cleanup logs and add comments.
* Handle the return codes from ble_gap_connect to take proper actions for different codes.
* Improve client event handling to accomodate delayed PDU responses.
* Use connection ID as a replacement for the isConnected flag. Also check if a task is waiting for
results instead of the waitingToConnect flag.
* Adds a disconnect timer so that calling disconnect will start a timer for the connection
supervision timeout time + a small delay. When this expires it will reset the host if a disconnect event
does not occur in this time. This is added as a workaround for the occasional situation
when the controller does not send an event after the disconnect command.
The BLE_HS_EBUSY return code was causing the application to hang when starting scan as
occasionally the code would not change, resulting in an infinite loop.
This patch handles the return code more appopriately and removes the loop.
Additionally a race condition would sometimes allow the code to execute past the conditional checks
and clear the advertised device vector while a scan was active and writing to it causing an exception.
This has been hopefully corrected by only clearing the vector if the return code from starting the scan is 0.
* Some peripherals will advertise 16/32bit UUIDs but when queried for their handles
they do not convert the UUID to 128 bit locally and will return attribute not found.
This patch will query the peripheral a second time with a 128bit converted UUID.
- This changes NimBLERemoteCharacteristic::subscribe and NimBLERemoteCharacteristic::registerForNotify functionality
such that the notification callback will always be set.
Additionally these methods will always return true unless the descriptor write fails.
This allows for notifications to trigger the callback when a peer device sends them and does not have a CCCD.
Also it should not be flagged as a failure if the CCCD does not exist.
It should only be flagged when an acutal write operation fails.
* Fix for random notify crash in ISR context
Tested for stability over 30 minutes with a daisy chain of 3 esp32
Co-authored-by: h2zero <powellperalta@gmail.com>
* Adds functionality to advertise for a set duration, similar to NimBLEScan::start.
The first parameter being the duration (in seconds).
The second parameter is a pointer to a callback function that is invoked when advertising stops.
* NimBLEAdvertising::isAdvertising method added, returns true if advertising is currently active.
* These methods were noop's and are now removed due to lack of usefulness and advertisment space consumed if used.
Applications can still manually set these values if desired using NimBLEAdvertisementData::addData.
* The type is available in the NimBLEAddress parameter, no longer needed separately.
Co-authored-by: wakwak-koba <wakwak-koba@users.noreply.github.com>
